Skip to content
Commit 3a70e0d4 authored by Horatiu Vultur's avatar Horatiu Vultur Committed by Jakub Kicinski
Browse files

net: lan966x: Fix possible deadlock inside PTP



When doing timestamping in lan966x and having PROVE_LOCKING
enabled the following warning is shown.

========================================================
WARNING: possible irq lock inversion dependency detected
6.2.0-rc7-01749-gc54e1f7f7e36 #2786 Tainted: G                 N
--------------------------------------------------------
swapper/0/0 just changed the state of lock:
c2609f50 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x16c/0x2e8
but this lock took another, SOFTIRQ-unsafe lock in the past:
 (&lan966x->ptp_ts_id_lock){+.+.}-{2:2}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&lan966x->ptp_ts_id_lock);
                               local_irq_disable();
                               lock(_xmit_ETHER#2);
                               lock(&lan966x->ptp_ts_id_lock);
  <Interrupt>
    lock(_xmit_ETHER#2);

 *** DEADLOCK ***

5 locks held by swapper/0/0:
 #0: c1001e18 ((&ndev->rs_timer)){+.-.}-{0:0}, at: call_timer_fn+0x0/0x33c
 #1: c105e7c4 (rcu_read_lock){....}-{1:2}, at: ndisc_send_skb+0x134/0x81c
 #2: c105e7d8 (rcu_read_lock_bh){....}-{1:2}, at: ip6_finish_output2+0x17c/0xc64
 #3: c105e7d8 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x4c/0x1224
 #4: c3056174 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x354/0x1224

the shortest dependencies between 2nd lock and 1st lock:
 -> (&lan966x->ptp_ts_id_lock){+.+.}-{2:2} {
    HARDIRQ-ON-W at:
                      lock_acquire.part.0+0xb0/0x248
                      _raw_spin_lock+0x38/0x48
                      lan966x_ptp_irq_handler+0x164/0x2a8
                      irq_thread_fn+0x1c/0x78
                      irq_thread+0x130/0x278
                      kthread+0xec/0x110
                      ret_from_fork+0x14/0x28
    SOFTIRQ-ON-W at:
                      lock_acquire.part.0+0xb0/0x248
                      _raw_spin_lock+0x38/0x48
                      lan966x_ptp_irq_handler+0x164/0x2a8
                      irq_thread_fn+0x1c/0x78
                      irq_thread+0x130/0x278
                      kthread+0xec/0x110
                      ret_from_fork+0x14/0x28
    INITIAL USE at:
                     lock_acquire.part.0+0xb0/0x248
                     _raw_spin_lock_irqsave+0x4c/0x68
                     lan966x_ptp_txtstamp_request+0x128/0x1cc
                     lan966x_port_xmit+0x224/0x43c
                     dev_hard_start_xmit+0xa8/0x2f0
                     sch_direct_xmit+0x108/0x2e8
                     __dev_queue_xmit+0x41c/0x1224
                     packet_sendmsg+0xdb4/0x134c
                     __sys_sendto+0xd0/0x154
                     sys_send+0x18/0x20
                     ret_fast_syscall+0x0/0x1c
  }
  ... key      at: [<c174ba0c>] __key.2+0x0/0x8
  ... acquired at:
   _raw_spin_lock_irqsave+0x4c/0x68
   lan966x_ptp_txtstamp_request+0x128/0x1cc
   lan966x_port_xmit+0x224/0x43c
   dev_hard_start_xmit+0xa8/0x2f0
   sch_direct_xmit+0x108/0x2e8
   __dev_queue_xmit+0x41c/0x1224
   packet_sendmsg+0xdb4/0x134c
   __sys_sendto+0xd0/0x154
   sys_send+0x18/0x20
   ret_fast_syscall+0x0/0x1c

