- Mar 10, 2018
-
-
Paolo Abeni authored
Some network devices - notably ipvlan slave - are not compatible with any kind of rx_handler. Currently the hook can be installed but any configuration (bridge, bond, macsec, ...) is nonfunctional. This change allocates a priv_flag bit to mark such devices and explicitly forbid installing a rx_handler if such bit is set. The new bit is used by ipvlan slave device. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ganesh Goudar authored
T6 cards can support up to 100 G speeds. So, increase max programmable tx rate limit to 100 Gbps. Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
In preparation to enabling -Wvla, remove VLA usage and replace it with a fixed-length array instead. Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vaibhav Murkute authored
Fixed a coding style issue. Signed-off-by:
Vaibhav Murkute <vaibhavmurkute88@gmail.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Peng Li says: ==================== fixes for configuration lost problems This patchset refactors some functions and some bugs in order to fix the configuration loss problem when resetting and setting channel number. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
This patch fixes the coalesce configuation lost problem when setting the channel number by restoring all vectors's coalesce configuation to vector 0's, because all vectors belonging to the same netdev have the same coalesce configuation for now. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
This patch refoctors the coalesce related struct by introducing the hns3_enet_coalesce struct, in order to fix the coalesce configuation lost problem when changing the channel number. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
Coalesce configuration will be set to default value by hns3_nic_init_vector_data during reset, which causes the coalesce configuration loss problem. This patch fixes it by setting the default value in hns3_nic_alloc_vector_data, which will not be called in the reset process. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
There is a get_vector function, which allocate the vectors for a client, but there is not a put_vector to free the vector. This patch introduces the put_vector function in order to fix the coalesce configuration lost problem during reset process. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
In hns3_set_ringparam, hns3_uninit_all_ring frees the memory pointed by priv->ring_data[i].ring, and hns3_change_all_ring_bd_num use that pointer without mallocing, which will cause a use-after-free problem. The patch fixes it by not freeing the memory in hns3_uninit_all_ring, and uses hns3_put_ring_config to free it when necessary. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
Pause configuration will be set to default value by hclge_tm_schd_init during reset, which causes the RSS configuration loss problem. This patch fixes it by calling hclge_tm_init_hw during reset process , which will set the pause configuration to default value. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
RSS configuration will be set to default value by hclge_rss_init_hw during reset, which causes the RSS configuration loss problem. This patch fixes it by setting the default value in hclge_rss_init_cfg function, which will not be called in the reset process. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
This patch refactors the hclge_get/set_rss_tuple function in order to fix the rss configuration loss problem during reset process. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
This patch refactors the hclge_get/set_rss function in order to fix the rss configuration loss problem during reset process. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Roman Mashak says: ==================== Fix event generation for actions batch Add/Delete mode When adding or deleting a batch of entries, the kernel sends upto TCA_ACT_MAX_PRIO entries in an event to user space. However it does not consider that the action sizes may vary and require different skb sizes. For example : % cat tc-batch.sh TC="sudo /mnt/iproute2.git/tc/tc" $TC actions flush action gact for i in `seq 1 $1`; do cmd="action pass index $i " args=$args$cmd done $TC actions add $args % % ./tc-batch.sh 32 Error: Failed to fill netlink attributes while adding TC action. We have an error talking to the kernel % This patchset introduces new callback in tc_action_ops, which calculates the action size, and passes size to tcf_add_notify()/tcf_del_notify(). The patch fixes act_gact, and the rest of actions will be updated in the follow-up patches. v3: Fixed tcf_action_fill_size() to return shared attrs length when action ->get_fill_size() isn't implemented. v2: Restructured patches to make them bisectable. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roman Mashak authored
Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roman Mashak authored
Introduce routines to calculate size of the shared tc netlink attributes and the full message size including netlink header and tc service header. Update add/delete action logic to have the size for event messages, the size is passed to tcf_add_notify() and tcf_del_notify() where the notification message is being allocated and constructed. Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roman Mashak authored
Add a new callback in tc_action_ops, it will be needed by the tc actions to compute its size when a ADD/DELETE notification message is constructed. This routine has to take into account optional/variable size TLVs specific per action. Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roman Mashak authored
Introduce a new function argument to carry total attributes size for correct allocation of skb in event messages. Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
fallback tunnels (like tunl0, gre0, gretap0, erspan0, sit0, ip6tnl0, ip6gre0) are automatically created when the corresponding module is loaded. These tunnels are also automatically created when a new network namespace is created, at a great cost. In many cases, netns are used for isolation purposes, and these extra network devices are a waste of resources. We are using thousands of netns per host, and hit the netns creation/delete bottleneck a lot. (Many thanks to Kirill for recent work on this) Add a new sysctl so that we can opt-out from this automatic creation. Note that these tunnels are still created for the initial namespace, to be the least intrusive for typical setups. Tested: lpk43:~# cat add_del_unshare.sh for i in `seq 1 40` do (for j in `seq 1 100` ; do unshare -n /bin/true >/dev/null ; done) & done wait lpk43:~# echo 0 >/proc/sys/net/core/fb_tunnels_only_for_init_net lpk43:~# time ./add_del_unshare.sh real 0m37.521s user 0m0.886s sys 7m7.084s lpk43:~# echo 1 >/proc/sys/net/core/fb_tunnels_only_for_init_net lpk43:~# time ./add_del_unshare.sh real 0m4.761s user 0m0.851s sys 1m8.343s lpk43:~# Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Brenda J. Butler authored
With option -P, the test script will pause just before the post_suite functions are called. This allows the tester to inspect the system before it is torn down. Signed-off-by:
Brenda J. Butler <bjb@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Brenda J. Butler authored
When processing the commands in the test cases, substitute the test id for $TESTID. This helps to make more flexible tests. For example, the testid can be given as a command line argument. As an example, if we wish to save the test output to a file named for the test case, we can write in the test case: "cmdUnderTest": "some test command | tee -a $TESTID.out" Signed-off-by:
Brenda J. Butler <bjb@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
Call the common irq free function, rather than going recursive and blowing away the stack, followed by the machine. Fixes: 294d711e ("net: dsa: mv88e6xxx: Poll when no interrupt defined") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roman Mashak authored
Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Tested-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Mar 09, 2018
-
-
Alexander Kurz authored
Remove the duplicated code for asix88179_178a bind and reset methods. Signed-off-by:
Alexander Kurz <akurz@blala.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Kurz authored
The permanent address of asix88179_178a devices is read at probe time and should not be overwritten later. Otherwise it may be overwritten unintentionally with a configured address. Signed-off-by:
Alexander Kurz <akurz@blala.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Edward Cree says: ==================== ntuple filters with RSS This series introduces the ability to mark an ethtool steering filter to use RSS spreading, and the ability to create and configure multiple RSS contexts with different indirection tables, hash keys, and hash fields. An implementation for the sfc driver (for 7000-series and later SFC NICs) is included in patch 2/2. The anticipated use case of this feature is for steering traffic destined for a container (or virtual machine) to the subset of CPUs on which processes in the container (or the VM's vCPUs) are bound, while retaining the scalability of RSS spreading from the viewpoint inside the container. The use of both a base queue number (ring_cookie) and indirection table is intended to allow re-use of a single RSS context to target multiple sets of CPUs. For instance, if an 8-core system is hosting three containers on CPUs [1,2], [3,4] and [6,7], then a single RSS context with an equal-weight [0,1] indirection table could be used to target all three containers by setting ring_cookie to 1, 3 and 6 on the respective filters. v2: Initialised ctx in efx_ef10_filter_insert() to avoid (false positive) gcc warning. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Edward Cree authored
Use a linked list to associate user-facing context IDs with FW-facing context IDs (since the latter can change after an MC reset). Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Edward Cree authored
We use a two-step process to configure a filter with RSS spreading. First, the RSS context is allocated and configured using ETHTOOL_SRSSH; this returns an identifier (rss_context) which can then be passed to subsequent invocations of ETHTOOL_SRXCLSRLINS to specify that the offset from the RSS indirection table lookup should be added to the queue number (ring_cookie) when delivering the packet. Drivers for devices which can only use the indirection table entry directly (not add it to a base queue number) should reject rule insertions combining RSS with a nonzero ring_cookie. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
kbuild test robot authored
Fixes: 9426bbc6 ("rds: use list structure to track information for zerocopy completion notification") Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
kbuild test robot authored
Fixes: d40a126b ("rds: refactor zcopy code into rds_message_zcopy_from_user") Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Acked-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
There are two error paths which are missing unlocks in this function. Fixes: 955dc68c ("net/ncsi: Add generic netlink family") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
We're supposed to use kfree_skb() to free these sk_buffs. Fixes: 955dc68c ("net/ncsi: Add generic netlink family") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Prasad Kanneganti authored
Avoid doing useless work by making sure that the response_list is not empty before scheduling work to process it. Signed-off-by:
Prasad Kanneganti <prasad.kanneganti@cavium.com> Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Intiyaz Basha authored
Corrected length check when data received in the mbox is more than one 64 bit data value Signed-off-by:
Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mlx5-updates-2018-02-28-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Saeed Mahameed says: ==================== mlx5-updates-2018-02-28-2 (IPSec-2) This series follows our previous one to lay out the foundations for IPSec in user-space and extend current kernel netdev IPSec support. As noted in our previous pull request cover letter "mlx5-updates-2018-02-28-1 (IPSec-1)", the IPSec mechanism will be supported through our flow steering mechanism. Therefore, we need to change the initialization order. Furthermore, IPsec is also supported in both egress and ingress. Since our current flow steering is egress only, we add an empty (only implemented through FPGA steering ops) egress namespace to handle that case. We also implement the required flow steering callbacks and logic in our FPGA driver. We extend the FPGA support for ESN and modifying a xfrm too. Therefore, we add support for some new FPGA command interface that supports them. The other required bits are added too. The new features and requirements are advertised via cap bits. Last but not least, we revise our driver's accel_esp API. This API will be shared between our netdev and IB driver, so we need to have all the required functionality from both worlds. Regards, Aviad and Matan ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Thomas Falcon says: ==================== ibmvnic: Clean up net close and fix reset bug This patch set cleans up and reorganizes the driver's net_device close function and leverages that to fix up a bug that can occur during some device resets. Some reset cases require the backing adapter to be disabled before continuing, but other cases, such as during a device failover or partition migration, do not require this step. Since the device will not be initialized at this stage and its command-processing queue is closed, do not send the request to disable the device as it could result in an error or timeout disrupting the reset. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Thomas Falcon authored
During a device failover or partition migration reset, it is not necessary to disable the backing adapter since it should not be running yet and its Command-Response Queue is closed. Sending device commands during this time could result in an error or timeout disrupting the reset process. In these cases, just halt transmissions, clean up resources, and continue with reset. Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Thomas Falcon authored
Introduce a function to halt network operations and clean up any unused or outstanding socket buffers. Then, during device close, disable backing adapter before halting all queues and performing cleanup. This ensures all backing device operations will be stopped before the driver cleans up shared resources. Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Thomas Falcon authored
Remove some dead code now that RX pools are being cleaned. This was included to wait until any pending RX queue interrupts are processed, but NAPI polling should be disabled by this point. Another minor change is to use the net device parameter for any print functions instead of accessing it from the adapter structure. Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-