- Feb 11, 2017
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Here are some last-minute fixes: two fixes for races in ALSA sequencer queue spotted by syzkaller, a revert for a regression of LINE6 driver (since 4.9), and a trivial new codec ID addition for Nvidia HDMI" * tag 'sound-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - adding a new NV HDMI/DP codec ID in the driver ALSA: seq: Fix race at creating a queue Revert "ALSA: line6: Only determine control port properties if needed" ALSA: seq: Don't handle loop timeout at snd_seq_pool_done()
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd revert from Bruce Fields: "This patch turned out to have a couple problems. The problems are fixable, but at least one of the fixes is a little ugly. The original bug has always been there, so we can wait another week or two to get this right" * tag 'nfsd-4.10-3' of git://linux-nfs.org/~bfields/linux: nfsd: Revert "nfsd: special case truncates some more"
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes friom Michael Ellerman: "Apologies for the late pull request, but Ben has been busy finding bugs. - Userspace was semi-randomly segfaulting on radix due to us incorrectly handling a fault triggered by autonuma, caused by a patch we merged earlier in v4.10 to prevent the kernel executing userspace. - We weren't marking host IPIs properly for KVM in the OPAL ICP backend. - The ERAT flushing on radix was missing an isync and was incorrectly marked as DD1 only. - The powernv CPU hotplug code was missing a wakeup type and failing to flush the interrupt correctly when using OPAL ICP Thanks to Benjamin Herrenschmidt" * tag 'powerpc-4.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv: Properly set "host-ipi" on IPIs powerpc/powernv: Fix CPU hotplug to handle waking on HVI powerpc/mm/radix: Update ERAT flushes when invalidating TLB powerpc/mm: Fix spurrious segfaults on radix with autonuma
-
- Feb 10, 2017
-
-
J. Bruce Fields authored
This patch incorrectly attempted nested mnt_want_write, and incorrectly disabled nfsd's owner override for truncate. We'll fix those problems and make another attempt soon, for the moment I think the safest is to revert. Signed-off-by:
J. Bruce Fields <bfields@redhat.com>
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "This should be the final set of drm fixes for 4.10: one vmwgfx boot fix, one vc4 fix, and a few i915 fixes: * tag 'drm-fixes-for-v4.10-rc8' of git://people.freedesktop.org/~airlied/linux: drm: vc4: adapt to new behaviour of drm_crtc.c drm/i915: Always convert incoming exec offsets to non-canonical drm/i915: Remove overzealous fence warn on runtime suspend drm/i915/bxt: Add MST support when do DPLL calculation drm/i915: don't warn about Skylake CPU - KabyPoint PCH combo drm/i915: fix i915 running as dom0 under Xen drm/i915: Flush untouched framebuffers before display on !llc drm/i915: fix use-after-free in page_flip_completed() drm/vmwgfx: Fix depth input into drm_mode_legacy_fb_format
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes Hopefully final fixes for v4.10, about half of them stable material. * tag 'drm-intel-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: Always convert incoming exec offsets to non-canonical drm/i915: Remove overzealous fence warn on runtime suspend drm/i915/bxt: Add MST support when do DPLL calculation drm/i915: don't warn about Skylake CPU - KabyPoint PCH combo drm/i915: fix i915 running as dom0 under Xen drm/i915: Flush untouched framebuffers before display on !llc drm/i915: fix use-after-free in page_flip_completed()
-
git://anongit.freedesktop.org/git/drm-miscDave Airlie authored
Last-minute vc4 fix for 4.10. * tag 'drm-misc-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-misc: drm: vc4: adapt to new behaviour of drm_crtc.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target fixes from Nicholas Bellinger: "This target series for v4.10 contains fixes which address a few long-standing bugs that DATERA's QA + automation teams have uncovered while putting v4.1.y target code into production usage. We've been running the top three in our nightly automated regression runs for the last two months, and the COMPARE_AND_WRITE fix Mr. Gary Guo has been manually verifying against a four node ESX cluster this past week. Note all of them have CC' stable tags. Summary: - Fix a bug with ESX EXTENDED_COPY + SAM_STAT_RESERVATION_CONFLICT status, where target_core_xcopy.c logic was incorrectly returning SAM_STAT_CHECK_CONDITION for all non SAM_STAT_GOOD cases (Nixon Vincent) - Fix a TMR LUN_RESET hung task bug while other in-flight TMRs are being aborted, before the new one had been dispatched into tmr_wq (Rob Millner) - Fix a long standing double free OOPs, where a dynamically generated 'demo-mode' NodeACL has multiple sessions associated with it, and the /sys/kernel/config/target/$FABRIC/$WWN/ subsequently disables demo-mode, but never converts the dynamic ACL into a explicit ACL (Rob Millner) - Fix a long standing reference leak with ESX VAAI COMPARE_AND_WRITE when the second phase WRITE COMMIT command fails, resulting in CHECK_CONDITION response never being sent and se_cmd->cmd_kref never reaching zero (Gary Guo) Beyond these items on v4.1.y we've reproduced, fixed, and run through our regression test suite using iscsi-target exports, there are two additional outstanding list items: - Remove a >= v4.2 RCU conversion BUG_ON that would trigger when dynamic node NodeACLs where being converted to explicit NodeACLs. The patch drops the BUG_ON to follow how pre RCU conversion worked for this special case (Benjamin Estrabaud) - Add ibmvscsis target_core_fabric_ops->max_data_sg_nent assignment to match what IBM's Virtual SCSI hypervisor is already enforcing at transport layer. (Bryant Ly + Steven Royer)" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: ibmvscsis: Add SGL limit target: Fix COMPARE_AND_WRITE ref leak for non GOOD status target: Fix multi-session dynamic se_node_acl double free OOPs target: Fix early transport_generic_handle_tmr abort scenario target: Use correct SCSI status during EXTENDED_COPY exception target: Don't BUG_ON during NodeACL dynamic -> explicit conversion
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull pstore fix from Kees Cook: "Fix pstore regression (boot Oops) when ftrace disabled, from Brian Norris" * tag 'pstore-v4.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore: don't OOPS when there are no ftrace zones
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: "A fix for a crash in uinput, and a fix for build errors when HID-RMI is built-in but SERIO is a module" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics-rmi4 - select 'SERIO' when needed Input: uinput - fix crash when mixing old and new init style
-
Brian Norris authored
We'll OOPS in ramoops_get_next_prz() if the platform didn't ask for any ftrace zones (i.e., cxt->fprzs will be NULL). Let's just skip this entire FTRACE section if there's no 'fprzs'. Regression seen on a coreboot/depthcharge-based Chromebook. Fixes: 2fbea82b ("pstore: Merge per-CPU ftrace records into one") Cc: Joel Fernandes <joelaf@google.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
Kees Cook <keescook@chromium.org>
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO fix from Alex Williamson: "Fix regression in attaching groups to existing container for SPAPR IOMMU backend (Alexey Kardashevskiy)" * tag 'vfio-v4.10-final' of git://github.com/awilliam/linux-vfio: vfio/spapr_tce: Set window when adding additional groups to container
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "A couple more fixes for 4.10: - fix addressing the short regset write issue (Dave Martin) - fix for LPAE systems which leave a pending imprecise data abort before entering the kernel (Alexander Sverdlin)" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8643/3: arm/ptrace: Preserve previous registers for short regset write ARM: 8642/1: LPAE: catch pending imprecise abort on unmask
-
- Feb 09, 2017
-
-
Hui Wang authored
Without this change, the HDMI/DP codec will be recognised as a generic codec, and there is no sound when playing through this codec. As suggested by NVidia side, after adding the new ID in the driver, the sound playing works well. Cc: <stable@vger.kernel.org> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Benjamin Herrenschmidt authored
Otherwise KVM will fail to pass them through to the host Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Benjamin Herrenschmidt authored
The IPIs come in as HVI not EE, so we need to test the appropriate SRR1 bits. The encoding is such that it won't have false positives on P7 and P8 so we can just test it like that. We also need to handle the icp-opal variant of the flush. Fixes: d7436188 ("powerpc/xics: Add ICP OPAL backend") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Benjamin Herrenschmidt authored
Three tiny changes to the ERAT flushing logic: First don't make it depend on DD1. It hasn't been decided yet but we might run DD2 in a mode that also requires explicit flushes for performance reasons so make it unconditional. We also add a missing isync, and finally remove the flush from _tlbiel_va as it is only necessary for congruence-class invalidations (PID, LPID and full TLB), not targetted invalidations. Fixes: 96ed1fe5 ("powerpc/mm/radix: Invalidate ERAT on tlbiel for POWER9 DD1") Cc: stable@vger.kernel.org # v4.9+ Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Linus Torvalds authored
This reverts commit 020eb3da . Gabriel C reports that it causes his machine to not boot, and we haven't tracked down the reason for it yet. Since the bug it fixes has been around for a longish time, we're better off reverting the fix for now. Gabriel says: "It hangs early and freezes with a lot RCU warnings. I bisected it down to : > Ruslan Ruslichenko (1): > x86/ioapic: Restore IO-APIC irq_chip retrigger callback Reverting this one fixes the problem for me.. The box is a PRIMERGY TX200 S5 , 2 socket , 2 x E5520 CPU(s) installed" and Ruslan and Thomas are currently stumped. Reported-and-bisected-by:
Gabriel C <nix.or.die@gmail.com> Cc: Ruslan Ruslichenko <rruslich@cisco.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org # for the backport of the original commit Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Daney authored
This reverts commit 2cc75154 . With this commit in place I get on a Cavium ThunderX (arm64) system: $ if=/dev/hwrng bs=256 count=1 | od -t x1 -A x -v > rng-bad.txt 1+0 records in 1+0 records out 256 bytes (256 B) copied, 9.1171e-05 s, 2.8 MB/s $ dd if=/dev/hwrng bs=256 count=1 | od -t x1 -A x -v >> rng-bad.txt 1+0 records in 1+0 records out 256 bytes (256 B) copied, 9.6141e-05 s, 2.7 MB/s $ cat rng-bad.txt 000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000050 00 00 00 00 37 20 46 ae d0 fc 1c 55 25 6e b0 b8 000060 7c 7e d7 d4 00 0f 6f b2 91 1e 30 a8 fa 3e 52 0e 000070 06 2d 53 30 be a1 20 0f aa 56 6e 0e 44 6e f4 35 000080 b7 6a fe d2 52 70 7e 58 56 02 41 ea d1 9c 6a 6a 000090 d1 bd d8 4c da 35 45 ef 89 55 fc 59 d5 cd 57 ba 0000a0 4e 3e 02 1c 12 76 43 37 23 e1 9f 7a 9f 9e 99 24 0000b0 47 b2 de e3 79 85 f6 55 7e ad 76 13 4f a0 b5 41 0000c0 c6 92 42 01 d9 12 de 8f b4 7b 6e ae d7 24 fc 65 0000d0 4d af 0a aa 36 d9 17 8d 0e 8b 7a 3b b6 5f 96 47 0000e0 46 f7 d8 ce 0b e8 3e c6 13 a6 2c b6 d6 cc 17 26 0000f0 e3 c3 17 8e 9e 45 56 1e 41 ef 29 1a a8 65 c8 3a 000100 000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000050 00 00 00 00 f4 90 65 aa 8b f2 5e 31 01 53 b4 d4 000060 06 c0 23 a2 99 3d 01 e4 b0 c1 b1 55 0f 80 63 cf 000070 33 24 d8 3a 1d 5e cd 2c ba c0 d0 18 6f bc 97 46 000080 1e 19 51 b1 90 15 af 80 5e d1 08 0d eb b0 6c ab 000090 6a b4 fe 62 37 c5 e1 ee 93 c3 58 78 91 2a d5 23 0000a0 63 50 eb 1f 3b 84 35 18 cf b2 a4 b8 46 69 9e cf 0000b0 0c 95 af 03 51 45 a8 42 f1 64 c9 55 fc 69 76 63 0000c0 98 9d 82 fa 76 85 24 da 80 07 29 fe 4e 76 0c 61 0000d0 ff 23 94 4f c8 5c ce 0b 50 e8 31 bc 9d ce f4 ca 0000e0 be ca 28 da e6 fa cc 64 1c ec a8 41 db fe 42 bd 0000f0 a0 e2 4b 32 b4 52 ba 03 70 8e c1 8e d0 50 3a c6 000100 To my untrained mental entropy detector, the first several bytes of each read from /dev/hwrng seem to not be very random (i.e. all zero). When I revert the patch (apply this patch), I get back to what we have in v4.9, which looks like (much more random appearing): $ dd if=/dev/hwrng bs=256 count=1 | od -t x1 -A x -v > rng-good.txt 1+0 records in 1+0 records out 256 bytes (256 B) copied, 0.000252233 s, 1.0 MB/s $ dd if=/dev/hwrng bs=256 count=1 | od -t x1 -A x -v >> rng-good.txt 1+0 records in 1+0 records out 256 bytes (256 B) copied, 0.000113571 s, 2.3 MB/s $ cat rng-good.txt 000000 75 d1 2d 19 68 1f d2 26 a1 49 22 61 66 e8 09 e5 000010 e0 4e 10 d0 1a 2c 45 5d 59 04 79 8e e2 b7 2c 2e 000020 e8 ad da 34 d5 56 51 3d 58 29 c7 7a 8e ed 22 67 000030 f9 25 b9 fb c6 b7 9c 35 1f 84 21 35 c1 1d 48 34 000040 45 7c f6 f1 57 63 1a 88 38 e8 81 f0 a9 63 ad 0e 000050 be 5d 3e 74 2e 4e cb 36 c2 01 a8 14 e1 38 e1 bb 000060 23 79 09 56 77 19 ff 98 e8 44 f3 27 eb 6e 0a cb 000070 c9 36 e3 2a 96 13 07 a0 90 3f 3b bd 1d 04 1d 67 000080 be 33 14 f8 02 c2 a4 02 ab 8b 5b 74 86 17 f0 5e 000090 a1 d7 aa ef a6 21 7b 93 d1 85 86 eb 4e 8c d0 4c 0000a0 56 ac e4 45 27 44 84 9f 71 db 36 b9 f7 47 d7 b3 0000b0 f2 9c 62 41 a3 46 2b 5b e3 80 63 a4 35 b5 3c f4 0000c0 bc 1e 3a ad e4 59 4a 98 6c e8 8d ff 1b 16 f8 52 0000d0 05 5c 2f 52 2a 0f 45 5b 51 fb 93 97 a4 49 4f 06 0000e0 f3 a0 d1 1e ba 3d ed a7 60 8f bb 84 2c 21 94 2d 0000f0 b3 66 a6 61 1e 58 30 24 85 f8 c8 18 c3 77 00 22 000100 000000 73 ca cc a1 d9 bb 21 8d c3 5c f3 ab 43 6d a7 a4 000010 4a fd c5 f4 9c ba 4a 0f b1 2e 19 15 4e 84 26 e0 000020 67 c9 f2 52 4d 65 1f 81 b7 8b 6d 2b 56 7b 99 75 000030 2e cd d0 db 08 0c 4b df f3 83 c6 83 00 2e 2b b8 000040 0f af 61 1d f2 02 35 74 b5 a4 6f 28 f3 a1 09 12 000050 f2 53 b5 d2 da 45 01 e5 12 d6 46 f8 0b db ed 51 000060 7b f4 0d 54 e0 63 ea 22 e2 1d d0 d6 d0 e7 7e e0 000070 93 91 fb 87 95 43 41 28 de 3d 8b a3 a8 8f c4 9e 000080 30 95 12 7a b2 27 28 ff 37 04 2e 09 7c dd 7c 12 000090 e1 50 60 fb 6d 5f a8 65 14 40 89 e3 4c d2 87 8f 0000a0 34 76 7e 66 7a 8e 6b a3 fc cf 38 52 2e f9 26 f0 0000b0 98 63 15 06 34 99 b2 88 4f aa d8 14 88 71 f1 81 0000c0 be 51 11 2b f4 7e a0 1e 12 b2 44 2e f6 8d 84 ea 0000d0 63 82 2b 66 b3 9a fd 08 73 5a c2 cc ab 5a af b1 0000e0 88 e3 a6 80 4b fc db ed 71 e0 ae c0 0a a4 8c 35 0000f0 eb 89 f9 8a 4b 52 59 6f 09 7c 01 3f 56 e7 c7 bf 000100 Signed-off-by:
David Daney <david.daney@cavium.com> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge fixes from Andrew Morton: "4 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/slub.c: fix random_seq offset destruction cpumask: use nr_cpumask_bits for parsing functions mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers kernel/ucount.c: mark user_header with kmemleak_ignore()
-
Sean Rees authored
Commit 210e7a43 ("mm: SLUB freelist randomization") broke USB hub initialisation as described in https://bugzilla.kernel.org/show_bug.cgi?id=177551. Bail out early from init_cache_random_seq if s->random_seq is already initialised. This prevents destroying the previously computed random_seq offsets later in the function. If the offsets are destroyed, then shuffle_freelist will truncate page->freelist to just the first object (orphaning the rest). Fixes: 210e7a43 ("mm: SLUB freelist randomization") Link: http://lkml.kernel.org/r/20170207140707.20824-1-sean@erifax.org Signed-off-by:
Sean Rees <sean@erifax.org> Reported-by:
<userwithuid@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Thomas Garnier <thgarnie@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Tejun Heo authored
Commit 513e3d2d ("cpumask: always use nr_cpu_ids in formatting and parsing functions") converted both cpumask printing and parsing functions to use nr_cpu_ids instead of nr_cpumask_bits. While this was okay for the printing functions as it just picked one of the two output formats that we were alternating between depending on a kernel config, doing the same for parsing wasn't okay. nr_cpumask_bits can be either nr_cpu_ids or NR_CPUS. We can always use nr_cpu_ids but that is a variable while NR_CPUS is a constant, so it can be more efficient to use NR_CPUS when we can get away with it. Converting the printing functions to nr_cpu_ids makes sense because it affects how the masks get presented to userspace and doesn't break anything; however, using nr_cpu_ids for parsing functions can incorrectly leave the higher bits uninitialized while reading in these masks from userland. As all testing and comparison functions use nr_cpumask_bits which can be larger than nr_cpu_ids, the parsed cpumasks can erroneously yield false negative results. This made the taskstats interface incorrectly return -EINVAL even when the inputs were correct. Fix it by restoring the parse functions to use nr_cpumask_bits instead of nr_cpu_ids. Link: http://lkml.kernel.org/r/20170206182442.GB31078@htj.duckdns.org Fixes: 513e3d2d ("cpumask: always use nr_cpu_ids in formatting and parsing functions") Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Martin Steigerwald <martin.steigerwald@teamix.de> Debugged-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: <stable@vger.kernel.org> [4.0+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jan Kara authored
Some ->page_mkwrite handlers may return VM_FAULT_RETRY as its return code (GFS2 or Lustre can definitely do this). However VM_FAULT_RETRY from ->page_mkwrite is completely unhandled by the mm code and results in locking and writeably mapping the page which definitely is not what the caller wanted. Fix Lustre and block_page_mkwrite_ret() used by other filesystems (notably GFS2) to return VM_FAULT_NOPAGE instead which results in bailing out from the fault code, the CPU then retries the access, and we fault again effectively doing what the handler wanted. Link: http://lkml.kernel.org/r/20170203150729.15863-1-jack@suse.cz Signed-off-by:
Jan Kara <jack@suse.cz> Reported-by:
Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by:
Jinshan Xiong <jinshan.xiong@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Luis R. Rodriguez authored
The user_header gets caught by kmemleak with the following splat as missing a free: unreferenced object 0xffff99667a733d80 (size 96): comm "swapper/0", pid 1, jiffies 4294892317 (age 62191.468s) hex dump (first 32 bytes): a0 b6 92 b4 ff ff ff ff 00 00 00 00 01 00 00 00 ................ 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: kmemleak_alloc+0x4a/0xa0 __kmalloc+0x144/0x260 __register_sysctl_table+0x54/0x5e0 register_sysctl+0x1b/0x20 user_namespace_sysctl_init+0x17/0x34 do_one_initcall+0x52/0x1a0 kernel_init_freeable+0x173/0x200 kernel_init+0xe/0x100 ret_from_fork+0x2c/0x40 The BUG_ON()s are intended to crash so no need to clean up after ourselves on error there. This is also a kernel/ subsys_init() we don't need a respective exit call here as this is never modular, so just white list it. Link: http://lkml.kernel.org/r/20170203211404.31458-1-mcgrof@kernel.org Signed-off-by:
Luis R. Rodriguez <mcgrof@kernel.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Nikolay Borisov <n.borisov.lkml@gmail.com> Cc: Serge Hallyn <serge@hallyn.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrzej Pietrasiewicz authored
When drm_crtc_init_with_planes() was orignally added (in drm_crtc.c, e13161af drm: Add drm_crtc_init_with_planes() (v2)), it only checked for "primary" being non-null. If that was the case, it modified primary->possible_crtcs. Then, when support for cursor planes was added (fc1d3e44 drm: Allow drivers to register cursor planes with crtc), the same behaviour was implemented for cursor planes. vc4_plane_init() since its inception has passed 0xff as "possible_crtcs" parameter to drm_universal_plane_init(). With a change in drm_crtc.c (7abc7d47 drm: don't override possible_crtcs for primary/cursor planes) passing 0xff results in primary's possible_crtcs set to 0xff (cursor was updated manually by vc4_crtc.c). Consequently, it would be allowed to use the primary plane from CRTC 1 (for example) on CRTC 0, which would result in the overlay and cursors being buried. Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@samsung.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Link: http://patchwork.freedesktop.org/patch/msgid/1485941708-27892-1-git-send-email-andrzej.p@samsung.com Fixes: 7abc7d47 ("drm: don't override possible_crtcs for primary/cursor planes")
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: - check MSI affinity vs. number of vectors to avoid memory corruption - drop runtime power management for PCIe hotplug ports for now to avoid regressing hotplug via sysfs * tag 'pci-v4.10-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: pciehp: Add runtime PM support for PCIe hotplug ports" PCI/MSI: Don't apply affinity if there aren't enough vectors left
-
Bryant G. Ly authored
This patch adds internal LIO sgl limit since the driver already sets a max transfer limit on transport layer of 1MB to the client. Cc: stable@vger.kernel.org Tested-by:
Steven Royer <seroyer@linux.vnet.ibm.com> Signed-off-by:
Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: - A relatively large patch restores booting on i.MX platforms that failed to boot after a cleanup was merged for v4.10. - A quirk for USB needs to be enabled on the STi platform - On the Meson platform, we saw memory corruption with part of the memory used by the secure monitor, so we have to stay out of that area. - The same platform also has a problem with ethernet under load, which is fixed by disabling EEE negotiation. - imx6dl has an incorrect pin configuration, which prevents SPI from working. - Two maintainers have lost their access to their email addresses, so we should update the MAINTAINERS file before the release - Renaming one of the orion5x linkstation models to help simplify the debian install. - A couple of fixes for build warnings that were introduced during v4.10-rc. * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: defconfigs: make NF_CT_PROTO_SCTP and NF_CT_PROTO_UDPLITE built-in MAINTAINERS: socfpga: update email for Dinh Nguyen ARM: orion5x: fix Makefile for linkstation-lschl.dtb ARM: dts: orion5x-lschl: More consistent naming on linkstation series ARM: dts: orion5x-lschl: Fix model name MAINTAINERS: change email address from atmel to microchip MAINTAINERS: at91: change email address ARM64: dts: meson-gx: Add firmware reserved memory zones ARM64: dts: meson-gxbb-odroidc2: fix GbE tx link breakage ARM: dts: STiH407-family: set snps,dis_u3_susphy_quirk ARM: dts: imx: Pass 'chosen' and 'memory' nodes ARM: dts: imx6dl: fix GPIO4 range ARM: imx: hide unused variable in #ifdef
