Pull ACPI and power management updates from Rafael Wysocki:
 "This is material that didn't make it to my 3.18-rc1 pull request for
  various reasons, mostly related to timing and travel (LinuxCon EU /
  LPC) plus a couple of fixes for recent bugs.

  The only really new thing here is the PM QoS class for memory
  bandwidth, but it is simple enough and users of it will be added in
  the next cycle.  One major change in behavior is that platform devices
  enumerated by ACPI will use 32-bit DMA mask by default.  Also included
  is an ACPICA update to a new upstream release, but that's mostly
  cleanups, changes in tools and similar.  The rest is fixes and
  cleanups mostly.

  Specifics:

   - Fix for a recent PCI power management change that overlooked the
     fact that some IRQ chips might not be able to configure PCIe PME
     for system wakeup from Lucas Stach.

   - Fix for a bug introduced in 3.17 where acpi_device_wakeup() is
     called with a wrong ordering of arguments from Zhang Rui.

   - A bunch of intel_pstate driver fixes (all -stable candidates) from
     Dirk Brandewie, Gabriele Mazzotta and Pali Rohár.

   - Fixes for a rather long-standing problem with the OOM killer and
     the freezer that frozen processes killed by the OOM do not actually
     release any memory until they are thawed, so OOM-killing them is
     rather pointless, with a couple of cleanups on top (Michal Hocko,
     Cong Wang, Rafael J Wysocki).

   - ACPICA update to upstream release 20140926, inlcuding mostly
     cleanups reducing differences between the upstream ACPICA and the
     kernel code, tools changes (acpidump, acpiexec) and support for the
     _DDN object (Bob Moore, Lv Zheng).

   - New PM QoS class for memory bandwidth from Tomeu Vizoso.

   - Default 32-bit DMA mask for platform devices enumerated by ACPI
     (this change is mostly needed for some drivers development in
     progress targeted at 3.19) from Heikki Krogerus.

   - ACPI EC driver cleanups, mostly related to debugging, from Lv
     Zheng.

   - cpufreq-dt driver updates from Thomas Petazzoni.

   - powernv cpuidle driver update from Preeti U Murthy"

* tag 'pm+acpi-3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits)
  intel_pstate: Correct BYT VID values.
  intel_pstate: Fix BYT frequency reporting
  intel_pstate: Don't lose sysfs settings during cpu offline
  cpufreq: intel_pstate: Reflect current no_turbo state correctly
  cpufreq: expose scaling_cur_freq sysfs file for set_policy() drivers
  cpufreq: intel_pstate: Fix setting max_perf_pct in performance policy
  PCI / PM: handle failure to enable wakeup on PCIe PME
  ACPI: invoke acpi_device_wakeup() with correct parameters
  PM / freezer: Clean up code after recent fixes
  PM: convert do_each_thread to for_each_process_thread
  OOM, PM: OOM killed task shouldn't escape PM suspend
  freezer: remove obsolete comments in __thaw_task()
  freezer: Do not freeze tasks killed by OOM killer
  ACPI / platform: provide default DMA mask
  cpuidle: powernv: Populate cpuidle state details by querying the device-tree
  cpufreq: cpufreq-dt: adjust message related to regulators
  cpufreq: cpufreq-dt: extend with platform_data
  cpufreq: allow driver-specific data
  ACPI / EC: Cleanup coding style.
  ACPI / EC: Refine event/query debugging messages.
  ...

Pull thermal management updates from Zhang Rui:
 "Sorry that I missed the merge window as there is a bug found in the
  last minute, and I have to fix it and wait for the code to be tested
  in linux-next tree for a few days.  Now the buggy patch has been
  dropped entirely from my next branch.  Thus I hope those changes can
  still be merged in 3.18-rc2 as most of them are platform thermal
  driver changes.

  Specifics:

   - introduce ACPI INT340X thermal drivers.

     Newer laptops and tablets may have thermal sensors and other
     devices with thermal control capabilities that are exposed for the
     OS to use via the ACPI INT340x device objects.  Several drivers are
     introduced to expose the temperature information and cooling
     ability from these objects to user-space via the normal thermal
     framework.

     From: Lu Aaron, Lan Tianyu, Jacob Pan and Zhang Rui.

   - introduce a new thermal governor, which just uses a hysteresis to
     switch abruptly on/off a cooling device.  This governor can be used
     to control certain fan devices that can not be throttled but just
     switched on or off.  From: Peter Feuerer.

   - introduce support for some new thermal interrupt functions on
     i.MX6SX, in IMX thermal driver.  From: Anson, Huang.

   - introduce tracing support on thermal framework.  From: Punit
     Agrawal.

   - small fixes in OF thermal and thermal step_wise governor"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits)
  Thermal: int340x thermal: select ACPI fan driver
  Thermal: int3400_thermal: use acpi_thermal_rel parsing APIs
  Thermal: int340x_thermal: expose acpi thermal relationship tables
  Thermal: introduce int3403 thermal driver
  Thermal: introduce INT3402 thermal driver
  Thermal: move the KELVIN_TO_MILLICELSIUS macro to thermal.h
  ACPI / Fan: support INT3404 thermal device
  ACPI / Fan: add ACPI 4.0 style fan support
  ACPI / fan: convert to platform driver
  ACPI / fan: use acpi_device_xxx_power instead of acpi_bus equivelant
  ACPI / fan: remove no need check for device pointer
  ACPI / fan: remove unused macro
  Thermal: int3400 thermal: register to thermal framework
  Thermal: int3400 thermal: add capability to detect supporting UUIDs
  Thermal: introduce int3400 thermal driver
  ACPI: add ACPI_TYPE_LOCAL_REFERENCE support to acpi_extract_package()
  ACPI: make acpi_create_platform_device() an external API
  thermal: step_wise: fix: Prevent from binary overflow when trend is dropping
  ACPI: introduce ACPI int340x thermal scan handler
  thermal: Added Bang-bang thermal governor
  ...

Pull weak function declaration removal from Bjorn Helgaas:
 "The "weak" attribute is commonly used for the default version of a
  function, where an architecture can override it by providing a strong
  version.

  Some header file declarations included the "weak" attribute.  That's
  error-prone because it causes every implementation to be weak, with no
  strong version at all, and the linker chooses one based on link order.

  What we want is the "weak" attribute only on the *definition* of the
  default implementation.  These changes remove "weak" from the
  declarations, leaving it on the default definitions"

* tag 'remove-weak-declarations' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  uprobes: Remove "weak" from function declarations
  memory-hotplug: Remove "weak" from memory_block_size_bytes() declaration
  kgdb: Remove "weak" from kgdb_arch_pc() declaration
  ARC: kgdb: generic kgdb_arch_pc() suffices
  vmcore: Remove "weak" from function declarations
  clocksource: Remove "weak" from clocksource_default_clock() declaration
  x86, intel-mid: Remove "weak" from function declarations
  audit: Remove "weak" from audit_classify_compat_syscall() declaration

Pull x86 EFI updates from Peter Anvin:
 "This patchset falls under the "maintainers that grovel" clause in the
  v3.18-rc1 announcement.  We had intended to push it late in the merge
  window since we got it into the -tip tree relatively late.

  Many of these are relatively simple things, but there are a couple of
  key bits, especially Ard's and Matt's patches"

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  rtc: Disable EFI rtc for x86
  efi: rtc-efi: Export platform:rtc-efi as module alias
  efi: Delete the in_nmi() conditional runtime locking
  efi: Provide a non-blocking SetVariable() operation
  x86/efi: Adding efi_printks on memory allocationa and pci.reads
  x86/efi: Mark initialization code as such
  x86/efi: Update comment regarding required phys mapped EFI services
  x86/efi: Unexport add_efi_memmap variable
  x86/efi: Remove unused efi_call* macros
  efi: Resolve some shadow warnings
  arm64: efi: Format EFI memory type & attrs with efi_md_typeattr_format()
  ia64: efi: Format EFI memory type & attrs with efi_md_typeattr_format()
  x86: efi: Format EFI memory type & attrs with efi_md_typeattr_format()
  efi: Introduce efi_md_typeattr_format()
  efi: Add macro for EFI_MEMORY_UCE memory attribute
  x86/efi: Clear EFI_RUNTIME_SERVICES if failing to enter virtual mode
  arm64/efi: Do not enter virtual mode if booting with efi=noruntime or noefi
  arm64/efi: uefi_init error handling fix
  efi: Add kernel param efi=noruntime
  lib: Add a generic cmdline parse function parse_option_str
  ...

