Pull regmap updates from Mark Brown:
 "A couple of fixes in this release, plus a couple of new features for
  regmap-irq - we now support sub-irq blocks at arbatrary addresses and
  can remap configuration bitfields for interrupts split over multiple
  registers to the Linux configurations"

* tag 'regmap-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap-irq: Fix dereference of a potentially null d->virt_buf
  regmap-irq: Add driver callback to configure virtual regs
  regmap-irq: Introduce virtual regs to handle more config regs
  regmap-irq: Extend sub-irq to support non-fixed reg strides
  regmap: set debugfs_name to NULL after it is freed

Pull mtd updates from Miquel Raynal:
 "MTD core:
   - Handle possible -EPROBE_DEFER from parse_mtd_partitions()
   - Constify buf in mtd_write_user_prot_reg()
   - Constify name param in mtd_bdi_init
   - Fix fall-through warnings for Clang
   - Get rid of Big MTD Lock ouf of mtdchar
   - Drop mtd_mutex usage from mtdchar_open()
   - Don't lock when recursively deleting partitions
   - Use module_mtd_blktrans() to register driver when relevant
   - Parse MTD as NVMEM cells
   - New OTP (one-time-programmable) erase ioctl
   - Require write permissions for locking and badblock ioctls
   - physmap:
      - Fix error return code of physmap_flash_remove()
      - physmap-bt1-rom: Fix unintentional stack access
   - ofpart parser:
      - Support Linksys Northstar partitions
      - Make symbol 'bcm4908_partitions_quirks' static
      - Limit parsing of deprecated DT syntax
      - Support BCM4908 fixed partitions
   - Qcom parser:
      - Incompatible with spi-nor 4k sectors
      - Fix error condition
      - Extend Qcom SMEM parser to SPI flash

  CFI:
   - Disable broken buffered writes for CFI chips within ID 0x2201
   - Address a Coverity report for unused value

  SPI NOR core:
   - Add OTP support
   - Fix module unload while an op in progress
   - Add various cleanup patches
   - Add Michael and Pratyush as designated reviewers in MAINTAINERS

  SPI NOR controller drivers:
   - intel-spi:
      - Move platform data header to x86 subfolder

  NAND core:
   - Fix error handling in nand_prog_page_op() (x2)
   - Add a helper to retrieve the number of ECC bytes per step
   - Add a helper to retrieve the number of ECC steps
   - Let ECC engines advertize the exact number of steps
   - ECC Hamming:
      - Populate the public nsteps field
      - Use the public nsteps field
   - ECC BCH:
      - Populate the public nsteps field
      - Use the public nsteps field

  Raw NAND core:
   - Add support for secure regions in NAND memory
   - Try not to use the ECC private structures
   - Remove duplicate include in rawnand.h
   - BBT:
      - Skip bad blocks when searching for the BBT in NAND (APPLIED THEN REVERTED)

  Raw NAND controller drivers:
   - Qcom:
      - Convert bindings to YAML
      - Use dma_mapping_error() for error check
      - Add missing nand_cleanup() in error path
      - Return actual error code instead of -ENODEV
      - Update last code word register
      - Add helper to configure location register
      - Rename parameter name in macro
      - Add helper to check last code word
      - Convert nandc to chip in Read/Write helper
      - Update register macro name for 0x2c offset
   - GPMI:
      - Fix a double free in gpmi_nand_init
   - Rockchip:
      - Use flexible-array member instead of zero-length array
   - Atmel:
      - Update ecc_stats.corrected counter
   - MXC:
      - Remove unneeded of_match_ptr()
   - R852:
      - replace spin_lock_irqsave by spin_lock in hard IRQ
   - Brcmnand:
      - Move to polling in pio mode on oops write
      - Read/write oob during EDU transfer
      - Fix OOB R/W with Hamming ECC
   - FSMC:
      - Fix error code in fsmc_nand_probe()
   - OMAP:
      - Use ECC information from the generic structures

  SPI-NAND core:
   - Add missing MODULE_DEVICE_TABLE()

  SPI-NAND drivers:
   - gigadevice: Support GD5F1GQ5UExxG"

* tag 'mtd/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (89 commits)
  Revert "mtd: rawnand: bbt: Skip bad blocks when searching for the BBT in NAND"
  mtd: core: Constify buf in mtd_write_user_prot_reg()
  Revert "mtd: spi-nor: macronix: Add support for mx25l51245g"
  mtd: spi-nor: core: Fix an issue of releasing resources during read/write
  mtd: cfi_cmdset_0002: remove redundant assignment to variable timeo
  mtd: cfi_cmdset_0002: Disable buffered writes for AMD chip 0x2201
  mtd: rawnand: qcom: Use dma_mapping_error() for error check
  mtd: rawnand: gpmi: Fix a double free in gpmi_nand_init
  mtd: rawnand: qcom: Add missing nand_cleanup() in error path
  mtd: rawnand: Add support for secure regions in NAND memory
  dt-bindings: mtd: Add a property to declare secure regions in NAND chips
  dt-bindings: mtd: Convert Qcom NANDc binding to YAML
  mtd: spi-nor: winbond: add OTP support to w25q32fw/jw
  mtd: spi-nor: implement OTP support for Winbond and similar flashes
  mtd: spi-nor: add OTP support
  mtd: spi-nor: swp: Improve code around spi_nor_check_lock_status_sr()
  mtd: spi-nor: Move Software Write Protection logic out of the core
  mtd: rawnand: bbt: Skip bad blocks when searching for the BBT in NAND
  include: linux: mtd: Remove duplicate include of nand.h
  mtd: parsers: ofpart: support Linksys Northstar partitions
  ...

Pull dmi update from Jean Delvare.

* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  MAINTAINERS: The DMI/SMBIOS tree has moved
  firmware/dmi: Include product_sku info to modalias

Pull device properties framework update from Rafael Wysocki:
 "Add MAINTAINERS entry for software nodes core code (Heikki Krogerus)"

* tag 'devprop-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  MAINTAINERS: Add entry for the software nodes

Pull power management updates from Rafael Wysocki:
 "These add some new hardware support (for example, IceLake-D idle
  states in intel_idle), fix some issues (for example, the handling of
  negative "sleep length" values in cpuidle governors), add new
  functionality to the existing drivers (for example, scale-invariance
  support in the ACPI CPPC cpufreq driver) and clean up code all over.

  Specifics:

   - Add idle states table for IceLake-D to the intel_idle driver and
     update IceLake-X C6 data in it (Artem Bityutskiy).

   - Fix the C7 idle state on Tegra114 in the tegra cpuidle driver and
     drop the unused do_idle() firmware call from it (Dmitry Osipenko).

   - Fix cpuidle-qcom-spm Kconfig entry (He Ying).

   - Fix handling of possible negative tick_nohz_get_next_hrtimer()
     return values of in cpuidle governors (Rafael Wysocki).

   - Add support for frequency-invariance to the ACPI CPPC cpufreq
     driver and update the frequency-invariance engine (FIE) to use it
     as needed (Viresh Kumar).

   - Simplify the default delay_us setting in the ACPI CPPC cpufreq
     driver (Tom Saeger).

   - Clean up frequency-related computations in the intel_pstate cpufreq
     driver (Rafael Wysocki).

   - Fix TBG parent setting for load levels in the armada-37xx cpufreq
     driver and drop the CPU PM clock .set_parent method for armada-37xx
     (Marek Behún).

   - Fix multiple issues in the armada-37xx cpufreq driver (Pali Rohár).

   - Fix handling of dev_pm_opp_of_cpumask_add_table() return values in
     cpufreq-dt to take the -EPROBE_DEFER one into acconut as
     appropriate (Quanyang Wang).

   - Fix format string in ia64-acpi-cpufreq (Sergei Trofimovich).

   - Drop the unused for_each_policy() macro from cpufreq (Shaokun
     Zhang).

   - Simplify computations in the schedutil cpufreq governor to avoid
     unnecessary overhead (Yue Hu).

   - Fix typos in the s5pv210 cpufreq driver (Bhaskar Chowdhury).

   - Fix cpufreq documentation links in Kconfig (Alexander Monakov).

   - Fix PCI device power state handling in pci_enable_device_flags() to
     avoid issuse in some cases when the device depends on an ACPI power
     resource (Rafael Wysocki).

   - Add missing documentation of pm_runtime_resume_and_get() (Alan
     Stern).

   - Add missing static inline stub for pm_runtime_has_no_callbacks() to
     pm_runtime.h and drop the unused try_to_freeze_nowarn() definition
     (YueHaibing).

   - Drop duplicate struct device declaration from pm.h and fix a
     structure type declaration in intel_rapl.h (Wan Jiabing).

   - Use dev_set_name() instead of an open-coded equivalent of it in the
     wakeup sources code and drop a redundant local variable
     initialization from it (Andy Shevchenko, Colin Ian King).

   - Use crc32 instead of md5 for e820 memory map integrity check during
     resume from hibernation on x86 (Chris von Recklinghausen).

   - Fix typos in comments in the system-wide and hibernation support
     code (Lu Jialin).

   - Modify the generic power domains (genpd) code to avoid resuming
     devices in the "prepare" phase of system-wide suspend and
     hibernation (Ulf Hansson).

   - Add Hygon Fam18h RAPL support to the intel_rapl power capping
     driver (Pu Wen).

   - Add MAINTAINERS entry for the dynamic thermal power management
     (DTPM) code (Daniel Lezcano).

