We need a new PCode request commands and reply codes
to be added as a prepartion patch for QGV points
restricting for new SAGV support.

v2: - Extracted those changes into separate patch
      (Ville Syrjälä)

v3: - Moved new PCode masks to another place from
      PCode commands(Ville)

v4: - Moved new PCode masks to correspondent PCode
      command, with identation(Ville)
    - Changed naming to ICL_ instead of GEN11_
      to fit more nicely into existing definition
      style.

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200505102247.32452-5-stanislav.lisovskiy@intel.com

Unmask/enable AUX interrupts on all ports on TGL+. So far the interrupts
worked only on port A, which meant each transaction on other ports took
10ms.

Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504075828.20348-1-imre.deak@intel.com

Use a local to shrink a line under 80 columns, and refactor the common
emit_xcs_breadcrumb() wrapper of ggtt-write.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504180507.6017-1-chris@chris-wilson.co.uk

Repeat the measurement of the clock frequency a few times and use the
median to try and reduce the systematic measurement error.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504044903.7626-6-chris@chris-wilson.co.uk

If the FBC is still writing into stolen, it will overwrite any future
users of that stolen region. Check before release, just to ease any
concerns -- we can remove it again later if it is barking up the wrong
tree.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/1635


Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200503180034.20010-1-chris@chris-wilson.co.uk

In commit 5a7d202b, a logical AND was erroneously changed to an OR,
causing WaIncreaseLatencyIPCEnabled to be enabled unconditionally for
kabylake and coffeelake, even when IPC is disabled. Fix the logic so
that WaIncreaseLatencyIPCEnabled is only used when IPC is enabled.

Fixes: 5a7d202b

 ("drm/i915: Drop WaIncreaseLatencyIPCEnabled/1140 for cnl")
Cc: stable@vger.kernel.org # 5.3.x+
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430214654.51314-1-sultan@kerneltoast.com

All these ROUNDING_FACTORs and whatnot are making this thing hard to
read. Get rid of them. And let's massage some of the fractions to
give us less questionable intermediate results and perhaps less
divisions.

Also looks like a good helping of 64bit math stuff is needed to
avoid some of overflows present in the current code. There
might still be a few overflows, namely when calculating
link_clks_available/samples_room (would require a huge hblank
though), and potentially when calculating hblank_rise (not sure
how large link_clks_active can get).

It looks like we're still not calculating exactly what the spec says
since we truncate tu_data and tu_line early. But I'm too lazy to
figure out if we could avoid that.

v2: Fix typo in commit msg (Uma)
    Remove ROUNDING_FACTOR define (Uma)
    s/5*link_clk+5*cdclk/5*(link_clk+cdclk)/ (Chris)

Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429185457.26235-3-ville.syrjala@linux.intel.com


Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>

Since the code seems insistent on using the variable names from the
bspec formulat, let's be consistent and use those names for all
the things. For some reason 'link_clk' and 'lanes' were left out
in the code until now.

Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429185457.26235-2-ville.syrjala@linux.intel.com


Reviewed-by: Uma Shankar <uma.shankar@intel.com>

mode.vrefresh is rounded to the nearest integer. You don't want to use
it anywhere that requires precision. Also I want to nuke it.
vtotal*vrefresh == 1000*clock/htotal, so let's use the latter.

Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429185457.26235-1-ville.syrjala@linux.intel.com


Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>

Remove all the stepping dependent cnl workarounds. Bspec lists
more steppings than this so presumably these are classed as
pre-production. And this is cnl after all so no one should
really care anyway.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430125822.21985-2-ville.syrjala@linux.intel.com


Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

Display WA #1105 says that FBC requires PLANE_STRIDE to be a multiple
of 512 bytes on gen9 and glk.

This is definitely true for glk as certain tests (such as
igt/kms_big_fb/linear-16bpp-rotate-0) are now failing when the
display resolution results in a plane stride which is not a
multiple of 512 bytes.