* pm-cpuidle:
  cpuidle: powernv: Populate cpuidle state details by querying the device-tree

* pm-cpufreq:
  intel_pstate: Correct BYT VID values.
  intel_pstate: Fix BYT frequency reporting
  intel_pstate: Don't lose sysfs settings during cpu offline
  cpufreq: intel_pstate: Reflect current no_turbo state correctly
  cpufreq: expose scaling_cur_freq sysfs file for set_policy() drivers
  cpufreq: intel_pstate: Fix setting max_perf_pct in performance policy
  cpufreq: cpufreq-dt: adjust message related to regulators
  cpufreq: cpufreq-dt: extend with platform_data
  cpufreq: allow driver-specific data

* acpi-pm:
  ACPI: invoke acpi_device_wakeup() with correct parameters

* pm-genirq:
  PCI / PM: handle failure to enable wakeup on PCIe PME

* freezer:
  PM / freezer: Clean up code after recent fixes
  PM: convert do_each_thread to for_each_process_thread
  OOM, PM: OOM killed task shouldn't escape PM suspend
  freezer: remove obsolete comments in __thaw_task()
  freezer: Do not freeze tasks killed by OOM killer

* pm-qos:
  PM / QoS: Add PM_QOS_MEMORY_BANDWIDTH class

* acpi-ec:
  ACPI / EC: Cleanup coding style.
  ACPI / EC: Refine event/query debugging messages.
  ACPI / EC: Add detailed command/query debugging information.
  ACPI / EC: Enhance the logs to apply to QR_EC transactions.
  ACPI / EC: Add CPU ID to debugging messages.

* acpi-platform:
  ACPI / platform: provide default DMA mask

Using a VID value that is not high enough for the requested P state can
cause machine checks. Add a ceiling function to ensure calulated VIDs
with fractional values are set to the next highest integer VID value.

The algorythm for calculating the non-trubo VID from the BIOS writers
guide is:
 vid_ratio = (vid_max - vid_min) / (max_pstate - min_pstate)
 vid = ceiling(vid_min + (req_pstate - min_pstate) * vid_ratio)

Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

BYT has a different conversion from P state to frequency than the core
processors.  This causes the min/max and current frequency to be
misreported on some BYT SKUs. Tested on BYT N2820, Ivybridge and
Haswell processors.

Link: https://bugzilla.yoctoproject.org/show_bug.cgi?id=6663


Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The user may have custom settings don't destroy them during suspend.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=80651


Reported-by: Tobias Jakobi <liquid.acid@gmx.net>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Some BIOSes modify the state of MSR_IA32_MISC_ENABLE_TURBO_DISABLE
based on the current power source for the system battery AC vs
battery. Reflect the correct current state and ability to modify the
no_turbo sysfs file based on current state of
MSR_IA32_MISC_ENABLE_TURBO_DISABLE.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=83151


Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently the core does not expose scaling_cur_freq for set_policy()
drivers this breaks some userspace monitoring tools.
Change the core to expose this file for all drivers and if the
set_policy() driver supports the get() callback use it to retrieve the
current frequency.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=73741


Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Code which changes policy to powersave changes also max_policy_pct based on
max_freq. Code which change max_perf_pct has upper limit base on value
max_policy_pct. When policy is changing from powersave back to performance
then max_policy_pct is not changed. Which means that changing max_perf_pct is
not possible to high values if max_freq was too low in powersave policy.

Test case:

$ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
800000
$ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
3300000
$ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
performance
$ cat /sys/devices/system/cpu/intel_pstate/max_perf_pct
100

$ echo powersave > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
$ echo 800000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
$ echo 20 > /sys/devices/system/cpu/intel_pstate/max_perf_pct

$ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
powersave
$ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
800000
$ cat /sys/devices/system/cpu/intel_pstate/max_perf_pct
20

$ echo performance > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
$ echo 3300000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
$ echo 100 > /sys/devices/system/cpu/intel_pstate/max_perf_pct

$ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
performance
$ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
3300000
$ cat /sys/devices/system/cpu/intel_pstate/max_perf_pct
24

And now intel_pstate driver allows to set maximal value for max_perf_pct based
on max_policy_pct which is 24 for previous powersave max_freq 800000.

