drm/i915/dp: Change a link bandwidth computation for DP
Data M/N calculations were assumed a bpp as RGB format. But when we are using YCbCr 4:2:0 output format on DP, we should change bpp calculations as YCbCr 4:2:0 format. The pipe_bpp value was assumed RGB format, therefore, it was multiplied with 3. But YCbCr 4:2:0 requires a multiplier value to 1.5. Therefore we need to divide pipe_bpp to 2 while DP output uses YCbCr4:2:0 format. - RGB format bpp = bpc x 3 - YCbCr 4:2:0 format bpp = bpc x 1.5 But Link M/N values are calculated and applied based on the Full Clock for YCbCr 4:2:0. And DP YCbCr 4:2:0 does not need to pixel clock double for a dotclock caluation. Only for HDMI YCbCr 4:2:0 needs to pixel clock double for a dot clock calculation. It only affects dp and edp port which use YCbCr 4:2:0 output format. And for now, it does not consider a use case of DSC + YCbCr 4:2:0. v2: Addressed review comments from Ville. Remove a changing of pipe_bpp on intel_ddi_set_pipe_settings(). Because the pipe is running at the full bpp, keep pipe_bpp as RGB even though YCbCr 4:2:0 output format is used. Add a link bandwidth computation for YCbCr4:2:0 output format. v3: Addressed reivew comments from Ville. In order to make codes simple, it adds and uses intel_dp_output_bpp() function. v6: Link M/N values are calculated and applied based on the Full Clock for YCbCr420. The Bit per Pixel needs to be adjusted for YUV420 mode as it requires only half of the RGB case. - Link M/N values are calculated and applied based on the Full Clock - Data M/N values needs to be calculated considering the data is half due to subsampling Remove a doubling of pixel clock on a dot clock calculator for DP YCbCr 4:2:0. Rebase and remove a duplicate setting of vsc_sdp.DB17. Add a setting of dynamic range bit to vsc_sdp.DB17. Change Content Type bit to "Graphics" from "Not defined". Change a dividing of pipe_bpp to muliplying to constant values on a switch-case statement. v7: Addressed review comments from Ville. Move a setting of dynamic range bit and a setting of bpc which is based on pipe_bpp to a "drm/i915/dp: Program VSC Header and DB for Pixel Encoding/Colorimetry Format" commit. Change Content Type bit to "Not defined" from "Graphics". Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190521121721.32010-6-gwan-gyeong.mun@intel.com
parent
ec4401d3
Please register or sign in to comment