Curiously I was not able to reproduce this on a KBL. First I
suspected that our use of the FBC override stride explain this,
but after trying to use the override stride on glk the test
still failed. I did try both the old CHICKEN_MISC_4 way and
the new FBC_STRIDE way, neither had any effect on the result.

Anyways, we need this at least on glk. But let's trust the spec
and apply the w/a for all gen9 as well, despite being unable to
reproduce the problem.

v2: s/FBC_CHICKEN/FBC_STRIDE/ in commit msg

Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: 691f7ba5

 ("drm/i915/display/fbc: Make fences a nice-to-have for GEN9+")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-2-ville.syrjala@linux.intel.com


Reviewed-by: Matt Roper <matthew.d.roper@intel.com>

That is a preparation patch before next one where we
introduce old_bw_state and a bunch of other changes
as well.
In a review comment it was suggested to split out
at least that renaming into a separate patch, what
is done here.

v2: Removed spurious space

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200423075902.21892-8-stanislav.lisovskiy@intel.com

We need to calculate SAGV mask also in a non-modeset
commit, however currently active_pipes are only calculated
for modesets in global atomic state, thus now we will be
tracking those also in bw_state in order to be able to
properly access global data.

v2: - Removed pre/post plane SAGV updates from modeset(Ville)
    - Now tracking active pipes in intel_can_enable_sagv(Ville)

v3: - lock global state if active_pipes change as well(Ville)

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430195634.7666-1-stanislav.lisovskiy@intel.com

Future platforms require per-crtc SAGV evaluation
and serializing global state when those are changed
from different commits.

v2: - Add has_sagv check to intel_crtc_can_enable_sagv
      so that it sets bit in reject mask.
    - Use bw_state in intel_pre/post_plane_enable_sagv
      instead of atomic state

v3: - Fixed rebase conflict, now using
      intel_atomic_crtc_state_for_each_plane_state in
      order to call it from atomic check
v4: - Use fb modifier from plane state

v5: - Make intel_has_sagv static again(Ville)
    - Removed unnecessary NULL assignments(Ville)
    - Removed unnecessary SAGV debug(Ville)
    - Call intel_compute_sagv_mask only for modesets(Ville)
    - Serialize global state only if sagv results change, but
      not mask itself(Ville)

v6: - use lock global state instead of serialize(Ville)
v7: - use both global state lock and serialize depending on
      if we need to change only global state or access hw
      (Ville)

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430191757.18206-1-stanislav.lisovskiy@intel.com

The older arches did not convert MI_STORE_DATA_IMM to using the GTT, but
left them writing to a physical address. The notes suggest that the
primary reason would be so that the writes were cache coherent, as the
CPU cache uses physical tagging. As such we did not implement the
legacy variant of MI_STORE_DATA_IMM and so left all the relocations
synchronous -- but with a small function to convert from the vma address
into the physical address, we can implement asynchronous relocs on these
older arches, fixing up a few tests that require them.

In order to be able to test the legacy paths, refactor the gpu
relocations so that we can hook them up to a selftest.

v2: Use an array of offsets not enum labels for the selftest
v3: Refactor the common igt_hexdump()

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/757


Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504140629.28240-1-chris@chris-wilson.co.uk

It is required that a chained batch be in the same address domain as its
parent, and also that must be specified in the command for earlier gen
as it is not inferred from the chaining until gen6.

Fixes: 964a9b0f

 ("drm/i915/gem: Use chained reloc batches")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504125149.4396-1-chris@chris-wilson.co.uk

Extend the timeout for pcode reads to 20ms as they should not be
performed along critical paths, and succeeding after a short delay is
better than failing entirely.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/1800


Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504044903.7626-1-chris@chris-wilson.co.uk

We only need the device wakeref on freeing the objects if we have to
unbind the object from the global GTT, or otherwise update device
information. If the objects are clean, we never need the wakeref, so
avoid taking until required.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200503171513.18704-1-chris@chris-wilson.co.uk

Currently we clear and disable the RPS pm interrupts on module load, and
presume that they remain disabled forevermore. However, the mask is
cleared on suspend and so after resume they may start showing up again
unexepectedly.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1811
Fixes: 8e99299a

 ("drm/i915/gt: Track use of RPS interrupts in flags")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi@etezian.org>
Reviewed-by: Andi Shyti <andi@etezian.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200502173512.32353-1-chris@chris-wilson.co.uk

If at first we don't succeed, try try again.

Not all engines may support the MI ops we need to perform asynchronous
relocation patching, and so we end up falling back to a synchronous
operation that has a liability of blocking. However, Tvrtko pointed out
we don't need to use the same engine to perform the relocations as we
are planning to execute the execbuf on, and so if we switch over to a
working engine, we can perform the relocation asynchronously. The user
execbuf will be queued after the relocations by virtue of fencing.

This patch creates a new context per execbuf requiring asynchronous
relocations on an unusable engines. This is perhaps a bit excessive and
can be ameliorated by a small context cache, but for the moment we only
need it for working around a little used engine on Sandybridge, and only
if relocations are actually required to an active batch buffer.

Now we just need to teach the relocation code to handle physical
addressing for gen2/3, and we should then have universal support!

Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Testcase: igt/gem_exec_reloc/basic-spin # snb
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200501192945.22215-3-chris@chris-wilson.co.uk

As we can now keep chaining together a relocation batch to process any
number of relocations, we can keep building that relocation batch for
all of the target vma. This avoiding emitting a new request into the
ring for each target, consuming precious ring space and a potential
stall.

v2: Propagate the failure from submitting the relocation batch.

Testcase: igt/gem_exec_reloc/basic-wide-active
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200501192945.22215-2-chris@chris-wilson.co.uk

The ring is a precious resource: we anticipate to only use a few hundred
bytes for a request, and only try to reserve that before we start. If we
go beyond our guess in building the request, then instead of waiting at
the start of execbuf before we hold any locks or other resources, we
may trigger a wait inside a critical region. One example is in using gpu
relocations, where currently we emit a new MI_BB_START from the ring
every time we overflow a page of relocation entries. However, instead of
insert the command into the precious ring, we can chain the next page of
relocation entries as MI_BB_START from the end of the previous.

v2: Delay the emit_bb_start until after all the chained vma
synchronisation is complete. Since the buffer pool batches are idle, this
_should_ be a no-op, but one day we may some fancy async GPU bindings
for new vma!

v3: Use pool/batch consitently, once we start thinking in terms of the
batch vma, use batch->obj.
v4: Explain the magic number 4.

Tvrtko spotted that we lose propagation of the error for failing to
submit the relocation request; that's easier to fix up in the next
patch.

Testcase: igt/gem_exec_reloc/basic-many-active
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200501192945.22215-1-chris@chris-wilson.co.uk

gdb uses ptrace() to peek and poke bytes of the target's address space.
The driver must implement an vm_ops->access() handler or else gdb will
be unable to inspect the pointer and report it as out-of-bounds.
Worse than useless as it causes immediate suspicion of the valid GTT
pointer, distracting the poor programmer trying to find his bug.

v2: Write-protect readonly objects (Matthew).

Testcase: igt/gem_mmap_gtt/ptrace
Testcase: igt/gem_mmap_offset/ptrace
Suggested-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Maciej Patelczyk <maciej.patelczyk@intel.com>
Cc: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200501145120.18830-1-chris@chris-wilson.co.uk

In order to allow userspace to rely on timeslicing to reorder their
batches, we must support preemption of those user batches. Declare
timeslicing as an explicit property that is a combination of having the
kernel support and HW support.

Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 8ee36e04

 ("drm/i915/execlists: Minimalistic timeslicing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200501122249.12417-1-chris@chris-wilson.co.uk

While a perf event is open, keep a reference to the module so we don't
remove the driver internals mid-sampling.