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull selinux fix from James Morris: "Fix off-by-one in setprocattr" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: selinux: fix off-by-one in setprocattr
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fix from Jens Axboe: "A single fix that should go into 4.10, fixing a regression on some devices with the WRITE_SAME command" * 'for-linus' of git://git.kernel.dk/linux-block: block: don't try Write Same from __blkdev_issue_zeroout
-
Nicholas Bellinger authored
This patch addresses a long standing bug where the commit phase of COMPARE_AND_WRITE would result in a se_cmd->cmd_kref reference leak if se_cmd->scsi_status returned non SAM_STAT_GOOD. This would manifest first as a lost SCSI response, and eventual hung task during fabric driver logout or re-login, as existing shutdown logic waited for the COMPARE_AND_WRITE se_cmd->cmd_kref to reach zero. To address this bug, compare_and_write_post() has been changed to drop the incorrect !cmd->scsi_status conditional that was preventing *post_ret = 1 for being set during non SAM_STAT_GOOD status. This patch has been tested with SAM_STAT_CHECK_CONDITION status from normal target_complete_cmd() callback path, as well as the incoming __target_execute_cmd() submission failure path when se_cmd->execute_cmd() returns non zero status. Reported-by:
Donald White <dew@datera.io> Cc: Donald White <dew@datera.io> Tested-by:
Gary Guo <ghg@datera.io> Cc: Gary Guo <ghg@datera.io> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> # v3.12+ Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch addresses a long-standing bug with multi-session (eg: iscsi-target + iser-target) se_node_acl dynamic free withini transport_deregister_session(). This bug is caused when a storage endpoint is configured with demo-mode (generate_node_acls = 1 + cache_dynamic_acls = 1) initiators, and initiator login creates a new dynamic node acl and attaches two sessions to it. After that, demo-mode for the storage instance is disabled via configfs (generate_node_acls = 0 + cache_dynamic_acls = 0) and the existing dynamic acl is never converted to an explicit ACL. The end result is dynamic acl resources are released twice when the sessions are shutdown in transport_deregister_session(). If the storage instance is not changed to disable demo-mode, or the dynamic acl is converted to an explict ACL, or there is only a single session associated with the dynamic ACL, the bug is not triggered. To address this big, move the release of dynamic se_node_acl memory into target_complete_nacl() so it's only freed once when se_node_acl->acl_kref reaches zero. (Drop unnecessary list_del_init usage - HCH) Reported-by:
Rob Millner <rlm@daterainc.com> Tested-by:
Rob Millner <rlm@daterainc.com> Cc: Rob Millner <rlm@daterainc.com> Cc: stable@vger.kernel.org # 4.1+ Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
- Feb 08, 2017
-
-
Nicholas Bellinger authored
This patch fixes a bug where incoming task management requests can be explicitly aborted during an active LUN_RESET, but who's struct work_struct are canceled in-flight before execution. This occurs when core_tmr_drain_tmr_list() invokes cancel_work_sync() for the incoming se_tmr_req->task_cmd->work, resulting in cmd->work for target_tmr_work() never getting invoked and the aborted TMR waiting indefinately within transport_wait_for_tasks(). To address this case, perform a CMD_T_ABORTED check early in transport_generic_handle_tmr(), and invoke the normal path via transport_cmd_check_stop_to_fabric() to complete any TMR kthreads blocked waiting for CMD_T_STOP in transport_wait_for_tasks(). Also, move the TRANSPORT_ISTATE_PROCESSING assignment earlier into transport_generic_handle_tmr() so the existing check in core_tmr_drain_tmr_list() avoids attempting abort the incoming se_tmr_req->task_cmd->work if it has already been queued into se_device->tmr_wq. Reported-by:
Rob Millner <rlm@daterainc.com> Tested-by:
Rob Millner <rlm@daterainc.com> Cc: Rob Millner <rlm@daterainc.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org # 3.14+ Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch adds the missing target_complete_cmd() SCSI status parameter change in target_xcopy_do_work(), that was originally missing in commit 926317de . It correctly propigates up the correct SCSI status during EXTENDED_COPY exception cases, instead of always using the hardcoded SAM_STAT_CHECK_CONDITION from original code. This is required for ESX host environments that expect to hit SAM_STAT_RESERVATION_CONFLICT for certain scenarios, and SAM_STAT_CHECK_CONDITION results in non-retriable status for these cases. Reported-by:
Nixon Vincent <nixon.vincent@calsoftinc.com> Tested-by:
Nixon Vincent <nixon.vincent@calsoftinc.com> Cc: Nixon Vincent <nixon.vincent@calsoftinc.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org # 3.14+ Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
After the v4.2+ RCU conversion to se_node_acl->lun_entry_hlist, a BUG_ON() was added in core_enable_device_list_for_node() to detect when the located orig->se_lun_acl contains an existing se_lun_acl pointer reference. However, this scenario can happen when a dynamically generated NodeACL is being converted to an explicit NodeACL, when the explicit NodeACL contains a different LUN mapping than the default provided by the WWN endpoint. So instead of triggering BUG_ON(), go ahead and fail instead following the original pre RCU conversion logic. Reported-by:
Benjamin ESTRABAUD <ben.estrabaud@mpstor.com> Cc: Benjamin ESTRABAUD <ben.estrabaud@mpstor.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org # 4.2+ Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Benjamin Herrenschmidt authored
When autonuma (Automatic NUMA balancing) marks a PTE inaccessible it clears all the protection bits but leave the PTE valid. With the Radix MMU, an attempt at executing from such a PTE will take a fault with bit 35 of SRR1 set "SRR1_ISI_N_OR_G". It is thus incorrect to treat all such faults as errors. We should pass them to handle_mm_fault() for autonuma to deal with. The case of pages that are really not executable is handled by the existing test for VM_EXEC further down. That leaves us with catching the kernel attempts at executing user pages. We can catch that earlier, even before we do find_vma. It is never valid on powerpc for the kernel to take an exec fault to begin with. So fold that test with the existing test for the kernel faulting on kernel addresses to bail out early. Fixes: 1d18ad02 ("powerpc/mm: Detect instruction fetch denied and report") Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Takashi Iwai authored
When a sequencer queue is created in snd_seq_queue_alloc(),it adds the new queue element to the public list before referencing it. Thus the queue might be deleted before the call of snd_seq_queue_use(), and it results in the use-after-free error, as spotted by syzkaller. The fix is to reference the queue object at the right time. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Michał Winiarski authored
We're using non-canonical addresses in drm_mm, and we're making sure that userspace is using canonical addressing - both in case of softpin (verifying incoming offset) and when relocating (converting to canonical when updating offset returned to userspace). Unfortunately when considering the need for relocations, we're comparing offset from userspace (in canonical form) with drm_mm node (in non-canonical form), and as a result, we end up always relocating if our offsets are in the "problematic" range. Let's always convert the offsets to avoid the performance impact of relocations. Fixes: a5f0edf6 ("drm/i915: Avoid writing relocs with addresses in non-canonical form") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Reported-by:
Michał Pyrzowski <michal.pyrzowski@intel.com> Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170207195559.18798-1-michal.winiarski@intel.com Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 038c95a3 ) Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Chris Wilson authored