-> (_xmit_ETHER#2){+.-.}-{2:2} {
   HARDIRQ-ON-W at:
                    lock_acquire.part.0+0xb0/0x248
                    _raw_spin_lock+0x38/0x48
                    netif_freeze_queues+0x38/0x68
                    dev_deactivate_many+0xac/0x388
                    dev_deactivate+0x38/0x6c
                    linkwatch_do_dev+0x70/0x8c
                    __linkwatch_run_queue+0xd4/0x1e8
                    linkwatch_event+0x24/0x34
                    process_one_work+0x284/0x744
                    worker_thread+0x28/0x4bc
                    kthread+0xec/0x110
                    ret_from_fork+0x14/0x28
   IN-SOFTIRQ-W at:
                    lock_acquire.part.0+0xb0/0x248
                    _raw_spin_lock+0x38/0x48
                    sch_direct_xmit+0x16c/0x2e8
                    __dev_queue_xmit+0x41c/0x1224
                    ip6_finish_output2+0x5f4/0xc64
                    ndisc_send_skb+0x4cc/0x81c
                    addrconf_rs_timer+0xb0/0x2f8
                    call_timer_fn+0xb4/0x33c
                    expire_timers+0xb4/0x10c
                    run_timer_softirq+0xf8/0x2a8
                    __do_softirq+0xd4/0x5fc
                    __irq_exit_rcu+0x138/0x17c
                    irq_exit+0x8/0x28
                    __irq_svc+0x90/0xbc
                    arch_cpu_idle+0x30/0x3c
                    default_idle_call+0x44/0xac
                    do_idle+0xc8/0x138
                    cpu_startup_entry+0x18/0x1c
                    rest_init+0xcc/0x168
                    arch_post_acpi_subsys_init+0x0/0x8
   INITIAL USE at:
                   lock_acquire.part.0+0xb0/0x248
                   _raw_spin_lock+0x38/0x48
                   netif_freeze_queues+0x38/0x68
                   dev_deactivate_many+0xac/0x388
                   dev_deactivate+0x38/0x6c
                   linkwatch_do_dev+0x70/0x8c
                   __linkwatch_run_queue+0xd4/0x1e8
                   linkwatch_event+0x24/0x34
                   process_one_work+0x284/0x744
                   worker_thread+0x28/0x4bc
                   kthread+0xec/0x110
                   ret_from_fork+0x14/0x28
 }
 ... key      at: [<c175974c>] netdev_xmit_lock_key+0x8/0x1c8
 ... acquired at:
   __lock_acquire+0x978/0x2978
   lock_acquire.part.0+0xb0/0x248
   _raw_spin_lock+0x38/0x48
   sch_direct_xmit+0x16c/0x2e8
   __dev_queue_xmit+0x41c/0x1224
   ip6_finish_output2+0x5f4/0xc64
   ndisc_send_skb+0x4cc/0x81c
   addrconf_rs_timer+0xb0/0x2f8
   call_timer_fn+0xb4/0x33c
   expire_timers+0xb4/0x10c
   run_timer_softirq+0xf8/0x2a8
   __do_softirq+0xd4/0x5fc
   __irq_exit_rcu+0x138/0x17c
   irq_exit+0x8/0x28
   __irq_svc+0x90/0xbc
   arch_cpu_idle+0x30/0x3c
   default_idle_call+0x44/0xac
   do_idle+0xc8/0x138
   cpu_startup_entry+0x18/0x1c
   rest_init+0xcc/0x168
   arch_post_acpi_subsys_init+0x0/0x8

stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G                 N 6.2.0-rc7-01749-gc54e1f7f7e36 #2786
Hardware name: Generic DT based system
 unwind_backtrace from show_stack+0x10/0x14
 show_stack from dump_stack_lvl+0x58/0x70
 dump_stack_lvl from mark_lock.part.0+0x59c/0x93c
 mark_lock.part.0 from __lock_acquire+0x978/0x2978
 __lock_acquire from lock_acquire.part.0+0xb0/0x248
 lock_acquire.part.0 from _raw_spin_lock+0x38/0x48
 _raw_spin_lock from sch_direct_xmit+0x16c/0x2e8
 sch_direct_xmit from __dev_queue_xmit+0x41c/0x1224
 __dev_queue_xmit from ip6_finish_output2+0x5f4/0xc64
 ip6_finish_output2 from ndisc_send_skb+0x4cc/0x81c
 ndisc_send_skb from addrconf_rs_timer+0xb0/0x2f8
 addrconf_rs_timer from call_timer_fn+0xb4/0x33c
 call_timer_fn from expire_timers+0xb4/0x10c
 expire_timers from run_timer_softirq+0xf8/0x2a8
 run_timer_softirq from __do_softirq+0xd4/0x5fc
 __do_softirq from __irq_exit_rcu+0x138/0x17c
 __irq_exit_rcu from irq_exit+0x8/0x28
 irq_exit from __irq_svc+0x90/0xbc
Exception stack(0xc1001f20 to 0xc1001f68)
1f20: ffffffff ffffffff 00000001 c011f840 c100e000 c100e000 c1009314 c1009370
1f40: c10f0c1a c0d5e564 c0f5da8c 00000000 00000000 c1001f70 c010f0bc c010f0c0
1f60: 600f0013 ffffffff
 __irq_svc from arch_cpu_idle+0x30/0x3c
 arch_cpu_idle from default_idle_call+0x44/0xac
 default_idle_call from do_idle+0xc8/0x138
 do_idle from cpu_startup_entry+0x18/0x1c
 cpu_startup_entry from rest_init+0xcc/0x168
 rest_init from arch_post_acpi_subsys_init+0x0/0x8

Fix this by using spin_lock_irqsave/spin_lock_irqrestore also
inside lan966x_ptp_irq_handler.

Fixes: e85a96e4 ("net: lan966x: Add support for ptp interrupts")
Signed-off-by: default avatarHoratiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20230217210917.2649365-1-horatiu.vultur@microchip.com


Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent 195d6cc9
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment