Pull x86 Kconfig fix from Borislav Petkov:

 - Correct Kconfig symbol visibility on x86

* tag 'x86_build_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/Kconfig: Select ARCH_SELECT_MEMORY_MODEL only if FLATMEM and SPARSEMEM are possible

Pull misc x86 updates from Borislav Petkov:

 - Add support for a couple new insn sets to the insn decoder:
   AVX512-FP16, AMX, other misc insns.

 - Update VMware-specific MAINTAINERS entries

* tag 'x86_misc_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  MAINTAINERS: Mark VMware mailing list entries as email aliases
  MAINTAINERS: Add Zack as maintainer of vmmouse driver
  MAINTAINERS: Update maintainers for paravirt ops and VMware hypervisor interface
  x86/insn: Add AVX512-FP16 instructions to the x86 instruction decoder
  perf/tests: Add AVX512-FP16 instructions to x86 instruction decoder test
  x86/insn: Add misc instructions to x86 instruction decoder
  perf/tests: Add misc instructions to the x86 instruction decoder test
  x86/insn: Add AMX instructions to the x86 instruction decoder
  perf/tests: Add AMX instructions to x86 instruction decoder test

Pull x86 cpu feature updates from Borislav Petkov:

 - Merge the AMD and Intel PPIN code into a shared one by both vendors.
   Add the PPIN number to sysfs so that sockets can be identified when
   replacement is needed

 - Minor fixes and cleanups

* tag 'x86_cpu_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Clear SME feature flag when not in use
  x86/cpufeatures: Put the AMX macros in the word 18 block
  topology/sysfs: Add PPIN in sysfs under cpu topology
  topology/sysfs: Add format parameter to macro defining "show" functions for proc
  x86/cpu: Read/save PPIN MSR during initialization
  x86/cpu: X86_FEATURE_INTEL_PPIN finally has a CPUID bit
  x86/cpu: Merge Intel and AMD ppin_init() functions
  x86/CPU/AMD: Use default_groups in kobj_type

Pull EDAC updates from Borislav Petkov:

 - Add support for newer AMD family 0x19, models 0x10-... CPUs to
   amd64_edac

 - The usual amount of improvements and fixes

* tag 'edac_updates_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/altera: Add SDRAM ECC check for U-Boot
  EDAC/amd64: Add new register offset support and related changes
  EDAC/amd64: Set memory type per DIMM
  EDAC/mc: Remove unnecessary cast to char * in edac_align_ptr()
  EDAC: Use default_groups in kobj_type
  EDAC: Use proper list of struct attribute for attributes

Pull m68k updates from Geert Uytterhoeven:

 - Fix frame buffers backed by deferred I/O

 - defconfig updates

 - Minor fixes and improvements

* tag 'm68k-for-v5.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: defconfig: Disable fbdev on Sun3/3x
  m68k: defconfig: Update defconfigs for v5.17-rc3
  m68k: mm: Remove check for VM_IO to fix deferred I/O
  m68k: Add asm/config.h

Pull ARM updates from Russell King:

 - amba bus cleanups

 - conversion to use reserve_initrd_mem()

 - remove -nostdlib from vdso link

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9181/1: vdso: remove -nostdlib compiler flag
  ARM: 9175/1: Convert to reserve_initrd_mem()
  ARM: 9174/1: amba: Move EXPORT_SYMBOL() closer to definition
  ARM: 9173/1: amba: kill amba_find_match()
  ARM: 9172/1: amba: Cleanup amba pclk operation

Pull arm64 updates from Will Deacon:

 - Support for including MTE tags in ELF coredumps

 - Instruction encoder updates, including fixes to 64-bit immediate
   generation and support for the LSE atomic instructions

 - Improvements to kselftests for MTE and fpsimd

 - Symbol aliasing and linker script cleanups

 - Reduce instruction cache maintenance performed for user mappings
   created using contiguous PTEs

 - Support for the new "asymmetric" MTE mode, where stores are checked
   asynchronously but loads are checked synchronously

 - Support for the latest pointer authentication algorithm ("QARMA3")

 - Support for the DDR PMU present in the Marvell CN10K platform

 - Support for the CPU PMU present in the Apple M1 platform

 - Use the RNDR instruction for arch_get_random_{int,long}()

 - Update our copy of the Arm optimised string routines for str{n}cmp()