   - Add devm variants of operating performance points (OPP) API
     functions and switch over some users of the OPP framework to the
     new resource-managed API (Yangtao Li and Dmitry Osipenko).

   - Update devfreq core:

      * Register devfreq devices as cooling devices on demand (Daniel
        Lezcano).

      * Add missing unlock opeation in devfreq_add_device() (Lukasz
        Luba).

      * Use the next frequency as resume_freq instead of the previous
        frequency when using the opp-suspend property (Dong Aisheng).

      * Check get_dev_status in devfreq_update_stats() (Dong Aisheng).

      * Fix set_freq path for the userspace governor in Kconfig (Dong
        Aisheng).

      * Remove invalid description of get_target_freq() (Dong Aisheng).

   - Update devfreq drivers:

      * imx8m-ddrc: Remove imx8m_ddrc_get_dev_status() and unneeded
        of_match_ptr() (Dong Aisheng, Fabio Estevam).

      * rk3399_dmc: dt-bindings: Add rockchip,pmu phandle and drop
        references to undefined symbols (Enric Balletbo i Serra, Gaël
        PORTAY).

      * rk3399_dmc: Use dev_err_probe() to simplify the code (Krzysztof
        Kozlowski).

      * imx-bus: Remove unneeded of_match_ptr() (Fabio Estevam).

   - Fix kernel-doc warnings in three places (Pierre-Louis Bossart).

   - Fix typo in the pm-graph utility code (Ricardo Ribalda)"

* tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
  PM: wakeup: remove redundant assignment to variable retval
  PM: hibernate: x86: Use crc32 instead of md5 for hibernation e820 integrity check
  cpufreq: Kconfig: fix documentation links
  PM: wakeup: use dev_set_name() directly
  PM: runtime: Add documentation for pm_runtime_resume_and_get()
  cpufreq: intel_pstate: Simplify intel_pstate_update_perf_limits()
  cpufreq: armada-37xx: Fix module unloading
  cpufreq: armada-37xx: Remove cur_frequency variable
  cpufreq: armada-37xx: Fix determining base CPU frequency
  cpufreq: armada-37xx: Fix driver cleanup when registration failed
  clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0
  clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz
  cpufreq: armada-37xx: Fix the AVS value for load L1
  clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock
  cpufreq: armada-37xx: Fix setting TBG parent for load levels
  cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration
  cpuidle: tegra: Remove do_idle firmware call
  cpuidle: tegra: Fix C7 idling state on Tegra114
  PM: sleep: fix typos in comments
  cpufreq: Remove unused for_each_policy macro
  ...

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to the most recent upstream
  revision including (but not limited to) new material introduced in the
  6.4 version of the spec, update message printing in the ACPI-related
  code, address a few issues and clean up code in a number of places.

  Specifics:

   - Update ACPICA code in the kernel to upstream revision 20210331
     including the following changes:

      * Add parsing for IVRS IVHD 40h and device entry F0h (Alexander
        Monakov).

      * Add new CEDT table for CXL 2.0 and iASL support for it (Ben
        Widawsky, Bob Moore).

      * NFIT: add Location Cookie field (Bob Moore).

      * HMAT: add new fields/flags (Bob Moore).

      * Add new flags in SRAT (Bob Moore).

      * PMTT: add new fields/structures (Bob Moore).

      * Add CSI2Bus resource template (Bob Moore).

      * iASL: Decode subtable type field for VIOT (Bob Moore).

      * Fix various typos and spelling mistakes (Colin Ian King).

      * Add new predefined objects _BPC, _BPS, and _BPT (Erik Kaneda).

      * Add USB4 capabilities UUID (Erik Kaneda).

      * Add CXL ACPI device ID and _CBR object (Erik Kaneda).

      * MADT: add Multiprocessor Wakeup Structure (Erik Kaneda).

      * PCCT: add support for subtable type 5 (Erik Kaneda).

      * PPTT: add new version of subtable type 1 (Erik Kaneda).

      * Add SDEV secure access components (Erik Kaneda).

      * Add support for PHAT table (Erik Kaneda).

      * iASL: Add definitions for the VIOT table (Jean-Philippe
        Brucker).

      * acpisrc: Add missing conversion for VIOT support (Jean-Philippe
        Brucker).

      * IORT: Updates for revision E.b (Shameer Kolothum).

   - Rearrange message printing in ACPI-related code to avoid using the
     ACPICA's internal message printing macros outside ACPICA and do
     some related code cleanups (Rafael Wysocki).

   - Modify the device enumeration code to turn off all of the unused
     ACPI power resources at the end (Rafael Wysocki).

   - Change the ACPI power resources handling code to turn off unused
     ACPI power resources without checking their status which should not
     be necessary by the spec (Rafael Wysocki).

   - Add empty stubs for CPPC-related functions to be used when
     CONFIG_ACPI_CPPC_LIB is not set (Rafael Wysocki).

   - Simplify device enumeration code (Rafael Wysocki).

   - Change device enumeration code to use match_string() for string
     matching (Andy Shevchenko).

   - Modify irqresource_disabled() to retain the resouce flags that have
     been set already (Angela Czubak).

   - Add native backlight whitelist entry for GA401/GA502/GA503 (Luke
     Jones).

   - Modify the ACPI backlight driver to let the native backlight
     handling take over on hardware-reduced systems (Hans de Goede).

   - Introduce acpi_dev_get() and switch over the ACPI core code to
     using it (Andy Shevchenko).

   - Use kobj_attribute as callback argument instead of a local struct
     type in the CPPC linrary code (Nathan Chancellor).

   - Drop unneeded initializatio of a static variable from the ACPI
     processor driver (Tian Tao).

   - Drop unnecessary local variable assignment from the ACPI APEI code
     (Colin Ian King).

   - Document for_each_acpi_dev_match() macro (Andy Shevchenko).

   - Address assorted coding style issues in multiple places (Xiaofei
     Tan).

   - Capitalize TLAs in a few comments (Andy Shevchenko).

   - Correct assorted typos in comments (Tom Saeger)"

* tag 'acpi-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (68 commits)
  ACPI: video: use native backlight for GA401/GA502/GA503
  ACPI: APEI: remove redundant assignment to variable rc
  ACPI: utils: Capitalize abbreviations in the comments
  ACPI: utils: Document for_each_acpi_dev_match() macro
  ACPI: bus: Introduce acpi_dev_get() and reuse it in ACPI code
  ACPI: scan: Utilize match_string() API
  resource: Prevent irqresource_disabled() from erasing flags
  ACPI: CPPC: Replace cppc_attr with kobj_attribute
  ACPI: scan: Call acpi_get_object_info() from acpi_set_pnp_ids()
  ACPI: scan: Drop sta argument from acpi_init_device_object()
  ACPI: scan: Drop sta argument from acpi_add_single_object()
  ACPI: scan: Rearrange checks in acpi_bus_check_add()
  ACPI: scan: Fold acpi_bus_type_and_status() into its caller
  ACPI: video: Check LCD flag on ACPI-reduced-hardware devices
  ACPI: utils: Add acpi_reduced_hardware() helper
  ACPI: dock: fix some coding style issues
  ACPI: sysfs: fix some coding style issues
  ACPI: PM: add a missed blank line after declarations
  ACPI: custom_method: fix a coding style issue
  ACPI: CPPC: fix some coding style issues
  ...

Pull hwmon updates from Guenter Roeck:
 "The most notable change is the removal of the amd_energy driver. It
  was rendered all but unusable by making its attributes privileged-only
  to work around a security issue. A suggested remedy was rejected by
  AMD, so the only real solution was to remove the driver. For the
  future, we'll have to make sure that no privileged-access-only drivers
  are accepted into the hwmon subsystem in the first place. The hwmon
  ABI document was updated accordingly.

  Other changes:

  PMBus drivers:
   - Added driver for MAX15301
   - Added driver for BluTek BPA-RS600
   - Added driver for fsp-3y PSUs and PDUs
   - Added driver for Infineon IR36021
   - Added driver for ST STPDDC60
   - Added support for TI TPS53676 to tps53679 driver
   - Introduced PMBUS symbol namespace. This was made necessary by a
     suggestion to use its exported functions from outside the hwmon
     subsystem.
   - Minor improvements and bug fixes

  New drivers:
   - Driver for NZXT Kraken X42/X52/X62/X72

  Driver enhancements:
   - Added support for Intel D5005 to intel-m10-bmc-hwmon driver
   - Added support for NCT6686D to nct6683 driver

  Other:
   - Converted sch5627 and amd9240 drivers to
     hwmon_device_register_with_info()
   - Added support for fan drawers capability and present registers to
     mlxreg-fan driver
   - Added Dell Latitude E7440 to fan control whitelist in dell-smm
     driver
   - Replaced snprintf in show functions with sysfs_emit. Done with
     coccinelle script for all drivers to preempt endless per-driver
     submissions of the same change.
   - Use kobj_to_dev().  Another coccinelle based change to preempt
     endless per-driver submissions of the same change.
   - Various minor fixes and improvements"

* tag 'hwmon-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (38 commits)
  hwmon: Remove amd_energy driver
  hwmon: Clarify scope of attribute access
  hwmon: (pmbus) Introduce PMBUS symbol namespace
  hwmon: (pmbus) Add pmbus driver for MAX15301
  hwmon: (sch5627) Remove unnecessary error path
  hwmon: (sch5627) Use devres function
  hwmon: (pmbus/pxe1610) don't bail out when not all pages are active
  hwmon: Add driver for fsp-3y PSUs and PDUs
  hwmon: (intel-m10-bmc-hwmon) add sensor support of Intel D5005 card
  hwmon: (sch5627) Split sch5627_update_device()
  hwmon: (sch5627) Convert to hwmon_device_register_with_info()
  hwmon: (nct6683) remove useless function
  hwmon: (dell-smm) Add Dell Latitude E7440 to fan control whitelist
  MAINTAINERS: Add keyword pattern for hwmon registration functions
  hwmon: (mlxreg-fan) Add support for fan drawers capability and present registers
  hwmon: (pmbus/tps53679) Add support for TI TPS53676
  dt-bindings: Add trivial device entry for TPS53676
  hwmon: (ftsteutates) Rudimentary typo fixes
  hwmon: (pmbus) Add driver for BluTek BPA-RS600
  dt-bindings: Add vendor prefix and trivial device for BluTek BPA-RS600
  ...

