This will enable use of physical arch timers on rk3288, where each
core comes out of reset with a different virtual offset.  Using
physical timers will help with SMP booting on coreboot and older
u-boot and should also allow suspend-resume and cpu-hotplug to work on
all firmwares.

Firmware which does initialize the cpu registers properly at boot and
cpu-hotplug can remove this property from the device tree.

Signed-off-by: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

We now have the physical-timers patches lined up as a dependency in this same
branch, so we can revert the temporary disablement.

This reverts commit b77d4394.

Signed-off-by: Olof Johansson <olof@lixom.net>

These are a pre-req to get rk3288 SMP to work with some firmwares, so merge
it in here as well as in next/drivers.

* clocksource/physical-timers:
  clocksource: arch_timer: Allow the device tree to specify uninitialized timer registers
  clocksource: arch_timer: Fix code to use physical timers when requested

Some 32-bit (ARMv7) systems are architected like this:

* The firmware doesn't know and doesn't care about hypervisor mode and
  we don't want to add the complexity of hypervisor there.

* The firmware isn't involved in SMP bringup or resume.

* The ARCH timer come up with an uninitialized offset (CNTVOFF)
  between the virtual and physical counters.  Each core gets a
  different random offset.

* The device boots in "Secure SVC" mode.

* Nothing has touched the reset value of CNTHCTL.PL1PCEN or
  CNTHCTL.PL1PCTEN (both default to 1 at reset)

On systems like the above, it doesn't make sense to use the virtual
counter.  There's nobody managing the offset and each time a core goes
down and comes back up it will get reinitialized to some other random
value.

This adds an optional property which can inform the kernel of this
situation, and firmware is free to remove the property if it is going
to initialize the CNTVOFF registers when each CPU comes out of reset.

Currently, the best course of action in this case is to use the
physical timer, which is why it is important that CNTHCTL hasn't been
changed from its reset value and it's a reasonable assumption given
that the firmware has never entered HYP mode.

Note that it's been said that on ARMv8 systems the firmware and
kernel really can't be architected as described above.  That means
using the physical timer like this really only makes sense for ARMv7
systems.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Sonny Rao <sonnyrao@chromium.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

This is a bug fix for using physical arch timers when
the arch_timer_use_virtual boolean is false.  It restores the
arch_counter_get_cntpct() function after removal in

0d651e4e "clocksource: arch_timer: use virtual counters"

We need this on certain ARMv7 systems which are architected like this:

* The firmware doesn't know and doesn't care about hypervisor mode and
  we don't want to add the complexity of hypervisor there.

* The firmware isn't involved in SMP bringup or resume.

* The ARCH timer come up with an uninitialized offset between the
  virtual and physical counters.  Each core gets a different random
  offset.

* The device boots in "Secure SVC" mode.

* Nothing has touched the reset value of CNTHCTL.PL1PCEN or
  CNTHCTL.PL1PCTEN (both default to 1 at reset)

One example of such as system is RK3288 where it is much simpler to
use the physical counter since there's nobody managing the offset and
each time a core goes down and comes back up it will get reinitialized
to some other random value.

Fixes: 0d651e4e ("clocksource: arch_timer: use virtual counters")
Cc: stable@vger.kernel.org
Signed-off-by: Sonny Rao <sonnyrao@chromium.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "ARM: BCM5301X: DT changes for v3.19 #2" from Hauke Mehrtens:

ARM: BCM5301X: dts updates

This adds the IRQ number to the main dts file and some new dts files
for newly added devices.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

* tag 'bcm5301x-dt-2014-12-04' of https://github.com/hauke/linux

:
  ARM: BCM5301X: Add DT for Buffalo WZR-600DHP2
  ARM: BCM5301X: Add DT for Asus RT-N18U
  ARM: BCM5301X: Add DT for Buffalo WZR-1750DHP
  ARM: BCM5301X: Add DT for Netgear R6300 V2
  ARM: BCM5301X: Add buttons for Netgear R6250
  ARM: BCM5301X: Add IRQs to Broadcom's bus-axi in DTS file

Signed-off-by: Olof Johansson <olof@lixom.net>

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Merge tag 'v3.19-rockchip-dts4' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Pull "last dts changes for 3.19" from Jason Cooper:

- rk3288 thermal driver that got accepted into the thermal tree
- mmc fifo sizes for Cortex-A9 SoCs
- labels for the leds on the RadxaRock
- core system supply for the Marsboard