Testcase: igt/perf_pmu/module-unload
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430183324.23984-1-chris@chris-wilson.co.uk

Since the introduction of 'soft-rc6', we aim to park the device quickly
and that results in frequent idling of the whole device. Currently upon
idling we free the batch buffer pool, and so this renders the cache
ineffective for many workloads. If we want to have an effective cache of
recently allocated buffers available for reuse, we need to decouple that
cache from the engine powermanagement and make it timer based. As there
is no reason then to keep it within the engine (where it once made
retirement order easier to track), we can move it up the hierarchy to the
owner of the memory allocations.

v2: Hook up to debugfs/drop_caches to clear the cache on demand.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430111819.10262-2-chris@chris-wilson.co.uk

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

gvt-next-2020-04-22

- remove non-upstream xen support bits (Christoph)
- guest context shadow copy optimization (Yan)
- guest context tracking for shadow skip optimization (Yan)

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422051230.GH11247@zhen-hp.sh.intel.com

Extend coverage of the blitter client by exercising conversion to and
from tiled sources. In the process we perform spot checks to verify that
the tiling/detiling is being applied correctly, along with position
invariance of the tiling parameters.

Signed-off-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430064957.14942-1-chris@chris-wilson.co.uk

We reduced the clocks slowly after a boost event based on the
observation that the smoothness of animations suffered. However, since
reducing the evalution intervals, we should be able to respond to the
rapidly fluctuating workload of a simple desktop animation and so
restore the more aggressive downclocking.

References: 2a8862d2

 ("drm/i915: Reduce the RPS shock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-6-chris@chris-wilson.co.uk

We treat parking as a manual RPS timeout event, and downclock the GPU
for the next unpark and batch execution. However, having restored the
aggressive downclocking and observed that we have very light workloads
whose only interaction is through the manual parking events, carry over
the aggressive downclocking to the fake RPS events.

References: 21abf0bf

 ("drm/i915/gt: Treat idling as a RPS downclock event")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-5-chris@chris-wilson.co.uk

As with the realisation for soft-rc6, we respond to idling the engines
within microseconds, far faster than the response times for HW RC6 and
RPS. Furthermore, our fast parking upon idle, prevents HW RPS from
running for many desktop workloads, as the RPS evaluation intervals are
on the order of tens of milliseconds, but the typical workload is just a
couple of milliseconds, but yet we still need to determine the best
frequency for user latency versus power.

Recognising that the HW evaluation intervals are a poor fit, and that
they were deprecated [in bspec at least] from gen10, start to wean
ourselves off them and replace the EI with a timer and our accurate
busy-stats. The principle benefit of manually evaluating RPS intervals
is that we can be more responsive for better performance and powersaving
for both spiky workloads and steady-state.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1698
Fixes: 98479ada

 ("drm/i915/gt: Treat idling as a RPS downclock event")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-4-chris@chris-wilson.co.uk

Use the new intel_rps.flags field to store whether or not interrupts are
being used with RPS.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi@etezian.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-3-chris@chris-wilson.co.uk

Pull the boolean intel_rps.enabled and intel_rps.active into a single
flags field, in preparation for more.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-2-chris@chris-wilson.co.uk

In the near future, we will utilize the busy-stats on each engine to
approximate the C0 cycles of each, and use that as an input to a manual
RPS mechanism. That entails having busy-stats always enabled and so we
can remove the enable/disable routines and simplify the pmu setup. As a
consequence of always having the stats enabled, we can also show the
current active time via sysfs/engine/xcs/active_time_ns.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-1-chris@chris-wilson.co.uk

We need to keep the default context state around to instantiate new
contexts (aka golden rendercontext), and we also keep it pinned while
the engine is active so that we can quickly reset a hanging context.
However, the default contexts are large enough to merit keeping in
swappable memory as opposed to kernel memory, so we store them inside
shmemfs. Currently, we use the normal GEM objects to create the default
context image, but we can throw away all but the shmemfs file.

