Skip to content
  1. Dec 08, 2021
    • Sebastian Gottschall's avatar
      ath10k: Fix tx hanging · e8a91863
      Sebastian Gottschall authored 
      

While running stress tests in roaming scenarios (switching ap's every 5
seconds, we discovered a issue which leads to tx hangings of exactly 5
seconds while or after scanning for new accesspoints. We found out that
this hanging is triggered by ath10k_mac_wait_tx_complete since the
empty_tx_wq was not wake when the num_tx_pending counter reaches zero.
To fix this, we simply move the wake_up call to htt_tx_dec_pending,
since this call was missed on several locations within the ath10k code.

Signed-off-by: default avatarSebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: default avatarKalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20210505085806.11474-1-s.gottschall@dd-wrt.com
      e8a91863
    • Peter Oh's avatar
      ath: regdom: extend South Korea regulatory domain support · dec05cdf
      Peter Oh authored 
      

South Korea manufacturer, Samsung, has extended South Korea
regulatory domain pair with 0x5F and has used it for their
devices such as Samsung Galaxy book. Hence add support
0x5F as a regulatory domain pair along with extended country
code, 413.

Signed-off-by: default avatarPeter Oh <ebmajor.dev@gmail.com>
Signed-off-by: default avatarAndreas Tepe <andreas.tepe@debitel.net>
Signed-off-by: default avatarKalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20210915185611.6195-1-ebmajor.dev@gmail.com
      dec05cdf
    • Wen Gong's avatar
      ath11k: add wait operation for tx management packets for flush from mac80211 · dddaa64d
      Wen Gong authored 
      

In ath11k, tx of management packet is doing in a work queue. Sometimes
the workqueue does not finish tx immediately, then it lead after the next
step of vdev delete finished, it start to send the management packet to
firmware and lead firmware crash.

ieee80211_set_disassoc() have logic of ieee80211_flush_queues() after
it send_deauth_disassoc() to ath11k, its purpose is make sure the
deauth was actually sent, so it need to change ath11k to match the
purpose of mac80211.

To address these issue wait for tx mgmt as well as tx data packets.

dmesg log of connect/disconnect to AP:
[  307.522226] wls1: authenticate with 62:66:e4:e9:6a:a9
[  307.586565] wls1: send auth to 62:66:e4:e9:6a:a9 (try 1/3)
[  307.586581] ath11k_pci 0000:05:00.0: mac tx mgmt frame, buf id 0
[  307.586922] ath11k_pci 0000:05:00.0: mac tx mgmt frame, vdev_id 0
[  307.590179] ath11k_pci 0000:05:00.0: wmi mgmt tx comp pending 0 desc id 0
[  307.590181] ath11k_pci 0000:05:00.0: mgmt tx compl ev pdev_id 2, desc_id 0, status 0
[  307.598699] wls1: authenticated
[  307.599483] wls1: associate with 62:66:e4:e9:6a:a9 (try 1/3)
[  307.599506] ath11k_pci 0000:05:00.0: mac tx mgmt frame, buf id 0
[  307.599519] ath11k_pci 0000:05:00.0: mac tx mgmt frame, vdev_id 0
[  307.603059] ath11k_pci 0000:05:00.0: wmi mgmt tx comp pending 0 desc id 0
[  307.603063] ath11k_pci 0000:05:00.0: mgmt tx compl ev pdev_id 2, desc_id 0, status 0
[  307.637105] wls1: associated
[  317.365239] wls1: deauthenticating from 62:66:e4:e9:6a:a9 by local choice (Reason: 3=DEAUTH_LEAVING)
[  317.368104] ath11k_pci 0000:05:00.0: mac tx mgmt frame, buf id 0
[  317.372622] ath11k_pci 0000:05:00.0: mac tx mgmt frame, vdev_id 0
[  317.378320] ath11k_pci 0000:05:00.0: wmi mgmt tx comp pending 0 desc id 0
[  317.378330] ath11k_pci 0000:05:00.0: mgmt tx compl ev pdev_id 2, desc_id 0, status 0
[  317.378359] ath11k_pci 0000:05:00.0: mac mgmt tx flush mgmt pending 0
[  317.421066] ath11k_pci 0000:05:00.0: mac mgmt tx flush mgmt pending 0
[  317.421427] ath11k_pci 0000:05:00.0: mac remove interface (vdev 0)