Pull btrfs updates from David Sterba:
 "The updates this time are mostly stabilization, preparation and minor
  improvements.

  User visible improvements:

   - readahead for send, improving run time of full send by 10% and for
     incremental by 25%

   - make reflinks respect O_SYNC, O_DSYNC and S_SYNC flags

   - export supported sectorsize values in sysfs (currently only page
     size, more once full subpage support lands)

   - more graceful errors and warnings on 32bit systems when logical
     addresses for metadata reach the limit posed by unsigned long in
     page::index
      - error: fail mount if there's a metadata block beyond the limit
      - error: new metadata block would be at unreachable address
      - warn when 5/8th of the limit is reached, for 4K page systems
        it's 10T, for 64K page it's 160T

   - zoned mode
      - relocated zones get reset at the end instead of discard
      - automatic background reclaim of zones that have 75%+ of unusable
        space, the threshold is tunable in sysfs

  Fixes:

   - fsync and tree mod log fixes

   - fix inefficient preemptive reclaim calculations

   - fix exhaustion of the system chunk array due to concurrent
     allocations

   - fix fallback to no compression when racing with remount

   - preemptive fix for dm-crypt on zoned device that does not properly
     advertise zoned support

  Core changes:

   - add inode lock to synchronize mmap and other block updates (eg.
     deduplication, fallocate, fsync)

   - kmap conversions to new kmap_local API

   - subpage support (continued)
      - new helpers for page state/extent buffer tracking
      - metadata changes now support read and write

   - error handling through out relocation call paths

   - many other cleanups and code simplifications"

* tag 'for-5.13-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (112 commits)
  btrfs: zoned: automatically reclaim zones
  btrfs: rename delete_unused_bgs_mutex to reclaim_bgs_lock
  btrfs: zoned: reset zones of relocated block groups
  btrfs: more graceful errors/warnings on 32bit systems when reaching limits
  btrfs: zoned: fix unpaired block group unfreeze during device replace
  btrfs: fix race when picking most recent mod log operation for an old root
  btrfs: fix metadata extent leak after failure to create subvolume
  btrfs: handle remount to no compress during compression
  btrfs: zoned: fail mount if the device does not support zone append
  btrfs: fix race between transaction aborts and fsyncs leading to use-after-free
  btrfs: introduce submit_eb_subpage() to submit a subpage metadata page
  btrfs: make lock_extent_buffer_for_io() to be subpage compatible
  btrfs: introduce write_one_subpage_eb() function
  btrfs: introduce end_bio_subpage_eb_writepage() function
  btrfs: check return value of btrfs_commit_transaction in relocation
  btrfs: do proper error handling in merge_reloc_roots
  btrfs: handle extent corruption with select_one_root properly
  btrfs: cleanup error handling in prepare_to_merge
  btrfs: do not panic in __add_reloc_root
  btrfs: handle __add_reloc_root failures in btrfs_recover_relocation
  ...

Pull cifs updates from Steve French:

 - improvements to root directory metadata caching

 - addition of new "rasize" mount parameter which can significantly
   increase read ahead performance (e.g. copy can be much faster,
   especially with multichannel)

 - addition of support for insert and collapse range

 - improvements to error handling in mount

* tag '5.12-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (40 commits)
  cifs: update internal version number
  smb3: add rasize mount parameter to improve readahead performance
  smb3: limit noisy error
  cifs: fix leak in cifs_smb3_do_mount() ctx
  cifs: remove unnecessary copies of tcon->crfid.fid
  cifs: Return correct error code from smb2_get_enc_key
  cifs: fix out-of-bound memory access when calling smb3_notify() at mount point
  smb2: fix use-after-free in smb2_ioctl_query_info()
  cifs: export supported mount options via new mount_params /proc file
  cifs: log mount errors using cifs_errorf()
  cifs: add fs_context param to parsing helpers
  cifs: make fs_context error logging wrapper
  cifs: add FALLOC_FL_INSERT_RANGE support
  cifs: add support for FALLOC_FL_COLLAPSE_RANGE
  cifs: check the timestamp for the cached dirent when deciding on revalidate
  cifs: pass the dentry instead of the inode down to the revalidation check functions
  cifs: add a timestamp to track when the lease of the cached dir was taken
  cifs: add a function to get a cached dir based on its dentry
  cifs: Grab a reference for the dentry of the cached directory during the lifetime of the cache
  cifs: store a pointer to the root dentry in cifs_sb_info once we have completed mounting the share
  ...

Pull nfsd updates from Chuck Lever:
 "Highlights:

   - Update NFSv2 and NFSv3 XDR encoding functions

   - Add batch Receive posting to the server's RPC/RDMA transport (take 2)

   - Reduce page allocator traffic in svcrdma"

* tag 'nfsd-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (70 commits)
  NFSD: Use DEFINE_SPINLOCK() for spinlock
  sunrpc: Remove unused function ip_map_lookup
  NFSv4.2: fix copy stateid copying for the async copy
  UAPI: nfsfh.h: Replace one-element array with flexible-array member
  svcrdma: Clean up dto_q critical section in svc_rdma_recvfrom()
  svcrdma: Remove svc_rdma_recv_ctxt::rc_pages and ::rc_arg
  svcrdma: Remove sc_read_complete_q
  svcrdma: Single-stage RDMA Read
  SUNRPC: Move svc_xprt_received() call sites
  SUNRPC: Export svc_xprt_received()
  svcrdma: Retain the page backing rq_res.head[0].iov_base
  svcrdma: Remove unused sc_pages field
  svcrdma: Normalize Send page handling
  svcrdma: Add a "deferred close" helper
  svcrdma: Maintain a Receive water mark
  svcrdma: Use svc_rdma_refresh_recvs() in wc_receive
  svcrdma: Add a batch Receive posting mechanism
  svcrdma: Remove stale comment for svc_rdma_wc_receive()
  svcrdma: Provide an explanatory comment in CMA event handler
  svcrdma: RPCDBG_FACILITY is no longer used
  ...

Pull erofs updates from Gao Xiang:
 "In this cycle, we would like to introduce a new feature called big
  pcluster so EROFS can compress file data into more than 1 fs block and
  different pcluster size can be selected for each (sub-)files by
  design.

  The current EROFS test results on my laptop are [1]:

    Testscript: erofs-openbenchmark
    Testdata: enwik9 (1000000000 bytes)
     ________________________________________________________________
    |  file system  |   size    | seq read | rand read | rand9m read |
    |_______________|___________|_ MiB/s __|__ MiB/s __|___ MiB/s ___|
    |___erofs_4k____|_556879872_|_ 781.4 __|__ 55.3 ___|___ 25.3  ___|
    |___erofs_16k___|_452509696_|_ 864.8 __|_ 123.2 ___|___ 20.8  ___|
    |___erofs_32k___|_415223808_|_ 899.8 __|_ 105.8 _*_|___ 16.8 ____|
    |___erofs_64k___|_393814016_|_ 906.6 __|__ 66.6 _*_|___ 11.8 ____|
    |__squashfs_8k__|_556191744_|_  64.9 __|__ 19.3 ___|____ 9.1 ____|
    |__squashfs_16k_|_502661120_|_  98.9 __|__ 38.0 ___|____ 9.8 ____|
    |__squashfs_32k_|_458784768_|_ 115.4 __|__ 71.6 _*_|___ 10.0 ____|
    |_squashfs_128k_|_398204928_|_ 257.2 __|_ 253.8 _*_|___ 10.9 ____|
    |____ext4_4k____|____()_____|_ 786.6 __|__ 28.6 ___|___ 27.8 ____|

  which has been verified but I'd like warn it as experimental for a
  while. This matches erofs-utils dev branch and I'll also release a new
  userspace version for this later.

  Apart from that, several improvements are also included: eg complete a
  missing case for inplace I/O, optimize endio decompression logic for
  non-atomic contexts and support adjustable sliding window size, ... In
  addition to those, there are some cleanups as always.

