When the clock is less than 400K, some SD cards fail to initialize
because CLK_AUTO is enabled.

Fixes: fb8bd90f

 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221207051909.32126-1-wenchao.chen@unisoc.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

No functional modification involved.

drivers/mmc/host/sdhci-of-esdhc.c:243: warning: expecting prototype for _fixup(). Prototype was for esdhc_writel_fixup() instead.
drivers/mmc/host/sdhci-of-esdhc.c:117: warning: expecting prototype for _fixup(). Prototype was for esdhc_readl_fixup() instead.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3397


Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221209034134.38477-1-jiapeng.chong@linux.alibaba.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.

Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202212081138191215291@zte.com.cn


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

In case of error condition to avoid system crash Tegra SDMMC controller
requires CMD and DAT resets issued together. SDHCI controller FSM goes
into bad state due to rapid SD card hot-plug event. Issuing reset on the
CMD FSM before DATA FSM results in kernel panic, hence add support to
issue CMD and DAT resets together.

This is applicable to Tegra186 and later chips.

Signed-off-by: Aniruddha TVS Rao <anrao@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221206165945.3551774-7-thierry.reding@gmail.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

SMMU clients are supposed to program stream ID from their respective
address spaces instead of MC override. Define NVQUIRK_PROGRAM_STREAMID
and use it to program SMMU stream ID from the SDMMC client address
space.

Signed-off-by: Aniruddha TVS Rao <anrao@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221206165945.3551774-6-thierry.reding@gmail.com


[Ulf: Fixed a checkpatch error]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Create new SoC data structure for Tegra234 platforms. Additional
features, tap value configurations are added/updated for Tegra234
platform hence separate Tegra194 and Tegra234 SoC data.

Signed-off-by: Aniruddha Tvs Rao <anrao@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221206165945.3551774-5-thierry.reding@gmail.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Sort includes alphabetically to make it easier to add new ones
subsequently.

Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221206165945.3551774-4-thierry.reding@gmail.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Access to the internals of struct iommu_fwspec by non-IOMMU drivers is
discouraged. Many drivers for Tegra SoCs, however, need access to their
IOMMU stream IDs so that they can be programmed into various hardware
registers.

Formalize this access into a common helper to make it easier to audit
and maintain.

Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221206165945.3551774-3-thierry.reding@gmail.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

This structure is to be considered private to the IOMMU API. Except for
very few exceptions, IOMMU consumer drivers should treat this as opaque
data.

Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221206165945.3551774-2-thierry.reding@gmail.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

With W=1, we can see this gcc warning:

drivers/mmc/host/sdhci-brcmstb.c:182:34: warning: ‘sdhci_brcm_of_match’ defined but not used [-Wunused-const-variable=]
  182 | static const struct of_device_id sdhci_brcm_of_match[] = {
      |                                  ^~~~~~~~~~~~~~~~~~~

Rather than play around more with #ifdef's, the simplest solution is to
just mark this __maybe_unused.

Fixes: 50bfe185

 ("mmc: sdhci-brcmstb: Allow building with COMPILE_TEST")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202212060700.NjMecjxS-lkp@intel.com/


Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221205160353.1.I5fa28f1045f17fb9285d507accf139f8b2a8f4b5@changeid


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

SM8350, SM8450 and SM8550 SDHCI controllers for SD card are marked with
dma-coherent, so allow it.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221204094717.74016-5-krzysztof.kozlowski@linaro.org


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

There is no need to explicitly list properties already brought by
mmc-controller.yaml schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221204094717.74016-4-krzysztof.kozlowski@linaro.org


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Drop unnecessary quotes from $ref.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221204094717.74016-3-krzysztof.kozlowski@linaro.org


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Cleanup coding style without functional changes:
1. Drop unnecessary quotes from $ref.
2. Use simple enum for compatible enumeration and sort entries.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221204094717.74016-2-krzysztof.kozlowski@linaro.org


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The Linux SDHCI driver core reads 'sdhci-caps' and 'sdhci-caps-mask'
properties and few devices already use it (e.g. Qualcomm SM8450), so add
them to a shared SDHCI bindings.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221204094717.74016-1-krzysztof.kozlowski@linaro.org


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

vub300_enable_sdio_irq() works with mutex and need TASK_RUNNING here.
Ensure that we mark current as TASK_RUNNING for sleepable context.

[   77.554641] do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff92a72c1d>] sdio_irq_thread+0x17d/0x5b0
[   77.554652] WARNING: CPU: 2 PID: 1983 at kernel/sched/core.c:9813 __might_sleep+0x116/0x160
[   77.554905] CPU: 2 PID: 1983 Comm: ksdioirqd/mmc1 Tainted: G           OE      6.1.0-rc5 #1
[   77.554910] Hardware name: Intel(R) Client Systems NUC8i7BEH/NUC8BEB, BIOS BECFL357.86A.0081.2020.0504.1834 05/04/2020
[   77.554912] RIP: 0010:__might_sleep+0x116/0x160
[   77.554920] RSP: 0018:ffff888107b7fdb8 EFLAGS: 00010282
[   77.554923] RAX: 0000000000000000 RBX: ffff888118c1b740 RCX: 0000000000000000
[   77.554926] RDX: 0000000000000001 RSI: 0000000000000004 RDI: ffffed1020f6ffa9
[   77.554928] RBP: ffff888107b7fde0 R08: 0000000000000001 R09: ffffed1043ea60ba
[   77.554930] R10: ffff88821f5305cb R11: ffffed1043ea60b9 R12: ffffffff93aa3a60
[   77.554932] R13: 000000000000011b R14: 7fffffffffffffff R15: ffffffffc0558660
[   77.554934] FS:  0000000000000000(0000) GS:ffff88821f500000(0000) knlGS:0000000000000000
[   77.554937] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   77.554939] CR2: 00007f8a44010d68 CR3: 000000024421a003 CR4: 00000000003706e0
[   77.554942] Call Trace:
[   77.554944]  <TASK>
[   77.554952]  mutex_lock+0x78/0xf0
[   77.554973]  vub300_enable_sdio_irq+0x103/0x3c0 [vub300]
[   77.554981]  sdio_irq_thread+0x25c/0x5b0
[   77.555006]  kthread+0x2b8/0x370
[   77.555017]  ret_from_fork+0x1f/0x30
[   77.555023]  </TASK>
[   77.555025] ---[ end trace 0000000000000000 ]---

Fixes: 88095e7b

 ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87dc45b122d26d63c80532976813c9365d7160b3.1670140888.git.deren.wu@mediatek.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Taking over as upstream maintainer for Broadcom SDHCI
driver from Al Cooper.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221202212119.43214-1-kdasu.kdev@gmail.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The highest clock frequency for eMMC HS200 mode on ls1043a
is 116.7Mhz according to its specification.
So add the limit to gate the frequency.

Signed-off-by: Andy Tang <andy.tang@nxp.com>
Link: https://lore.kernel.org/r/20221202075905.25363-1-andy.tang@nxp.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The semicolon after the "}" is unneeded.

Signed-off-by: zhang songyi <zhang.songyi@zte.com.cn>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/202212021031575255977@zte.com.cn


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Let's use pr_err() to output the error messages and let's extend a comment
to clarify why returning 0 (success) in one case make sense.

Fixes: c784f927

 ("mmc: core: Read the SD function extension registers for power management")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
[Ulf: Clarified the comment and the commit-msg]
Link: https://lore.kernel.org/r/20221130134920.2109-1-thunder.leizhen@huawei.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The current comment on wakeup-source is a little confusing because
the word deprecated can be interpreted at first glance to mean that
wakeup-source is deprecated. Also mentioning the obsolete property
confuses more than it helps. Therefore, the comment should be removed
completely because the enable-sdio-wakeup property is not used in
any current DTs. Also remove enable-sdio-wakeup reference in
wakeup-source.txt

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221130121033.7270-1-cniedermaier@dh-electronics.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

To avoid glitches on the clock line, the card clock is disabled when making
timing changes. Do not do that separately for HISPD and UHS settings.

Tested-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221128133259.38305-4-adrian.hunter@intel.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Current next_tag selection will cause a large delay in some requests and
destroy the scheduling results of the block scheduling layer. Because the
issued mrq tags cannot ensure that each time is sequential, especially when
the IO load is heavy. In the fio performance test, we found that 4k random
read data was sent to mmc_hsq to start calling request_atomic It takes
nearly 200ms to process the request, while mmc_hsq has processed thousands
of other requests. So we use fifo here to ensure the first in, first out
feature of the request and avoid adding additional delay to the request.

Reviewed-by: Wenchao Chen <wenchao.chen@unisoc.com>
Signed-off-by: Michael Wu <michael@allwinnertech.com>
Link: https://lore.kernel.org/r/20221128093847.22768-1-michael@allwinnertech.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

As the alloc_ordered_workqueue may return NULL pointer, it should be better
to add check for the return value. Moreover, the msb->io_queue should be
freed if error occurs later.

Fixes: 0ab30494

 ("memstick: add support for legacy memorysticks")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20221126012558.34374-1-jiasheng@iscas.ac.cn


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Now, CONFIG_DEBUG_FS is scattered in various functions, to make code
clean centralized processing CONFIG_DEBUG_FS in mmc debugfs module.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20221126102520.2824574-1-yebin@huaweicloud.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Replace code with the already defined function. No functional changes.

Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221124080031.14690-1-cw9316.lee@samsung.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

./drivers/mmc/host/sunplus-mmc.c:321:2-3: Unneeded semicolon

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3238


Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221123021221.9646-1-yang.lee@linux.alibaba.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The workaround of pretending R1B non-data transfers are data transfers in
order for the busy timeout to be respected by the host controller driver is
removed. It wasn't useful in a long time.

Initially the workaround ensured that R1B commands did not time out by
setting the data timeout to be the command timeout in commit cb87ea28
("mmc: core: Add mmc CMD+ACMD passthrough ioctl"). This was moved inside an
if-clause with idata->buf_bytes being set in commit 4d6144de

 ("mmc:
core: check for zero length ioctl data"). Since the workaround is now
inside the idata->buf_bytes clause and intended to fix R1B non-data
transfers, that do not have buf_bytes set, we can remove the workaround
altogether. This was dead code, since data transfers doesn't use R1B
commands.

Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/57d4aceb25254e448bd3e575bd99b0c2@hyperstone.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Linux *_bit accessors take plain bit numbers, no need for BIT().

Fixes: c330601c

 ("mmc: renesas_sdhi: take DMA end interrupts into account")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20221122080554.4468-1-wsa+renesas@sang-engineering.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

This is a patch for mmc driver for Sunplus SP7021 SOC.
Supports eMMC 4.41 DDR 104MB/s speed mode.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tony Huang <tonyhuang.sunplus@gmail.com>
Link: https://lore.kernel.org/r/c92d67596f3cc10d41585b9ab82be7da2cc4c9d8.1669023361.git.tonyhuang.sunplus@gmail.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Add MMC YAML file for Sunplus SP7021.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tony Huang <tonyhuang.sunplus@gmail.com>
Link: https://lore.kernel.org/r/8c8fbc29524819d8ab45a4fe75311b3b7b567650.1669023361.git.tonyhuang.sunplus@gmail.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Makes the code more readable.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221120113457.42010-5-wsa+renesas@sang-engineering.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Add a macro to check for a quirk because it a) ensures that the check
for non-empty 'quirks' struct is not forgotten and b) is easier to read.
Convert existing quirk access as well.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221120113457.42010-4-wsa+renesas@sang-engineering.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Up to now, HS400 adjustment mode was only disabled on soft reset when a
calibration table was in use. It is safer, though, to disable it as soon
as the instance has an adjustment related quirk set, i.e. bad taps or a
calibration table.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221120113457.42010-3-wsa+renesas@sang-engineering.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

We need the SCC pointer to reset the device, so populate it even when we
don't need it for tuning.

Fixes: 45bffc37

 ("mmc: renesas_sdhi: only reset SCC when its pointer is populated")
Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221120113457.42010-2-wsa+renesas@sang-engineering.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Replace the open-code with device_match_of_node().

Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202211171524116446204@zte.com.cn


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Now that the SDMMC driver supports setting the clk-phase, we can remove
the need to do it in the clock driver.

Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20221114230217.202634-5-dinguyen@kernel.org


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The clock-phase settings for the SDMMC controller in the SoCFPGA
platforms reside in a register in the System Manager. Add a method
to access that register through the syscon interface.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20221114230217.202634-4-dinguyen@kernel.org


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Document the optional "altr,sysmgr-syscon" binding that is used to
access the System Manager register that controls the SDMMC clock
phase.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221114230217.202634-1-dinguyen@kernel.org


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

When cmd->opcode == MMC_SEND_TUNING_BLOCK, the SDHCI_TRANSFER_MODE
should also be kept

Signed-off-by: Charl Liu <charl.liu@bayhubtech.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221111122314.307-1-charl.liu@bayhubtech.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>