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01230-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1

Signed-off-by: default avatarWen Gong <quic_wgong@quicinc.com>
Signed-off-by: default avatarKalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211202063705.14321-1-quic_wgong@quicinc.com
      dddaa64d
    • Christophe JAILLET's avatar
      carl9170: Use the bitmap API when applicable · 6273c972
      Christophe JAILLET authored 
      

Use 'bitmap_zalloc()' to simplify code, improve the semantic and avoid some
open-coded arithmetic in allocator arguments.

Note, that this 'bitmap_zalloc()' divides by BITS_PER_LONG the amount of
memory allocated.
The 'roundup()' used to computed the number of needed long should have
been a DIV_ROUND_UP.


Also change the corresponding 'kfree()' into 'bitmap_free()' to keep
consistency.

Use 'bitmap_zero()' to avoid hand writing it.

Signed-off-by: default avatarChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: default avatarChristian Lamparter <chunkeey@gmail.com>
Signed-off-by: default avatarKalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1fe18fb73f71d855043c40c83865ad539f326478.1638396221.git.christophe.jaillet@wanadoo.fr
      6273c972
    • Loic Poulain's avatar
      wcn36xx: Fix max channels retrieval · 09cab430
      Loic Poulain authored 
      Kernel test robot reported:drivers/net/wireless/ath/wcn36xx/smd.c:943:33:
   sparse: sparse: cast truncates bits from constant value (780 becomes 80)

The 'channels' field is not a simple u8 array but an array of
channel_params. Using sizeof for retrieving the max number of
channels is then wrong.

In practice, it was not an issue, because the sizeof returned
value is 780, which is truncated in min_t (u8) to 80, which is
the value we expect...

Fix that properly using ARRAY_SIZE instead of sizeof.

Fixes: d707f812

 ("wcn36xx: Channel list update before hardware scan")
Reported-by: default avatarkernel test robot <lkp@intel.com>
Signed-off-by: default avatarLoic Poulain <loic.poulain@linaro.org>
Signed-off-by: default avatarKalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1638435732-14657-1-git-send-email-loic.poulain@linaro.org
      09cab430
    • Wen Gong's avatar
      ath11k: add 11d scan offload support · 9dcf6808
      Wen Gong authored 
      

Add handler for WMI_11D_NEW_COUNTRY_EVENTID, WMI_11D_SCAN_START_CMDID,
WMI_11D_SCAN_STOP_CMDID.

After vdev create for STATION, send WMI_11D_SCAN_START_CMDID to firmware
and wait firmware complete it, the scan from mac80211 also need to wait
the 11d scan finished, and send WMI_11D_SCAN_STOP_CMDID to firmware
before vdev delete for STATION.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01230-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: default avatarWen Gong <quic_wgong@quicinc.com>
Signed-off-by: default avatarKalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211201071745.17746-4-quic_wgong@quicinc.com
      9dcf6808
    • Wen Gong's avatar
      ath11k: add configure country code for QCA6390 and WCN6855 · 0b05ddad
      Wen Gong authored 
      

Add handler to send WMI_SET_CURRENT_COUNTRY_CMDID to firmware which
is used for QCA6390 and WCN6855.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: default avatarWen Gong <quic_wgong@quicinc.com>
Signed-off-by: default avatarKalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211201071745.17746-3-quic_wgong@quicinc.com
      0b05ddad
    • Wen Gong's avatar
      ath11k: avoid deadlock by change ieee80211_queue_work for regd_update_work · ed05c7cf
      Wen Gong authored 
      

When enable debug config, it print below warning while shut down wlan
interface shuh as run "ifconfig wlan0 down".

The reason is because ar->regd_update_work is ran once, and it is will
call wiphy_lock(ar->hw->wiphy) in function ath11k_regd_update() which
is running in workqueue of ieee80211_local queued by ieee80211_queue_work().
Another thread from "ifconfig wlan0 down" will also accuqire the lock
by wiphy_lock(sdata->local->hw.wiphy) in function ieee80211_stop(), and
then it call ieee80211_stop_device() to flush_workqueue(local->workqueue),
this will wait the workqueue of ieee80211_local finished. Then deadlock
will happen easily if the two thread run meanwhile.

Below warning disappeared after this change.

[  914.088798] ath11k_pci 0000:05:00.0: mac remove interface (vdev 0)
[  914.088806] ath11k_pci 0000:05:00.0: mac stop 11d scan
[  914.088810] ath11k_pci 0000:05:00.0: mac stop 11d vdev id 0
[  914.088827] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0)
[  914.088841] ath11k_pci 0000:05:00.0: send 11d scan stop vdev id 0
[  914.088849] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0
[  914.088856] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0
[  914.096434] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16
[  914.096442] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1)
[  914.096481] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0)
[  914.096491] ath11k_pci 0000:05:00.0: WMI vdev delete id 0
[  914.111598] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16
[  914.111628] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1)
[  914.114659] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 20
[  914.114742] ath11k_pci 0000:05:00.0: htc rx completion ep 2 skb         pK-error
[  914.115977] ath11k_pci 0000:05:00.0: vdev delete resp for vdev id 0
[  914.116685] ath11k_pci 0000:05:00.0: vdev 00:03:7f:29:61:11 deleted, vdev_id 0

[  914.117583] ======================================================
[  914.117592] WARNING: possible circular locking dependency detected
[  914.117600] 5.16.0-rc1-wt-ath+ #1 Tainted: G           OE
[  914.117611] ------------------------------------------------------
[  914.117618] ifconfig/2805 is trying to acquire lock:
[  914.117628] ffff9c00a62bb548 ((wq_completion)phy0){+.+.}-{0:0}, at: flush_workqueue+0x87/0x470
[  914.117674]
               but task is already holding lock:
[  914.117682] ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211]
[  914.117872]
               which lock already depends on the new lock.

[  914.117880]
               the existing dependency chain (in reverse order) is:
[  914.117888]
               -> #3 (&rdev->wiphy.mtx){+.+.}-{4:4}:
[  914.117910]        __mutex_lock+0xa0/0x9c0
[  914.117930]        mutex_lock_nested+0x1b/0x20
[  914.117944]        reg_process_self_managed_hints+0x3a/0xb0 [cfg80211]
[  914.118093]        wiphy_regulatory_register+0x47/0x80 [cfg80211]
[  914.118229]        wiphy_register+0x84f/0x9c0 [cfg80211]
[  914.118353]        ieee80211_register_hw+0x6b1/0xd90 [mac80211]
[  914.118486]        ath11k_mac_register+0x6af/0xb60 [ath11k]
[  914.118550]        ath11k_core_qmi_firmware_ready+0x383/0x4a0 [ath11k]
[  914.118598]        ath11k_qmi_driver_event_work+0x347/0x4a0 [ath11k]
[  914.118656]        process_one_work+0x228/0x670
[  914.118669]        worker_thread+0x4d/0x440
[  914.118680]        kthread+0x16d/0x1b0
[  914.118697]        ret_from_fork+0x22/0x30
[  914.118714]
               -> #2 (rtnl_mutex){+.+.}-{4:4}:
[  914.118736]        __mutex_lock+0xa0/0x9c0
[  914.118751]        mutex_lock_nested+0x1b/0x20
[  914.118767]        rtnl_lock+0x17/0x20
[  914.118783]        ath11k_regd_update+0x15a/0x260 [ath11k]
[  914.118841]        ath11k_regd_update_work+0x15/0x20 [ath11k]
[  914.118897]        process_one_work+0x228/0x670
[  914.118909]        worker_thread+0x4d/0x440
[  914.118920]        kthread+0x16d/0x1b0
[  914.118934]        ret_from_fork+0x22/0x30
[  914.118948]
               -> #1 ((work_completion)(&ar->regd_update_work)){+.+.}-{0:0}:
[  914.118972]        process_one_work+0x1fa/0x670
[  914.118984]        worker_thread+0x4d/0x440
[  914.118996]        kthread+0x16d/0x1b0
[  914.119010]        ret_from_fork+0x22/0x30
[  914.119023]
               -> #0 ((wq_completion)phy0){+.+.}-{0:0}:
[  914.119045]        __lock_acquire+0x146d/0x1cf0
[  914.119057]        lock_acquire+0x19b/0x360
[  914.119067]        flush_workqueue+0xae/0x470
[  914.119084]        ieee80211_stop_device+0x3b/0x50 [mac80211]
[  914.119260]        ieee80211_do_stop+0x5d7/0x830 [mac80211]
[  914.119409]        ieee80211_stop+0x45/0x180 [mac80211]
[  914.119557]        __dev_close_many+0xb3/0x120
[  914.119573]        __dev_change_flags+0xc3/0x1d0
[  914.119590]        dev_change_flags+0x29/0x70
[  914.119605]        devinet_ioctl+0x653/0x810
[  914.119620]        inet_ioctl+0x193/0x1e0
[  914.119631]        sock_do_ioctl+0x4d/0xf0
[  914.119649]        sock_ioctl+0x262/0x340
[  914.119665]        __x64_sys_ioctl+0x96/0xd0
[  914.119678]        do_syscall_64+0x3d/0xd0
[  914.119694]        entry_SYSCALL_64_after_hwframe+0x44/0xae
[  914.119709]
               other info that might help us debug this:

[  914.119717] Chain exists of:
                 (wq_completion)phy0 --> rtnl_mutex --> &rdev->wiphy.mtx

[  914.119745]  Possible unsafe locking scenario:

[  914.119752]        CPU0                    CPU1
[  914.119758]        ----                    ----
[  914.119765]   lock(&rdev->wiphy.mtx);
[  914.119778]                                lock(rtnl_mutex);
[  914.119792]                                lock(&rdev->wiphy.mtx);
[  914.119807]   lock((wq_completion)phy0);
[  914.119819]
                *** DEADLOCK ***

[  914.119827] 2 locks held by ifconfig/2805:
[  914.119837]  #0: ffffffffba3dc010 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock+0x17/0x20
[  914.119872]  #1: ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211]
[  914.120039]
               stack backtrace:
[  914.120048] CPU: 0 PID: 2805 Comm: ifconfig Tainted: G           OE     5.16.0-rc1-wt-ath+ #1
[  914.120064] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011
[  914.120074] Call Trace:
[  914.120084]  <TASK>
[  914.120094]  dump_stack_lvl+0x73/0xa4
[  914.120119]  dump_stack+0x10/0x12
[  914.120135]  print_circular_bug.isra.44+0x221/0x2e0
[  914.120165]  check_noncircular+0x106/0x150
[  914.120203]  __lock_acquire+0x146d/0x1cf0
[  914.120215]  ? __lock_acquire+0x146d/0x1cf0
[  914.120245]  lock_acquire+0x19b/0x360
[  914.120259]  ? flush_workqueue+0x87/0x470
[  914.120286]  ? lockdep_init_map_type+0x6b/0x250
[  914.120310]  flush_workqueue+0xae/0x470
[  914.120327]  ? flush_workqueue+0x87/0x470
[  914.120344]  ? lockdep_hardirqs_on+0xd7/0x150
[  914.120391]  ieee80211_stop_device+0x3b/0x50 [mac80211]
[  914.120565]  ? ieee80211_stop_device+0x3b/0x50 [mac80211]
[  914.120736]  ieee80211_do_stop+0x5d7/0x830 [mac80211]
[  914.120906]  ieee80211_stop+0x45/0x180 [mac80211]
[  914.121060]  __dev_close_many+0xb3/0x120
[  914.121081]  __dev_change_flags+0xc3/0x1d0
[  914.121109]  dev_change_flags+0x29/0x70
[  914.121131]  devinet_ioctl+0x653/0x810
[  914.121149]  ? __might_fault+0x77/0x80
[  914.121179]  inet_ioctl+0x193/0x1e0
[  914.121194]  ? inet_ioctl+0x193/0x1e0
[  914.121218]  ? __might_fault+0x77/0x80
[  914.121238]  ? _copy_to_user+0x68/0x80
[  914.121266]  sock_do_ioctl+0x4d/0xf0
[  914.121283]  ? inet_stream_connect+0x60/0x60
[  914.121297]  ? sock_do_ioctl+0x4d/0xf0
[  914.121329]  sock_ioctl+0x262/0x340
[  914.121347]  ? sock_ioctl+0x262/0x340
[  914.121362]  ? exit_to_user_mode_prepare+0x13b/0x280
[  914.121388]  ? syscall_enter_from_user_mode+0x20/0x50
[  914.121416]  __x64_sys_ioctl+0x96/0xd0
[  914.121430]  ? br_ioctl_call+0x90/0x90
[  914.121445]  ? __x64_sys_ioctl+0x96/0xd0
[  914.121465]  do_syscall_64+0x3d/0xd0
[  914.121482]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  914.121497] RIP: 0033:0x7f0ed051737b
[  914.121513] Code: 0f 1e fa 48 8b 05 15 3b 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e5 3a 0d 00 f7 d8 64 89 01 48
[  914.121527] RSP: 002b:00007fff7be38b98 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[  914.121544] RAX: ffffffffffffffda RBX: 00007fff7be38ba0 RCX: 00007f0ed051737b
[  914.121555] RDX: 00007fff7be38ba0 RSI: 0000000000008914 RDI: 0000000000000004
[  914.121566] RBP: 00007fff7be38c60 R08: 000000000000000a R09: 0000000000000001
[  914.121576] R10: 0000000000000000 R11: 0000000000000202 R12: 00000000fffffffe
[  914.121586] R13: 0000000000000004 R14: 0000000000000000 R15: 0000000000000000
[  914.121620]  </TASK>

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1

Signed-off-by: default avatarWen Gong <quic_wgong@quicinc.com>
Signed-off-by: default avatarKalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211201071745.17746-2-quic_wgong@quicinc.com
      ed05c7cf
  3. Dec 07, 2021
  5. Nov 29, 2021
    • Sriram R's avatar
      ath11k: Avoid NULL ptr access during mgmt tx cleanup · a93789ae
      Sriram R authored 
      

Currently 'ar' reference is not added in skb_cb during
WMI mgmt tx. Though this is generally not used during tx completion
callbacks, on interface removal the remaining idr cleanup callback
uses the ar ptr from skb_cb from mgmt txmgmt_idr. Hence
fill them during tx call for proper usage.

Also free the skb which is missing currently in these
callbacks.

Crash_info:

[19282.489476] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[19282.489515] pgd = 91eb8000
[19282.496702] [00000000] *pgd=00000000
[19282.502524] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[19282.783728] PC is at ath11k_mac_vif_txmgmt_idr_remove+0x28/0xd8 [ath11k]
[19282.789170] LR is at idr_for_each+0xa0/0xc8

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00729-QCAHKSWPL_SILICONZ-3 v2
Signed-off-by: default avatarSriram R <quic_srirrama@quicinc.com>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1637832614-13831-1-git-send-email-quic_srirrama@quicinc.com
      a93789ae
  7. Nov 26, 2021
  9. Nov 25, 2021
  11. Nov 22, 2021
  13. Nov 19, 2021
    • Kalle Valo's avatar
      Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git · 728e26c3
      Kalle Valo authored 
      ath.git patches for v5.17. Major changes:

ath10k

* fetch (pre-)calibration data via nvmem subsystem

ath11k

* enable 802.11 power save mode in station mode for qca6390 and wcn6855

* trace log support

* proper board file detection for WCN6855 based on PCI ids

* BSS color change support
      728e26c3
    • Peter Seiderer's avatar
      ath9k: fix intr_txqs setting · 5125b9a9
      Peter Seiderer authored 
      

The struct ath_hw member intr_txqs is never reset/assigned outside
of ath9k_hw_init_queues() and with the used bitwise-or in the interrupt
handling ar9002_hw_get_isr() accumulates all ever set interrupt flags.

Fix this by using a pure assign instead of bitwise-or for the
first line (note: intr_txqs is only evaluated in case ATH9K_INT_TX bit
is set).