  Summary:

   - avoid memory failure when applying rolling decompression

   - optimize endio decompression logic for non-atomic contexts

   - complete a missing case which can be safely selected for inplace
     I/O and thus decreasing more memory footprint

   - check unsupported on-disk inode i_format strictly

   - support adjustable lz4 sliding window size to decrease runtime
     memory footprint

   - support on-disk compression configurations

   - support big pcluster decompression

   - several code cleanups / spelling correction"

* tag 'erofs-for-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: (21 commits)
  erofs: enable big pcluster feature
  erofs: support decompress big pcluster for lz4 backend
  erofs: support parsing big pcluster compact indexes
  erofs: support parsing big pcluster compress indexes
  erofs: adjust per-CPU buffers according to max_pclusterblks
  erofs: add big physical cluster definition
  erofs: fix up inplace I/O pointer for big pcluster
  erofs: introduce physical cluster slab pools
  erofs: introduce multipage per-CPU buffers
  erofs: reserve physical_clusterbits[]
  erofs: Clean up spelling mistakes found in fs/erofs
  erofs: add on-disk compression configurations
  erofs: introduce on-disk lz4 fs configurations
  erofs: support adjust lz4 history window size
  erofs: introduce erofs_sb_has_xxx() helpers
  erofs: add unsupported inode i_format check
  erofs: don't use erofs_map_blocks() any more
  erofs: complete a missing case for inplace I/O
  erofs: use sync decompression for atomic contexts only
  erofs: use workqueue decompression for atomic contexts only
  ...

Pull file locking updates from Jeff Layton:
 "When we reworked the blocked locks into a tree structure instead of a
  flat list a few releases ago, we lost the ability to see all of the
  file locks in /proc/locks. Luo's patch fixes it to dump out all of the
  blocked locks instead, which restores the full output.

  This changes the format of /proc/locks as the blocked locks are shown
  at multiple levels of indentation now, but lslocks (the only common
  program I've ID'ed that scrapes this info) seems to be OK with that.

  Tian also contributed a small patch to remove a useless assignment"

* tag 'locks-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  fs/locks: remove useless assignment in fcntl_getlk
  fs/locks: print full locks information

Pull documentation updates from Jonathan Corbet:
 "It's been a relatively busy cycle in docsland, though more than
  usually well contained to Documentation/ itself. Highlights include:

   - The Chinese translators have been busy and show no signs of
     stopping anytime soon. Italian has also caught up.

   - Aditya Srivastava has been working on improvements to the
     kernel-doc script.

   - Thorsten continues his work on reporting-issues.rst and related
     documentation around regression reporting.

   - Lots of documentation updates, typo fixes, etc. as usual"

* tag 'docs-5.13' of git://git.lwn.net/linux: (139 commits)
  docs/zh_CN: add openrisc translation to zh_CN index
  docs/zh_CN: add openrisc index.rst translation
  docs/zh_CN: add openrisc todo.rst translation
  docs/zh_CN: add openrisc openrisc_port.rst translation
  docs/zh_CN: add core api translation to zh_CN index
  docs/zh_CN: add core-api index.rst translation
  docs/zh_CN: add cor...

Pull ARM Apple M1 platform support from Arnd Bergmann:
 "The Apple M1 is the processor used it all current generation Apple
  Macintosh computers. Support for this platform so far is rudimentary,
  but it boots and can use framebuffer and serial console over a special
  USB cable.

  Support for several essential on-chip devices (USB, PCIe, IOMMU, NVMe)
  is work in progress but was not ready in time.

  A very detailed description of what works is in the commit message of
  commit 1bb2fd38 ("Merge tag 'm1-soc-bringup-v5' [..]") and on the
  AsahiLinux wiki"

Link: https://lore.kernel.org/linux-arm-kernel/bdb18e9f-fcd7-1e31-2224-19c0e5090706@marcan.st/

* tag 'arm-apple-m1-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  asm-generic/io.h: Unbork ioremap_np() declaration
  arm64: apple: Add initial Apple Mac mini (M1, 2020) devicetree
  dt-bindings: display: Add apple,simple-framebuffer
  arm64: Kcon...

Pull ARM Nuvoton WPCM450 platform support from Arnd Bergmann:
 "The Nuvoton WPCM450 BMC is an older chip based on the ARM926 CPU core
  that remains in use on Supermicro X9 server boards among others.

  Support gets added for a particular server board using this SoC along
  with the basic platform bringup.

  As the platform is a predecessor to the npcm7xx platform we already
  support, it is added to the same directory, despite using a different
  name. It also seems to be related to the older w90x900/nuc9xx platform
  that was removed last year"

* tag 'arm-newsoc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: config: Add WPCM to multi v5
  MAINTAINERS: Add entry for Nuvoton WPCM450
  ARM: dts: Add devicetree for Supermicro X9SCi-LN4F based on WPCM450
  ARM: dts: Add devicetree for Nuvoton WPCM450 BMC chip
  watchdog: npcm: Add support for WPCM450
  ARM: npcm: Introduce Nuvoton WPCM450 SoC
  dt-bindings: watchdog: npcm: Add nuvoton,wpcm450-wdt
  dt-bindings: arm: npcm: Add nuvoton,wpcm450 compatible string
  dt-bindings: vendor-prefixes: Add Supermicro
  ARM: dts: Add board-specific compatible string to npcm750-evb devicetree
  dt-bindings: arm: Convert nuvoton,npcm750 binding to YAML

Pull ARM devicetree updates from Arnd Bergmann:
 "There are six new SoCs added this time.

  Apple M1 and Nuvoton WPCM450 have separate branches because they are
  new SoC families that require changes outside of device tree files.
  The other four are variations of already supported chips and get
  merged through this branch:

   - STMicroelectronics STM32H750 is one of many variants of STM32
     microcontrollers based on the Cortex-M7 core.

     This is particularly notable since we rarely add support for new
     MMU-less chips these days. In this case, the board that gets added
     along with the platform is not a SoC reference platform but the
     "Art Pi" (https://art-pi.gitee.io/website/) machine that was
     originally design for the RT-Thread RTOS.

   - NXP i.MX8QuadMax is a variant of the growing i.MX8
     embedded/industrial SoC family, using two Cortex-A72 and four
     Cortex-A53 cores.

     It gets added along with its reference board, the "NXP i.MX8QuadMax
     Multisensory Enablement Kit".

   - Qualcomm SC7280 is a Laptop SoC following the SC7180 (Snapdragon
     7c) that is used in some Chromebooks and Windows laptops.

     Only a reference board is added for the moment.

   - TI AM64x Sita4ra is a new version of the K3 SoC family for
     industrial control, motor control, remote IO, IoT gateway etc.,
     similar to the older AM65x family.

     Two reference machines are added alongside.

  Among the newly added machines, there is a very clear skew towards
  64-bit machines now, with 12 32-bit machines compared to 23 64-bit
  machines. The full list sorted by SoC is:

   - ASpeed AST2500 BMC: ASRock E3C246D4I Xeon server board
   - Allwinner A10: Topwise A721 Tablet
   - Amlogic GXL: MeCool KII TV box
   - Amlogic GXM: Mecool KIII, Minix Neo U9-H TV boxes
   - Broadcom BCM4908: TP-Link Archer C2300 V1 router
   - MStar SSD202D: M5Stack UnitV2 camera
   - Marvell Armada 38x: ATL-x530 ethernet switch
   - Mediatek MT8183 Chromebooks: Lenovo 10e, Acer Spin 311, Asus Flip
     CM3, Asus Detachable CM3
   - Mediatek MT8516/MT8183: OLogic Pumpkin Board
   - NXP i.MX7: reMarkable Tablet
   - NXP i.MX8M: Kontron pitx-imx8m, Engicam i.Core MX8M Mini
   - Nuvoton NPCM730: Quanta GBS BMC
   - Qualcomm X55: Telit FN980 TLB SoM, Thundercomm TurboX T55 SoM
   - Qualcomm MSM8998: OnePlus 5/5T phones
   - Qualcomm SM8350: Snapdragon 888 Mobile Hardware Development Kit
   - Rockchip RK3399: NanoPi R4S board
   - STM32MP1: Engicam MicroGEA STM32MP1 MicroDev 2.0 and SOM, EDIMM2.2
     Starter Kit, Carrier, SOM
   - TI AM65: Siemens SIMATIC IOT2050 gateway

  There is notable work going into extending already supported machines
  and SoCs:

   - ASpeed AST2500
   - Allwinner A23, A83t, A31, A64, H6
   - Amlogic G12B
   - Broadcom BCM4908
   - Marvell Armada 7K/8K/CN91xx
   - Mediatek MT6589, MT7622, MT8173, MT8183, MT8195
   - NXP i.MX8Q, i.MX8MM, i.MX8MP
   - Qualcomm MSM8916, SC7180, SDM845, SDX55, SM8350
   - Renesas R-Car M3, V3U
   - Rockchip RK3328, RK3399
   - STEricsson U8500
   - STMicroelectronics STM32MP141
   - Samsung Exynos 4412
   - TI K3-AM65, K3-J7200
   - TI OMAP3

  Among the treewide cleanups and bug fixes, two parts stand out:

   - There are a number of cleanups for issues pointed out by 'make
     dtbs_check' this time, and I expect more to come in the future as
     we increasingly check for regressions.

