nvme: fix deadlock in disconnect during scan_work and/or ana_work
A deadlock happens in the following scenario with multipath: 1) scan_work(nvme0) detects a new nsid while nvme0 is an optimized path to it, path nvme1 happens to be inaccessible. 2) Before scan_work is complete nvme0 disconnect is initiated nvme_delete_ctrl_sync() sets nvme0 state to NVME_CTRL_DELETING 3) scan_work(1) attempts to submit IO, but nvme_path_is_optimized() observes nvme0 is not LIVE. Since nvme1 is a possible path IO is requeued and scan_work hangs. -- Workqueue: nvme-wq nvme_scan_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: io_schedule+0x16/0x40 kernel: do_read_cache_page+0x438/0x830 kernel: read_cache_page+0x12/0x20 kernel: read_dev_sector+0x27/0xc0 kernel: read_lba+0xc1/0x220 kernel: efi_partition+0x1e6/0x708 kernel: check_partition+0x154/0x244 kernel: rescan_partitions+0xae/0x280 kernel: __blkdev_get+0x40f/0x560 kernel: blkdev_get+0x3d/0x140 kernel: __device_add_disk+0x388/0x480 kernel: device_add_disk+0x13/0x20 kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core] kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core] kernel: nvme_set_ns_ana_state+0x1e/0x30 [nvme_core] kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core] kernel: nvme_mpath_add_disk+0x47/0x90 [nvme_core] kernel: nvme_validate_ns+0x396/0x940 [nvme_core] kernel: nvme_scan_work+0x24f/0x380 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x249/0x400 kernel: kthread+0x104/0x140 -- 4) Delete also hangs in flush_work(ctrl->scan_work) from nvme_remove_namespaces(). Similiarly a deadlock with ana_work may happen: if ana_work has started and calls nvme_mpath_set_live and device_add_disk, it will trigger I/O. When we trigger disconnect I/O will block because our accessible (optimized) path is disconnecting, but the alternate path is inaccessible, so I/O blocks. Then disconnect tries to flush the ana_work and hangs. [ 605.550896] Workqueue: nvme-wq nvme_ana_work [nvme_core] [ 605.552087] Call Trace: [ 605.552683] __schedule+0x2b9/0x6c0 [ 605.553507] schedule+0x42/0xb0 [ 605.554201] io_schedule+0x16/0x40 [ 605.555012] do_read_cache_page+0x438/0x830 [ 605.556925] read_cache_page+0x12/0x20 [ 605.557757] read_dev_sector+0x27/0xc0 [ 605.558587] amiga_partition+0x4d/0x4c5 [ 605.561278] check_partition+0x154/0x244 [ 605.562138] rescan_partitions+0xae/0x280 [ 605.563076] __blkdev_get+0x40f/0x560 [ 605.563830] blkdev_get+0x3d/0x140 [ 605.564500] __device_add_disk+0x388/0x480 [ 605.565316] device_add_disk+0x13/0x20 [ 605.566070] nvme_mpath_set_live+0x5e/0x130 [nvme_core] [ 605.567114] nvme_update_ns_ana_state+0x2c/0x30 [nvme_core] [ 605.568197] nvme_update_ana_state+0xca/0xe0 [nvme_core] [ 605.569360] nvme_parse_ana_log+0xa1/0x180 [nvme_core] [ 605.571385] nvme_read_ana_log+0x76/0x100 [nvme_core] [ 605.572376] nvme_ana_work+0x15/0x20 [nvme_core] [ 605.573330] process_one_work+0x1db/0x380 [ 605.574144] worker_thread+0x4d/0x400 [ 605.574896] kthread+0x104/0x140 [ 605.577205] ret_from_fork+0x35/0x40 [ 605.577955] INFO: task nvme:14044 blocked for more than 120 seconds. [ 605.579239] Tainted: G OE 5.3.5-050305-generic #201910071830 [ 605.580712] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 605.582320] nvme D 0 14044 14043 0x00000000 [ 605.583424] Call Trace: [ 605.583935] __schedule+0x2b9/0x6c0 [ 605.584625] schedule+0x42/0xb0 [ 605.585290] schedule_timeout+0x203/0x2f0 [ 605.588493] wait_for_completion+0xb1/0x120 [ 605.590066] __flush_work+0x123/0x1d0 [ 605.591758] __cancel_work_timer+0x10e/0x190 [ 605.593542] cancel_work_sync+0x10/0x20 [ 605.594347] nvme_mpath_stop+0x2f/0x40 [nvme_core] [ 605.595328] nvme_stop_ctrl+0x12/0x50 [nvme_core] [ 605.596262] nvme_do_delete_ctrl+0x3f/0x90 [nvme_core] [ 605.597333] nvme_sysfs_delete+0x5c/0x70 [nvme_core] [ 605.598320] dev_attr_store+0x17/0x30 Fix this by introducing a new state: NVME_CTRL_DELETE_NOIO, which will indicate the phase of controller deletion where I/O cannot be allowed to access the namespace. NVME_CTRL_DELETING still allows mpath I/O to be issued to the bottom device, and only after we flush the ana_work and scan_work (after nvme_stop_ctrl and nvme_prep_remove_namespaces) we change the state to NVME_CTRL_DELETING_NOIO. Also we prevent ana_work from re-firing by aborting early if we are not LIVE, so we should be safe here. In addition, change the transport drivers to follow the updated state machine. Fixes: 0d0b660f ("nvme: add ANA support") Reported-by: Anton Eidelman <anton@lightbitslabs.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
Please register or sign in to comment