Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

  LD      arch/mips/pci/built-in.o
WARNING: arch/mips/pci/built-in.o(.devinit.text+0x2a0): Section mismatch in reference from the function malta_piix_func0_fixup() to the variable .init.data:pci_irq
The function __devinit malta_piix_func0_fixup() references
a variable __initdata pci_irq.
If pci_irq is only used by malta_piix_func0_fixup then
annotate pci_irq with a matching annotation.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Originally added in 05b541489c48e7fbeec19a92acf8683230750d0a [Merge with
Linux 2.5.5.] over 10 years ago but never been used.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The PB1100/1500 are similar to their DB-cousins but with a few
more devices on the bus.

This patch adds PB1100/1500 support to the existing DB1100/1500
code.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: lnux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4338/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The PB1550 is more or less a DB1550 without the PCI IDE controller,
a more complicated (read: configurable) Flash setup and some other
minor changes.  Like the DB1550 it can be automatically detected by
reading the CPLD ID register bits.

This patch adds PB1550 detection and setup to the DB1550 code.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4337/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Combine support for the DB1200/PB1200, DB1300 and DB1550 boards into
a single kernel image.

defconfig-generated image verified on DB1200, DB1300 and DB1550.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4335/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

We don't have to do a separate shift to eliminate the software bits,
just rotate them into the fill and they will be ignored.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4294/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The number of %s was just getting ridiculous.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Most supported systems currently hardwire cpu_has_dsp to 0, so we also
can disable support for cpu_has_dsp2 resulting in a slightly smaller
kernel.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[ralf@linux-mips.org: This patch really only detects the ASE and passes its
existence on to userland via /proc/cpuinfo.  The DSP ASE Rev 2. adds new
resources but no resources that would need management by the kernel.]

Signed-off-by: Steven J. Hill <sjhill@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4165/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

On a dual issue processor GCC generates code that saves a couple of
clock cycles per loop if we rearrange things slightly.  Checking for
p != end saves a SLTU per loop, moving the increment to the middle can
let it dual issue on multi-issue processors.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4249/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add hardware performance counter support to kernel "perf" code for
BMIPS5000. The BMIPS5000 performance counters are similar to MIPS
MTI cores, so the changes were mostly made in perf_event_mipsxx.c
which is typically for MTI cores.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/4109/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Split the Kconfig option CONFIG_MIPS_MT_SMP into CONFIG_MIPS_MT_SMP
and CONFIG_MIPS_PERF_SHARED_TC_COUNTERS so some of the code used
for performance counters that are shared between threads can be used
for MIPS cores that are not MT_SMP.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/4108/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The #ifdef for CONFIG_HW_PERF_EVENTS is not needed because the
Makefile will only compile the module if this config option is set.
This means that the code under #else would never be compiled. This
may have been done to leave the original broken code around for
reference, but the FIXME comment above the code already shows the
broken code.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/4107/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The PCI (Program Counter Interrupt) bit in the "cause" register
is mandatory for MIPS32R2 cores, but has also been added to some R1
cores (BMIPS5000). This change adds a cpu feature bit to make it
easier to check for and use this feature.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/4106/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Change the indicator from 0xffffffff in the "event_id" member to
zero in the "cntr_mask" member. This removes the need to initialize
entries that are unsupported. This also solves a problem where the
number of entries in the table was increased based on a globel enum
used for all platforms, but the new unsupported entries were not added
for mips. This was leaving new table entries of all zeros that we not
marked UNSUPPORTED.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/4110/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

We can save an instruction in the TLB Refill path for kernel mappings
by aligning swapper_pg_dir on a 64K boundary.  The address of
swapper_pg_dir can be generated with a single LUI instead of
LUI/{D}ADDUI.

The alignment of __init_end is bumped up to 64K so there are no holes
between it and swapper_pg_dir, which is placed at the very beginning
of .bss.

The alignment of invalid_pmd_table and invalid_pte_table can be
relaxed to PAGE_SIZE.  We do this by using __page_aligned_bss, which
has the added benefit of eliminating alignment holes in .bss.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-arch@vger.kernel.org,
Cc: linux-kernel@vger.kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Patchwork: https://patchwork.linux-mips.org/patch/4220/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Follow-on MIPS patch will put an object here that needs 64K alignment
to minimize padding.

