- Apr 17, 2024
-
-
Chuanhong Guo authored
Fibocom FM650/FG650 are 5G modems with ECM/NCM/RNDIS/MBIM modes. This patch adds support to all 4 modes. In all 4 modes, the first serial port is the AT console while the other 3 appear to be diagnostic interfaces for dumping modem logs. usb-devices output for all modes: ECM: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=0a04 Rev=04.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=FG650 Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=504mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms NCM: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=0a05 Rev=04.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=FG650 Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms RNDIS: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=0a06 Rev=04.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=FG650 Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA I: If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms MBIM: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=0a07 Rev=04.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=FG650 Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by:
Chuanhong Guo <gch981213@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org>
-
- Apr 15, 2024
-
-
Jerry Meng authored
EM060K_129, EM060K_12a, EM060K_12b and EM0060K_12c are EM060K's sub-models, having the same name "Quectel EM060K-GL" and the same interface layout. MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0129 Rev= 5.04 S: Manufacturer=Quectel S: Product=Quectel EM060K-GL S: SerialNumber=f6fa08b6 C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
Jerry Meng <jerry-meng@foxmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org>
-
bolan wang authored
Update the USB serial option driver support for the Fibocom FM135-GL LTE modules. - VID:PID 2cb7:0115, FM135-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x0115: mbim, diag, at, pipe Here are the outputs of usb-devices: T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0115 Rev=05.15 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom Module S: SerialNumber=12345678 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
bolan wang <bolan.wang@fibocom.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org>
-
- Apr 01, 2024
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Deduplicate Kconfig entries for CONFIG_CXL_PMU - Fix unselectable choice entry in MIPS Kconfig, and forbid this structure - Remove unused include/asm-generic/export.h - Fix a NULL pointer dereference bug in modpost - Enable -Woverride-init warning consistently with W=1 - Drop KCSAN flags from *.mod.c files * tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: Fix typo HEIGTH to HEIGHT Documentation/llvm: Note s390 LLVM=1 support with LLVM 18.1.0 and newer kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries kbuild: make -Woverride-init warnings more consistent modpost: do not make find_tosym() return NULL export.h: remove include/asm-generic/export.h kconfig: do not reparent the menu inside a choice block MIPS: move unselectable FIT_IMAGE_FDT_EPM5 out of the "System type" choice cxl: remove CONFIG_CXL_PMU entry in drivers/cxl/Kconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull EDAC fixes from Borislav Petkov: - Fix more issues in the AMD FMPM driver * tag 'edac_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: RAS: Avoid build errors when CONFIG_DEBUG_FS=n RAS/AMD/FMPM: Safely handle saved records of various sizes RAS/AMD/FMPM: Avoid NULL ptr deref in get_saved_records()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Borislav Petkov: - Fix an unused function warning on irqchip/irq-armada-370-xp - Fix the IRQ sharing with pinctrl-amd and ACPI OSL * tag 'irq_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/armada-370-xp: Suppress unused-function warning genirq: Introduce IRQF_COND_ONESHOT and use it in pinctrl-amd
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 perf fixes from Borislav Petkov: - Define the correct set of default hw events on AMD Zen4 - Use the correct stalled cycles PMCs on AMD Zen2 and newer - Fix detection of the LBR freeze feature on AMD * tag 'perf_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd/core: Define a proper ref-cycles event for Zen 4 and later perf/x86/amd/core: Update and fix stalled-cycles-* events for Zen 2 and later perf/x86/amd/lbr: Use freeze based on availability x86/cpufeatures: Add new word for scattered features