This greatly simplifies the tricky power management code which wants to
run underneath the normal GT locking, and we definitely do not want to
use any high level objects that may appear to recurse back into the GT.
Though perhaps the primary advantage of the complex GEM object is that
we aggressively cache the mapping, but here we are recreating the
vm_area everytime time we unpark. At the worst, we add a lightweight
cache, but first find a microbenchmark that is impacted.

Having started to create some utility functions to make working with
shmemfs objects easier, we can start putting them to wider use, where
GEM objects are overkill, such as storing persistent error state.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429172429.6054-1-chris@chris-wilson.co.uk

If intel_context_create() fails then it leads to an error pointer
dereference.  I shuffled things around to make error handling easier.

Fixes: 1dd47b54

 ("drm/i915: Add live selftests for indirect ctx batchbuffers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429132425.GE815283@mwanda

Once the intel_context is closed, the GEM context may be freed and so
the link from intel_context.gem_context is invalid.

<3>[  219.782944] BUG: KASAN: use-after-free in intel_engine_coredump_alloc+0x1bc3/0x2250 [i915]
<3>[  219.782996] Read of size 8 at addr ffff8881d7dff0b8 by task kworker/0:1/12

<4>[  219.783052] CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: G     U            5.7.0-rc2-g1f3ffd7683d54-kasan_118+ #1
<4>[  219.783055] Hardware name: System manufacturer System Product Name/Z170 PRO GAMING, BIOS 3402 04/26/2017
<4>[  219.783105] Workqueue: events heartbeat [i915]
<4>[  219.783109] Call Trace:
<4>[  219.783113]  <IRQ>
<4>[  219.783119]  dump_stack+0x96/0xdb
<4>[  219.783177]  ? intel_engine_coredump_alloc+0x1bc3/0x2250 [i915]
<4>[  219.783182]  print_address_description.constprop.6+0x16/0x310
<4>[  219.783239]  ? intel_engine_coredump_alloc+0x1bc3/0x2250 [i915]
<4>[  219.783295]  ? intel_engine_coredump_alloc+0x1bc3/0x2250 [i915]
<4>[  219.783300]  __kasan_report+0x137/0x190
<4>[  219.783359]  ? intel_engine_coredump_alloc+0x1bc3/0x2250 [i915]
<4>[  219.783366]  kasan_report+0x32/0x50
<4>[  219.783426]  intel_engine_coredump_alloc+0x1bc3/0x2250 [i915]
<4>[  219.783481]  execlists_reset+0x39c/0x13d0 [i915]
<4>[  219.783494]  ? mark_held_locks+0x9e/0xe0
<4>[  219.783546]  ? execlists_hold+0xfc0/0xfc0 [i915]
<4>[  219.783551]  ? lockdep_hardirqs_on+0x348/0x5f0
<4>[  219.783557]  ? _raw_spin_unlock_irqrestore+0x34/0x60
<4>[  219.783606]  ? execlists_submission_tasklet+0x118/0x3a0 [i915]
<4>[  219.783615]  tasklet_action_common.isra.14+0x13b/0x410
<4>[  219.783623]  ? __do_softirq+0x1e4/0x9a7
<4>[  219.783630]  __do_softirq+0x226/0x9a7
<4>[  219.783643]  do_softirq_own_stack+0x2a/0x40
<4>[  219.783647]  </IRQ>
<4>[  219.783692]  ? heartbeat+0x3e2/0x10f0 [i915]
<4>[  219.783696]  do_softirq.part.13+0x49/0x50
<4>[  219.783700]  __local_bh_enable_ip+0x1a2/0x1e0
<4>[  219.783748]  heartbeat+0x409/0x10f0 [i915]
<4>[  219.783801]  ? __live_idle_pulse+0x9f0/0x9f0 [i915]
<4>[  219.783806]  ? lock_acquire+0x1ac/0x8a0
<4>[  219.783811]  ? process_one_work+0x811/0x1870
<4>[  219.783827]  ? rcu_read_lock_sched_held+0x9c/0xd0
<4>[  219.783832]  ? rcu_read_lock_bh_held+0xb0/0xb0
<4>[  219.783836]  ? _raw_spin_unlock_irq+0x1f/0x40
<4>[  219.783845]  process_one_work+0x8ca/0x1870
<4>[  219.783848]  ? lock_acquire+0x1ac/0x8a0
<4>[  219.783852]  ? worker_thread+0x1d0/0xb80
<4>[  219.783864]  ? pwq_dec_nr_in_flight+0x2c0/0x2c0
<4>[  219.783870]  ? do_raw_spin_lock+0x129/0x290
<4>[  219.783886]  worker_thread+0x82/0xb80
<4>[  219.783895]  ? __kthread_parkme+0xaf/0x1b0
<4>[  219.783902]  ? process_one_work+0x1870/0x1870
<4>[  219.783906]  kthread+0x34e/0x420
<4>[  219.783911]  ? kthread_create_on_node+0xc0/0xc0
<4>[  219.783918]  ret_from_fork+0x3a/0x50