   - After a change to the MMC subsystem that can lead to unpredictable
     device numbers, several platforms add 'aliases' properties for
     these to give each MMC controller a fixed number"

* tag 'arm-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (516 commits)
  dt-bindings: mali-bifrost: add dma-coherent
  arm64: dts: amlogic: misc DT schema fixups
  arm64: dts: qcom: sc7180: Update iommu property for simultaneous playback
  arm64: dts: qcom: sc7180: pompom: Add "dmic_clk_en" + sound model
  arm64: dts: qcom: sc7180: coachz: Add "dmic_clk_en"
  ARM: dts: mstar: Add a dts for M5Stack UnitV2
  dt-bindings: arm: mstar: Add compatible for M5Stack UnitV2
  dt-bindings: vendor-prefixes: Add vendor prefix for M5Stack
  arm64: dts: mt8183: fix dtbs_check warning
  arm64: dts: mt8183-pumpkin: fix dtbs_check warning
  ARM: dts: aspeed: tiogapass: add hotplug controller
  ARM: dts: aspeed: amd-ethanolx: Enable all used I2C busses
  ARM: dts: aspeed: Rainier: Update to pass 2 hardware
  ARM: dts: aspeed: Rainier 1S4U: Fix fan nodes
  ARM: dts: aspeed: Rainier: Fix humidity sensor bus address
  ARM: dts: aspeed: Rainier: Fix PCA9552 on bus 8
  ARM: dts: qcom: sdx55: add IPA information
  ARM: dts: qcom: sdx55: Add basic devicetree support for Thundercomm T55
  dt-bindings: arm: qcom: Add binding for Thundercomm T55 kit
  ARM: dts: qcom: sdx55: Add basic devicetree support for Telit FN980 TLB
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "Updates for SoC specific drivers include a few subsystems that have
  their own maintainers but send them through the soc tree:

  TEE/OP-TEE:
   - Add tracepoints around calls to secure world

  Memory controller drivers:
   - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
   - Add debug statistics to Tegra20 memory controller
   - Update Tegra bindings and convert to dtschema

  ARM SCMI Firmware:
   - Support for modular SCMI protocols and vendor specific extensions
   - New SCMI IIO driver
   - Per-cpu DVFS

  The other driver changes are all from the platform maintainers
  directly and reflect the drivers that don't fit into any other
  subsystem as well as treewide changes for a particular platform.

  SoCFPGA:
   - Various cleanups contributed by Krzysztof Kozlowski

  Mediatek:
   - add MT8183 support to mutex driver
   - MMSYS: use per SoC array to describe the possible routing
   - add MMSYS support for MT8183 and MT8167
   - add support for PMIC wrapper with integrated arbiter
   - add support for MT8192/MT6873

  Tegra:
   - Bug fixes to PMC and clock drivers

  NXP/i.MX:
   - Update SCU power domain driver to keep console domain power on.
   - Add missing ADC1 power domain to SCU power domain driver.
   - Update comments for single global power domain in SCU power domain
     driver.
   - Add i.MX51/i.MX53 unique id support to i.MX SoC driver.

  NXP/FSL SoC driver updates for v5.13
   - Add ACPI support for RCPM driver
   - Use generic io{read,write} for QE drivers after performance
     optimized for PowerPC
   - Fix QBMAN probe to cleanup HW states correctly for kexec
   - Various cleanup and style fix for QBMAN/QE/GUTS drivers

  OMAP:
   - Preparation to use devicetree for genpd
   - ti-sysc needs iorange check improved when the interconnect target
     module has no control registers listed
   - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
     avoid issues with missing resources and unnecessary deferred probe
   - ti-sysc debug option can now detect more devices
   - ti-sysc now warns if an old incomplete devicetree data is found as
     we now rely on it being complete for am3 and 4
   - soc init code needs to check for prcm and prm nodes for omap4/5 and
     dra7
   - omap-prm driver needs to enable autoidle retention support for
     omap4
   - omap5 clocks are missing gpmc and ocmc clock registers
   - pci-dra7xx now needs to use builtin_platform_driver instead of
     using builtin_platform_driver_probe for deferred probe to work

  Raspberry Pi:
   - Fix-up all RPi firmware drivers so as for unbind to happen in an
     orderly fashion
   - Support for RPi's PoE hat PWM bus

  Qualcomm
   - Improved detection for SCM calling conventions
   - Support for OEM specific wifi firmware path
   - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"

* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
  soc: aspeed: fix a ternary sign expansion bug
  memory: mtk-smi: Add device-link between smi-larb and smi-common
  memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
  memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
  clk: socfpga: fix iomem pointer cast on 64-bit
  soc: aspeed: Adapt to new LPC device tree layout
  pinctrl: aspeed-g5: Adapt to new LPC device tree layout
  ipmi: kcs: aspeed: Adapt to new LPC DTS layout
  ARM: dts: Remove LPC BMC and Host partitions
  dt-bindings: aspeed-lpc: Remove LPC partitioning
  soc: fsl: enable acpi support in RCPM driver
  soc: qcom: mdt_loader: Detect truncated read of segments
  soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
  soc: qcom: pdr: Fix error return code in pdr_register_listener
  firmware: qcom_scm: Fix kernel-doc function names to match
  firmware: qcom_scm: Suppress sysfs bind attributes
  firmware: qcom_scm: Workaround lack of "is available" call on SC7180
  firmware: qcom_scm: Reduce locking section for __get_convention()
  firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
  Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
  ...

Pull ARM defconfig updates from Arnd Bergmann:
 "The usual set of defconfig updates, enabling newly added drivers.

  There are platform updates for at91, omap, ux500 and qcom platforms,
  and a number of changes to the arm64 defconfig"

* tag 'arm-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (34 commits)
  ARM: configs: qcom_defconfig: Reduce CMA size to 64MB
  ARM: configs: qcom_defconfig: Enable GLINK SMEM driver
  ARM: configs: qcom_defconfig: Enable SDX55 interconnect driver
  ARM: configs: qcom_defconfig: Enable Q6V5_PAS remoteproc driver
  ARM: configs: qcom_defconfig: Enable CPUFreq support
  ARM: configs: qcom_defconfig: Enable SDX55 A7 PLL and APCS clock driver
  ARM: configs: qcom_defconfig: Enable APCS IPC mailbox driver
  ARM: configs: Remove REGULATOR_USERSPACE_CONSUMER
  ARM: configs: ux500: Update for new drivers
  arm64: defconfig: Enable options to support panel display for Mediatek Chromebooks
  arm64: defconfig: Allow mt8173-based boards to boot from usb
  ARM: configs: at91: Modernize UBI defconfig part
  ARM: configs: at91: Add USB Video webcam class
  ARM: configs: at91: Add mtd tests as modules
  ARM: configs: at91: sama5: Add audio MIKROE PROTO board
  ARM: configs: at91: sama5: Enable LAN78XX as module
  ARM: configs: at91: sama5: PIOBU as built-in
  ARM: configs: at91: sama5: MCP16502 regulator as built-in
  ARM: configs: at91: sama5: enable the Hantro G1 engine
  ARM: configs: at91: sama5: update with savedefconfig
  ...

Pull ARM SoC updates from Arnd Bergmann:
 "Almost all SoC code changes this time are for the TI OMAP platform,
  which continues its decade-long quest to move from describing a
  complex SoC in code to device tree.

  Aside from this, the Uniphier platform has a new maintainer and some
  platforms have minor bugfixes and cleanups that were not urgent enough
  for v5.12"

* tag 'arm-soc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
  MAINTAINERS: Update ARM/UniPhier SoCs maintainers and status
  mailmap: Update email address for Nicolas Saenz
  MAINTAINERS: Update BCM2711/BCM2335 maintainer's mail
  ARM: exynos: correct kernel doc in platsmp
  ARM: hisi: use the correct HiSilicon copyright
  ARM: ux500: make ux500_cpu_die static
  ARM: s3c: Use pwm_get() in favour of pwm_request() in RX1950
  ARM: OMAP1: fix incorrect kernel-doc comment syntax in file
  ARM: OMAP2+: fix incorrect kernel-doc comment syntax in file
  ARM: OMAP2+: Use DEFINE_SPINLOCK() for spinlock
  ARM: at91: pm: Move prototypes to mutually included header
  ARM: OMAP2+: use true and false for bool variable
  ARM: OMAP2+: add missing call to of_node_put()
  ARM: OMAP2+: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
  ARM: imx: Kconfig: Fix typo in help
  ARM: mach-imx: Fix a spelling in the file pm-imx5.c
  bus: ti-sysc: Warn about old dtb for dra7 and omap4/5
  ARM: OMAP2+: Stop building legacy code for dra7 and omap4/5
  ARM: OMAP2+: Drop legacy platform data for omap5 hwmod
  ARM: OMAP2+: Drop legacy platform data for omap5 l3
  ...

Pull USB and Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver updates for
  5.13-rc1.

  Lots of little things in here, with loads of tiny fixes and cleanups
  over these drivers, as well as these "larger" changes:

   - thunderbolt updates and new features added

   - xhci driver updates and split out of a mediatek-specific xhci
     driver from the main xhci module to make it easier to work with
     (something that I have been wanting for a while).