* tag 'v3.19-rockchip-dts4' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip

:
  ARM: dts: rockchip: Add input voltage supply regulators in pmic for Marsboard
  ARM: dts: rockchip: set FIFO size for SDMMC, SDIO and EMMC on rk3066 and rk3188
  ARM: dts: rockchip: add label property for leds on Radxa Rock
  ARM: dts: rockchip: enable thermal on rk3288-evb board
  ARM: dts: rockchip: add main thermal info to rk3288
  ARM: dts: rockchip: add RK3288 Thermal data

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull "arm: Xilinx Zynq dt patches for v3.19" from Michal Simek:

- Declare Digilent and vendor
- Add Zybo board support
- Fix VDMA documentation to be align with the driver

* tag 'zynq-dt-for-3.19' of https://github.com/Xilinx/linux-xlnx

:
  arm: dts: zynq: Add Digilent ZYBO board
  arm: dts: zynq: Move crystal freq. to board level
  doc: dt: vendor-prefixes: Add Digilent Inc
  Documentation: devicetree: Fix Xilinx VDMA specification

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

vsys is the core always-on supply of the Marsboard.

Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

IRQ support for Broadcom's bus-axi driver bcma was merged into John
Linville's wireless tree and will show up in 3.19. This patch makes use
of this feature in the DTS file for the the BCM5301X SoCs. I left the
PCIe controller out, because this still needs some discussion.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Add a DTS describing the Digilent ZYBO board. Similar to ZED but with
a 50MHz crystal instead of 33MHz.

Acked-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

The fact that all supported boards use the same 33MHz crystal is a
co-incidence. The Zynq PS support a range of crystal freqs so the
hardcoded setting should be removed from the dtsi. Re-implement it
on the board level.

This prepares support for Zynq boards with different crystal
frequencies (e.g. the Digilent ZYBO).

Acked-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Digilent is a board designer, making various Linux capabable FPGA and
processor boards. Add to the vendor list.

Acked-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

The specification requires xlnx,data-width, but example and driver use
xlnx,datawidth. Change the specification to match the implementation.

Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Fixes: eebeac03 ("dma: Add Xilinx Video DMA DT Binding Documentation")
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

The SDMMC, SDIO and EMMC controllers use an external FIFO whose size is 256x32bit.
This patch set the corresponding fifo-depth properties for both RK3066 and RK3188.

Signed-off-by: Julien CHAUVEAU <julien.chauveau@neo-technologies.fr>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The leds-gpio driver recently switched to the device property API. The device_node
name is no longer retrieved if the "label" devicetree property is not found.
In this case the driver tries to create entries with (null) name in
/sys/class/leds, which is wrong and generates backtrace as several gpio_leds have
the same name. Also renamed subnode "yellow" to "blue" to match the last
schematics updates.

Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Pull "ARM: BCM5301X: Add some more devices to device tree" from Hauke Mehrtens:

The most important part is adding the axi bus to the SoC dtsi file,
this is the main bus on the SoC.

These patches were all send to the arm list and I haven't got any
negative responses.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

* tag 'bcm5301x-dt-2014-11-27' of https://github.com/hauke/linux

:
  ARM: BCM5301X: Add LEDs for Netgear R6250 V1
  ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull "mvebu DT changes for v3.19 (round 2)" from Jason Cooper:

 - mvebu
    - Use simple-card audio on Armada 370 DB
    - Add DSA node for Armada 370 DB
    - Add SDHCI to Armada 38x
    - Armada 370/XP rework to support new Synology boards
    - Add Synology DS213j and DS414
    - Various pinctrl and uart and alias fixes to help bootloaders

* tag 'mvebu-dt-3.19-2' of git://git.infradead.org/linux-mvebu

:
  arm: mvebu: normalize pinctrl entries for Armada SoCs
  arm: mvebu: fix wrongly named DS414 pinctrl entries
  arm: mvebu: add .dts file for Synology DS414
  arm: mvebu: add .dts file for Synology DS213j
  arm: mvebu: define and use common Armada XP SPI pinctrl setting
  arm: mvebu: define and use common Armada XP UART2/3 pinctrl settings
  arm: mvebu: define and use common Armada 370 UART pinctrl settings
  arm: mvebu: define and use common Armada 370 SPI pinctrl settings
  arm: mvebu: move Armada 370/XP pinctrl node definition armada-370-xp.dtsi
  arm: mvebu: use recently introduced uart label for stdout-path
  arm: mvebu: add uartX labels for Armada SoC serial nodes
  arm: mvebu: fix vendor prefix typo in kirkwood-synology.dtsi
  ARM: mvebu: fix ordering in Armada 370 .dtsi
  ARM: mvebu: adjust ethernet aliases according to U-Boot requirements for A38x
  ARM: mvebu: remove clock-frequency from Armada 38x SDHCI Device Tree node
  ARM: mvebu: enable no-1-8-v flag for Armada 385 DB SDHCI interface
  mvebu: 370 RD: Add support for the switch
  ARM: mvebu: use simple-card DT binding for audio on Armada 370 DB
  ARM: mvebu: remove conflicting muxing on Armada 370 DB

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sirf-dts-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux into next/dt

Pull "change pinmux pingroup and add some lost node/prop" from Barry Song:

1. add resets properity for some nodes;
2. change pinctrl groups for audio
3. add PMU node

* tag 'sirf-dts-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux

:
  ARM: dts: atlas6: add resets property for SPI nodes
  ARM: dts: atlas6: add resets property for VPP nodes
  ARM: dts: prima2: add resets property for VPP nodes
  ARM: dts: prima2: add resets property for GPS nodes
  ARM: dts: prima2: add node for Performance Monitor Unit
  ARM: dts: atlas6: Add I2S external clock input pingroup
  ARM: dts: atlas6: add a separate pingroup for i2s mclk output
  ARM: dts: prima2: add I2S 2ch, 6ch, nodin, mclk groups

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-simplefb-for-3.19' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Pull "Allwinner simple frambuffer support" from Maxime Ripard:

This enables the simple framebuffer on all the supported Allwinner SoCs (but
the A80). That allows to have at last a video display usable by using the
framebuffer the firmware might have set up.

* tag 'sunxi-simplefb-for-3.19' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux

: (55 commits)
  ARM: dts: sunxi: Update simplefb nodes so that u-boot can find them
  ARM: dts: sunxi: Add de_be0 clk parent pll to simplefb node
  ARM: dts: sun7i: Add simplefb node
  ARM: dts: sun6i: Add simplefb node
  ARM: dts: sun5i: Add simplefb node
  ARM: dts: sun4i: Add simplefb node
  ARM: dts: sun6i: Add ethernet support to M9 board
  ARM: sun6i: DT: Add PLL6 multiple outputs
  ARM: dts: sun6i: Add support for the status led
  ARM: dts: sun6i: Add EHCI support for the M9 board
  ARM: dts: sunxi: Add regulator-boot-on property to ahci-5v regulator
  ARM: dts: sun7i: Cubietruck: add power supply regulator for USB OTG VBUS
  ARM: dts: sun7i: Cubietruck: override regulator pin
  ARM: sun7i: dtsi: add support for usbphy0
  ARM: dtsi: sunxi: add common VBUS regulator
  ARM: dts: sunxi: Banana Pi: increase startup-delay for the GMAC PHY regulator
  ARM: sun5i: olinuxino: Relicense the device tree under GPLv2/X11
  ARM: sun4i: cubieboard: Relicense the device tree under GPLv2/X11
  ARM: sun7i: pcduino3: Relicense the device tree under GPLv2/X11
  ARM: sun4i: pcduino: Relicense the device tree under GPLv2/X11
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-dt-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Pull "The i.MX device tree changes for 3.19" from Shawn Guo:

 - Device additions for board vf610-colibri, pwm, backlight, I2C, RTC,
   ADC etc.
 - Update i.MX6 phyFLEX board to include PCIe, CAN and audio support
 - Improve SSI clocks description for i.MX5 platforms
 - Add ENET2 support for imx6sx-sdb board
 - Add device tree source for LS1021A SoC, board QDS and TWR
 - Enable cpufreq support for i.MX53
 - Enable VPU device support for i.MX6QDL
 - Enable poweroff support for i.MX6 SoCs
 - Add support for TBS2910 Matrix ARM mini PC which is built on i.MX6Q
 - Create generic base device trees for Vybrid and add support for
   Colibri VF50

Note: the change set is built on top of imx-soc-3.19 to resolve the
dependency that  "ARM: dts: imx53: add cpufreq-dt support" uses the
clock define IMX5_CLK_ARM that is added by "ARM: imx53: clk: add ARM
clock".