This patch will set default value for max_policy_pct when setting policy to
performance so it will allow to set also max value for max_perf_pct.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Cc: All applicable <stable@vger.kernel.org>
Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge tag 'hwmon-for-linus-v3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull a hwmon fix from Guenter Roeck:
 "Fix potential compile problem for menf21bmc hwmon driver"

* tag 'hwmon-for-linus-v3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (menf21bmc) Include linux/err.h

If the irqchip handling the PCIe PME interrupt is not able
to enable interrupt wakeup we should properly reflect this
in the PME suspend status.

This fixes a kernel warning on resume, where it would try
to disable the irq wakeup that failed to be activated while
suspending, for example:

WARNING: CPU: 0 PID: 609 at kernel/irq/manage.c:536 irq_set_irq_wake+0xc0/0xf8()
Unbalanced IRQ 384 wake disable

Fixes: 76cde7e4

 (PCI / PM: Make PCIe PME interrupts wake up from suspend-to-idle)
Reported-and-tested-by: Richard Zhu <richard.zhu@freescale.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Fix a bug that invokes acpi_device_wakeup() with wrong parameters.

Fixes: f35cec25

 (ACPI / PM: Always enable wakeup GPEs when enabling device wakeup)
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Cc: 3.17+ <stable@vger.kernel.org> # 3.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull drm fixes from Dave Airlie:
 "Intel, nouveau, radeon and qxl.

  Mostly for bugs introduced in the merge window, nothing too shocking"

[ And one cirrus fix added later and not mentioned in the pull request..  - Linus ]

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/cirrus: bind also to qemu-xen-traditional
  qxl: don't create too large primary surface
  drm/nouveau: fix regression on agp boards
  drm/gt215/gr: fix initialisation on gddr5 boards
  drm/radeon: reduce sparse false positive warnings
  drm/radeon: fix vm page table block size calculation
  drm/ttm: Don't evict BOs outside of the requested placement range
  drm/ttm: Don't skip fpfn check if lpfn is 0 in ttm_bo_mem_compat
  drm/radeon: use gart memory for DMA ring tests
  drm/radeon: fix speaker allocation setup
  drm/radeon: initialize sadb to NULL in the audio code
  drm/i915: fix short vs. long hpd detection
  drm/i915: Don't trust the DP_DETECT bit for eDP ports on CHV
  Revert "drm/radeon/dpm: drop clk/voltage dependency filters for SI"
  Revert "drm/radeon: drop btc_get_max_clock_from_voltage_dependency_table"
  drm/i915: properly reenable gen8 pipe IRQs
  drm/i915: Move DIV_ROUND_CLOSEST_ULL macro to header
  drm/i915: intel_backlight scale() math WA

qemu as used by xend/xm toolstack uses a different subvendor id.
Bind the drm driver also to this emulated card.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

For the following interfaces:

  set_swbp()
  set_orig_insn()
  is_swbp_insn()
  is_trap_insn()
  uprobe_get_swbp_addr()
  arch_uprobe_ignore()
  arch_uprobe_copy_ixol()

kernel/events/uprobes.c provides default definitions explicitly marked
"weak".  Some architectures provide their own definitions intended to
override the defaults, but the "weak" attribute on the declarations applied
to the arch definitions as well, so the linker chose one based on link
order (see 10629d71

 ("PCI: Remove __weak annotation from
pcibios_get_phb_of_node decl")).

Remove the "weak" attribute from the declarations so we always prefer a
non-weak definition over the weak one, independent of link order.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
CC: Victor Kamensky <victor.kamensky@linaro.org>
CC: Oleg Nesterov <oleg@redhat.com>
CC: David A. Long <dave.long@linaro.org>
CC: Ananth N Mavinakayanahalli <ananth@in.ibm.com>

drivers/base/memory.c provides a default memory_block_size_bytes()
definition explicitly marked "weak".  Several architectures provide their
own definitions intended to override the default, but the "weak" attribute
on the declaration applied to the arch definitions as well, so the linker
chose one based on link order (see 10629d71 ("PCI: Remove __weak
annotation from pcibios_get_phb_of_node decl")).