   - loads of typec feature additions and updates

   - dwc2 driver updates

   - dwc3 driver updates

   - gadget driver fixes and minor updates

   - loads of usb-serial cleanups and fixes and updates

   - usbip documentation updates and fixes

   - lots of other tiny USB driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (371 commits)
  usb: Fix up movement of USB core kerneldoc location
  usb: dwc3: gadget: Handle DEV_TXF_FLUSH_BYPASS capability
  usb: dwc3: Capture new capability register GHWPARAMS9
  usb: gadget: prevent a ternary sign expansion bug
  usb: dwc3: core: Do core softreset when switch mode
  usb: dwc2: Get rid of useless error checks in suspend interrupt
  usb: dwc2: Update dwc2_handle_usb_suspend_intr function.
  usb: dwc2: Add exit hibernation mode before removing drive
  usb: dwc2: Add hibernation exiting flow by system resume
  usb: dwc2: Add hibernation entering flow by system suspend
  usb: dwc2: Allow exit hibernation in urb enqueue
  usb: dwc2: Move exit hibernation to dwc2_port_resume() function
  usb: dwc2: Move enter hibernation to dwc2_port_suspend() function
  usb: dwc2: Clear GINTSTS_RESTOREDONE bit after restore is generated.
  usb: dwc2: Clear fifo_map when resetting core.
  usb: dwc2: Allow exiting hibernation from gpwrdn rst detect
  usb: dwc2: Fix hibernation between host and device modes.
  usb: dwc2: Fix host mode hibernation exit with remote wakeup flow.
  usb: dwc2: Reset DEVADDR after exiting gadget hibernation.
  usb: dwc2: Update exit hibernation when port reset is asserted
  ...

Pull tty and serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver updates for 5.13-rc1.

  Actually busy this release, with a number of cleanups happening:

   - much needed core tty cleanups by Jiri Slaby

   - removal of unused and orphaned old-style serial drivers. If anyone
     shows up with this hardware, it is trivial to restore these but we
     really do not think they are in use anymore.

   - fixes and cleanups from Johan Hovold on a number of termios setting
     corner cases that loads of drivers got wrong as well as removing
     unneeded code due to tty core changes from long ago that were never
     propagated out to the drivers

   - loads of platform-specific serial port driver updates and fixes

   - coding style cleanups and other small fixes and updates all over
     the tty/serial tree.

  All of these have been in linux-next for a while now with no reported
  issues"

* tag 'tty-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits)
  serial: extend compile-test coverage
  serial: stm32: add FIFO threshold configuration
  dt-bindings: serial: 8250: update TX FIFO trigger level
  dt-bindings: serial: stm32: override FIFO threshold properties
  dt-bindings: serial: add RX and TX FIFO properties
  serial: xilinx_uartps: drop low-latency workaround
  serial: vt8500: drop low-latency workaround
  serial: timbuart: drop low-latency workaround
  serial: sunsu: drop low-latency workaround
  serial: sifive: drop low-latency workaround
  serial: txx9: drop low-latency workaround
  serial: sa1100: drop low-latency workaround
  serial: rp2: drop low-latency workaround
  serial: rda: drop low-latency workaround
  serial: owl: drop low-latency workaround
  serial: msm_serial: drop low-latency workaround
  serial: mpc52xx_uart: drop low-latency workaround
  serial: meson: drop low-latency workaround
  serial: mcf: drop low-latency workaround
  serial: lpc32xx_hs: drop low-latency workaround
  ...

Pull staging/IIO driver updates from Greg KH:
 "Here is the big set of staging and IIO driver updates for 5.13-rc1.

  Lots of little churn in here, and some larger churn as well. Major
  things are:

   - removal of wimax drivers, no one has this hardware anymore for this
     failed "experiment".

   - removal of the Google gasket driver, turns out no one wanted to
     maintain it or cares about it anymore, so they asked for it to be
     removed.

   - comedi finally moves out of the staging directory into drivers/comedi

     This is one of the oldest kernel subsystems around, being created
     in the 2.0 kernel days, and was one of the first things added to
     drivers/staging/ when that was created over 15 years ago.

     It should have been moved out of staging a long time ago, it's well
     maintained and used by loads of different devices in the real world
     every day. Nice to see this finally happen.

   - so many tiny coding style cleanups it's not funny.

     Perfect storm of at least 2 different intern project application
     deadlines combined to provide a huge number of new contributions in
     this area from people learning how to do kernel development. Great
     job to everyone involved here.

  There's also the normal updates for IIO drivers with new IIO drivers
  and updates all over that subsystem.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (907 commits)
  staging: octeon: Use 'for_each_child_of_node'
  Staging: rtl8723bs: rtw_xmit: fixed tabbing issue
  staging: rtl8188eu: remove unused function parameters
  staging: rtl8188eu: cmdThread is a task_struct
  staging: rtl8188eu: remove constant variable and dead code
  staging: rtl8188eu: change bLeisurePs' type to bool
  staging: rtl8723bs: remove empty #ifdef block
  staging: rtl8723bs: remove unused DBG_871X_LEVEL macro declarations
  staging: rtl8723bs: split too long line
  staging: rtl8723bs: fix indentation in if block
  staging: rtl8723bs: fix code indent issue
  staging: rtl8723bs: replace DBG_871X_LEVEL logs with netdev_*()
  staging: rtl8192e: indent statement properly
  staging: rtl8723bs: Remove led_blink_hdl() and everything related
  staging: comedi: move out of staging directory
  staging: rtl8723bs: remove sdio_drv_priv structure
  staging: rtl8723bs: remove unused argument in function
  staging: rtl8723bs: remove DBG_871X_SEL_NL macro declaration
  staging: rtl8723bs: replace DBG_871X_SEL_NL with netdev_dbg()
  staging: rtl8723bs: fix indentation issue introduced by long line split
  ...

Merge tag 'driver-core-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the "big" set of driver core changes for 5.13-rc1.

  Nothing major, just lots of little core changes and cleanups, notable
  things are:

   - finally set 'fw_devlink=on' by default.

     All reported issues with this have been shaken out over the past 9
     months or so, but we will be paying attention to any fallout here
     in case we need to revert this as the default boot value (symptoms
     of problems are a simple lack of booting)

   - fixes found to be needed by fw_devlink=on value in some subsystems
     (like clock).

   - delayed work initialization cleanup

   - driver core cleanups and minor updates

   - software node cleanups and tweaks

   - devtmpfs cleanups

   - minor debugfs cleanups

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (53 commits)
  devm-helpers: Fix devm_delayed_work_autocancel() kerneldoc
  PM / wakeup: use dev_set_name() directly
  software node: Allow node addition to already existing device
  kunit: software node: adhear to KUNIT formatting standard
  node: fix device cleanups in error handling code
  kobject_uevent: remove warning in init_uevent_argv()
  debugfs: Make debugfs_allow RO after init
  Revert "driver core: platform: Make platform_get_irq_optional() optional"
  media: ipu3-cio2: Switch to use SOFTWARE_NODE_REFERENCE()
  software node: Introduce SOFTWARE_NODE_REFERENCE() helper macro
  software node: Imply kobj_to_swnode() to be no-op
  software node: Deduplicate code in fwnode_create_software_node()
  software node: Introduce software_node_alloc()/software_node_free()
  software node: Free resources explicitly when swnode_register() fails
  debugfs: drop pointless nul-termination in debugfs_read_file_bool()
  driver core: add helper for deferred probe reason setting
  driver core: Improve fw_devlink & deferred_probe_timeout interaction
  of: property: fw_devlink: Add support for remote-endpoint
  driver core: platform: Make platform_get_irq_optional() optional
  driver core: Replace printf() specifier and drop unneeded casting
  ...

Pull char/misc driver updates from Greg KH:
 "Here is the big set of various smaller driver subsystem updates for
  5.13-rc1.

  Major bits in here are:

   - habanalabs driver updates

   - hwtracing driver updates

   - interconnect driver updates

   - mhi driver updates

   - extcon driver updates

   - fpga driver updates

   - new binder features added

   - nvmem driver updates

   - phy driver updates

   - soundwire driver updates

   - smaller misc and char driver fixes and updates.

   - bluetooth driver bugfix that maintainer wanted to go through this
     tree.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
  bluetooth: eliminate the potential race condition when removing the HCI controller
  coresight: etm-perf: Fix define build issue when built as module
  phy: Revert "phy: ti: j721e-wiz: add missing of_node_put"
  phy: ti: j721e-wiz: Add missing include linux/slab.h
  phy: phy-twl4030-usb: Fix possible use-after-free in twl4030_usb_remove()
  stm class: Use correct UUID APIs
  intel_th: pci: Add Alder Lake-M support
  intel_th: pci: Add Rocket Lake CPU support
  intel_th: Consistency and off-by-one fix
  intel_th: Constify attribute_group structs
  intel_th: Constify all drvdata references
  stm class: Remove an unused function
  habanalabs/gaudi: Fix uninitialized return code rc when read size is zero
  greybus: es2: fix kernel-doc warnings
  mei: me: add Alder Lake P device id.
  dw-xdata-pcie: Update outdated info and improve text format
  dw-xdata-pcie: Fix documentation build warns
  fbdev: zero-fill colormap in fbcmap.c
  firmware: qcom-scm: Fix QCOM_SCM configuration
  speakup: i18n: Switch to kmemdup_nul() in spk_msg_set()
  ...