 - Fix signal frame generation for CPUs which have foolishly elected to
   avoid building in support for the fpsimd instructions

 - Workaround for Marvell GICv3 erratum #38545

 - Clarification to our Documentation (booting reqs. and MTE prctl())

 - Miscellanous cleanups and minor fixes

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits)
  docs: sysfs-devices-system-cpu: document "asymm" value for mte_tcf_preferred
  arm64/mte: Remove asymmetric mode from the prctl() interface
  arm64: Add cavium_erratum_23154_cpus missing sentinel
  perf/marvell: Fix !CONFIG_OF build for CN10K DDR PMU driver
  arm64: mm: Drop 'const' from conditional arm64_dma_phys_limit definition
  Documentation: vmcoreinfo: Fix htmldocs warning
  kasan: fix a missing header include of static_keys.h
  drivers/perf: Add Apple icestorm/firestorm CPU PMU driver
  drivers/perf: arm_pmu: Handle 47 bit counters
  arm64: perf: Consistently make all event numbers as 16-bits
  arm64: perf: Expose some Armv9 common events under sysfs
  perf/marvell: cn10k DDR perf event core ownership
  perf/marvell: cn10k DDR perfmon event overflow handling
  perf/marvell: CN10k DDR performance monitor support
  dt-bindings: perf: marvell: cn10k ddr performance monitor
  arm64: clean up tools Makefile
  perf/arm-cmn: Update watchpoint format
  perf/arm-cmn: Hide XP PUB events for CMN-600
  arm64: drop unused includes of <linux/personality.h>
  arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones
  ...

Pull tpm updates from Jarkko Sakkinen:
 "In order to split the work a bit we've aligned with David Howells more
  or less that I take more hardware/firmware aligned keyring patches,
  and he takes care more of the framework aligned patches.

  For TPM the patches worth of highlighting are the fixes for
  refcounting provided by Lino Sanfilippo and James Bottomley.

  Eric B. has done a bunch obvious (but important) fixes but there's one
  a bit controversial: removal of asym_tpm. It was added in 2018 when
  TPM1 was already declared as insecure and world had moved on to TPM2.
  I don't know how this has passed all the filters but I did not have a
  chance to see the patches when they were out. I simply cannot commit
  to maintaining this because it was from all angles just wrong to take
  it in the first place to the mainline kernel. Nobody should use this
  module really for anything.

  Finally, there is a new keyring '.machine' to hold MOK keys ('Machine
  Owner Keys'). In the mok side MokListTrustedRT UEFI variable can be
  set, from which kernel knows that MOK keys are kernel trusted keys and
  they are populated to the machine keyring. This keyring linked to the
  secondary trusted keyring, which means that can be used like any
  kernel trusted keys. This keyring of course can be used to hold other
  MOK'ish keys in other platforms in future"

* tag 'tpmdd-next-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: (24 commits)
  tpm: use try_get_ops() in tpm-space.c
  KEYS: asymmetric: properly validate hash_algo and encoding
  KEYS: asymmetric: enforce that sig algo matches key algo
  KEYS: remove support for asym_tpm keys
  tpm: fix reference counting for struct tpm_chip
  integrity: Only use machine keyring when uefi_check_trust_mok_keys is true
  integrity: Trust MOK keys if MokListTrustedRT found
  efi/mokvar: move up init order
  KEYS: Introduce link restriction for machine keys
  KEYS: store reference to machine keyring
  integrity: add new keyring handler for mok keys
  integrity: Introduce a Linux keyring called machine
  integrity: Fix warning about missing prototypes
  KEYS: trusted: Avoid calling null function trusted_key_exit
  KEYS: trusted: Fix trusted key backends when building as module
  tpm: xen-tpmfront: Use struct_size() helper
  KEYS: x509: remove dead code that set ->unsupported_sig
  KEYS: x509: remove never-set ->unsupported_key flag
  KEYS: x509: remove unused fields
  KEYS: x509: clearly distinguish between key and signature algorithms
  ...

Signed-off-by: Borislav Petkov <bp@suse.de>

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull kvm fix from Paolo Bonzini:
 "Fix for the SLS mitigation, which makes a 'SETcc/RET' pair grow
  to 'SETcc/RET/INT3'.