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timers update from Borislav Petkov: - Volunteer in Anna-Maria and Frederic as timers co-maintainers so that tglx can relax more :-P * tag 'timers_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Add co-maintainers for time[rs]
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fix from Borislav Petkov: - Fix a format specifier build error in objtool during an x32 build * tag 'objtool_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix compile failure when using the x32 compiler
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Make sure single object builds in arch/x86/virt/ ala make ... arch/x86/virt/vmx/tdx/seamcall.o work again - Do not do ROM range scans and memory validation when the kernel is running as a SEV-SNP guest as those can get problematic and, before that, are not really needed in such a guest - Exclude the build-time generated vdso-image-x32.o object from objtool validation and in particular the return sites in there due to a warning which fires when an unpatched return thunk is being used - Improve the NMI CPUs stall message to show additional information about the state of each CPU wrt the NMI handler - Enable gcc named address spaces support only on !KCSAN configs due to compiler options incompatibility - Revert a change which was trying to use GB pages for mapping regions only when the regions would be large enough but that change lead to kexec failing - A documentation fixlet * tag 'x86_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build: Use obj-y to descend into arch/x86/virt/ x86/sev: Skip ROM range scans and validation for SEV-SNP guests x86/vdso: Fix rethunk patching for vdso-image-x32.o too x86/nmi: Upgrade NMI backtrace stall checks & messages x86/percpu: Disable named address spaces for KCSAN Revert "x86/mm/ident_map: Use gbpages only where full GB page should be mapped." Documentation/x86: Fix title underline length
-
- Mar 31, 2024
-
-
Isak Ellmer authored
Fixed a typo in some variables where height was misspelled as heigth. Signed-off-by:
Isak Ellmer <isak01@gmail.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
Nathan Chancellor authored
As of the first s390 pull request during the 6.9 merge window, commit 691632f0 ("Merge tag 's390-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux"), s390 can be built with LLVM=1 when using LLVM 18.1.0, which is the first version that has SystemZ support implemented in ld.lld and llvm-objcopy. Update the supported architectures table in the Kbuild LLVM documentation to note this explicitly to make it more discoverable by users and other developers. Additionally, this brings s390 in line with the rest of the architectures in the table, which all support LLVM=1. Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
Borislav Petkov (AMD) authored
When KCSAN and CONSTRUCTORS are enabled, one can trigger the "Unpatched return thunk in use. This should not happen!" catch-all warning. Usually, when objtool runs on the .o objects, it does generate a section .return_sites which contains all offsets in the objects to the return thunks of the functions present there. Those return thunks then get patched at runtime by the alternatives. KCSAN and CONSTRUCTORS add this to the object file's .text.startup section: ------------------- Disassembly of section .text.startup: ... 0000000000000010 <_sub_I_00099_0>: 10: f3 0f 1e fa endbr64 14: e8 00 00 00 00 call 19 <_sub_I_00099_0+0x9> 15: R_X86_64_PLT32 __tsan_init-0x4 19: e9 00 00 00 00 jmp 1e <__UNIQUE_ID___addressable_cryptd_alloc_aead349+0x6> 1a: R_X86_64_PLT32 __x86_return_thunk-0x4 ------------------- which, if it is built as a module goes through the intermediary stage of creating a <module>.mod.c file which, when translated, receives a second constructor: ------------------- Disassembly of section .text.startup: 0000000000000010 <_sub_I_00099_0>: 10: f3 0f 1e fa endbr64 14: e8 00 00 00 00 call 19 <_sub_I_00099_0+0x9> 15: R_X86_64_PLT32 __tsan_init-0x4 19: e9 00 00 00 00 jmp 1e <_sub_I_00099_0+0xe> 1a: R_X86_64_PLT32 __x86_return_thunk-0x4 ... 0000000000000030 <_sub_I_00099_0>: 30: f3 0f 1e fa endbr64 34: e8 00 00 00 00 call 39 <_sub_I_00099_0+0x9> 35: R_X86_64_PLT32 __tsan_init-0x4 39: e9 00 00 00 00 jmp 3e <__ksymtab_cryptd_alloc_ahash+0x2> 3a: R_X86_64_PLT32 __x86_return_thunk-0x4 ------------------- in the .ko file. Objtool has run already so that second constructor's return thunk cannot be added to the .return_sites section and thus the return thunk remains unpatched and the warning rightfully fires. Drop KCSAN flags from the mod.c generation stage as those constructors do not contain data races one would be interested about. Debugged together with David Kaplan <David.Kaplan@amd.com> and Nikolay Borisov <nik.borisov@suse.com>. Reported-by:
Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://lore.kernel.org/r/0851a207-7143-417e-be31-8bf2b3afb57d@molgen.mpg.de Signed-off-by:
Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 Reviewed-by:
Nikolay Borisov <nik.borisov@suse.com> Reviewed-by:
Marco Elver <elver@google.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
Arnd Bergmann authored
The -Woverride-init warn about code that may be intentional or not, but the inintentional ones tend to be real bugs, so there is a bit of disagreement on whether this warning option should be enabled by default and we have multiple settings in scripts/Makefile.extrawarn as well as individual subsystems. Older versions of clang only supported -Wno-initializer-overrides with the same meaning as gcc's -Woverride-init, though all supported versions now work with both. Because of this difference, an earlier cleanup of mine accidentally turned the clang warning off for W=1 builds and only left it on for W=2, while it's still enabled for gcc with W=1. There is also one driver that only turns the warning off for newer versions of gcc but not other compilers, and some but not all the Makefiles still use a cc-disable-warning conditional that is no longer needed with supported compilers here. Address all of the above by removing the special cases for clang and always turning the warning off unconditionally where it got in the way, using the syntax that is supported by both compilers. Fixes: 2cd3271b ("kbuild: avoid duplicate warning options") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Acked-by:
Jani Nikula <jani.nikula@intel.com> Acked-by:
Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
Mikulas Patocka authored
When compiling the v6.9-rc1 kernel with the x32 compiler, the following errors are reported. The reason is that we take an "unsigned long" variable and print it using "PRIx64" format string. In file included from check.c:16: check.c: In function ‘add_dead_ends’: /usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:46:17: error: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 5 has type ‘long unsigned int’ [-Werror=format=] 46 | "%s: warning: objtool: " format "\n", \ | ^~~~~~~~~~~~~~~~~~~~~~~~ check.c:613:33: note: in expansion of macro ‘WARN’ 613 | WARN("can't find unreachable insn at %s+0x%" PRIx64, | ^~~~ ... Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: linux-kernel@vger.kernel.org
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Chandan Babu: - Allow stripe unit/width value passed via mount option to be written over existing values in the super block - Do not set current->journal_info to avoid its value from being miused by another filesystem context * tag 'xfs-6.9-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: don't use current->journal_info xfs: allow sunit mount option to repair bad primary sb stripe values
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes and updates from James Bottomley: "Fully half this pull is updates to lpfc and qla2xxx which got committed just as the merge window opened. A sizeable fraction of the driver updates are simple bug fixes (and lock reworks for bug fixes in the case of lpfc), so rather than splitting the few actual enhancements out, we're just adding the drivers to the -rc1 pull. The enhancements for lpfc are log message removals, copyright updates and three patches redefining types. For qla2xxx it's just removing a debug message on module removal and the manufacturer detail update. The two major fixes are the sg teardown race and a core error leg problem with the procfs directory not being removed if we destroy a created host that never got to the running state. The rest are minor fixes and constifications" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (41 commits) scsi: bnx2fc: Remove spin_lock_bh while releasing resources after upload scsi: core: Fix unremoved procfs host directory regression scsi: mpi3mr: Avoid memcpy field-spanning write WARNING scsi: sd: Fix TCG OPAL unlock on system resume scsi: sg: Avoid sg device teardown race scsi: lpfc: Copyright updates for 14.4.0.1 patches scsi: lpfc: Update lpfc version to 14.4.0.1 scsi: lpfc: Define types in a union for generic void *context3 ptr scsi: lpfc: Define lpfc_dmabuf type for ctx_buf ptr scsi: lpfc: Define lpfc_nodelist type for ctx_ndlp ptr scsi: lpfc: Use a dedicated lock for ras_fwlog state scsi: lpfc: Release hbalock before calling lpfc_worker_wake_up() scsi: lpfc: Replace hbalock with ndlp lock in lpfc_nvme_unregister_port() scsi: lpfc: Update lpfc_ramp_down_queue_handler() logic scsi: lpfc: Remove IRQF_ONESHOT flag from threaded IRQ handling scsi: lpfc: Move NPIV's transport unregistration to after resource clean up scsi: lpfc: Remove unnecessary log message in queuecommand path scsi: qla2xxx: Update version to 10.02.09.200-k scsi: qla2xxx: Delay I/O Abort on PCI error scsi: qla2xxx: Change debug message during driver unload ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fix from Wolfram Sang: "A fix from Andi for I2C host drivers" * tag 'i2c-for-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i801: Fix a refactoring that broke a touchpad on Lenovo P1
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a bunch of small USB fixes for reported problems and regressions for 6.9-rc2. Included in here are: - deadlock fixes for long-suffering issues - USB phy driver revert for reported problem - typec fixes for reported problems - duplicate id in dwc3 dropped - dwc2 driver fixes - udc driver warning fix - cdc-wdm race bugfix - other tiny USB bugfixes All of these have been in linux-next this past week with no reported issues" * tag 'usb-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits) USB: core: Fix deadlock in port "disable" sysfs attribute USB: core: Add hub_get() and hub_put() routines usb: typec: ucsi: Check capabilities before cable and identity discovery usb: typec: ucsi: Clear UCSI_CCI_RESET_COMPLETE before reset usb: typec: ucsi_acpi: Refactor and fix DELL quirk usb: typec: ucsi: Ack unsupported commands usb: typec: ucsi: Check for notifications after init usb: typec: ucsi: Clear EVENT_PENDING under PPM lock usb: typec: Return size of buffer if pd_set operation succeeds usb: udc: remove warning when queue disabled ep usb: dwc3: pci: Drop duplicate ID usb: dwc3: Properly set system wakeup Revert "usb: phy: generic: Get the vbus supply" usb: cdc-wdm: close race between read and workqueue usb: dwc2: gadget: LPM flow fix usb: dwc2: gadget: Fix exiting from clock gating usb: dwc2: host: Fix ISOC flow in DDMA mode usb: dwc2: host: Fix remote wakeup from hibernation usb: dwc2: host: Fix hibernation flow USB: core: Fix deadlock in usb_deauthorize_interface() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are two small staging driver fixes for the vc04_services driver that resolve reported problems: - strncpy fix for information leak - another information leak discovered by the previous strncpy fix Both of these have been in linux-next all this past week with no reported issues" * tag 'staging-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: vc04_services: fix information leak in create_component() staging: vc04_services: changen strncpy() to strscpy_pad()
-
- Mar 30, 2024
-
-
Wolfram Sang authored
Merge tag 'i2c-host-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current One fix in the i801 driver where a bug caused touchpad malfunctions on some Lenovo P1 models by incorrectly overwriting a status variable during successful SMBUS transactions.
-
Masahiro Yamada authored
Commit c33621b4 ("x86/virt/tdx: Wire up basic SEAMCALL functions") introduced a new instance of core-y instead of the standardized obj-y syntax. X86 Makefiles descend into subdirectories of arch/x86/virt inconsistently; into arch/x86/virt/ via core-y defined in arch/x86/Makefile, but into arch/x86/virt/svm/ via obj-y defined in arch/x86/Kbuild. This is problematic when you build a single object in parallel because multiple threads attempt to build the same file. $ make -j$(nproc) arch/x86/virt/vmx/tdx/seamcall.o [ snip ] AS arch/x86/virt/vmx/tdx/seamcall.o AS arch/x86/virt/vmx/tdx/seamcall.o fixdep: error opening file: arch/x86/virt/vmx/tdx/.seamcall.o.d: No such file or directory make[4]: *** [scripts/Makefile.build:362: arch/x86/virt/vmx/tdx/seamcall.o] Error 2 Use the obj-y syntax, as it works correctly. Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20240330060554.18524-1-masahiroy@kernel.org
-
https://gitlab.freedesktop.org/drm/kernelLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Regular fixes for rc2, quite a few i915/amdgpu as usual, some xe, and then mostly scattered around. rc3 might be quieter with the holidays but we shall see. bridge: - select DRM_KMS_HELPER dma-buf: - fix NULL-pointer deref dp: - fix div-by-zero in DP MST unplug code fbdev: - select FB_IOMEM_FOPS for SBus sched: - fix NULL-pointer deref xe: - Fix build on mips - Fix wrong bound checks - Fix use of msec rather than jiffies - Remove dead code amdgpu: - SMU 14.0.1 updates - DCN 3.5.x updates - VPE fix - eDP panel flickering fix - Suspend fix - PSR fix - DCN 3.0+ fix - VCN 4.0.6 updates - debugfs fix amdkfd: - DMA-Buf fix - GFX 