Signed-off-by: default avatarPeter Seiderer <ps.report@gmx.net>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211116220720.30145-1-ps.report@gmx.net
      5125b9a9
    • Seevalamuthu Mariappan's avatar
      ath11k: add hw_param for wakeup_mhi · 081e2d64
      Seevalamuthu Mariappan authored 
      Wakeup mhi is needed before pci_read/write only for QCA6390 and WCN6855. Since
wakeup & release mhi is enabled for all hardwares, below mhi assert is seen in
QCN9074 when doing 'rmmod ath11k_pci':

	Kernel panic - not syncing: dev_wake != 0
	CPU: 2 PID: 13535 Comm: procd Not tainted 4.4.60 #1
	Hardware name: Generic DT based system
	[<80316dac>] (unwind_backtrace) from [<80313700>] (show_stack+0x10/0x14)
	[<80313700>] (show_stack) from [<805135dc>] (dump_stack+0x7c/0x9c)
	[<805135dc>] (dump_stack) from [<8032136c>] (panic+0x84/0x1f8)
	[<8032136c>] (panic) from [<80549b24>] (mhi_pm_disable_transition+0x3b8/0x5b8)
	[<80549b24>] (mhi_pm_disable_transition) from [<80549ddc>] (mhi_power_down+0xb8/0x100)
	[<80549ddc>] (mhi_power_down) from [<7f5242b0>] (ath11k_mhi_op_status_cb+0x284/0x3ac [ath11k_pci])
	[E][__mhi_device_get_sync] Did not enter M0 state, cur_state:RESET pm_state:SHUTDOWN Process
	[E][__mhi_device_get_sync] Did not enter M0 state, cur_state:RESET pm_state:SHUTDOWN Process
	[E][__mhi_device_get_sync] Did not enter M0 state, cur_state:RESET pm_state:SHUTDOWN Process
	[<7f5242b0>] (ath11k_mhi_op_status_cb [ath11k_pci]) from [<7f524878>] (ath11k_mhi_stop+0x10/0x20 [ath11k_pci])
	[<7f524878>] (ath11k_mhi_stop [ath11k_pci]) from [<7f525b94>] (ath11k_pci_power_down+0x54/0x90 [ath11k_pci])
	[<7f525b94>] (ath11k_pci_power_down [ath11k_pci]) from [<8056b2a8>] (pci_device_shutdown+0x30/0x44)
	[<8056b2a8>] (pci_device_shutdown) from [<805cfa0c>] (device_shutdown+0x124/0x174)
	[<805cfa0c>] (device_shutdown) from [<8033aaa4>] (kernel_restart+0xc/0x50)
	[<8033aaa4>] (kernel_restart) from [<8033ada8>] (SyS_reboot+0x178/0x1ec)
	[<8033ada8>] (SyS_reboot) from [<80301b80>] (ret_fast_syscall+0x0/0x34)

Hence, disable wakeup/release mhi using hw_param for other hardwares.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01060-QCAHKSWPL_SILICONZ-1

Fixes: a05bd851

 ("ath11k: read and write registers below unwindowed address")
Signed-off-by: default avatarSeevalamuthu Mariappan <quic_seevalam@quicinc.com>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1636702019-26142-1-git-send-email-quic_seevalam@quicinc.com
      081e2d64
    • Jakub Kicinski's avatar
      Merge tag 'regmap-no-bus-update-bits' of... · 3b1abcf1
      Jakub Kicinski authored 
      Merge tag 'regmap-no-bus-update-bits' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Mark Brown says:

===================
regmap: Allow regmap_update_bits() to be offloaded with no bus

Some hardware can do this so let's use that capability.
===================

Link: https://lore.kernel.org/all/YZWDOidBOssP10yS@sirena.org.uk/


Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      3b1abcf1
    • Jakub Kicinski's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 50fc2494
      Jakub Kicinski authored 
      

Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      50fc2494
    • Linus Torvalds's avatar
      Merge tag 'net-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 8d0112ac
      Linus Torvalds authored 
      Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf, mac80211.