  This doesn't fit in 4 bytes any more, so the alignment has to
  change to 8 for this case"

* tag 'for-linus-5.17' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm/emulate: Fix SETcc emulation function offsets with SLS

Pull input fixes from Dmitry Torokhov:
 "Two driver fixes:

   - a fix for zinitix touchscreen to properly report contacts

   - a fix for aiptek tablet driver to be more resilient to devices with
     incorrect descriptors"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: aiptek - properly check endpoint type
  Input: zinitix - do not report shadow fingers

The commit in Fixes started adding INT3 after RETs as a mitigation
against straight-line speculation.

The fastop SETcc implementation in kvm's insn emulator uses macro magic
to generate all possible SETcc functions and to jump to them when
emulating the respective instruction.

However, it hardcodes the size and alignment of those functions to 4: a
three-byte SETcc insn and a single-byte RET. BUT, with SLS, there's an
INT3 that gets slapped after the RET, which brings the whole scheme out
of alignment:

  15:   0f 90 c0                seto   %al
  18:   c3                      ret
  19:   cc                      int3
  1a:   0f 1f 00                nopl   (%rax)
  1d:   0f 91 c0                setno  %al
  20:   c3                      ret
  21:   cc                      int3
  22:   0f 1f 00                nopl   (%rax)
  25:   0f 92 c0                setb   %al
  28:   c3                      ret
  29:   cc                      int3

and this explodes like this:

  int3: 0000 [#1] PREEMPT SMP PTI
  CPU: 0 PID: 2435 Comm: qemu-system-x86 Not tainted 5.17.0-rc8-sls #1
  Hardware name: Dell Inc. Precision WorkStation T3400  /0TP412, BIOS A14 04/30/2012
  RIP: 0010:setc+0x5/0x8 [kvm]
  Code: 00 00 0f 1f 00 0f b6 05 43 24 06 00 c3 cc 0f 1f 80 00 00 00 00 0f 90 c0 c3 cc 0f \
	  1f 00 0f 91 c0 c3 cc 0f 1f 00 0f 92 c0 c3 cc <0f> 1f 00 0f 93 c0 c3 cc 0f 1f 00 \
	  0f 94 c0 c3 cc 0f 1f 00 0f 95 c0
  Call Trace:
   <TASK>
   ? x86_emulate_insn [kvm]
   ? x86_emulate_instruction [kvm]
   ? vmx_handle_exit [kvm_intel]
   ? kvm_arch_vcpu_ioctl_run [kvm]
   ? kvm_vcpu_ioctl [kvm]
   ? __x64_sys_ioctl
   ? do_syscall_64
   ? entry_SYSCALL_64_after_hwframe
   </TASK>

Raise the alignment value when SLS is enabled and use a macro for that
instead of hard-coding naked numbers.

Fixes: e463a09a

 ("x86: Add straight-line-speculation mitigation")
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Jamie Heilman <jamie@audible.transient.net>
Link: https://lore.kernel.org/r/YjGzJwjrvxg5YZ0Z@audible.transient.net


[Add a comment and a bit of safety checking, since this is going to be changed
 again for IBT support. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull ARM SoC fix from Arnd Bergmann:
 "Here is one last regression fix for 5.17, reverting a patch that went
  into 5.16 as a cleanup that ended up breaking external interrupts on
  Layerscape chips.

  The revert makes it work again, but also reintroduces a build time
  warning about the nonstandard DT binding that will have to be dealt
  with in the future"

* tag 'soc-fixes-5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  Revert "arm64: dts: freescale: Fix 'interrupt-map' parent address cells"

Pull SCSI fixes from James Bottomley:
 "Two small(ish) fixes, both in drivers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: fnic: Finish scsi_cmnd before dropping the spinlock
  scsi: mpt3sas: Page fault in reply q processing

Merge tag 'perf-tools-fixes-for-v5.17-2022-03-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Avoid iterating empty evlist, fixing a segfault with 'perf stat --null'

 - Ignore case in topdown.slots check, fixing issue with Intel Icelake
   JSON metrics.

 - Fix symbol size calculation condition for fixing up corner case
   symbol end address obtained from Kallsyms.

* tag 'perf-tools-fixes-for-v5.17-2022-03-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf parse-events: Ignore case in topdown.slots check
  perf evlist: Avoid iteration for empty evlist.
  perf symbols: Fix symbol size calculation condition

Pull char/misc driver fix from Greg KH:
 "Here is a single driver fix for 5.17-final that has been submitted
  many times but I somehow missed it in my patch queue:

   - fix for counter sysfs code for reported problem

  This has been in linux-next all week with no reported issues"

* tag 'char-misc-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  counter: Stop using dev_get_drvdata() to get the counter device

Pull USB fixes from Greg KH:
 "Here are some small remaining USB fixes for 5.17-final.

  They include:

   - two USB gadget driver fixes for reported problems

   - usbtmc driver fix for syzbot found issues

   - musb patch partial revert to resolve a reported regression.

  All of these have been in linux-next this week with no reported
  problems"

* tag 'usb-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: Fix use-after-free bug by not setting udc->dev.driver
  usb: usbtmc: Fix bug in pipe direction for control transfers
  partially Revert "usb: musb: Set the DT node on the child device"
  usb: gadget: rndis: prevent integer overflow in rndis_set_response()

An issue with icelakex metrics:

  https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/perf/pmu-events/arch/x86/icelakex/icx-metrics.json?h=perf/core&id=65eab2bc7dab326ee892ec5a4c749470b368b51a#n48

That causes the slots not to be first.

Fixes: 94dbfd67

 ("perf parse-events: Architecture specific leader override")
Reported-by: Caleb Biggers <caleb.biggers@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220317224309.543736-1-irogers@google.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

As seen with 'perf stat --null ..' and reported in:
https://lore.kernel.org/lkml/YjCLcpcX2peeQVCH@kernel.org/

v2. Avoids setting evsel in the empty list case as suggested by Jiri Olsa.

    Committer testing:

Before:

  $  perf stat --null sleep 1
  Segmentation fault (core dumped)
  $

After:

  $  perf stat --null sleep 1

   Performance counter stats for 'sleep 1':

         1.010340646 seconds time elapsed

         0.001420000 seconds user
         0.000000000 seconds sys
  $

Fixes: 472832d2

 ("perf evlist: Refactor evlist__for_each_cpu()")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220317231643.550902-1-irogers@google.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Before this patch, the symbol end address fixup to be called, needed two
conditions being met:

  if (prev->end == prev->start && prev->end != curr->start)

Where
  "prev->end == prev->start" means that prev is zero-long
                             (and thus needs a fixup)
and
  "prev->end != curr->start" means that fixup hasn't been applied yet

However, this logic is incorrect in the following situation:

*curr  = {rb_node = {__rb_parent_color = 278218928,
  rb_right = 0x0, rb_left = 0x0},
  start = 0xc000000000062354,
  end = 0xc000000000062354, namelen = 40, type = 2 '\002',
  binding = 0 '\000', idle = 0 '\000', ignore = 0 '\000',
  inlined = 0 '\000', arch_sym = 0 '\000', annotate2 = false,
  name = 0x1159739e "kprobe_optinsn_page\t[__builtin__kprobes]"}

*prev = {rb_node = {__rb_parent_color = 278219041,
  rb_right = 0x109548b0, rb_left = 0x109547c0},
  start = 0xc000000000062354,
  end = 0xc000000000062354, namelen = 12, type = 2 '\002',
  binding = 1 '\001', idle = 0 '\000', ignore = 0 '\000',
  inlined = 0 '\000', arch_sym = 0 '\000', annotate2 = false,
  name = 0x1095486e "optinsn_slot"}

In this case, prev->start == prev->end == curr->start == curr->end,
thus the condition above thinks that "we need a fixup due to zero
length of prev symbol, but it has been probably done, since the
prev->end == curr->start", which is wrong.

After the patch, the execution path proceeds to arch__symbols__fixup_end
function which fixes up the size of prev symbol by adding page_size to
its end offset.

Fixes: 3b01a413

 ("perf symbols: Improve kallsyms symbol end addr calculation")
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20220317135536.805-1-mpetlan@redhat.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull arm64 fixes from Catalin Marinas:
 "Fix two compiler warnings introduced by recent commits: pointer
  arithmetic and double initialisation of struct field"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: errata: avoid duplicate field initializer
  arm64: fix clang warning about TRAMP_VALIAS

Pull cifs fix from Steve French:
 "Small fix for regression in multiuser mounts.

  The additional improvements suggested by Ronnie to make the server and
  session status handling code easier to read can wait for the 5.18
  merge window."

* tag '5.17-rc8-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: fix incorrect session setup check for multiuser mounts

Pull block fixes from Jens Axboe:

 - Revert of a nvme target feature (Hannes)

 - Fix a memory leak with rq-qos (Ming)

* tag 'block-5.17-2022-03-18' of git://git.kernel.dk/linux-block:
  nvmet: revert "nvmet: make discovery NQN configurable"
  block: release rq qos structures for queue without disk

Pull drm fixes from Dave Airlie:
 "A few minor changes to finish things off, one mgag200 regression, imx
  fix and couple of panel changes.

  imx:
   - Don't test bus flags in atomic check

  mgag200:
   - Fix PLL setup on some models

  panel:
   - Fix bpp settings on Innolux G070Y2-L01
   - Fix DRM_PANEL_EDP Kconfig dependencies"

* tag 'drm-fixes-2022-03-18' of git://anongit.freedesktop.org/drm/drm:
  drm: Don't make DRM_PANEL_BRIDGE dependent on DRM_KMS_HELPERS
  drm/panel: simple: Fix Innolux G070Y2-L01 BPP settings
  drm/imx: parallel-display: Remove bus flags check in imx_pd_bridge_atomic_check()
  drm/mgag200: Fix PLL setup for g200wb and g200ew

The '.type' field is initialized both in place and in the macro
as reported by this W=1 warning:

arch/arm64/include/asm/cpufeature.h:281:9: error: initialized field overwritten [-Werror=override-init]
  281 |         (ARM64_CPUCAP_SCOPE_LOCAL_CPU | ARM64_CPUCAP_OPTIONAL_FOR_LATE_CPU)
      |         ^
arch/arm64/kernel/cpu_errata.c:136:17: note: in expansion of macro 'ARM64_CPUCAP_LOCAL_CPU_ERRATUM'
  136 |         .type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,                         \
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm64/kernel/cpu_errata.c:145:9: note: in expansion of macro 'ERRATA_MIDR_RANGE'
  145 |         ERRATA_MIDR_RANGE(m, var, r_min, var, r_max)
      |         ^~~~~~~~~~~~~~~~~
arch/arm64/kernel/cpu_errata.c:613:17: note: in expansion of macro 'ERRATA_MIDR_REV_RANGE'
  613 |                 ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 2),
      |                 ^~~~~~~~~~~~~~~~~~~~~
arch/arm64/include/asm/cpufeature.h:281:9: note: (near initialization for 'arm64_errata[18].type')
  281 |         (ARM64_CPUCAP_SCOPE_LOCAL_CPU | ARM64_CPUCAP_OPTIONAL_FOR_LATE_CPU)
      |         ^

Remove the extranous initializer.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 1dd498e5 ("KVM: arm64: Workaround Cortex-A510's single-step and PAC trap errata")
Link: https://lore.kernel.org/r/20220316183800.1546731-1-arnd@kernel.org


Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The newly introduced TRAMP_VALIAS definition causes a build warning
with clang-14:

arch/arm64/include/asm/vectors.h:66:31: error: arithmetic on a null pointer treated as a cast from integer to pointer is a GNU extension [-Werror,-Wnull-pointer-arithmetic]
                return (char *)TRAMP_VALIAS + SZ_2K * slot;

Change the addition to something clang does not complain about.

Fixes: bd09128d

 ("arm64: Add percpu vectors for EL1")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220316183833.1563139-1-arnd@kernel.org


Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

 * drm/imx: Don't test bus flags in atomic check
 * drm/mgag200: Fix PLL setup on some models
 * drm/panel: Fix bpp settings on Innolux G070Y2-L01; Fix DRM_PANEL_EDP
   Kconfig dependencies

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YjMNcqOuDFDoe+EN@linux-uq9g

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, ipsec, and wireless.

  A few last minute revert / disable and fix patches came down from our
  sub-trees. We're not waiting for any fixes at this point.