Merge tag 'platform-drivers-x86-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates freom Hans de Goede:

 - lots of Microsoft Surface work

 - platform-profile support for HP and Microsoft Surface devices

 - new WMI Gigabyte motherboard temperature monitoring driver

 - Intel PMC improvements for Tiger Lake and Alder Lake

 - misc bugfixes, improvements and quirk additions all over

* tag 'platform-drivers-x86-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (87 commits)
  platform/x86: gigabyte-wmi: add support for B550M AORUS PRO-P
  platform/x86: intel_pmc_core: Uninitialized data in pmc_core_lpm_latch_mode_write()
  platform/x86: intel_pmc_core: add ACPI dependency
  platform/surface: aggregator: fix a bit test
  platform/x86: intel_pmc_core: Fix "unsigned 'ret' is never less than zero" smatch warning
  platform/x86: touchscreen_dmi: Add info for the Teclast Tbook 11 tablet
  platform/x86: intel_pmc_core: Add support for Alder Lake PCH-P
  platform/x86: intel_pmc_core: Add LTR registers for Tiger Lake
  platform/x86: intel_pmc_core: Add option to set/clear LPM mode
  platform/x86: intel_pmc_core: Add requirements file to debugfs
  platform/x86: intel_pmc_core: Get LPM requirements for Tiger Lake
  platform/x86: intel_pmc_core: Show LPM residency in microseconds
  platform/x86: intel_pmc_core: Handle sub-states generically
  platform/x86: intel_pmc_core: Remove global struct pmc_dev
  platform/x86: intel_pmc_core: Don't use global pmcdev in quirks
  platform/x86: intel_chtdc_ti_pwrbtn: Fix missing IRQF_ONESHOT as only threaded handler
  platform/x86: gigabyte-wmi: add X570 AORUS ELITE
  platform/x86: thinkpad_acpi: Add labels to the first 2 temperature sensors
  platform/x86: pmc_atom: Match all Beckhoff Automation baytrail boards with critclk_systems DMI table
  platform/x86: add Gigabyte WMI temperature driver
  ...

Commit d1f04410

 ("certs: Add ability to preload revocation certs")
created a new generated file for revocation certs, but didn't tell git
to ignore it.  Thus causing unnecessary "git status" noise after a
kernel build with CONFIG_SYSTEM_REVOCATION_LIST enabled.

Add the proper gitignore magic.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'hyperv-next-signed-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull Hyper-V updates from Wei Liu:

 - VMBus enhancement

 - Free page reporting support for Hyper-V balloon driver

 - Some patches for running Linux as Arm64 Hyper-V guest

 - A few misc clean-up patches

* tag 'hyperv-next-signed-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (30 commits)
  drivers: hv: Create a consistent pattern for checking Hyper-V hypercall status
  x86/hyperv: Move hv_do_rep_hypercall to asm-generic
  video: hyperv_fb: Add ratelimit on error message
  Drivers: hv: vmbus: Increase wait time for VMbus unload
  Drivers: hv: vmbus: Initialize unload_event statically
  Drivers: hv: vmbus: Check for pending channel interrupts before taking a CPU offline
  Drivers: hv: vmbus: Drivers: hv: vmbus: Introduce CHANNELMSG_MODIFYCHANNEL_RESPONSE
  Drivers: hv: vmbus: Introduce and negotiate VMBus protocol version 5.3
  Drivers: hv: vmbus: Use after free in __vmbus_open()
  Drivers: hv: vmbus: remove unused function
  Drivers: hv: vmbus: Remove unused linux/version.h header
  x86/hyperv: remove unused linux/version.h header
  x86/Hyper-V: Support for free page reporting
  x86/hyperv: Fix unused variable 'hi' warning in hv_apic_read
  x86/hyperv: Fix unused variable 'msr_val' warning in hv_qlock_wait
  hv: hyperv.h: a few mundane typo fixes
  drivers: hv: Fix EXPORT_SYMBOL and tab spaces issue
  Drivers: hv: vmbus: Drop error message when 'No request id available'
  asm-generic/hyperv: Add missing function prototypes per -W1 warnings
  clocksource/drivers/hyper-v: Move handling of STIMER0 interrupts
  ...

Pull xen updates from Juergen Gross:

 - remove some PV ACPI cpu/memory hotplug code which has been broken for
   a long time

 - support direct mapped guests (other than dom0) on Arm

 - several small fixes and cleanups

* tag 'for-linus-5.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/arm: introduce XENFEAT_direct_mapped and XENFEAT_not_direct_mapped
  xen-pciback: simplify vpci's find hook
  xen-blkfront: Fix 'physical' typos
  xen-blkback: fix compatibility bug with single page rings
  xen: Remove support for PV ACPI cpu/memory hotplug
  xen/pciback: Fix incorrect type warnings

Pull arm64 updates from Catalin Marinas:

 - MTE asynchronous support for KASan. Previously only synchronous
   (slower) mode was supported. Asynchronous is faster but does not
   allow precise identification of the illegal access.

 - Run kernel mode SIMD with softirqs disabled. This allows using NEON
   in softirq context for crypto performance improvements. The
   conditional yield support is modified to take softirqs into account
   and reduce the latency.

 - Preparatory patches for Apple M1: handle CPUs that only have the VHE
   mode available (host kernel running at EL2), add FIQ support.

 - arm64 perf updates: support for HiSilicon PA and SLLC PMU drivers,
   new functions for the HiSilicon HHA and L3C PMU, cleanups.

 - Re-introduce support for execute-only user permissions but only when
   the EPAN (Enhanced Privileged Access Never) architecture feature is
   available.

 - Disable fine-grained traps at boot and improve the documented boot
   requirements.

 - Support CONFIG_KASAN_VMALLOC on arm64 (only with KASAN_GENERIC).

 - Add hierarchical eXecute Never permissions for all page tables.

 - Add arm64 prctl(PR_PAC_{SET,GET}_ENABLED_KEYS) allowing user programs
   to control which PAC keys are enabled in a particular task.

 - arm64 kselftests for BTI and some improvements to the MTE tests.

 - Minor improvements to the compat vdso and sigpage.

 - Miscellaneous cleanups.

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (86 commits)
  arm64/sve: Add compile time checks for SVE hooks in generic functions
  arm64/kernel/probes: Use BUG_ON instead of if condition followed by BUG.
  arm64: pac: Optimize kernel entry/exit key installation code paths
  arm64: Introduce prctl(PR_PAC_{SET,GET}_ENABLED_KEYS)
  arm64: mte: make the per-task SCTLR_EL1 field usable elsewhere
  arm64/sve: Remove redundant system_supports_sve() tests
  arm64: fpsimd: run kernel mode NEON with softirqs disabled
  arm64: assembler: introduce wxN aliases for wN registers
  arm64: assembler: remove conditional NEON yield macros
  kasan, arm64: tests supports for HW_TAGS async mode
  arm64: mte: Report async tag faults before suspend
  arm64: mte: Enable async tag check fault
  arm64: mte: Conditionally compile mte_enable_kernel_*()
  arm64: mte: Enable TCO in functions that can read beyond buffer limits
  kasan: Add report for async mode
  arm64: mte: Drop arch_enable_tagging()
  kasan: Add KASAN mode kernel parameter
  arm64: mte: Add asynchronous mode support
  arm64: Get rid of CONFIG_ARM64_VHE
  arm64: Cope with CPUs stuck in VHE mode
  ...

Pull m68k updates from Geert Uytterhoeven:

 - defconfig updates

 - Use common scripts for syscall table and header generation

 - Fix timers on MVME platforms

 - Fix lock imbalance in cacheflush syscall

 - Minor fixes and improvements

* tag 'm68k-for-v5.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: sun3x: Remove unneeded semicolon
  m68k: Add missing mmap_read_lock() to sys_cacheflush()
  m68k: fpsp040,ifpsp060: Remove meaningless EXTRA_LDFLAGS
  m68k: fpsp040: Remove meaningless $(OS_OBJS)
  m68k: mvme147,mvme16x: Don't wipe PCC timer config bits
  m68k: syscalls: switch to generic syscallhdr.sh
  m68k: syscalls: switch to generic syscalltbl.sh
  m68k: defconfig: Update defconfigs for v5.12-rc1
  m68k: mm: Fix flatmem memory model setup

Pull x86 vdso update from Thomas Gleixner:
 "A single fix for the x86 VDSO build infrastructure to address a
  compiler warning on 32bit hosts due to a fprintf() modifier/argument
  mismatch."

* tag 'x86-vdso-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso: Use proper modifier for len's format specifier in extract()

Pull x86 bus lock detection updates from Thomas Gleixner:
 "Support for enhanced split lock detection:

  Newer CPUs provide a second mechanism to detect operations with lock
  prefix which go accross a cache line boundary. Such operations have to
  take bus lock which causes a system wide performance degradation when
  these operations happen frequently.

  The new mechanism is not using the #AC exception. It triggers #DB and
  is restricted to operations in user space. Kernel side split lock
  access can only be detected by the #AC based variant.

  Contrary to the #AC based mechanism the #DB based variant triggers
  _after_ the instruction was executed. The mechanism is CPUID
  enumerated and contrary to the #AC version which is based on the magic
  TEST_CTRL_MSR and model/family based enumeration on the way to become
  architectural"

* tag 'x86-splitlock-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation/admin-guide: Change doc for split_lock_detect parameter
  x86/traps: Handle #DB for bus lock
  x86/cpufeatures: Enumerate #DB for bus lock detection

Pull entry code update from Thomas Gleixner:
 "Provide support for randomized stack offsets per syscall to make
  stack-based attacks harder which rely on the deterministic stack
  layout.

  The feature is based on the original idea of PaX's RANDSTACK feature,
  but uses a significantly different implementation.

  The offset does not affect the pt_regs location on the task stack as
  this was agreed on to be of dubious value. The offset is applied
  before the actual syscall is invoked.

  The offset is stored per cpu and the randomization happens at the end
  of the syscall which is less predictable than on syscall entry.