9.4.2 TLB flush fix - CP interrupt fix i915: - Fix for BUG_ON/BUILD_BUG_ON IN I915_memcpy.c - Update a MTL workaround - Fix locking inversion in hwmon's sysfs - Remove a bogus error message around PXP - Fix UAF on VMA - Reset queue_priority_hint on parking - Display Fixes: - Remove duplicated audio enable/disable on SDVO and DP - Disable AuxCCS for Xe driver - Revert init order of MIPI DSI - DRRS debugfs fix with an extra refactor patch - VRR related fixes - Fix a JSL eDP corruption - Fix the cursor physical dma address - BIOS VBT related fix nouveau: - dmem: handle kcalloc() allocation failures qxl: - remove unused variables rockchip: - vop2: remove support for AR30 and AB30 formats vmwgfx: - debugfs: create ttm_resource_manager entry only if needed" * tag 'drm-fixes-2024-03-30' of https://gitlab.freedesktop.org/drm/kernel: (55 commits) drm/i915/bios: Tolerate devdata==NULL in intel_bios_encoder_supports_dp_dual_mode() drm/i915: Pre-populate the cursor physical dma address drm/i915/gt: Reset queue_priority_hint on parking drm/i915/vma: Fix UAF on destroy against retire race drm/i915: Do not print 'pxp init failed with 0' when it succeed drm/i915: Do not match JSL in ehl_combo_pll_div_frac_wa_needed() drm/i915/hwmon: Fix locking inversion in sysfs getter drm/i915/dsb: Fix DSB vblank waits when using VRR drm/i915/vrr: Generate VRR "safe window" for DSB drm/i915/display/debugfs: Fix duplicate checks in i915_drrs_status drm/i915/drrs: Refactor CPU transcoder DRRS check drm/i915/mtl: Update workaround 14018575942 drm/i915/dsi: Go back to the previous INIT_OTP/DISPLAY_ON order, mostly drm/i915/display: Disable AuxCCS framebuffers if built for Xe drm/i915: Stop doing double audio enable/disable on SDVO and g4x+ DP drm/i915: Add includes for BUG_ON/BUILD_BUG_ON in i915_memcpy.c drm/qxl: remove unused variable from `qxl_process_single_command()` drm/qxl: remove unused `count` variable from `qxl_surface_id_alloc()` drm/i915: add bug.h include to i915_memcpy.c drm/vmwgfx: Create debugfs ttm_resource_manager entry only if needed ...
-
Linus Torvalds authored
Merge tag 'linux_kselftest-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "Fixes to seccomp and ftrace tests and a change to add config file for dmabuf-heap test to increase coverage" * tag 'linux_kselftest-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: dmabuf-heap: add config file for the test selftests/seccomp: Try to fit runtime of benchmark into timeout selftests/ftrace: Fix event filter target_func selection
-
Linus Torvalds authored
Merge tag 'linux_kselftest-kunit-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit fixes from Shuah Khan: "One urgent fix for --alltests build failure related to renaming of CONFIG_DAMON_DBGFS to DAMON_DBGFS_DEPRECATED to the missing config option" * tag 'linux_kselftest-kunit-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: configs: Enable CONFIG_DAMON_DBGFS_DEPRECATED for --alltests
-
Muhammad Usama Anjum authored
The config fragment enlists all the config options needed for the test. This config is merged into the kernel's config on which this test is run. Fixed whitespace errors during commit: Shuah Khan <skhan@linuxfoundation.org> Reviewed-by:
T.J. Mercier <tjmercier@google.com> Signed-off-by:
Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org>
-
Mark Brown authored
The seccomp benchmark runs five scenarios, one calibration run with no seccomp filters enabled then four further runs each adding a filter. The calibration run times itself for 15s and then each additional run executes for the same number of times. Currently the seccomp tests, including the benchmark, run with an extended 120s timeout but this is not sufficient to robustly run the tests on a lot of platforms. Sample timings from some recent runs: Platform Run 1 Run 2 Run 3 Run 4 --------- ----- ----- ----- ----- PowerEdge R200 16.6s 16.6s 31.6s 37.4s BBB (arm) 20.4s 20.4s 54.5s Synquacer (arm64) 20.7s 23.7s 40.3s The x86 runs from the PowerEdge are quite marginal and routinely fail, for the successful run reported here the timed portions of the run are at 117.2s leaving less than 3s of margin which is frequently breached. The added overhead of adding filters on the other platforms is such that there is no prospect of their runs fitting into the 120s timeout, especially on 32 bit arm where there is no BPF JIT. While we could lower the time we calibrate for I'm also already seeing the currently completing runs reporting issues with the per filter overheads not matching expectations: Let's instead raise the timeout to 180s which is only a 50% increase on the current timeout which is itself not *too* large given that there's only two tests in this suite. Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org>