  Current release - regressions:

   - Revert "netfilter: nat: force port remap to prevent shadowing
     well-known ports", restore working conntrack on asymmetric paths

   - Revert "ath10k: drop beacon and probe response which leak from
     other channel", restore working AP and mesh mode on QCA9984

   - eth: intel: fix hang during reboot/shutdown

  Current release - new code bugs:

   - netfilter: nf_tables: disable register tracking, it needs more work
     to cover all corner cases

  Previous releases - regressions:

   - ipv6: fix skb_over_panic in __ip6_append_data when (admin-only)
     extension headers get specified

   - esp6: fix ESP over TCP/UDP, interpret ipv6_skip_exthdr's return
     value more selectively

   - bnx2x: fix driver load failure when FW not present in initrd

  Previous releases - always broken:

   - vsock: stop destroying unrelated sockets in nested virtualization

   - packet: fix slab-out-of-bounds access in packet_recvmsg()

  Misc:

   - add Paolo Abeni to networking maintainers!"

* tag 'net-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (26 commits)
  iavf: Fix hang during reboot/shutdown
  net: mscc: ocelot: fix backwards compatibility with single-chain tc-flower offload
  net: bcmgenet: skip invalid partial checksums
  bnx2x: fix built-in kernel driver load failure
  net: phy: mscc: Add MODULE_FIRMWARE macros
  net: dsa: Add missing of_node_put() in dsa_port_parse_of
  net: handle ARPHRD_PIMREG in dev_is_mac_header_xmit()
  Revert "ath10k: drop beacon and probe response which leak from other channel"
  hv_netvsc: Add check for kvmalloc_array
  iavf: Fix double free in iavf_reset_task
  ice: destroy flow director filter mutex after releasing VSIs
  ice: fix NULL pointer dereference in ice_update_vsi_tx_ring_stats()
  Add Paolo Abeni to networking maintainers
  atm: eni: Add check for dma_map_single
  net/packet: fix slab-out-of-bounds access in packet_recvmsg()
  net: mdio: mscc-miim: fix duplicate debugfs entry
  net: phy: marvell: Fix invalid comparison in the resume and suspend functions
  esp6: fix check on ipv6_skip_exthdr's return value
  net: dsa: microchip: add spi_device_id tables
  netfilter: nf_tables: disable register tracking
  ...

Pull ACPI fix from Rafael Wysocki:
 "Revert recent commit that caused multiple systems to misbehave due to
  firmware issues"

* tag 'acpi-5.17-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPI: scan: Do not add device IDs from _CID if _HID is not valid"

Merge misc fixes from Andrew Morton:
 "Four patches.

  Subsystems affected by this patch series: mm/swap, kconfig, ocfs2, and
  selftests"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  selftests: vm: fix clang build error multiple output files
  ocfs2: fix crash when initialize filecheck kobj fails
  configs/debug: restore DEBUG_INFO=y for overriding
  mm: swap: get rid of livelock in swapin readahead

When building the vm selftests using clang, some errors are seen due to
having headers in the compilation command:

  clang -Wall -I ../../../../usr/include  -no-pie    gup_test.c ../../../../mm/gup_test.h -lrt -lpthread -o .../tools/testing/selftests/vm/gup_test
  clang: error: cannot specify -o when generating multiple output files
  make[1]: *** [../lib.mk:146: .../tools/testing/selftests/vm/gup_test] Error 1

Rework to add the header files to LOCAL_HDRS before including ../lib.mk,
since the dependency is evaluated in '$(OUTPUT)/%:%.c $(LOCAL_HDRS)' in
file lib.mk.

Link: https://lkml.kernel.org/r/20220304000645.1888133-1-yosryahmed@google.com


Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Once s_root is set, genric_shutdown_super() will be called if
fill_super() fails.  That means, we will call ocfs2_dismount_volume()
twice in such case, which can lead to kernel crash.

Fix this issue by initializing filecheck kobj before setting s_root.

Link: https://lkml.kernel.org/r/20220310081930.86305-1-joseph.qi@linux.alibaba.com
Fixes: 5f483c4a

 ("ocfs2: add kobject for online file check")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Previously, I failed to realize that Kees' patch [1] has not been merged
into the mainline yet, and dropped DEBUG_INFO=y too eagerly from the
mainline.  As the results, "make debug.config" won't be able to flip
DEBUG_INFO=n from the existing .config.  This should close the gaps of a
few weeks before Kees' patch is there, and work regardless of their
merging status anyway.