For those architectures that don't define BSS_FIRST_SECTIONS, there is
no change.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-arch@vger.kernel.org,
Cc: linux-kernel@vger.kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Patchwork: https://patchwork.linux-mips.org/patch/4221/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

I've maintained this patch, originally from Thiemo Seufer in 2004, for a
really long time, but I think it's time for it to get a look at for
possible inclusion.  I have had no problems with it across various SGI
systems over the years.

To quote the post here:
http://www.linux-mips.org/archives/linux-mips/2004-12/msg00000.html



"the atomic functions use so far memory references for the inline
assembler to access the semaphore. This can lead to additional
instructions in the ll/sc loop, because newer compilers don't
expand the memory reference any more but leave it to the assembler.

The appended patch uses registers instead, and makes the ll/sc
arguments more explicit. In some cases it will lead also to better
register scheduling because the register isn't bound to an output
any more."

Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4029/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Pull i2c-embedded changes from Wolfram Sang:
 "The changes for i2c-embedded include:

   - massive rework of the omap driver
   - massive rework of the at91 driver.  In fact, the old driver gets
     removed; I am okay with this approach since the old driver was
     depending on BROKEN and its limitations made it practically
     unusable, so people used bitbanging instead.  But even if there are
     users, there is no platform_data or module parameter which would
     need to be converted.  It is just another driver doing I2C
     transfers, just way better.  Modifications of arch/arm/at91 related
     files have proper acks from the maintainer.
   - new driver for R-Car I2C
   - devicetree and generic_clock conversions and fixes
   - usual driver fixes and changes.

  The rework patches have come a long way and lots of people have been
  involved in creating/testing them.  Most patches have been in
  linux-next at least since 3.6-rc5.  A few have been added in the last
  week, I have to admit.

  An unexpected (but welcome :)) peak in private life is the cause for
  that.  The "late" patches shouldn't cause any merge conflicts and I
  will have a special eye on them during the stabilization phase.  This
  is an exception and I want to have the patches in place properly in
  time again for the next kernels."

* 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (44 commits)
  MXS: Implement DMA support into mxs-i2c
  i2c: add Renesas R-Car I2C driver
  i2c: s3c2410: use clk_prepare_enable and clk_disable_unprepare
  ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints
  i2c: nomadik: Add Device Tree support to the Nomadik I2C driver
  i2c: algo: pca: Fix chip reset function for PCA9665
  i2c: mpc: Wait for STOP to hit the bus
  i2c: davinci: preparation for switch to common clock framework
  omap-i2c: fix incorrect log message when using a device tree
  i2c: omap: sanitize exit path
  i2c: omap: switch over to autosuspend API
  i2c: omap: remove unnecessary pm_runtime_suspended check
  i2c: omap: switch to threaded IRQ support
  i2c: omap: remove redundant status read
  i2c: omap: get rid of the "complete" label
  i2c: omap: resize fifos before each message
  i2c: omap: simplify IRQ exit path
  i2c: omap: always return IRQ_HANDLED
  i2c: omap: simplify errata check
  i2c: omap: bus: add a receiver flag
  ...

Pull ARM SoC fixes from Olof Johansson:
 "A series of fixes (and in some cases, some cleanups):

  Via Tony Lindgren:
   - A collection of OMAP regression fixes, in particular because
     firmware no longer sets up all pin states before starting the
     kernel.
   - cpufreq fixes for OMAP (Rafael is on vacation and this was
     pre-agreed).
   - A longer series of misc regression fixes and cleanups, warning
     removals, etc for OMAP

  From Arnd Bergmann:
   - A series of warning fixes for various platforms (defconfig builds)

  Misc:
   - A couple of tegra fixes, one for i.MX, some vt8500 fixes, etc."

* tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
  ARM: pxa: armcore: fix PCI PIO warnings
  ARM: integrator: use __iomem pointers for MMIO, part 2
  ARM: assabet: fix bogus warning in get_assabet_scr (again)
  ARM: shmobile: mark shmobile_init_late as __init
  ARM: integrator_cp: fix build failure
  ARM: OMAP4/AM335x: hwmod: fix disable_module regression in hardreset handling
  ARM: OMAP3: fix workaround for EMU clockdomain
  arm/omap: Replace board_ref_clock with enum values
  ARM: OMAP2+: remove duplicated include from board-omap3stalker.c
  arch/arm/plat-omap/omap-pm-noop.c: Remove unecessary semicolon
  arch/arm/mach-omap2: Remove unecessary semicolon
  arch/arm/mach-omap1/devices.c: Remove unecessary semicolon
  ARM/dts: omap5-evm: pinmux configuration for audio
  ARM/dts: Add pinctrl driver entries for omap5
  ARM/dts: omap4-panda: pinmux configuration for audio
  ARM/dts: omap4-sdp: pinmux configuration for audio
  ARM/dts: omap5-evm: Disable unused McBSP3
  ARM/dts: omap4-sdp: Disable unused McBSP3
  ARM/dts: omap4-panda: Disable unused audio IPs
  ARM: OMAP: board-omap4panda: Pin mux configuration for audio needs
  ...