-
Mark Rutland authored
The event filter function test has been failing in our internal test farm: | # not ok 33 event filter function - test event filtering on functions Running the test in verbose mode indicates that this is because the test erroneously determines that kmem_cache_free() is the most common caller of kmem_cache_free(): # # + cut -d: -f3 trace # # + sed s/call_site=([^+]*)+0x.*/1/ # # + sort # # + uniq -c # # + sort # # + tail -n 1 # # + sed s/^[ 0-9]*// # # + target_func=kmem_cache_free ... and as kmem_cache_free() doesn't call itself, setting this as the filter function for kmem_cache_free() results in no hits, and consequently the test fails: # # + grep kmem_cache_free trace # # + grep kmem_cache_free # # + wc -l # # + hitcnt=0 # # + grep kmem_cache_free trace # # + grep -v kmem_cache_free # # + wc -l # # + misscnt=0 # # + [ 0 -eq 0 ] # # + exit_fail This seems to be because the system in question has tasks with ':' in their name (which a number of kernel worker threads have). These show up in the trace, e.g. test:.sh-1299 [004] ..... 2886.040608: kmem_cache_free: call_site=putname+0xa4/0xc8 ptr=000000000f4d22f4 name=names_cache ... and so when we try to extact the call_site with: cut -d: -f3 trace | sed 's/call_site=\([^+]*\)+0x.*/\1/' ... the 'cut' command will extrace the column containing 'kmem_cache_free' rather than the column containing 'call_site=...', and the 'sed' command will leave this unchanged. Consequently, the test will decide to use 'kmem_cache_free' as the filter function, resulting in the failure seen above. Fix this by matching the 'call_site=<func>' part specifically to extract the function name. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Reported-by:
Aishwarya TCV <aishwarya.tcv@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-kernel@vger.kernel.org Cc: linux-kselftest@vger.kernel.org Cc: linux-trace-kernel@vger.kernel.org Acked-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org>
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2024-03-28' of https://anongit.freedesktop.org/git/drm/drm-intel into drm-fixes Core/GT Fixes: - Fix for BUG_ON/BUILD_BUG_ON IN I915_memcpy.c (Joonas) - Update a MTL workaround (Tejas) - Fix locking inversion in hwmon's sysfs (Janusz) - Remove a bogus error message around PXP (Jose) - Fix UAF on VMA (Janusz) - Reset queue_priority_hint on parking (Chris) Display Fixes: - Remove duplicated audio enable/disable on SDVO and DP (Ville) - Disable AuxCCS for Xe driver (Juha-Pekka) - Revert init order of MIPI DSI (Ville) - DRRS debugfs fix with an extra refactor patch (Bhanuprakash) - VRR related fixes (Ville) - Fix a JSL eDP corruption (Jonathon) - Fix the cursor physical dma address (Ville) - BIOS VBT related fix (Ville) Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZgYaIVgjIs30mIvS@intel.com
-
Borislav Petkov (AMD) authored
The original version of the mitigation would patch in the calls to the untraining routines directly. That is, the alternative() in UNTRAIN_RET will patch in the CALL to srso_alias_untrain_ret() directly. However, even if commit e7c25c44 ("x86/cpu: Cleanup the untrain mess") meant well in trying to clean up the situation, due to micro- architectural reasons, the untraining routine srso_alias_untrain_ret() must be the target of a CALL instruction and not of a JMP instruction as it is done now. Reshuffle the alternative macros to accomplish that. Fixes: e7c25c44 ("x86/cpu: Cleanup the untrain mess") Signed-off-by:
Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by:
Ingo Molnar <mingo@kernel.org> Cc: stable@kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: - Add missing trace point (noticed when debugging the recent mknod LSM regression) - fscache fix * tag '6.9-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix duplicate fscache cookie warnings smb3: add trace event for mknod
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull thermal control fixes from Rafael Wysocki: "These revert a problematic optimization commit and address a devfreq cooling device issue. Specifics: - Revert thermal core optimization that introduced a functional issue causing a critical trip point to be crossed in some cases (Daniel Lezcano) - Add missing conversion between different state ranges to the devfreq cooling device driver (Ye Zhang)" * tag 'thermal-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: devfreq_cooling: Fix perf state when calculate dfc res_util Revert "thermal: core: Don't update trip points inside the hysteresis range"