<3>[  219.783950] Allocated by task 1264:
<4>[  219.783975]  save_stack+0x19/0x40
<4>[  219.783978]  __kasan_kmalloc.constprop.3+0xa0/0xd0
<4>[  219.784029]  i915_gem_create_context+0xa2/0xab8 [i915]
<4>[  219.784081]  i915_gem_context_create_ioctl+0x1fa/0x450 [i915]
<4>[  219.784085]  drm_ioctl_kernel+0x1d8/0x270
<4>[  219.784088]  drm_ioctl+0x676/0x930
<4>[  219.784092]  ksys_ioctl+0xb7/0xe0
<4>[  219.784096]  __x64_sys_ioctl+0x6a/0xb0
<4>[  219.784100]  do_syscall_64+0x94/0x530
<4>[  219.784103]  entry_SYSCALL_64_after_hwframe+0x49/0xb3

<3>[  219.784120] Freed by task 12:
<4>[  219.784141]  save_stack+0x19/0x40
<4>[  219.784145]  __kasan_slab_free+0x130/0x180
<4>[  219.784148]  kmem_cache_free_bulk+0x1bd/0x500
<4>[  219.784152]  kfree_rcu_work+0x1d8/0x890
<4>[  219.784155]  process_one_work+0x8ca/0x1870
<4>[  219.784158]  worker_thread+0x82/0xb80
<4>[  219.784162]  kthread+0x34e/0x420
<4>[  219.784165]  ret_from_fork+0x3a/0x50

Fixes: 2e46a2a0

 ("drm/i915: Use explicit flag to mark unreachable intel_context")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428090255.10035-1-chris@chris-wilson.co.uk

When building with clang + -Wuninitialized:

drivers/gpu/drm/i915/gt/debugfs_gt_pm.c:407:7: warning: variable
'rpcurupei' is uninitialized when used here [-Wuninitialized]
                           rpcurupei,
                           ^~~~~~~~~
drivers/gpu/drm/i915/gt/debugfs_gt_pm.c:304:16: note: initialize the
variable 'rpcurupei' to silence this warning
                u32 rpcurupei, rpcurup, rpprevup;
                             ^
                              = 0
1 warning generated.

rpupei is assigned twice; based on the second argument to
intel_uncore_read, it seems this one should have been assigned to
rpcurupei.

Fixes: 9c878557 ("drm/i915/gt: Use the RPM config register to determine clk frequencies")
Link: https://github.com/ClangBuiltLinux/linux/issues/1016


Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429030051.920203-1-natechancellor@gmail.com

Check that we do not submit two contexts into ELSP with the same CCID
[upper portion of the descriptor].

References: https://gitlab.freedesktop.org/drm/intel/-/issues/1793


Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428184751.11257-3-chris@chris-wilson.co.uk