* tag 'imx-dt-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (51 commits)
  ARM: dts: imx6q-tbs2910: Enable snvs-poweroff
  ARM: dts: imx6: add pm_power_off support for i.mx6 chips
  ARM: dts: vf-colibri: add USB regulators
  ARM: dts: imx6: phyFLEX: Add CAN support
  ARM: dts: imx6: phyFLEX: Add PCIe
  ARM: dts: imx6: phyFLEX: Set correct interrupt for pmic
  ARM: dts: imx6: phyFLEX: Enable gpmi in module file
  ARM: dts: imx6: phyFLEX: set nodes in alphabetical order
  ARM: dts: vf-colibri-eval-v3.dts: Enable ST-M41T0M6 RTC
  ARM: dts: vf-colibri: Add I2C support
  ARM: dts: imx6qdl: Enable CODA960 VPU
  ARM: dts: imx6q-tbs2910: Remove unneeded 'fsl,mode' property
  ARM: dts: vf610: enable USB misc/phy nodes where necessary
  ARM: dts: vf610: use new GPIO support
  ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards
  ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02
  ARM: dts: vf500-colibri: add Colibri VF50 support
  ARM: dts: vf610: create generic base device trees
  ARM: dts: vf610: assign oscillator to clock module
  dt-bindings: arm: add Freescale LS1021A SoC device tree binding
  ...

Signed-off-by; Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v3.19/dt-part2-updated' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Pull "More dts changes for omaps to add support for new devices" from Tony Lindgren:

- Add DCAN support am335x, am437x and dra7

- Add devices for sb-t3x computers

- Add support for NovaTech OrionLXm

- Add n900 battery and si4713 support

* tag 'omap-for-v3.19/dt-part2-updated' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap

: (26 commits)
  ARM: dts: am335x-evm: Add DCAN1 details
  ARM: dts: am33xx: Update DCAN nodes
  ARM: dts: am33xx: Add control module syscon node
  ARM: dts: am437x-gp: Add dcan support
  ARM: dts: am4372: Add DCAN nodes
  ARM: dts: am4372: Add control module syscon node
  ARM: dts: dra72-evm: Add CAN support
  ARM: dts: dra7-evm: Add CAN support
  ARM: dts: DRA7: Add DCAN nodes
  ARM: dts: dra7: Add syscon regmap for CORE CONTROL area
  ARM: dts: sbc-t3x30: add audio support
  ARM: dts: sbc-t3x: add TV out display alias
  ARM: dts: cm-t3x: add TV out support
  ARM: dts: cm-t3x: add I2C1 pinmux
  ARM: dts: AM43xx: add tscadc DT entries for am437x-evm and am43x-epos-evm
  ARM: dts: cm-t3x30: add keypad support
  ARM: dts: sb-t35: add EEPROM support
  ARM: dts: cm-t3x: add EEPROM support
  ARM: OMAP2+: remove cm-t3x touchscreen pdata quirk
  ARM: dts: cm-t3x: add ADS7846 touchscreen support
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-dt-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Pull "Samsung 3rd DT updates for v3.19" from Kukjin Kim:

- exynos3250
  : remove unused bootargs on exynos3250-rinato
  : add new board dt file for exynos3250-monk
- exynos4
  : add missing clock for MFC
  : specify default clocks for camera
- exynos4x12
  : add TMU related DT nodes
- exynos4412-trats2
  : add max77693-haptic and pwm nodes, enable TMU support
- exynos4412-odroid
  : specify audio clock parents and rates
- exynos5250 and exynos5420
  : add syscon based phandle to i2c device nodes
- exynos5250-spring
  : add trackpad, temperature sensor and usb3505 pinctrl

Note: based on previous tags/samsung-dt-2 for v3.19

* tag 'samsung-dt-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung

:
  ARM: dts: add sysreg phandle to i2c device nodes for exynos
  ARM: dts: Remove unused bootargs from exynos3250-rinato
  ARM: dts: add board dts file for Exynos3250-based Monk board
  Documentation: devicetree: Add Exynos-based boards compatible string
  ARM: dts: add missing clock to MFC device for exynos4
  ARM: dts: Specify audio clock parents and rates for exynos4412-odroid-common
  ARM: dts: Add trackpad to exynos5250-spring
  ARM: dts: Add temperature sensor to exynos5250-spring
  ARM: dts: Add usb3503 pinctrl to exynos5250-spring
  ARM: dts: Add max77693-haptic node for exynos4412-trats2
  ARM: dts: add pwm node for exynos4412-trats2
  ARM: dts: Specify default clocks for Exynos4 camera devices
  ARM: dts: Enable TMU support for exynos4412-trats2
  ARM: dts: Device tree node definition for TMU on exynos4x12