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "These fix two issues that may lead to attempts to use memory that has been freed already. Specifics: - Drop __exit annotation from einj_remove() in the ACPI APEI code because this function can be called during runtime (Arnd Bergmann) - Make acpi_db_walk_for_fields() check acpi_evaluate_object() return value to avoid accessing memory that has been freed (Nikita Kiryushin)" * tag 'acpi-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: debugger: check status of acpi_evaluate_object() in acpi_db_walk_for_fields() ACPI: APEI: EINJ: mark remove callback as non-__exit
-
Linus Torvalds authored
The code wasn't exactly wrong, but it was very odd, and it used FOLL_FORCE together with FOLL_WRITE when it really didn't need to (it only set FOLL_WRITE for writable mappings, so then the FOLL_FORCE was pointless). It also pointlessly called __get_user_pages() even when it knew it wouldn't populate anything because the vma wasn't accessible and it explicitly tested for and did *not* set FOLL_FORCE for inaccessible vma's. This code does need to use FOLL_FORCE, because we want to do fault in writable shared mappings, but then the mapping may not actually be readable. And we don't want to use FOLL_WRITE (which would match the permission of the vma), because that would also dirty the pages, which we don't want to do. For very similar reasons, FOLL_FORCE populates a executable-only mapping with no read permissions. We don't have a FOLL_EXEC flag. Yes, it would probably be cleaner to split FOLL_WRITE into two bits (for separate permission and dirty bit handling), and add a FOLL_EXEC flag for the "GUP executable page" case. That would allow us to avoid FOLL_FORCE entirely here. But that's not how our FOLL_xyz bits have traditionally worked, and that would be a much bigger patch. So this at least avoids the FOLL_FORCE | FOLL_WRITE combination that made one of my experimental validation patches trigger a warning. That warning was a false positive (and my experimental patch was incomplete anyway), but it all made me look at this and decide to clean at least this small case up. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rafael J. Wysocki authored
* acpica: ACPICA: debugger: check status of acpi_evaluate_object() in acpi_db_walk_for_fields()
-
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efiLinus Torvalds authored
Pull EFI fixes from Ard Biesheuvel: "These address all the outstanding EFI/x86 boot related regressions: - Revert to the old initrd memory allocation soft limit of INT_MAX, which was dropped inadvertently - Ensure that startup_32() is entered with a valid boot_params pointer when using the new EFI mixed mode protocol - Fix a compiler warning introduced by a fix from the previous pull" * tag 'efi-fixes-for-v6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: x86/efistub: Reinstate soft limit for initrd loading efi/libstub: Cast away type warning in use of max() x86/efistub: Add missing boot_params for mixed mode compat entry
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull block fixes from Jens Axboe: "Small round of minor fixes or cleanups for the 6.9-rc2 kernel, one fixing an issue introduced in 6.8" * tag 'block-6.9-20240329' of git://git.kernel.dk/linux: block: Do not force full zone append completion in req_bio_endio() block: don't reject too large max_user_sectors in blk_validate_limits block: Make blk_rq_set_mixed_merge() static
-
Linus Torvalds authored
Merge tag 'for-6.9/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix MAINTAINERS to not include M: dm-devel for DM entries. - Fix DM vdo's murmurhash to use proper byteswapping methods. - Fix DM integrity clang warning about comparison out-of-range. * tag 'for-6.9/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm integrity: fix out-of-range warning dm vdo murmurhash3: use kernel byteswapping routines instead of GCC ones MAINTAINERS: Remove incorrect M: tag for dm-devel@lists.linux.dev
-
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linuxLinus Torvalds authored
Pull gpio fixes from Bartosz Golaszewski: - fix a procfs failure when requesting an interrupt with a label containing the '/' character - add missing stubs for GPIO lookup functions for !GPIOLIB - fix debug messages that would print "(null)" for NULL strings * tag 'gpio-fixes-for-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpiolib: Fix debug messaging in gpiod_find_and_request() gpiolib: Add stubs for GPIO lookup functions gpio: cdev: sanitize the label before requesting the interrupt
-