Link: https://lore.kernel.org/all/20220125075126.891825-1-keescook@chromium.org/ [1]
Link: https://lkml.kernel.org/r/20220308153524.8618-1-quic_qiancai@quicinc.com


Signed-off-by: Qian Cai <quic_qiancai@quicinc.com>
Reported-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In our testing, a livelock task was found.  Through sysrq printing, same
stack was found every time, as follows:

  __swap_duplicate+0x58/0x1a0
  swapcache_prepare+0x24/0x30
  __read_swap_cache_async+0xac/0x220
  read_swap_cache_async+0x58/0xa0
  swapin_readahead+0x24c/0x628
  do_swap_page+0x374/0x8a0
  __handle_mm_fault+0x598/0xd60
  handle_mm_fault+0x114/0x200
  do_page_fault+0x148/0x4d0
  do_translation_fault+0xb0/0xd4
  do_mem_abort+0x50/0xb0

The reason for the livelock is that swapcache_prepare() always returns
EEXIST, indicating that SWAP_HAS_CACHE has not been cleared, so that it
cannot jump out of the loop.  We suspect that the task that clears the
SWAP_HAS_CACHE flag never gets a chance to run.  We try to lower the
priority of the task stuck in a livelock so that the task that clears
the SWAP_HAS_CACHE flag will run.  The results show that the system
returns to normal after the priority is lowered.

In our testing, multiple real-time tasks are bound to the same core, and
the task in the livelock is the highest priority task of the core, so
the livelocked task cannot be preempted.

Although cond_resched() is used by __read_swap_cache_async, it is an
empty function in the preemptive system and cannot achieve the purpose
of releasing the CPU.  A high-priority task cannot release the CPU
unless preempted by a higher-priority task.  But when this task is
already the highest priority task on this core, other tasks will not be
able to be scheduled.  So we think we should replace cond_resched() with
schedule_timeout_uninterruptible(1), schedule_timeout_interruptible will
call set_current_state first to set the task state, so the task will be
removed from the running queue, so as to achieve the purpose of giving
up the CPU and prevent it from running in kernel mode for too long.

(akpm: ugly hack becomes uglier.  But it fixes the issue in a
backportable-to-stable fashion while we hopefully work on something
better)

Link: https://lkml.kernel.org/r/20220221111749.1928222-1-cgel.zte@gmail.com


Signed-off-by: Guo Ziliang <guo.ziliang@zte.com.cn>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Reviewed-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Reviewed-by: Jiang Xuexin <jiang.xuexin@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roger Quadros <rogerq@kernel.org>
Cc: Ziliang Guo <guo.ziliang@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Recent commit 97457801 ("iavf: Add waiting so the port is
initialized in remove") adds a wait-loop at the beginning of
iavf_remove() to ensure that port initialization is finished
prior unregistering net device. This causes a regression
in reboot/shutdown scenario because in this case callback
iavf_shutdown() is called and this callback detaches the device,
makes it down if it is running and sets its state to __IAVF_REMOVE.
Later shutdown callback of associated PF driver (e.g. ice_shutdown)
is called. That callback calls among other things sriov_disable()
that calls indirectly iavf_remove() (see stack trace below).
As the adapter state is already __IAVF_REMOVE then the mentioned
loop is end-less and shutdown process hangs.

The patch fixes this by checking adapter's state at the beginning
of iavf_remove() and skips the rest of the function if the adapter
is already in remove state (shutdown is in progress).

Reproducer:
1. Create VF on PF driven by ice or i40e driver
2. Ensure that the VF is bound to iavf driver
3. Reboot

[52625.981294] sysrq: SysRq : Show Blocked State
[52625.988377] task:reboot          state:D stack:    0 pid:17359 ppid:     1 f2
[52625.996732] Call Trace:
[52625.999187]  __schedule+0x2d1/0x830
[52626.007400]  schedule+0x35/0xa0
[52626.010545]  schedule_hrtimeout_range_clock+0x83/0x100
[52626.020046]  usleep_range+0x5b/0x80
[52626.023540]  iavf_remove+0x63/0x5b0 [iavf]
[52626.027645]  pci_device_remove+0x3b/0xc0
[52626.031572]  device_release_driver_internal+0x103/0x1f0
[52626.036805]  pci_stop_bus_device+0x72/0xa0
[52626.040904]  pci_stop_and_remove_bus_device+0xe/0x20
[52626.045870]  pci_iov_remove_virtfn+0xba/0x120
[52626.050232]  sriov_disable+0x2f/0xe0
[52626.053813]  ice_free_vfs+0x7c/0x340 [ice]
[52626.057946]  ice_remove+0x220/0x240 [ice]
[52626.061967]  ice_shutdown+0x16/0x50 [ice]
[52626.065987]  pci_device_shutdown+0x34/0x60
[52626.070086]  device_shutdown+0x165/0x1c5
[52626.074011]  kernel_restart+0xe/0x30
[52626.077593]  __do_sys_reboot+0x1d2/0x210
[52626.093815]  do_syscall_64+0x5b/0x1a0
[52626.097483]  entry_SYSCALL_64_after_hwframe+0x65/0xca

