If auto-priority failover is enabled, the backing device needs time
to settle if hard resetting fails for any reason. Add a delay of 60
seconds before retrying the hard-reset.

Fixes: 2770a798

 ("ibmvnic: Introduce hard reset recovery")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In a failed reset, driver could end up in VNIC_PROBED or VNIC_CLOSED
state and cannot recover in subsequent resets, leaving it offline.
This patch restores the adapter state to reset_state, the original
state when reset was called.

Fixes: b27507bb ("net/ibmvnic: unlock rtnl_lock in reset so linkwatch_event can run")
Fixes: 2770a798

 ("ibmvnic: Introduce hard reset recovery")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

scrq->msgs could be NULL during device reset, causing Linux to crash.
So, check before memset scrq->msgs.

Fixes: c8b2ad0a

 ("ibmvnic: Sanitize entire SCRQ buffer on reset")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When ibmvnic fails to reset, it breaks out of the reset loop and frees
all of the remaining resets from the workqueue. Doing so prevents the
adapter from recovering if no reset is scheduled after that. Instead,
have the driver continue to process resets on the workqueue.

Remove the no longer need free_all_rwi().

Fixes: ed651a10

 ("ibmvnic: Updated reset handling")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Inconsistent login with the vnicserver is causing the device to be
removed. This does not give the device a chance to recover from error
state. This patch schedules a FATAL reset instead to bring the adapter
up.

Fixes: 032c5e82

 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Fix insufficient validation of IPSET_ATTR_IPADDR_IPV6 reported
   by syzbot.

2) Remove spurious reports on nf_tables when lockdep gets disabled,
   from Florian Westphal.

3) Fix memleak in the error path of error path of
   ip_vs_control_net_init(), from Wang Hai.

4) Fix missing control data in flow dissector, otherwise IP address
   matching in hardware offload infra does not work.

5) Fix hardware offload match on prefix IP address when userspace
   does not send a bitwise expression to represent the prefix.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
  netfilter: nftables_offload: build mask based from the matching bytes
  netfilter: nftables_offload: set address type in control dissector
  ipvs: fix possible memory leak in ip_vs_control_net_init
  netfilter: nf_tables: avoid false-postive lockdep splat
  netfilter: ipset: prevent uninit-value in hash_ip6_add
====================

Link: https://lore.kernel.org/r/20201127190313.24947-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

a proper kernel configuration for running kselftest can be obtained with:

 $ yes | make kselftest-merge

enable compile support for the 'red' qdisc: otherwise, tdc kselftest fail
when trying to run tdc test items contained in red.json.

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/cfa23f2d4f672401e6cebca3a321dd1901a9ff07.1606416464.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When inet_rtm_getroute() was converted to use the RCU variants of
ip_route_input() and ip_route_output_key(), the TOS parameters
stopped being masked with IPTOS_RT_MASK before doing the route lookup.

As a result, "ip route get" can return a different route than what
would be used when sending real packets.

For example:

    $ ip route add 192.0.2.11/32 dev eth0
    $ ip route add unreachable 192.0.2.11/32 tos 2
    $ ip route get 192.0.2.11 tos 2
    RTNETLINK answers: No route to host

But, packets with TOS 2 (ECT(0) if interpreted as an ECN bit) would
actually be routed using the first route:

    $ ping -c 1 -Q 2 192.0.2.11
    PING 192.0.2.11 (192.0.2.11) 56(84) bytes of data.
    64 bytes from 192.0.2.11: icmp_seq=1 ttl=64 time=0.173 ms

    --- 192.0.2.11 ping statistics ---
    1 packets transmitted, 1 received, 0% packet loss, time 0ms
    rtt min/avg/max/mdev = 0.173/0.173/0.173/0.000 ms

This patch re-applies IPTOS_RT_MASK in inet_rtm_getroute(), to
return results consistent with real route lookups.

Fixes: 3765d35e

 ("net: ipv4: Convert inet_rtm_getroute to rcu versions of route lookup")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/b2d237d08317ca55926add9654a48409ac1b8f5b.1606412894.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2020-11-28

1) Do not reference the skb for xsk's generic TX side since when looped
   back into RX it might crash in generic XDP, from Björn Töpel.

2) Fix umem cleanup on a partially set up xsk socket when being destroyed,
   from Magnus Karlsson.

3) Fix an incorrect netdev reference count when failing xsk_bind() operation,
   from Marek Majtyka.

4) Fix bpftool to set an error code on failed calloc() in build_btf_type_table(),
   from Zhen Lei.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Add MAINTAINERS entry for BPF LSM
  bpftool: Fix error return value in build_btf_type_table
  net, xsk: Avoid taking multiple skbuff references
  xsk: Fix incorrect netdev reference count
  xsk: Fix umem cleanup bug at socket destruct
  MAINTAINERS: Update XDP and AF_XDP entries
====================

Link: https://lore.kernel.org/r/20201128005104.1205-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Simon Wunderlich says:

====================
Here are some batman-adv bugfixes:

 - Fix head/tailroom issues for fragments, by Sven Eckelmann (3 patches)

* tag 'batadv-net-pullrequest-20201127' of git://git.open-mesh.org/linux-merge:
  batman-adv: Don't always reallocate the fragmentation skb head
  batman-adv: Reserve needed_*room for fragments
  batman-adv: Consider fragmentation for needed_headroom
====================

Link: https://lore.kernel.org/r/20201127173849.19208-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Netfilter changes PACKET_OTHERHOST to PACKET_HOST before invoking the
hooks as, while it's an expected value for a bridge, routing expects
PACKET_HOST. The change is undone later on after hook traversal. This
can be seen with pairs of functions updating skb>pkt_type and then
reverting it to its original value:

For hook NF_INET_PRE_ROUTING:
  setup_pre_routing / br_nf_pre_routing_finish

For hook NF_INET_FORWARD:
  br_nf_forward_ip / br_nf_forward_finish

But the third case where netfilter does this, for hook
NF_INET_POST_ROUTING, the packet type is changed in br_nf_post_routing
but never reverted. A comment says:

  /* We assume any code from br_dev_queue_push_xmit onwards doesn't care
   * about the value of skb->pkt_type. */

But when having a tunnel (say vxlan) attached to a bridge we have the
following call trace:

  br_nf_pre_routing
  br_nf_pre_routing_ipv6
     br_nf_pre_routing_finish
  br_nf_forward_ip
     br_nf_forward_finish
  br_nf_post_routing           <- pkt_type is updated to PACKET_HOST
     br_nf_dev_queue_xmit      <- but not reverted to its original value
  vxlan_xmit
     vxlan_xmit_one
        skb_tunnel_check_pmtu  <- a check on pkt_type is performed

In this specific case, this creates issues such as when an ICMPv6 PTB
should be sent back. When CONFIG_BRIDGE_NETFILTER is enabled, the PTB
isn't sent (as skb_tunnel_check_pmtu checks if pkt_type is PACKET_HOST
and returns early).

If the comment is right and no one cares about the value of
skb->pkt_type after br_dev_queue_push_xmit (which isn't true), resetting
it to its original value should be safe.

Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20201123174902.622102-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic fix from Arnd Bergmann:
 "Add correct MAX_POSSIBLE_PHYSMEM_BITS setting to asm-generic.

  This is a single bugfix for a bug that Stefan Agner found on 32-bit
  Arm, but that exists on several other architectures"

* tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed

Pull ARM SoC fixes from Arnd Bergmann:
 "Another set of patches for devicetree files and Arm SoC specific
  drivers:

   - A fix for OP-TEE shared memory on non-SMP systems

   - multiple code fixes for the OMAP platform, including one regression
     for the CPSW network driver and a few runtime warning fixes

   - Some DT patches for the Rockchip RK3399 platform, in particular
     fixing the MMC device ordering that recently became
     nondeterministic with async probe.

   - Multiple DT fixes for the Tegra platform, including a regression
     fix for suspend/resume on TX2

   - A regression fix for a user-triggered fault in the NXP dpio driver

   - A regression fix for a bug caused by an earlier bug fix in the
     xilinx firmware driver

   - Two more DTC warning fixes

   - Sylvain Lemieux steps down as maintainer for the NXP LPC32xx
     platform"

* tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  arm64: tegra: Fix Tegra234 VDK node names
  arm64: tegra: Wrong AON HSP reg property size
  arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
  arm64: tegra: Correct the UART for Jetson Xavier NX
  arm64: tegra: Disable the ACONNECT for Jetson TX2
  optee: add writeback to valid memory type
  firmware: xilinx: Use hash-table for api feature check
  firmware: xilinx: Fix SD DLL node reset issue
  soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)
  ARM: dts: dra76x: m_can: fix order of clocks
  bus: ti-sysc: suppress err msg for timers used as clockevent/source
  MAINTAINERS: Remove myself as LPC32xx maintainers
  arm64: dts: qcom: clear the warnings caused by empty dma-ranges
  arm64: dts: broadcom: clear the warnings caused by empty dma-ranges
  ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
  arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc.
  arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.
  arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance
  arm64: dts: rockchip: fix NanoPi R2S GMAC clock name
  ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
  ...

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.10-rc6, including fixes from the WiFi driver,
  and CAN subtrees.

  Current release - regressions:

   - gro_cells: reduce number of synchronize_net() calls

   - ch_ktls: release a lock before jumping to an error path

  Current release - always broken:

   - tcp: Allow full IP tos/IPv6 tclass to be reflected in L3 header

  Previous release - regressions:

   - net/tls: fix missing received data after fast remote close

   - vsock/virtio: discard packets only when socket is really closed

   - sock: set sk_err to ee_errno on dequeue from errq

   - cxgb4: fix the panic caused by non smac rewrite

  Previous release - always broken:

   - tcp: fix corner cases around setting ECN with BPF selection of
     congestion control

   - tcp: fix race condition when creating child sockets from syncookies
     on loopback interface

   - usbnet: ipheth: fix connectivity with iOS 14

   - tun: honor IOCB_NOWAIT flag

   - net/packet: fix packet receive on L3 devices without visible hard
     header

   - devlink: Make sure devlink instance and port are in same net
     namespace

   - net: openvswitch: fix TTL decrement action netlink message format

   - bonding: wait for sysfs kobject destruction before freeing struct
     slave

   - net: stmmac: fix upstream patch applied to the wrong context

   - bnxt_en: fix return value and unwind in probe error paths

  Misc:

   - devlink: add extra layer of categorization to the reload stats uAPI
     before it's released"

* tag 'net-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
  sock: set sk_err to ee_errno on dequeue from errq
  mptcp: fix NULL ptr dereference on bad MPJ
  net: openvswitch: fix TTL decrement action netlink message format
  can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
  can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
  can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
  can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
  can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was given
  can: gs_usb: fix endianess problem with candleLight firmware
  ch_ktls: lock is not freed
  net/tls: Protect from calling tls_dev_del for TLS RX twice
  devlink: Make sure devlink instance and port are in same net namespace
  devlink: Hold rtnl lock while reading netdev attributes
  ptp: clockmatrix: bug fix for idtcm_strverscmp
  enetc: Let the hardware auto-advance the taprio base-time of 0
  gro_cells: reduce number of synchronize_net() calls
  net: stmmac: fix incorrect merge of patch upstream
  ipv6: addrlabel: fix possible memory leak in ip6addrlbl_net_init
  Documentation: netdev-FAQ: suggest how to post co-dependent series
  ibmvnic: enhance resetting status check during module exit
  ...

Pull SCSI fixes from James Bottomley:
 "Three small fixes in the UFS driver: two are for power management
  issues and the third is to fix a slew of problem in the sysfs code"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: Fix race between shutdown and runtime resume flow
  scsi: ufs: Make sure clk scaling happens only when HBA is runtime ACTIVE
  scsi: ufs: Fix unexpected values from ufshcd_read_desc_param()

Pull io_uring fixes from Jens Axboe:

 - Out of bounds fix for the cq size cap from earlier this release (Joseph)

 - iov_iter type check fix (Pavel)

 - Files grab + cancelation fix (Pavel)

* tag 'io_uring-5.10-2020-11-27' of git://git.kernel.dk/linux-block:
  io_uring: fix files grab/cancel race
  io_uring: fix ITER_BVEC check
  io_uring: fix shift-out-of-bounds when round up cq size

Pull block fix from Jens Axboe:
 "Just a single fix, for a crash in the keyslot manager"

* tag 'block-5.10-2020-11-27' of git://git.kernel.dk/linux-block:
  block/keyslot-manager: prevent crash when num_slots=1

Pull btrfs fixes from David Sterba:
 "A few fixes for various warnings that accumulated over past two weeks:

   - tree-checker: add missing return values for some errors

   - lockdep fixes
      - when reading qgroup config and starting quota rescan
      - reverse order of quota ioctl lock and VFS freeze lock

   - avoid accessing potentially stale fs info during device scan,
     reported by syzbot

   - add scope NOFS protection around qgroup relation changes

   - check for running transaction before flushing qgroups

   - fix tracking of new delalloc ranges for some cases"

* tag 'for-5.10-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix lockdep splat when enabling and disabling qgroups
  btrfs: do nofs allocations when adding and removing qgroup relations
  btrfs: fix lockdep splat when reading qgroup config on mount
  btrfs: tree-checker: add missing returns after data_ref alignment checks
  btrfs: don't access possibly stale fs_info data for printing duplicate device
  btrfs: tree-checker: add missing return after error in root_item
  btrfs: qgroup: don't commit transaction when we already hold the handle
  btrfs: fix missing delalloc new bit for new delalloc ranges

Pull rdma fixes from Jason Gunthorpe:
 "Two security issues and several small bug fixes. Things seem to have
  stabilized for this release here.

  Summary:

   - Significant out of bounds access security issue in i40iw

   - Fix misuse of mmu notifiers in hfi1

   - Several errors in the register map/usage in hns

   - Missing error returns in mthca"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/hns: Bugfix for memory window mtpt configuration
  RDMA/hns: Fix retry_cnt and rnr_cnt when querying QP
  RDMA/hns: Fix wrong field of SRQ number the device supports
  IB/hfi1: Ensure correct mm is used at all times
  RDMA/i40iw: Address an mmap handler exploit in i40iw
  IB/mthca: fix return value of error branch in mthca_init_cq()

Pull mtd fixes from Miquel Raynal:
 "Because of a recent change in the core, NAND controller drivers
  initializing the ECC engine too early in the probe path are broken.

  Drivers should wait for the NAND device to be discovered and its
  memory layout known before doing any ECC related initialization, so
  instead of reverting the faulty change which is actually moving in the
  right direction, let's fix the drivers directly: socrates, sharpsl,
  r852, plat_nand, pasemi, tmio, txx9ndfmc, orion, mpc5121, lpc32xx_slc,
  lpc32xx_mlc, fsmc, diskonchip, davinci, cs553x, au1550, ams-delta,
  xway and gpio"

* tag 'mtd/fixes-for-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: socrates: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: sharpsl: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: r852: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: plat_nand: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: pasemi: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: tmio: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: txx9ndfmc: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: orion: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: mpc5121: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: lpc32xx_slc: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: lpc32xx_mlc: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: fsmc: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: diskonchip: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: davinci: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: cs553x: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: au1550: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: ams-delta: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: xway: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: gpio: Move the ECC initialization to ->attach_chip()

Pull spi fixes from Mark Brown:
 "A few fixes for v5.10,  one for the core which fixes some potential
  races for controllers with multiple chip selects when configuration of
  the chip select for one client device races with the addition and
  initial setup of an additional client"

* tag 'spi-fix-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: dw: Fix spi registration for controllers overriding CS
  spi: imx: fix the unbalanced spi runtime pm management
  spi: spi-nxp-fspi: fix fspi panic by unexpected interrupts
  spi: Take the SPI IO-mutex in the spi_setup() method

Pull virtual digital TV driver fixes from Mauro Carvalho Chehab:
 "A series of fixes for the new virtual digital TV driver (vidtv), which
  is meant to help doing tests with the digital TV core and media
  userspace apps and libraries.

  They cover a series of issues I found on it, together with a few new
  things in order to make it easier to detect problems at the DVB core"

* tag 'media/v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (36 commits)
  media: vidtv.rst: add kernel-doc markups
  media: vidtv.rst: update vidtv documentation
  media: vidtv: simplify EIT write function
  media: vidtv: simplify NIT write function
  media: vidtv: simplify SDT write function
  media: vidtv: cleanup PMT write table function
  media: vidtv: cleanup PAT write function
  media: vidtv: cleanup PSI table header function
  media: vidtv: cleanup PSI descriptor write function
  media: vidtv: simplify the crc writing logic
  media: vidtv: simplify PSI write function
  media: vidtv: add date to the current event
  media: vidtv: fix service_id at SDT table
  media: vidtv: fix service type
  media: vidtv: add a PID entry for the NIT table
  media: vidtv: properly fill EIT service_id
  media: vidtv: fix the network ID range
  media: vidtv: improve EIT data
  media: vidtv: cleanup null packet initialization logic
  media: vidtv: pre-initialize mux arrays
  ...

Pull drm fixes from Dave Airlie:
 "Unfortunately this has a bit of thanksgiving stuffing in it, as it a
  bit larger (at least the vc4 patches) than I like at this point in
  time.

  The main thing is it has a bunch of regressions fixes for reports in
  the last couple of weeks, ast, nouveau and the amdgpu ttm init fix,
  along with the usual selection of amdgpu and i915 fixes.

  The vc4 fixes are a few but they are fixes and the nastiest one is a
  fix for when you have a 2.4Ghz Wifi and a HDMI signal with a clock in
  that range and there isn't enough shielding and interference happen
  between the two, the fix adjusts the mode clock to try and avoid the
  wifi channels in that case.

  Hopefully you can merge this between turkey slices, and next week
  should be quieter.

  ast:
   - LUT loading regression fix

  nouveau:
   - relocations regression fix

  amdgpu:
   - ttm init oops fix
   - Runtime pm fix
   - SI UVD suspend/resume fix
   - HDCP fix for headless cards
   - Sienna Cichlid golden register update

  i915:
   - Fix Perf/OA workaround register corruption (Lionel)
   - Correct a comment statement in GVT (Yan)
   - Fix GT enable/disable iterrupts, including a race condition that
     prevented GPU to go idle (Chris)
   - Free stale request on destroying the virtual engine (Chris)

  exynos:
   - config dependency fix

  mediatek:
   - unused var removal
   - horizonal front/back porch formula fix

  vc4:
   - wifi and hdmi interference fix
   - mode rejection fixes
   - use after free fix
   - cleanup some code"

* tag 'drm-fixes-2020-11-27-1' of git://anongit.freedesktop.org/drm/drm: (28 commits)
  drm/nouveau: fix relocations applying logic and a double-free
  drm/ast: Reload gamma LUT after changing primary plane's color format
  drm/amdgpu: Fix size calculation when init onchip memory
  drm/amdgpu: update golden setting for sienna_cichlid
  drm/amd/display: Avoid HDCP initialization in devices without output
  drm/i915/gt: Free stale request on destroying the virtual engine
  drm/i915/gt: Don't cancel the interrupt shadow too early
  drm/i915/gt: Track signaled breadcrumbs outside of the breadcrumb spinlock
  drm/amdgpu: fix a page fault
  drm/amdgpu: fix SI UVD firmware validate resume fail
  drm/amd/amdgpu: fix null pointer in runtime pm
  drm/i915/gt: Defer enabling the breadcrumb interrupt to after submission
  drm/i915/gvt: correct a false comment of flag F_UNALIGN
  drm/i915/perf: workaround register corruption in OATAILPTR
  drm/vc4: kms: Don't disable the muxing of an active CRTC
  drm/vc4: kms: Store the unassigned channel list in the state
  drm/exynos: depend on COMMON_CLK to fix compile tests
  drm/mediatek: dsi: Modify horizontal front/back porch byte formula
  drm/vc4: hdmi: Disable Wifi Frequencies
  dt-bindings: display: Add a property to deal with WiFi coexistence
  ...

Merge tag 'linux-can-fixes-for-5.10-20201127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2020-11-27

The first patch is by me and target the gs_usb driver and fixes the endianess
problem with candleLight firmware.

Another patch by me for the mcp251xfd driver add sanity checking to bail out if
no IRQ is configured.

The next three patches target the m_can driver. A patch by me removes the
hardcoded IRQF_TRIGGER_FALLING from the request_threaded_irq() as this clashes
with the trigger level specified in the DT. Further a patch by me fixes the
nominal bitiming tseg2 min value for modern m_can cores. Pankaj Sharma's patch
add support for cores version 3.3.x.

The last patch by Oliver Hartkopp is for af_can and converts a WARN() into a
pr_warn(), which is triggered by the syzkaller. It was able to create a
situation where the closing of a socket runs simultaneously to the notifier
call chain for removing the CAN network device in use.

* tag 'linux-can-fixes-for-5.10-20201127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
  can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
  can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
  can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
  can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was given
  can: gs_usb: fix endianess problem with candleLight firmware
====================

Link: https://lore.kernel.org/r/20201127100301.512603-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'platform-drivers-x86-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 - thinkpad_acpi fixes: two bug-fixes and three model specific quirks

 - fixes for misc other drivers: two bug-fixes and three model specific
   quirks

* tag 'platform-drivers-x86-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: touchscreen_dmi: Add info for the Irbis TW118 tablet
  platform/x86: touchscreen_dmi: Add info for the Predia Basic tablet
  platform/x86: intel-vbtn: Support for tablet mode on HP Pavilion 13 x360 PC
  platform/x86: toshiba_acpi: Fix the wrong variable assignment
  platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE
  platform/x86: thinkpad_acpi: Whitelist P15 firmware for dual fan control
  platform/x86: thinkpad_acpi: Send tablet mode switch at wakeup time
  platform/x86: thinkpad_acpi: Add BAT1 is primary battery quirk for Thinkpad Yoga 11e 4th gen
  platform/x86: thinkpad_acpi: Do not report SW_TABLET_MODE on Yoga 11e
  platform/x86: thinkpad_acpi: add P1 gen3 second fan support

When setting sk_err, set it to ee_errno, not ee_origin.

Commit f5f99309 ("sock: do not set sk_err in
sock_dequeue_err_skb") disabled updating sk_err on errq dequeue,
which is correct for most error types (origins):

  -       sk->sk_err = err;

Commit 38b25793 ("sock: reset sk_err when the error queue is
empty") reenabled the behavior for IMCP origins, which do require it:

  +       if (icmp_next)
  +               sk->sk_err = SKB_EXT_ERR(skb_next)->ee.ee_origin;

But read from ee_errno.

Fixes: 38b25793

 ("sock: reset sk_err when the error queue is empty")
Reported-by: Ayush Ranjan <ayushranjan@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20201126151220.2819322-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If an msk listener receives an MPJ carrying an invalid token, it
will zero the request socket msk entry. That should later
cause fallback and subflow reset - as per RFC - at
subflow_syn_recv_sock() time due to failing hmac validation.

Since commit 4cf8b7e4 ("subflow: introduce and use
mptcp_can_accept_new_subflow()"), we unconditionally dereference
- in mptcp_can_accept_new_subflow - the subflow request msk
before performing hmac validation. In the above scenario we
hit a NULL ptr dereference.

Address the issue doing the hmac validation earlier.

Fixes: 4cf8b7e4

 ("subflow: introduce and use mptcp_can_accept_new_subflow()")
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/03b2cfa3ac80d8fc18272edc6442a9ddf0b1e34e.1606400227.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull kvm fixes from Paolo Bonzini:
 "ARM:
   - Fix alignment of the new HYP sections
   - Fix GICR_TYPER access from userspace

  S390:
   - do not reset the global diag318 data for per-cpu reset
   - do not mark memory as protected too early
   - fix for destroy page ultravisor call

  x86:
   - fix for SEV debugging
   - fix incorrect return code
   - fix for 'noapic' with PIC in userspace and LAPIC in kernel
   - fix for 5-level paging"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: x86/mmu: Fix get_mmio_spte() on CPUs supporting 5-level PT
  KVM: x86: Fix split-irqchip vs interrupt injection window request
  KVM: x86: handle !lapic_in_kernel case in kvm_cpu_*_extint
  MAINTAINERS: Update email address for Sean Christopherson
  MAINTAINERS: add uv.c also to KVM/s390
  s390/uv: handle destroy page legacy interface
  KVM: arm64: vgic-v3: Drop the reporting of GICR_TYPER.Last for userspace
  KVM: SVM: fix error return code in svm_create_vcpu()
  KVM: SVM: Fix offset computation bug in __sev_dbg_decrypt().
  KVM: arm64: Correctly align nVHE percpu data
  KVM: s390: remove diag318 reset code
  KVM: s390: pv: Mark mm as protected after the set secure parameters and improve cleanup

Currently, the openvswitch module is not accepting the correctly formated
netlink message for the TTL decrement action. For both setting and getting
the dec_ttl action, the actions should be nested in the
OVS_DEC_TTL_ATTR_ACTION attribute as mentioned in the openvswitch.h uapi.

When the original patch was sent, it was tested with a private OVS userspace
implementation. This implementation was unfortunately not upstreamed and
reviewed, hence an erroneous version of this patch was sent out.

Leaving the patch as-is would cause problems as the kernel module could
interpret additional attributes as actions and vice-versa, due to the
actions not being encapsulated/nested within the actual attribute, but
being concatinated after it.

Fixes: 744676e7

 ("openvswitch: add TTL decrement action")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/160622121495.27296.888010441924340582.stgit@wsfd-netdev64.ntdv.lab.eng.bos.redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull powerpc fixes from Michael Ellerman:
 "Some more powerpc fixes for 5.10:

   - regression fix for a boot failure on some 32-bit machines.

   - fix for host crashes in the KVM system reset handling.

   - fix for a possible oops in the KVM XIVE interrupt handling on
     Power9.

   - fix for host crashes triggerable via the KVM emulated MMIO handling
     when running HPT guests.

   - a couple of small build fixes.

  Thanks to Andreas Schwab, Cédric Le Goater, Christophe Leroy, Erhard
  Furtner, Greg Kurz, Greg Kurz, Németh Márton, Nicholas Piggin, Nick
  Desaulniers, Serge Belyshev, and Stephen Rothwell"

* tag 'powerpc-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Fix allnoconfig build since uaccess flush
  powerpc/64s/exception: KVM Fix for host DSI being taken in HPT guest MMU context
  powerpc: Drop -me200 addition to build flags
  KVM: PPC: Book3S HV: XIVE: Fix possible oops when accessing ESB page
  powerpc/64s: Fix KVM system reset handling when CONFIG_PPC_PSERIES=y
  powerpc/32s: Use relocation offset when setting early hash table

Pull arm64 fixes from Will Deacon:
 "The main changes are relating to our handling of access/dirty bits,
  where our low-level page-table helpers could lead to stale young
  mappings and loss of the dirty bit in some cases (the latter has not
  been observed in practice, but could happen when clearing "soft-dirty"
  if we enabled that). These were posted as part of a larger series, but
  the rest of that is less urgent and needs a v2 which I'll get to
  shortly.

  In other news, we've now got a set of fixes to resolve the
  lockdep/tracing problems that have been plaguing us for a while, but
  they're still a bit "fresh" and I plan to send them to you next week
  after we've got some more confidence in them (although initial CI
  results look good).

  Summary:

   - Fix kerneldoc warnings generated by ACPI IORT code

   - Fix pte_accessible() so that access flag is ignored

   - Fix missing header #include

   - Fix loss of software dirty bit across pte_wrprotect() when HW DBM
     is enabled"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: pgtable: Ensure dirty bit is preserved across pte_wrprotect()
  arm64: pgtable: Fix pte_accessible()
  ACPI/IORT: Fix doc warnings in iort.c
  arm64/fpsimd: add <asm/insn.h> to <asm/kprobes.h> to fix fpsimd build

Pull iommu fixes from Will Deacon:
 "Here's another round of IOMMU fixes for -rc6 consisting mainly of a
  bunch of independent driver fixes. Thomas agreed for me to take the
  x86 'tboot' fix here, as it fixes a regression introduced by a vt-d
  change.

   - Fix intel iommu driver when running on devices without VCCAP_REG

   - Fix swiotlb and "iommu=pt" interaction under TXT (tboot)

   - Fix missing return value check during device probe()

   - Fix probe ordering for Qualcomm SMMU implementation

   - Ensure page-sized mappings are used for AMD IOMMU buffers with SNP
     RMP"

* tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  iommu/vt-d: Don't read VCCAP register unless it exists
  x86/tboot: Don't disable swiotlb when iommu is forced on
  iommu: Check return of __iommu_attach_device()
  arm-smmu-qcom: Ensure the qcom_scm driver has finished probing
  iommu/amd: Enforce 4k mapping for certain IOMMU data structures

Pull printk fixes from Petr Mladek:

 - do not lose trailing newline in pr_cont() calls

 - two trivial fixes for a dead store and a config description

* tag 'printk-for-5.10-rc6-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk: finalize records with trailing newlines
  printk: remove unneeded dead-store assignment
  init/Kconfig: Fix CPU number in LOG_CPU_MAX_BUF_SHIFT description

Pull writeback fix from Jan Kara:
 "A fix of possible missing string termination in writeback tracepoints"

* tag 'writeback_for_v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  trace: fix potenial dangerous pointer

Merge tag 'optee-valid-memory-type-for-v5.11' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes

Add writeback to valid OP-TEE shared memory types

Allows OP-TEE to work with ARMv7 based single CPU systems by allowing
writeback cache policy for shared memory.

* tag 'optee-valid-memory-type-for-v5.11' of git://git.linaro.org/people/jens.wiklander/linux-tee:
  optee: add writeback to valid memory type

Link: https://lore.kernel.org/r/20201125120134.GA1642471@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Commit 95fb5b02 ("kvm: x86/mmu: Support MMIO in the TDP MMU") caused
the following WARNING on an Intel Ice Lake CPU:

 get_mmio_spte: detect reserved bits on spte, addr 0xb80a0, dump hierarchy:
 ------ spte 0xb80a0 level 5.
 ------ spte 0xfcd210107 level 4.
 ------ spte 0x1004c40107 level 3.
 ------ spte 0x1004c41107 level 2.
 ------ spte 0x1db00000000b83b6 level 1.
 WARNING: CPU: 109 PID: 10254 at arch/x86/kvm/mmu/mmu.c:3569 kvm_mmu_page_fault.cold.150+0x54/0x22f [kvm]
...
 Call Trace:
  ? kvm_io_bus_get_first_dev+0x55/0x110 [kvm]
  vcpu_enter_guest+0xaa1/0x16a0 [kvm]
  ? vmx_get_cs_db_l_bits+0x17/0x30 [kvm_intel]
  ? skip_emulated_instruction+0xaa/0x150 [kvm_intel]
  kvm_arch_vcpu_ioctl_run+0xca/0x520 [kvm]

The guest triggering this crashes. Note, this happens with the traditional
MMU and EPT enabled, not with the newly introduced TDP MMU. Turns out,
there was a subtle change in the above mentioned commit. Previously,
walk_shadow_page_get_mmio_spte() was setting 'root' to 'iterator.level'
which is returned by shadow_walk_init() and this equals to
'vcpu->arch.mmu->shadow_root_level'. Now, get_mmio_spte() sets it to
'int root = vcpu->arch.mmu->root_level'.

The difference between 'root_level' and 'shadow_root_level' on CPUs
supporting 5-level page tables is that in some case we don't want to
use 5-level, in particular when 'cpuid_maxphyaddr(vcpu) <= 48'
kvm_mmu_get_tdp_level() returns '4'. In case upper layer is not used,
the corresponding SPTE will fail '__is_rsvd_bits_set()' check.

Revert to using 'shadow_root_level'.

Fixes: 95fb5b02

 ("kvm: x86/mmu: Support MMIO in the TDP MMU")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201126110206.2118959-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm_cpu_accept_dm_intr and kvm_vcpu_ready_for_interrupt_injection are
a hodge-podge of conditions, hacked together to get something that
more or less works.  But what is actually needed is much simpler;
in both cases the fundamental question is, do we have a place to stash
an interrupt if userspace does KVM_INTERRUPT?

In userspace irqchip mode, that is !vcpu->arch.interrupt.injected.
Currently kvm_event_needs_reinjection(vcpu) covers it, but it is
unnecessarily restrictive.

In split irqchip mode it's a bit more complicated, we need to check
kvm_apic_accept_pic_intr(vcpu) (the IRQ window exit is basically an INTACK
cycle and thus requires ExtINTs not to be masked) as well as
!pending_userspace_extint(vcpu).  However, there is no need to
check kvm_event_needs_reinjection(vcpu), since split irqchip keeps
pending ExtINT state separate from event injection state, and checking
kvm_cpu_has_interrupt(vcpu) is wrong too since ExtINT has higher
priority than APIC interrupts.  In fact the latter fixes a bug:
when userspace requests an IRQ window vmexit, an interrupt in the
local APIC can cause kvm_cpu_has_interrupt() to be true and thus
kvm_vcpu_ready_for_interrupt_injection() to return false.  When this
happens, vcpu_run does not exit to userspace but the interrupt window
vmexits keep occurring.  The VM loops without any hope of making progress.

Once we try to fix these with something like

     return kvm_arch_interrupt_allowed(vcpu) &&
-        !kvm_cpu_has_interrupt(vcpu) &&
-        !kvm_event_needs_reinjection(vcpu) &&
-        kvm_cpu_accept_dm_intr(vcpu);
+        (!lapic_in_kernel(vcpu)
+         ? !vcpu->arch.interrupt.injected
+         : (kvm_apic_accept_pic_intr(vcpu)
+            && !pending_userspace_extint(v)));

we realize two things.  First, thanks to the previous patch the complex
conditional can reuse !kvm_cpu_has_extint(vcpu).  Second, the interrupt
window request in vcpu_enter_guest()

        bool req_int_win =
                dm_request_for_irq_injection(vcpu) &&
                kvm_cpu_accept_dm_intr(vcpu);

should be kept in sync with kvm_vcpu_ready_for_interrupt_injection():
it is unnecessary to ask the processor for an interrupt window
if we would not be able to return to userspace.  Therefore,
kvm_cpu_accept_dm_intr(vcpu) is basically !kvm_cpu_has_extint(vcpu)
ANDed with the existing check for masked ExtINT.  It all makes sense:

- we can accept an interrupt from userspace if there is a place
  to stash it (and, for irqchip split, ExtINTs are not masked).
  Interrupts from userspace _can_ be accepted even if right now
  EFLAGS.IF=0.

- in order to tell userspace we will inject its interrupt ("IRQ
  window open" i.e. kvm_vcpu_ready_for_interrupt_injection), both
  KVM and the vCPU need to be ready to accept the interrupt.

... and this is what the patch implements.

Reported-by: David Woodhouse <dwmw@amazon.co.uk>
Analyzed-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Nikos Tsironis <ntsironis@arrikto.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>

Centralize handling of interrupts from the userspace APIC
in kvm_cpu_has_extint and kvm_cpu_get_extint, since
userspace APIC interrupts are handled more or less the
same as ExtINTs are with split irqchip.  This removes
duplicated code from kvm_cpu_has_injectable_intr and
kvm_cpu_has_interrupt, and makes the code more similar
between kvm_cpu_has_{extint,interrupt} on one side
and kvm_cpu_get_{extint,interrupt} on the other.

Cc: stable@vger.kernel.org
Reviewed-by: Filippo Sironi <sironi@amazon.de>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvmarm-fixes-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master

KVM/arm64 fixes for v5.10, take #4

- Fix alignment of the new HYP sections
- Fix GICR_TYPER access from userspace