  The mechanism to apply the offset is via alloca(), i.e. abusing the
  dispised VLAs. This comes with the drawback that
  stack-clash-protection has to be disabled for the affected compilation
  units and there is also a negative interaction with stack-protector.

  Those downsides are traded with the advantage that this approach does
  not require any intrusive changes to the low level assembly entry
  code, does not affect the unwinder and the correct stack alignment is
  handled automatically by the compiler.

  The feature is guarded with a static branch which avoids the overhead
  when disabled.

  Currently this is supported for X86 and ARM64"

* tag 'x86-entry-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  arm64: entry: Enable random_kstack_offset support
  lkdtm: Add REPORT_STACK for checking stack offsets
  x86/entry: Enable random_kstack_offset support
  stack: Optionally randomize kernel stack offset each syscall
  init_on_alloc: Optimize static branches
  jump_label: Provide CONFIG-driven build state defaults

Pull x86 apic update from Thomas Gleixner:
 "A single commit to make the vector allocation code more resilent
  against an accidental allocation attempt for IRQ2"

* tag 'x86-apic-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vector: Add a sanity check to prevent IRQ2 allocations

Pull timer updates from Thomas Gleixner:
 "The time and timers updates contain:

  Core changes:

   - Allow runtime power management when the clocksource is changed.

   - A correctness fix for clock_adjtime32() so that the return value on
     success is not overwritten by the result of the copy to user.

   - Allow late installment of broadcast clockevent devices which was
     broken because nothing switched them over to oneshot mode. This
     went unnoticed so far because clockevent devices used to be built
     in, but now people started to make them modular.

   - Debugfs related simplifications

   - Small cleanups and improvements here and there

  Driver changes:

   - The usual set of device tree binding updates for a wide range of
     drivers/devices.

   - The usual updates and improvements for drivers all over the place
     but nothing outstanding.

   - No new clocksource/event drivers. They'll come back next time"

* tag 'timers-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  posix-timers: Preserve return value in clock_adjtime32()
  tick/broadcast: Allow late registered device to enter oneshot mode
  tick: Use tick_check_replacement() instead of open coding it
  time/timecounter: Mark 1st argument of timecounter_cyc2time() as const
  dt-bindings: timer: nuvoton,npcm7xx: Add wpcm450-timer
  clocksource/drivers/arm_arch_timer: Add __ro_after_init and __init
  clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940
  clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue
  clocksource/drivers/dw_apb_timer_of: Add handling for potential memory leak
  clocksource/drivers/npcm: Add support for WPCM450
  clocksource/drivers/sh_cmt: Don't use CMTOUT_IE with R-Car Gen2/3
  clocksource/drivers/pistachio: Fix trivial typo
  clocksource/drivers/ingenic_ost: Fix return value check in ingenic_ost_probe()
  clocksource/drivers/timer-ti-dm: Add missing set_state_oneshot_stopped
  clocksource/drivers/timer-ti-dm: Fix posted mode status check order
  dt-bindings: timer: renesas,cmt: Document R8A77961
  dt-bindings: timer: renesas,cmt: Add r8a779a0 CMT support
  clocksource/drivers/ingenic-ost: Add support for the JZ4760B
  clocksource/drivers/ingenic: Add support for the JZ4760
  dt-bindings: timer: ingenic: Add compatible strings for JZ4760(B)
  ...

Pull irq updates from Thomas Gleixner:
 "The usual updates from the irq departement:

  Core changes:

   - Provide IRQF_NO_AUTOEN as a flag for request*_irq() so drivers can
     be cleaned up which either use a seperate mechanism to prevent
     auto-enable at request time or have a racy mechanism which disables
     the interrupt right after request.

   - Get rid of the last usage of irq_create_identity_mapping() and
     remove the interface.

   - An overhaul of tasklet_disable().

     Most usage sites of tasklet_disable() are in task context and
     usually in cleanup, teardown code pathes. tasklet_disable()
     spinwaits for a tasklet which is currently executed. That's not
     only a problem for PREEMPT_RT where this can lead to a live lock
     when the disabling task preempts the softirq thread. It's also
     problematic in context of virtualization when the vCPU which runs
     the tasklet is scheduled out and the disabling code has to spin
     wait until it's scheduled back in.

     There are a few code pathes which invoke tasklet_disable() from
     non-sleepable context. For these a new disable variant which still
     spinwaits is provided which allows to switch tasklet_disable() to a
     sleep wait mechanism. For the atomic use cases this does not solve
     the live lock issue on PREEMPT_RT. That is mitigated by blocking on
     the RT specific softirq lock.

   - The PREEMPT_RT specific implementation of softirq processing and
     local_bh_disable/enable().

     On RT enabled kernels soft interrupt processing happens always in
     task context and all interrupt handlers, which are not explicitly
     marked to be invoked in hard interrupt context are forced into task
     context as well. This allows to protect against softirq processing
     with a per CPU lock, which in turn allows to make BH disabled
     regions preemptible.

     Most of the softirq handling code is still shared. The RT/non-RT
     specific differences are addressed with a set of inline functions
     which provide the context specific functionality. The
     local_bh_disable() / local_bh_enable() mechanism are obviously
     seperate.

   - The usual set of small improvements and cleanups

  Driver changes:

   - New drivers for Nuvoton WPCM450 and DT 79rc3243x interrupt
     controllers

   - Extended functionality for MStar, STM32 and SC7280 irq chips

   - Enhanced robustness for ARM GICv3/4.1 drivers

   - The usual set of cleanups and improvements all over the place"

* tag 'irq-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
  irqchip/xilinx: Expose Kconfig option for Zynq/ZynqMP
  irqchip/gic-v3: Do not enable irqs when handling spurious interrups
  dt-bindings: interrupt-controller: Add IDT 79RC3243x Interrupt Controller
  irqchip: Add support for IDT 79rc3243x interrupt controller
  irqdomain: Drop references to recusive irqdomain setup
  irqdomain: Get rid of irq_create_strict_mappings()
  irqchip/jcore-aic: Kill use of irq_create_strict_mappings()
  ARM: PXA: Kill use of irq_create_strict_mappings()
  irqchip/gic-v4.1: Disable vSGI upon (GIC CPUIF < v4.1) detection
  irqchip/tb10x: Use 'fallthrough' to eliminate a warning
  genirq: Reduce irqdebug cacheline bouncing
  kernel: Initialize cpumask before parsing
  irqchip/wpcm450: Drop COMPILE_TEST
  irqchip/irq-mst: Support polarity configuration
  irqchip: Add driver for WPCM450 interrupt controller
  dt-bindings: interrupt-controller: Add nuvoton, wpcm450-aic
  dt-bindings: qcom,pdc: Add compatible for sc7280
  irqchip/stm32: Add usart instances exti direct event support
  irqchip/gic-v3: Fix OF_BAD_ADDR error handling
  irqchip/sifive-plic: Mark two global variables __ro_after_init
  ...

Pull core entry updates from Thomas Gleixner:
 "A trivial cleanup of typo fixes"

* tag 'core-entry-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  entry: Fix typos in comments

Pull x86 platform updates from Borislav Petkov:
 "A bunch of SGI UV improvements, fixes and cleanups"

* tag 'x86_platform_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/uv: Remove dead !CONFIG_KEXEC_CORE code
  x86/platform/uv: Fix !KEXEC build failure
  x86/platform/uv: Add more to secondary CPU kdump info
  x86/platform/uv: Use x2apic enabled bit as set by BIOS to indicate APIC mode
  x86/platform/uv: Set section block size for hubless architectures
  x86/platform/uv: Fix indentation warning in Documentation/ABI/testing/sysfs-firmware-sgi_uv

Pull x86 build updates from Borislav Petkov:
 "A bunch of clang build fixes and a Kconfig highmem selection fix for
  486SX"

* tag 'x86_build_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Disable HIGHMEM64G selection for M486SX
  efi/libstub: Add $(CLANG_FLAGS) to x86 flags
  x86/boot: Add $(CLANG_FLAGS) to compressed KBUILD_CFLAGS
  x86/build: Propagate $(CLANG_FLAGS) to $(REALMODE_FLAGS)

Pull misc x86 cleanups from Borislav Petkov:
 "Trivial cleanups and fixes all over the place"

* tag 'x86_cleanups_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  MAINTAINERS: Remove me from IDE/ATAPI section
  x86/pat: Do not compile stubbed functions when X86_PAT is off
  x86/asm: Ensure asm/proto.h can be included stand-alone
  x86/platform/intel/quark: Fix incorrect kernel-doc comment syntax in files
  x86/msr: Make locally used functions static
  x86/cacheinfo: Remove unneeded dead-store initialization
  x86/process/64: Move cpu_current_top_of_stack out of TSS
  tools/turbostat: Unmark non-kernel-doc comment
  x86/syscalls: Fix -Wmissing-prototypes warnings from COND_SYSCALL()
  x86/fpu/math-emu: Fix function cast warning
  x86/msr: Fix wr/rdmsr_safe_regs_on_cpu() prototypes
  x86: Fix various typos in comments, take #2
  x86: Remove unusual Unicode characters from comments
  x86/kaslr: Return boolean values from a function returning bool
  x86: Fix various typos in comments
  x86/setup: Remove unused RESERVE_BRK_ARRAY()
  stacktrace: Move documentation for arch_stack_walk_reliable() to header
  x86: Remove duplicate TSC DEADLINE MSR definitions