  Current release - regressions:

   - devlink: don't throw an error if flash notification sent before
     devlink visible

   - page_pool: Revert "page_pool: disable dma mapping support...",
     turns out there are active arches who need it

  Current release - new code bugs:

   - amt: cancel delayed_work synchronously in amt_fini()

  Previous releases - regressions:

   - xsk: fix crash on double free in buffer pool

   - bpf: fix inner map state pruning regression causing program
     rejections

   - mac80211: drop check for DONT_REORDER in __ieee80211_select_queue,
     preventing mis-selecting the best effort queue

   - mac80211: do not access the IV when it was stripped

   - mac80211: fix radiotap header generation, off-by-one

   - nl80211: fix getting radio statistics in survey dump

   - e100: fix device suspend/resume

  Previous releases - always broken:

   - tcp: fix uninitialized access in skb frags array for Rx 0cp

   - bpf: fix toctou on read-only map's constant scalar tracking

   - bpf: forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing
     progs

   - tipc: only accept encrypted MSG_CRYPTO msgs

   - smc: transfer remaining wait queue entries during fallback, fix
     missing wake ups

   - udp: validate checksum in udp_read_sock() (when sockmap is used)

   - sched: act_mirred: drop dst for the direction from egress to
     ingress

   - virtio_net_hdr_to_skb: count transport header in UFO, prevent
     allowing bad skbs into the stack

   - nfc: reorder the logic in nfc_{un,}register_device, fix unregister

   - ipsec: check return value of ipv6_skip_exthdr

   - usb: r8152: add MAC passthrough support for more Lenovo Docks"

* tag 'net-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits)
  ptp: ocp: Fix a couple NULL vs IS_ERR() checks
  net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock()
  net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound
  ipv6: check return value of ipv6_skip_exthdr
  e100: fix device suspend/resume
  devlink: Don't throw an error if flash notification sent before devlink visible
  page_pool: Revert "page_pool: disable dma mapping support..."
  ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port()
  octeontx2-af: debugfs: don't corrupt user memory
  NFC: add NCI_UNREG flag to eliminate the race
  NFC: reorder the logic in nfc_{un,}register_device
  NFC: reorganize the functions in nci_request
  tipc: check for null after calling kmemdup
  i40e: Fix display error code in dmesg
  i40e: Fix creation of first queue by omitting it if is not power of two
  i40e: Fix warning message and call stack during rmmod i40e driver
  i40e: Fix ping is lost after configuring ADq on VF
  i40e: Fix changing previously set num_queue_pairs for PFs
  i40e: Fix NULL ptr dereference on VSI filter sync
  i40e: Fix correct max_pkt_size on VF RX queue
  ...
      8d0112ac
    • Linus Torvalds's avatar
      Merge tag 'for-5.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux · 6fdf8864
      Linus Torvalds authored 
      Pull btrfs fixes from David Sterba:
 "Several xes and one old ioctl deprecation. Namely there's fix for
  crashes/warnings with lzo compression that was suspected to be caused
  by first pull merge resolution, but it was a different bug.

  Summary:

   - regression fix for a crash in lzo due to missing boundary checks of
     the page array

   - fix crashes on ARM64 due to missing barriers when synchronizing
     status bits between work queues

   - silence lockdep when reading chunk tree during mount

   - fix false positive warning in integrity checker on devices with
     disabled write caching

   - fix signedness of bitfields in scrub

   - start deprecation of balance v1 ioctl"

* tag 'for-5.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: deprecate BTRFS_IOC_BALANCE ioctl
  btrfs: make 1-bit bit-fields of scrub_page unsigned int
  btrfs: check-integrity: fix a warning on write caching disabled disk
  btrfs: silence lockdep when reading chunk tree during mount
  btrfs: fix memory ordering between normal and ordered work functions
  btrfs: fix a out-of-bound access in copy_compressed_data_to_page()
      6fdf8864
    • Linus Torvalds's avatar
      Merge tag 'fs_for_v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs · db850a9b
      Linus Torvalds authored 
      Pull UDF fix from Jan Kara:
 "A fix for a long-standing UDF bug where we were not properly
  validating directory position inside readdir"

* tag 'fs_for_v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Fix crash after seekdir
      db850a9b