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Pull "Samsung 2nd DT updates for v3.19" from Kukjin Kim:

- add micro SD card SDHCI node for exynos4412-trats
- add exynos4415 DT
- add exynos3250-rinato DT and sleep mode support

Note: based on previous tags/samsung-dt for v3.19

* tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung

:
  ARM: dts: Add micro SD card SDHCI node for exynos4412-trats
  ARM: dts: Add dts files for exynos4415 SoC
  ARM: dts: Add sleep mode of regulator for exynos3250-rinato
  ARM: dts: Add sleep mode pin configuration for exynos3250-rinato
  ARM: dts: Add board dts file for exynos3250-rinato

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v3.19-rockchip-dts3' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Pull "temporarily disable rk3288-smp" from Heiko Stuebner:

Disable smp again on rk3288 temporarily to make Olof's boottest
run again, until the patches for using the physical architected
timers got accepted.

* tag 'v3.19-rockchip-dts3' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip

:
  ARM: dts: rockchip: temporarily disable smp on rk3288

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

This has been successfully tested on Netgear R6250 and two other
development (unnamed) devices, all of them BCM4708 based.
We also got a possitive feedback from R7000 (BCM4709) tester.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

This avoids a boot regression

* sunxi/dt:
  Revert "ARM: dts: sunxi: unify APB1 clock"
  Revert "ARM: dts: sunxi: Use sun4i-a10-apb1-clk for sun6i/sun8i apb2 clocks."

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This patch adds syscon based phandle to i2c device nodes of exynos5250
and exynos5420. These phandles will be used to save restore i2c sysreg
configuration register during s2r from i2c driver.

CC: Rob Herring <robh+dt@kernel.org>
CC: Randy Dunlap <rdunlap@infradead.org>
CC: Russell King <linux@arm.linux.org.uk>
CC: devicetree@vger.kernel.org
CC: linux-doc@vger.kernel.org
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

This patch removes unused dt node of command line from Exynos3250-based
Rinato board because kernel use the command line from bootloader.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

This patch adds new board dts file to support Samsung Monk board which
is based on Exynos3250 SoC and has different H/W configuration from
Rinato.

This dts file support following features:
- eMMC
- Main PMIC (Samsung S2MPS14)
- Interface PMIC (Maxim MAX77836, MUIC, fuel-gauge, charger)
- RTC of Exynos3250
- ADC of Exynos3250 with NTC thermistor
- I2S of Exynos3250
- TMU of Exynos3250
- Secure firmware for Exynos3250 secondary cpu boot
- Serial ports of Exynos3250
- gpio-key for power key

Signed-off-by: Youngjun Cho <yj44.cho@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

This patch adds the missing compatible/description of Exynos-based
boards to remove following build warning.

WARNING: DT compatible string "samsung,..." appears un-documented --
check ./Documentation/devicetree/bindings/

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

There are currently 2 differents naming conventions used between the
existing Armada SoC DT files for pinctrl entries (*_pin(s): *-pin(s)
and pmx_*: pmx-*) with a vast majority of files using the former:

$ grep _pin arch/arm/boot/dts/armada-*.dts* | wc -l
155
$ grep pmx arch/arm/boot/dts/armada-*.dts* | wc -l
13

In fact, only some Armada XP files are using the second variant.
This patch normalizes those files (mainly ge0/1 entries) to use
the first variant.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Link: https://lkml.kernel.org/r/00114c3169e1d93259ff4150ed46ee36eae16b1e.1416670812.git.arno@natisbad.org


Signed-off-by: Jason Cooper <jason@lakedaemon.net>

While renaming pinctrl entries during reviews of Synology DS414 support
series, I missed three entries, as reported by Ben. This patch fixes
those.

Reported-by: Ben Peddell <klightspeed@killerwolves.net>
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Link: https://lkml.kernel.org/r/608e4fd6e06e9c5289a84b9c38e81b2456dbcd79.1416670812.git.arno@natisbad.org


Signed-off-by: Jason Cooper <jason@lakedaemon.net>

this patch adds missed resets property for CSR SiRFatlasVI SPI nodes.

Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>