- Aug 23, 2016
-
-
Hans de Goede authored
Add a dts file for tablets using the generic inet-q972 PCB. Tablets with this PCB feature a mini-hdmi output, micro-usb usb-host, micro-usb usb-otg, 3.5mm headphone jack, a micro sd slot, (mini) power-barrel and an usb wifi module. This has been tested on a 9.7" 1024x768 qware qw tb9718-qhd tablet. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Just like with a13/a23/a33 most a31 tablets are derived from the same reference design. Add a .dtsi file with all the common bits to avoid endless copy and pasting of these. The sun6i-reference-design-tablet.dtsi this commit adds is a copy of sun6i-a31s-colorfly-e708-q1.dts with a few tablet specific bits removed / left in sun6i-a31s-colorfly-e708-q1.dts. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
The presence of the mma8452_int_e708_q1 node is a copy and paste error, remove it. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
The 32.768 kHz clock inside the A80 SoC is fed from an external source, typically the AC100 RTC module. Make the osc32k placeholder a fixed-factor clock so board dts files can specify its source. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Almost all sun8i tablets use a gsl1680 touchscreen controller, so add a node describing it to reference-design-tablet.dtsi. Almost all, but not all, so mark it as disabled by default (dts files will also need to supply a firmware-name and resolution info). Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
The ga10h tablet has a rtl8703as wifi chip, add a dt node describing it. This enables usage of wifi on this tablet (together with the out of tree rtl8732bs driver). Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
This results in quite a nice cleanup for this dts file. As an added bonus this also enables full otg support. I've tested that this works as advertised. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
The Orange Pi Lite SBC is a small H3 based SBC, with 512MB RAM, micro-sd slot, HDMI out, 2 USB-A connectors, 1 micro-USB connector, sdio attached rtl8189ftv wifi and an ir receiver. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Stefan Mavrodiev authored
A33-OLinuXino is A33 development board designed by Olimex LTD. It has AXP223 PMU, 1GB DRAM, a micro SD card, one USB-OTG connector, headphone and mic jacks, connector for LiPo battery and optional 4GB NAND Flash. It has two 40-pin headers. One for LCD panel, and one for additional modules. Also there is CSI/DSI connector. Signed-off-by:
Stefan Mavrodiev <stefan.mavrodiev@gmail.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
- Aug 22, 2016
-
-
Maxime Ripard authored
The CHIP has a status LED connected to one of the AXP GPIOs. Add the gpio-leds node to be able to use the proper LED framework to control it. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Maxime Ripard authored
Add the AXP209 GPIO node to our AXP209 DTSI so that boards can use it. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org>
-
- Aug 09, 2016
-
-
Hans de Goede authored
This will allow u-boot to fill in a mac-address for Orange Pi 2 variants which use an sdio wifi without an eeprom for the mac. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
There is a new Orange Pi PC *Plus* version available now, this is an extended version of the regular Orange Pi PC with sdio wifi and an eMMC. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> [Maxime: Fix model and compatible] Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Now that we've all the necessary bits in place we can enable full otg support on these tablets. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
- Aug 05, 2016
-
-
Rich Felker authored
Signed-off-by:
Rich Felker <dalias@libc.org>
-
Rich Felker authored
This defconfig is intended not to be specific to a particular board; it enables drivers for all currently-supported hardware, and should be updated to include additional drivers as they are added. Signed-off-by:
Rich Felker <dalias@libc.org>
-
Rich Felker authored
Enable common clk framework for DT-based boards and disable code that depends on the legacy sh clk framework when common clk is enabled. Once legacy drivers are converted over, the old code can be removed entirely. Signed-off-by:
Rich Felker <dalias@libc.org>
-
Yoshinori Sato authored
Signed-off-by:
Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by:
Rich Felker <dalias@libc.org>
-
Markus Elfring authored
The mempool_destroy() function tests whether its argument is NULL and then returns immediately. Thus the test around the calls is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
Rich Felker <dalias@libc.org>
-
Rich Felker authored
Signed-off-by:
Rich Felker <dalias@libc.org>
-
Rich Felker authored
Support is hooked up via a cpu start method specified in the device tree, and also depends on DT nodes that describe the interfaces for performing IPI and identifying which cpu execution is taking place on. The currently used method is a form of spin table, where secondary cpus are unblocked by writing to a special address. Signed-off-by:
Rich Felker <dalias@libc.org>
-
Rich Felker authored
The SH2 version of entry.S uses global variables, which need to be cpu-local in order to work with SMP. For ease of access from asm, simply use arrays indexed by cpu number, and require the availability of an address (mmio register or properly setup per-cpu memory) from which the current cpu's index can be read. Signed-off-by:
Rich Felker <dalias@libc.org>
-
Rich Felker authored
The version of futex.h in asm-generic should really be adapted to do the same thing so that this hideous code does not have to be duplicated per-arch. Signed-off-by:
Rich Felker <dalias@libc.org>
-
Rich Felker authored
Signed-off-by:
Rich Felker <dalias@libc.org>
-
Rich Felker authored
The J-Core cpu has, as an ISA extension, an atomic compare-and-swap instruction cas.l which applications need to use (instead the imask or gusa atomic models, which are fundamentally limited to UP) for synchronization in order to be compatible with SMP systems. Provide a hwcap flag so that it's possible to do runtime selection and support both. Signed-off-by:
Rich Felker <dalias@libc.org>
-
Rich Felker authored
At the CPU/ISA level, the J2 is compatible with SH-2, and thus the changes to add J2 support build on existing SH-2 support. However, J2 does not duplicate the memory-mapped SH-2 features like the cache interface. Instead, the cache interfaces is described in the device tree, and new code is added to be able to access the flat device tree at early boot before it is unflattened. Support is also added for receiving interrupts on trap numbers in the range 16 to 31, since the J-Core aic1 interrupt controller generates these traps. This range was unused but nominally for hardware exceptions on SH-2, and a few values in this range were used for exceptions on SH-2A, but SH-2A has its own version of the relevant code. No individual cpu subtypes are added for J2 since the intent moving forward is to represent SoCs with device tree rather than as hard-coded subtypes in the kernel. The CPU_SUBTYPE_J2 Kconfig item exists only to fit into the existing cpu selection mechanism until it is overhauled. Signed-off-by:
Rich Felker <dalias@libc.org>
-
Dan Carpenter authored
We should set the error code here rather than incorrectly returning 0. Otherwise static checkers complain. Link: http://lkml.kernel.org/r/20160804053525.GM775@mwanda Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
James Hogan authored
The LNKGET based atomic sequence in __cmpxchg_u32 has slightly incorrect constraints for the return value which under certain circumstances can allow an address unit register to be used as the first operand of a CMP instruction. This isn't a valid instruction however as the encodings only allow a data unit to be specified. This would result in an assembler error like the following: Error: failed to assemble instruction: "CMP A0.2,D0Ar6" Fix by changing the constraint from "=&da" (assigned, early clobbered, data or address unit register) to "=&d" (data unit register only). The constraint for the second operand, "bd" (an op2 register where op1 is a data unit register and the instruction supports O2R) is already correct assuming the first operand is a data unit register. Other cases of CMP in inline asm have had their constraints checked, and appear to all be fine. Fixes: 6006c0d8 ("metag: Atomics, locks and bitops") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-metag@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.9.x-
-
- Aug 04, 2016
-
-
Jason Baron authored
The jump table can reference text found in an __exit section. Thus, instead of discarding it at build time, include EXIT_TEXT as part of __init and it will be released when the system boots. Link: http://lkml.kernel.org/r/60284113bb759121e8ae3e99af1535647e52123f.1467837322.git.jbaron@akamai.com Signed-off-by:
Jason Baron <jbaron@akamai.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Joe Perches <joe@perches.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Chris Metcalf authored