Remove the "weak" attribute from the declaration so we always prefer a
non-weak definition over the weak one, independent of link order.

Fixes: 41f10726

 ("drivers: base: Add prototype declaration to the header file")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
CC: Rashika Kheria <rashika.kheria@gmail.com>
CC: Nathan Fontenot <nfont@austin.ibm.com>
CC: Anton Blanchard <anton@au1.ibm.com>
CC: Heiko Carstens <heiko.carstens@de.ibm.com>
CC: Yinghai Lu <yinghai@kernel.org>

kernel/debug/debug_core.c provides a default kgdb_arch_pc() definition
explicitly marked "weak".  Several architectures provide their own
definitions intended to override the default, but the "weak" attribute on
the declaration applied to the arch definitions as well, so the linker
chose one based on link order (see 10629d71 ("PCI: Remove __weak
annotation from pcibios_get_phb_of_node decl")).

Remove the "weak" attribute from the declaration so we always prefer a
non-weak definition over the weak one, independent of link order.

Fixes: 688b744d

 ("kgdb: fix signedness mixmatches, add statics, add declaration to header")
Tested-by: Vineet Gupta <vgupta@synopsys.com>	# for ARC build
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Harvey Harrison <harvey.harrison@gmail.com>

The ARC version of kgdb_arch_pc() is identical to the generic version in
kernel/debug/debug_core.c.  Drop the ARC version so we use the generic one.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

For the following functions:

  elfcorehdr_alloc()
  elfcorehdr_free()
  elfcorehdr_read()
  elfcorehdr_read_notes()
  remap_oldmem_pfn_range()

fs/proc/vmcore.c provides default definitions explicitly marked "weak".
arch/s390 provides its own definitions intended to override the default
ones, but the "weak" attribute on the declarations applied to the s390
definitions as well, so the linker chose one based on link order (see
10629d71 ("PCI: Remove __weak annotation from pcibios_get_phb_of_node
decl")).

Remove the "weak" attribute from the declarations so we always prefer a
non-weak definition over the weak one, independent of link order.

Fixes: be8a8d06 ("vmcore: introduce ELF header in new memory feature")
Fixes: 9cb21813

 ("vmcore: introduce remap_oldmem_pfn_range()")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
CC: Michael Holzheu <holzheu@linux.vnet.ibm.com>

kernel/time/jiffies.c provides a default clocksource_default_clock()
definition explicitly marked "weak".  arch/s390 provides its own definition
intended to override the default, but the "weak" attribute on the
declaration applied to the s390 definition as well, so the linker chose one
based on link order (see 10629d71 ("PCI: Remove __weak annotation from
pcibios_get_phb_of_node decl")).

Remove the "weak" attribute from the clocksource_default_clock()
declaration so we always prefer a non-weak definition over the weak one,
independent of link order.

Fixes: f1b82746

 ("clocksource: Cleanup clocksource selection")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
CC: Daniel Lezcano <daniel.lezcano@linaro.org>
CC: Martin Schwidefsky <schwidefsky@de.ibm.com>

For the following interfaces:

  get_penwell_ops()
  get_cloverview_ops()
  get_tangier_ops()

there is only one implementation, so they do not need to be marked "weak".

Remove the "weak" attribute from their declarations.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
CC: David Cohen <david.a.cohen@linux.intel.com>
CC: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
CC: x86@kernel.org

There's only one audit_classify_compat_syscall() definition, so it doesn't
need to be weak.

Remove the "weak" attribute from the audit_classify_compat_syscall()
declaration.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
CC: AKASHI Takahiro <takahiro.akashi@linaro.org>

Clean up the code in process.c after recent changes to get rid of
unnecessary labels and goto statements.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Limit primary to qemu vgamem size, to avoid reaching
qemu guest bug "requested primary larger than framebuffer"
on resizing screen too large to fit.

Remove unneeded and misleading variables.

Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1127552



Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

as per 0c740d0a

 (introduce for_each_thread() to replace the buggy
while_each_thread()) get rid of do_each_thread { } while_each_thread()
construct and replace it by a more error prone for_each_thread.

This patch doesn't introduce any user visible change.

Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

PM freezer relies on having all tasks frozen by the time devices are
getting frozen so that no task will touch them while they are getting
frozen. But OOM killer is allowed to kill an already frozen task in
order to handle OOM situtation. In order to protect from late wake ups
OOM killer is disabled after all tasks are frozen. This, however, still
keeps a window open when a killed task didn't manage to die by the time
freeze_processes finishes.

Reduce the race window by checking all tasks after OOM killer has been
disabled. This is still not race free completely unfortunately because
oom_killer_disable cannot stop an already ongoing OOM killer so a task
might still wake up from the fridge and get killed without
freeze_processes noticing. Full synchronization of OOM and freezer is,
however, too heavy weight for this highly unlikely case.

Introduce and check oom_kills counter which gets incremented early when
the allocator enters __alloc_pages_may_oom path and only check all the
tasks if the counter changes during the freezing attempt. The counter
is updated so early to reduce the race window since allocator checked
oom_killer_disabled which is set by PM-freezing code. A false positive
will push the PM-freezer into a slow path but that is not a big deal.

Changes since v1
- push the re-check loop out of freeze_processes into
  check_frozen_processes and invert the condition to make the code more
  readable as per Rafael

Fixes: f660daac

 (oom: thaw threads if oom killed thread is frozen before deferring)
Cc: 3.2+ <stable@vger.kernel.org> # 3.2+
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

__thaw_task() no longer clears frozen flag since commit a3201227


(freezer: make freezing() test freeze conditions in effect instead of TIF_FREEZE).

Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Since f660daac (oom: thaw threads if oom killed thread is frozen
before deferring) OOM killer relies on being able to thaw a frozen task
to handle OOM situation but a3201227 (freezer: make freezing() test
freeze conditions in effect instead of TIF_FREEZE) has reorganized the
code and stopped clearing freeze flag in __thaw_task. This means that
the target task only wakes up and goes into the fridge again because the
freezing condition hasn't changed for it. This reintroduces the bug
fixed by f660daac.

Fix the issue by checking for TIF_MEMDIE thread flag in
freezing_slow_path and exclude the task from freezing completely. If a
task was already frozen it would get woken by __thaw_task from OOM killer
and get out of freezer after rechecking freezing().

Changes since v1
- put TIF_MEMDIE check into freezing_slowpath rather than in __refrigerator
  as per Oleg
- return __thaw_task into oom_scan_process_thread because
  oom_kill_process will not wake task in the fridge because it is
  sleeping uninterruptible

[mhocko@suse.cz: rewrote the changelog]
Fixes: a3201227

 (freezer: make freezing() test freeze conditions in effect instead of TIF_FREEZE)
Cc: 3.3+ <stable@vger.kernel.org> # 3.3+
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Most devices are configured for 32-bit DMA addresses.
Setting the mask to 32-bit here removes the need for the
drivers to do it separately.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull SCSI target updates from Nicholas Bellinger:
 "Here are the target updates for v3.18-rc2 code.  These where
  originally destined for -rc1, but due to the combination of travel
  last week for KVM Forum and my mistake of taking the three week merge
  window literally, the pull request slipped..  Apologies for that.

  Things where reasonably quiet this round.  The highlights include:

   - New userspace backend driver (target_core_user.ko) by Shaohua Li
     and Andy Grover
   - A number of cleanups in target, iscsi-taret and qla_target code
     from Joern Engel
   - Fix an OOPs related to queue full handling with CHECK_CONDITION
     status from Quinn Tran
   - Fix to disable TX completion interrupt coalescing in iser-target,
     that was causing problems on some hardware
   - Fix for PR APTPL metadata handling with demo-mode ACLs

  I'm most excited about the new backend driver that uses UIO + shared
  memory ring to dispatch I/O and control commands into user-space.
  This was probably the most requested feature by users over the last
  couple of years, and opens up a new area of development + porting of
  existing user-space storage applications to LIO.  Thanks to Shaohua +
  Andy for making this happen.