Fixes: 97457801

 ("iavf: Add waiting so the port is initialized in remove")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://lore.kernel.org/r/20220317104524.2802848-1-ivecera@redhat.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ACL rules can be offloaded to VCAP IS2 either through chain 0, or, since
the blamed commit, through a chain index whose number encodes a specific
PAG (Policy Action Group) and lookup number.

The chain number is translated through ocelot_chain_to_pag() into a PAG,
and through ocelot_chain_to_lookup() into a lookup number.

The problem with the blamed commit is that the above 2 functions don't
have special treatment for chain 0. So ocelot_chain_to_pag(0) returns
filter->pag = 224, which is in fact -32, but the "pag" field is an u8.

So we end up programming the hardware with VCAP IS2 entries having a PAG
of 224. But the way in which the PAG works is that it defines a subset
of VCAP IS2 filters which should match on a packet. The default PAG is
0, and previous VCAP IS1 rules (which we offload using 'goto') can
modify it. So basically, we are installing filters with a PAG on which
no packet will ever match. This is the hardware equivalent of adding
filters to a chain which has no 'goto' to it.

Restore the previous functionality by making ACL filters offloaded to
chain 0 go to PAG 0 and lookup number 0. The choice of PAG is clearly
correct, but the choice of lookup number isn't "as before" (which was to
leave the lookup a "don't care"). However, lookup 0 should be fine,
since even though there are ACL actions (policers) which have a
requirement to be used in a specific lookup, that lookup is 0.

Fixes: 226e9cd8

 ("net: mscc: ocelot: only install TCAM entries into a specific lookup and PAG")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220316192117.2568261-1-vladimir.oltean@nxp.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The RXCHK block will return a partial checksum of 0 if it encounters
a problem while receiving a packet. Since a 1's complement sum can
only produce this result if no bits are set in the received data
stream it is fair to treat it as an invalid partial checksum and
not pass it up the stack.

Fixes: 81015539

 ("net: bcmgenet: use CHECKSUM_COMPLETE for NETIF_F_RXCSUM")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220317012812.1313196-1-opendmb@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit b7a49f73 ("bnx2x: Utilize firmware 7.13.21.0")
added request_firmware() logic in probe() which caused
load failure when firmware file is not present in initrd (below),
as access to firmware file is not feasible during probe.

  Direct firmware load for bnx2x/bnx2x-e2-7.13.15.0.fw failed with error -2
  Direct firmware load for bnx2x/bnx2x-e2-7.13.21.0.fw failed with error -2

This patch fixes this issue by -

1. Removing request_firmware() logic from the probe()
   such that .ndo_open() handle it as it used to handle
   it earlier

2. Given request_firmware() is removed from probe(), so
   driver has to relax FW version comparisons a bit against
   the already loaded FW version (by some other PFs of same
   adapter) to allow different compatible/close enough FWs with which
   multiple PFs may run with (in different environments), as the
   given PF who is in probe flow has no idea now with which firmware
   file version it is going to initialize the device in ndo_open()

Link: https://lore.kernel.org/all/46f2d9d9-ae7f-b332-ddeb-b59802be2bab@molgen.mpg.de/


Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Fixes: b7a49f73

 ("bnx2x: Utilize firmware 7.13.21.0")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20220316214613.6884-1-manishc@marvell.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The driver requires firmware so define MODULE_FIRMWARE so that modinfo
provides the details.

Fixes: fa164e40

 ("net: phy: mscc: split the driver into separate files")
Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Link: https://lore.kernel.org/r/20220316151835.88765-1-juergh@canonical.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>