Previously, all the __exit sections were just dropped by the link phase. However, if there are static_key (jump label) constructs in __exit sections that are not modules, the link fails with the message: `.exit.text' referenced in section `__jump_table' of xxx.o: defined in discarded section `.exit.text' of xxx.o Support this usage by keeping the .exit.text sections in the final image if JUMP_LABEL is defined, then discarding them once initialization is complete. Link: http://lkml.kernel.org/r/bfd7c107c610c30e992868ebfe2a5d796a097464.1467837322.git.jbaron@akamai.com Signed-off-by:
Jason Baron <jbaron@akamai.com> Signed-off-by:
Chris Metcalf <cmetcalf@mellanox.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Joe Perches <joe@perches.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jason Baron authored
The jump table can reference text found in an __exit section. Thus, instead of discarding it at build/link time, include EXIT_TEXT as part of __init and release it at system boot time. Without this patch the link fails with: `.exit.text' referenced in section `__jump_table' of xxx.o: defined in discarded section `.exit.text' of xxx.o Link: http://lkml.kernel.org/r/d822da427ab07a02a394602eca687104ff682f83.1467837322.git.jbaron@akamai.com Signed-off-by:
Jason Baron <jbaron@akamai.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Joe Perches <joe@perches.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jason Baron authored
The stringify_in_c() macro may not be included. Make the dependency explicit. Link: http://lkml.kernel.org/r/564720c5328edd53c9d56db325be7215440eec3e.1467837322.git.jbaron@akamai.com Signed-off-by:
Jason Baron <jbaron@akamai.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Joe Perches <joe@perches.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Joe Perches <joe@perches.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Krzysztof Kozlowski authored
The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by:
Vineet Gupta <vgupta@synopsys.com> Acked-by:
Robin Murphy <robin.murphy@arm.com> Acked-by:
Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by:
Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Masahiro Yamada authored
The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Steve Capper authored
set_pte_at(.) will set or unset the PTE_RDONLY hardware bit before writing the entry to the table. This can cause problems with the copy-on-write logic in hugetlb_cow: *) hugetlb_cow(.) called to handle a write fault on read only pte, *) Before the copy-on-write updates the new page table a call is made to pte_same(huge_ptep_get(ptep), pte)), to check for a race, *) Because set_pte_at(.) changed the pte, *ptep != pte, and the hugetlb_cow(.) code erroneously assumes that it lost the race, *) The new page is subsequently freed without being used. On arm64 this problem only becomes apparent when we apply: 67961f9d mm/hugetlb: fix huge page reserve accounting for private mappings When one runs the libhugetlbfs test suite, there are allocation errors and hugetlbfs pages become erroneously locked in memory as reserved. (There is a high HugePages_Rsvd: count). In this patch we introduce pte_same which ignores the PTE_RDONLY bit, allowing for the libhugetlbfs test suite to pass as expected and without leaking any reserved HugeTLB pages. Reported-by:
Huang Shijie <shijie.huang@arm.com> Signed-off-by:
Steve Capper <steve.capper@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Bandan Das authored
Commit 4b855078 ("KVM: nVMX: Don't advertise single context invalidation for invept") removed advertising single context invalidation since the spec does not mandate it. However, some hypervisors (such as ESX) require it to be present before willing to use ept in a nested environment. Advertise it and fallback to the global case. Signed-off-by:
Bandan Das <bsd@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Bandan Das authored
Nested vpid is already supported and both single/global modes are advertised to the guest Signed-off-by:
Bandan Das <bsd@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Wanpeng Li authored
BUG: unable to handle kernel NULL pointer dereference at 000000000000008c IP: [<ffffffffc04e0180>] kvm_lapic_hv_timer_in_use+0x10/0x20 [kvm] PGD 0 Oops: 0000 [#1] SMP Call Trace: kvm_arch_vcpu_load+0x86/0x260 [kvm] vcpu_load+0x46/0x60 [kvm] kvm_vcpu_ioctl+0x79/0x7c0 [kvm] ? __lock_is_held+0x54/0x70 do_vfs_ioctl+0x96/0x6a0 ? __fget_light+0x2a/0x90 SyS_ioctl+0x79/0x90 do_syscall_64+0x7c/0x1e0 entry_SYSCALL64_slow_path+0x25/0x25 RIP [<ffffffffc04e0180>] kvm_lapic_hv_timer_in_use+0x10/0x20 [kvm] RSP <ffff8800db1f3d70> CR2: 000000000000008c ---[ end trace a55fb79d2b3b4ee8 ]--- This can be reproduced steadily by kernel_irqchip=off. We should not access preemption timer stuff if lapic is emulated in userspace. This patch fix it by avoiding access preemption timer stuff when kernel_irqchip=off. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-