  Also another honorable mention, a new Xen PV SCSI driver was merged
  via the xen/tip.git tree recently, which puts us now at 10 target
  drivers in upstream! Thanks to David Vrabel + Juergen Gross for their
  work to get this code merged"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (40 commits)
  target/file: fix inclusive vfs_fsync_range() end
  iser-target: Disable TX completion interrupt coalescing
  target: Add force_pr_aptpl device attribute
  target: Fix APTPL metadata handling for dynamic MappedLUNs
  qla_target: don't delete changed nacls
  target/user: Recalculate pad size inside is_ring_space_avail()
  tcm_loop: Fixup tag handling
  iser-target: Fix smatch warning
  target/user: Fix up smatch warnings in tcmu_netlink_event
  target: Add a user-passthrough backstore
  target: Add documentation on the target userspace pass-through driver
  uio: Export definition of struct uio_device
  target: Remove unneeded check in sbc_parse_cdb
  target: Fix queue full status NULL pointer for SCF_TRANSPORT_TASK_SENSE
  qla_target: rearrange struct qla_tgt_prm
  qla_target: improve qlt_unmap_sg()
  qla_target: make some global functions static
  qla_target: remove unused parameter
  target: simplify core_tmr_abort_task
  target: encapsulate smp_mb__after_atomic()
  ...

Pull email address change from Boaz Harrosh.

* 'for-linus' of git://git.open-osd.org/linux-open-osd:
  Boaz Harrosh - fix email in Documentation
  Boaz Harrosh - Fix broken email address
  MAINTAINERS: Change Boaz Harrosh's email

Pull mailbox framework from Jassi Brar:
 "A framework for Mailbox controllers and clients have been cooking for
  more than a year now.

  Everybody in the CC list had been copied on patchset revisions and
  most of them have made sounds of approval, though just one concrete
  Reviewed-by.  The patchset has also been in linux-next for a couple of
  weeks now and no conflict has been reported.  The framework has the
  backing of at least 5 platforms, though I can't say if/when they
  upstream their drivers (some businesses have 'changed')"

(Further acked-by by Arnd Bergmann and Suman Anna in the pull request
thread)

* 'mailbox-for-linus' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  dt: mailbox: add generic bindings
  doc: add documentation for mailbox framework
  mailbox: Introduce framework for mailbox
  mailbox: rename pl320-ipc specific mailbox.h

Pull watchdog updates from Wim Van Sebroeck:
 - new Cadence WDT driver
 - new Ricoh RN5T618 watchdog
 - new DA9063 PMIC watchdog driver
 - new Meson WDT driver
 - add restart handling code
 - fixes and improvements

* git://www.linux-watchdog.org/linux-watchdog: (25 commits)
  watchdog: meson: remove magic value for reboot
  watchdog: Let XILINX_WATCHDOG and TEGRA_WATCHDOG depend on HAS_IOMEM
  watchdog: sunxi: Add A31 watchdog support
  watchdog: sunxi: support parameterized compatible strings
  watchdog: imx2_wdt: add restart handler support
  watchdog: qcom: register a restart notifier
  watchdog: s3c2410: add restart handler
  watchdog: dw_wdt: add restart handler support
  ARM: defconfig: update multi_v7_defconfig
  ARM: meson: add watchdog driver
  ARM: docs: add documentation binding for meson watchdog
  stmp3xxx_rtc_wdt: Add suspend/resume PM support
  watchdog: Add DA9063 PMIC watchdog driver.
  watchdog: add driver for Ricoh RN5T618 watchdog
  watchdog: s3c2410_wdt: Add support for Watchdog device on Exynos7
  watchdog: qcom: document device tree bindings
  watchdog: qcom: add support for KPSS WDT
  watchdog: dw_wdt: initialise TOP_INIT in dw_wdt_set_top()
  devicetree: Add Cadence WDT devicetree bindings documentation
  watchdog: Add Cadence WDT driver
  ...

Pull LED update from Bryan Wu:
 "Basically we have some bug fixing and clean up and one big thing is we
  start to merge patch to add support LED Flash class"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: gpio: cleanup the leds-gpio driver
  led: gpio: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  led: gpio: Sort include headers alphabetically
  leds: Improve and export led_update_brightness
  leds: trigger: gpio: fix warning in gpio trigger for gpios whose accessor function may sleep
  leds: lp3944: fix sparse warning
  leds: avoid using DEVICE_ATTR macro for max_brightness attribute
  leds: make brightness type consistent across whole subsystem
  leds: Reorder include directives