The goal of the WARN was to catch when we are still actively using the fence as we go into the runtime suspend. However, the reg->pin_count is too coarse as it does not distinguish between exclusive ownership of the fence register from activity. I've not improved on the WARN, nor have we captured this WARN in an exact igt, but it is showing up regularly in the wild: [ 1915.935332] WARNING: CPU: 1 PID: 10861 at drivers/gpu/drm/i915/i915_gem.c:2022 i915_gem_runtime_suspend+0x116/0x130 [i915] [ 1915.935383] WARN_ON(reg->pin_count)[ 1915.935399] Modules linked in: snd_hda_intel i915 drm_kms_helper vgem netconsole scsi_transport_iscsi fuse vfat fat x86_pkg_temp_thermal coretemp intel_cstate intel_uncore snd_hda_codec_hdmi snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mei_me mei serio_raw intel_rapl_perf intel_pch_thermal soundcore wmi acpi_pad i2c_algo_bit syscopyarea sysfillrect sysimgblt fb_sys_fops drm r8169 mii video [last unloaded: drm_kms_helper] [ 1915.935785] CPU: 1 PID: 10861 Comm: kworker/1:0 Tainted: G U W 4.9.0-rc5+ #170 [ 1915.935799] Hardware name: LENOVO 80MX/Lenovo E31-80, BIOS DCCN34WW(V2.03) 12/01/2015 [ 1915.935822] Workqueue: pm pm_runtime_work [ 1915.935845] ffffc900044fbbf0 ffffffffac3220bc ffffc900044fbc40 0000000000000000 [ 1915.935890] ffffc900044fbc30 ffffffffac059bcb 000007e6044fbc60 ffff8801626e3198 [ 1915.935937] ffff8801626e0000 0000000000000002 ffffffffc05e5d4e 0000000000000000 [ 1915.935985] Call Trace: [ 1915.936013] [<ffffffffac3220bc>] dump_stack+0x4f/0x73 [ 1915.936038] [<ffffffffac059bcb>] __warn+0xcb/0xf0 [ 1915.936060] [<ffffffffac059c4f>] warn_slowpath_fmt+0x5f/0x80 [ 1915.936158] [<ffffffffc052d916>] i915_gem_runtime_suspend+0x116/0x130 [i915] [ 1915.936251] [<ffffffffc04f1c74>] intel_runtime_suspend+0x64/0x280 [i915] [ 1915.936277] [<ffffffffac0926f1>] ? dequeue_entity+0x241/0xbc0 [ 1915.936298] [<ffffffffac36bb85>] pci_pm_runtime_suspend+0x55/0x180 [ 1915.936317] [<ffffffffac36bb30>] ? pci_pm_runtime_resume+0xa0/0xa0 [ 1915.936339] [<ffffffffac4514e2>] __rpm_callback+0x32/0x70 [ 1915.936356] [<ffffffffac451544>] rpm_callback+0x24/0x80 [ 1915.936375] [<ffffffffac36bb30>] ? pci_pm_runtime_resume+0xa0/0xa0 [ 1915.936392] [<ffffffffac45222d>] rpm_suspend+0x12d/0x680 [ 1915.936415] [<ffffffffac69f6d7>] ? _raw_spin_unlock_irq+0x17/0x30 [ 1915.936435] [<ffffffffac0810b8>] ? finish_task_switch+0x88/0x220 [ 1915.936455] [<ffffffffac4534bf>] pm_runtime_work+0x6f/0xb0 [ 1915.936477] [<ffffffffac074353>] process_one_work+0x1f3/0x4d0 [ 1915.936501] [<ffffffffac074678>] worker_thread+0x48/0x4e0 [ 1915.936523] [<ffffffffac074630>] ? process_one_work+0x4d0/0x4d0 [ 1915.936542] [<ffffffffac074630>] ? process_one_work+0x4d0/0x4d0 [ 1915.936559] [<ffffffffac07a2c9>] kthread+0xd9/0xf0 [ 1915.936580] [<ffffffffac07a1f0>] ? kthread_park+0x60/0x60 [ 1915.936600] [<ffffffffac69fe62>] ret_from_fork+0x22/0x30 In the case the register is pinned, it should be present and we will need to invalidate them to be restored upon resume as we cannot expect the owner of the pin to call get_fence prior to use after resume. Fixes: 7c108fd8 ("drm/i915: Move fence cancellation to runtime suspend") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98804 Reported-by:
Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Imre Deak <imre.deak@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+ Link: http://patchwork.freedesktop.org/patch/msgid/20170203125717.8431-1-chris@chris-wilson.co.uk Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit e0ec3ec6 ) Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Lee, Shawn C authored
Add the missing INTEL_OUTPUT_DP_MST case in bxt_get_dpll() to correctly initialize the crtc_state and port plls when link training a DP MST monitor on BXT/APL devices. Fixes: a277ca7d ("drm/i915: Split bxt_ddi_pll_select()") Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=99572 Reviewed-by:
Cooper Chiou <cooper.chiou@intel.com> Reviewed-by:
Gary C Wang <gary.c.wang@intel.com> Reviewed-by:
Ciobanu, Nathan D <nathan.d.ciobanu@intel.com> Reviewed-by:
Herbert, Marc <marc.herbert@intel.com> Reviewed-by:
Bride, Jim <jim.bride@intel.com> Reviewed-by:
Navare, Manasi D <manasi.d.navare@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by:
Lee, Shawn C <shawn.c.lee@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1486096329-6255-1-git-send-email-shawn.c.lee@intel.com (cherry picked from commit 0aab2c72 ) Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-