In autofs4_d_automount(), if a mount fail occurs the AUTOFS_INF_PENDING
mount pending flag is not cleared.

One effect of this is when using the "browse" option, directory entry
attributes show up with all "?"s due to the incorrect callback and
subsequent failure return (when in fact no callback should be made).

Signed-off-by: Ian Kent <ikent@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge misc fixes from Andrew Morton:
 "Followups, fixes and some random stuff I found on the internet."

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (11 patches)
  perf: fix duplicate header inclusion
  memcg, kmem: fix build error when CONFIG_INET is disabled
  rtc: kconfig: fix RTC_INTF defaults connected to RTC_CLASS
  rapidio: fix comment
  lib/kasprintf.c: use kmalloc_track_caller() to get accurate traces for kvasprintf
  rapidio: update for destination ID allocation
  rapidio: update asynchronous discovery initialization
  rapidio: use msleep in discovery wait
  mm: compaction: fix bit ranges in {get,clear,set}_pageblock_skip()
  arch/powerpc/platforms/pseries/hotplug-memory.c: section removal cleanups
  arch/powerpc/platforms/pseries/hotplug-memory.c: fix section handling code

Pull block IO update from Jens Axboe:
 "Core block IO bits for 3.7.  Not a huge round this time, it contains:

   - First series from Kent cleaning up and generalizing bio allocation
     and freeing.

   - WRITE_SAME support from Martin.

   - Mikulas patches to prevent O_DIRECT crashes when someone changes
     the block size of a device.

   - Make bio_split() work on data-less bio's (like trim/discards).

   - A few other minor fixups."

Fixed up silent semantic mis-merge as per Mikulas Patocka and Andrew
Morton.  It is due to the VM no longer using a prio-tree (see commit
6b2dbba8: "mm: replace vma prio_tree with an interval tree").

So make set_blocksize() use mapping_mapped() instead of open-coding the
internal VM knowledge that has changed.

* 'for-3.7/core' of git://git.kernel.dk/linux-block: (26 commits)
  block: makes bio_split support bio without data
  scatterlist: refactor the sg_nents
  scatterlist: add sg_nents
  fs: fix include/percpu-rwsem.h export error
  percpu-rw-semaphore: fix documentation typos
  fs/block_dev.c:1644:5: sparse: symbol 'blkdev_mmap' was not declared
  blockdev: turn a rw semaphore into a percpu rw semaphore
  Fix a crash when block device is read and block size is changed at the same time
  block: fix request_queue->flags initialization
  block: lift the initial queue bypass mode on blk_register_queue() instead of blk_init_allocated_queue()
  block: ioctl to zero block ranges
  block: Make blkdev_issue_zeroout use WRITE SAME
  block: Implement support for WRITE SAME
  block: Consolidate command flag and queue limit checks for merges
  block: Clean up special command handling logic
  block/blk-tag.c: Remove useless kfree
  block: remove the duplicated setting for congestion_threshold
  block: reject invalid queue attribute values
  block: Add bio_clone_bioset(), bio_clone_kmalloc()
  block: Consolidate bio_alloc_bioset(), bio_kmalloc()
  ...

Pull a firewire fix from Stefan Richter:
 "Fixes an old bug of the /dev/fw* ioctl ABI."

* tag 'firewire-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: cdev: fix user memory corruption (i386 userland on amd64 kernel)

Pull vfio fixes from Alex Williamson:
 "This includes a fix for PCI BAR mmaps after recent mm changes, fixing
  an interrupt race, and fixing a consistency bug in interrupt state
  when switching interrupt modes."

* tag 'vfio-for-v3.7-rc1' of git://github.com/awilliam/linux-vfio:
  vfio: Fix PCI INTx disable consistency
  vfio: Move PCI INTx eventfd setting earlier
  vfio: Fix PCI mmap after b3b9c293

#include <stdbool.h> somehow got duplicated on its way to linus's tree
(probably as a conflict resolution as things got sent through multiple
trees)

Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit e1aab161

 ("socket: initial cgroup code.") causes a build
error when CONFIG_INET is disabled in Linus' tree:

  net/built-in.o: In function `sk_update_clone':
  net/core/sock.c:1336: undefined reference to `sock_update_memcg'

sock_update_memcg() is only defined when CONFIG_INET is enabled, so fix
it by defining the dummy function without this option.

Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 6b8029fa

 ("rtc: kconfig: remove unnecessary dependencies")
removed various 'depends on RTC_CLASS' dependencies but also removed a
few 'default RTC_CLASS' statements, which actually changed default
behavior.

This resulted in the various RTC interfaces (sysfs, proc, dev) all being
disabled by default, even when RTC_CLASS is enabled:

   # CONFIG_RTC_INTF_SYSFS is not set
   # CONFIG_RTC_INTF_PROC is not set
   # CONFIG_RTC_INTF_DEV is not set

which is different from previous behavior (all of these where enabled.)

To fix, add back the 'default RTC_CLASS' statments to each of the
RTC_INTF_* options.

I noticed this because some RTC tests started failing on my TI OMAP
platforms because /dev/rtc0 was not present anymore, even though the
driver was present and RTC_CLASS was enabled.

Signed-off-by: Kevin Hilman <khilman@ti.com>
Acked-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The resource index for the mailboxes was incorrect.

Signed-off-by: Chad Reese <kreese@caviumnetworks.com>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Previously kvasprintf() allocation was being done through kmalloc(),
thus producing an inaccurate trace report.

This is a common problem: in order to get accurate callsite tracing, a
lib/utils function shouldn't allocate kmalloc but instead use
kmalloc_track_caller.

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Address comments provided by Andrew Morton:
https://lkml.org/lkml/2012/10/3/550



 - Keeps consistent kerneldoc compatible comments style for new static
   functions.
 - Removes unnecessary complexity from destination ID allocation
   routine.
 - Uses kcalloc() for code clarity.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Update discovery process initialization based on Andrew Morton's comments:
https://lkml.org/lkml/2012/10/3/552

.

This update processes all enumerating mports first and schedules discovery
work after that. If the initialization routine fails to allocate resources
needed to execute discovery, it abandons discovery for all ports.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use msleep() for code clarity as suggested by Andrew Morton in his
comments for the original patch: https://lkml.org/lkml/2012/10/3/546

.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

{get,clear,set}_pageblock_skip() use incorrect bit ranges (please compare
to bit ranges used by {get,set}_pageblock_flags() used for migration
types) and can overwrite pageblock migratetype of the next pageblock in
the bitmap.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Followups to d760afd4

 ("memory-hotplug: suppress "Trying to free
nonexistent resource <XXXXXXXXXXXXXXXX-YYYYYYYYYYYYYYYY>" warning").

 - use unsigned long type, as overflows are conceivable

 - rename `i' to the less-misleading and more informative `section'

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix

  arch/powerpc/platforms/pseries/hotplug-memory.c: In function 'pseries_remove_memblock':
  arch/powerpc/platforms/pseries/hotplug-memory.c:103:17: error: unused variable 'pfn' [-Werror=unused-variable]

Caused by commit d760afd4

 ("memory-hotplug: suppress "Trying to free
nonexistent resource <XXXXXXXXXXXXXXXX-YYYYYYYYYYYYYYYY>" warning").

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull hwmon updates from Jean Delvare:
 "Only trivial things this time"

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: Drop needless includes of <linux/delay.h>
  hwmon: Add missing inclusions of <linux/err.h>
  hwmon: Add missing inclusions of <linux/jiffies.h>
  hwmon: Fix spelling of Celsius
  hwmon: Update Alexey Fisher's name

The virq_disabled flag tracks the userspace view of INTx masking
across interrupt mode changes, but we're not consistently applying
this to the interrupt and masking handler notion of the device.
Currently if the user sets DisINTx while in MSI or MSIX mode, then
returns to INTx mode (ex. rebooting a qemu guest), the hardware has
DisINTx+, but the management of INTx thinks it's enabled, making it
impossible to actually clear DisINTx.  Fix this by updating the
handler state when INTx is re-enabled.

Cc: stable@vger.kernel.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>