commit dcf9a03b

 (ARM: multi_v7_defconfig: Enable PMIC and MUIC
drivers for exynos) mistakenly added an duplicate line for
CONFIG_COMMON_CLK_QCOM=y.  Remove it.

Signed-off-by: Kevin Hilman <khilman@linaro.org>

Merge tag 'omap-for-v4.2/o2_dc' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig

Few omap2plus_defconfig changes for v4.2 merge window:

- Enable dm9000 as built-in for NFSroot

- Enable dm816x USB phy as a loadable module

- Enable Pixcir touch screen as a loadable module

* tag 'omap-for-v4.2/o2_dc' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: omap2plus_defconfig: Enable TOUCHSCREEN_PIXCIR
  ARM: omap2plus_defconfig: Add dm816x USB PHY as a loadable module
  ARM: omap2plus_defconifg: Enable DM9000 in omap2plus_defconfig

Enable the Exynos DSI and S6E8AA0 panel for full X11 display on Trats2.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>

Merge tag 'samsung-defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/defconfig

exynos_defconfig updates for v4.2

- enable DRM_EXYNOS_DSI and DRM_PANEL_S6E8AA0
  for full X11 display on Trats2 board
- enable SENSORS_PWM_FAN
  to control fan power on Odroid-XU3 board
- enable SENSORS_INA2XX
  for power monitor sensor on Odriod-XU3 board
- do savedefconfig
  to remove useless configs and check its dependencies

* tag 'samsung-defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: exynos_defconfig: Enable CONFIG_SENSORS_INA2XX for Odroid-XU3
  ARM: exynos_defconfig: Enable CONFIG_SENSORS_PWM_FAN for Odroid-XU3
  ARM: exynos_defconfig: savedefconfig
  ARM: exynos_defconfig: Enable display on Trats2 board

The Juno board, and likely many other boards, likes to use simple
GPIO keys for input events. Enabled this in the default
ARM64 defconfig.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>

Enable netcp driver in defconfig for keystone SoCs.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>

Odroid-XU3 board support power monitor sensor.

Below is the output of boot log.
[    3.241438] ina2xx 0-0040: power monitor ina231 (Rshunt = 10000 uOhm)
[    3.248068] ina2xx 0-0041: power monitor ina231 (Rshunt = 10000 uOhm)
[    3.254724] ina2xx 0-0044: power monitor ina231 (Rshunt = 10000 uOhm)
[    3.261354] ina2xx 0-0045: power monitor ina231 (Rshunt = 10000 uOhm)

ina231-i2c-0-40
Adapter: s3c2410-i2c
in0:          +0.00 V
in1:          +1.01 V
power1:      175.00 mW
curr1:        +0.18 A

ina231-i2c-0-41
Adapter: s3c2410-i2c
in0:          +0.00 V
in1:          +1.21 V
power1:       50.00 mW
curr1:        +0.04 A

ina231-i2c-0-44
Adapter: s3c2410-i2c
in0:          +0.00 V
in1:          +1.02 V
power1:       50.00 mW
curr1:        +0.04 A

ina231-i2c-0-45
Adapter: s3c2410-i2c
in0:          +0.00 V
in1:          +1.04 V
power1:       75.00 mW
curr1:        +0.07 A

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

Enable CONFIG_SENSORS_PWM_FAN on exynos_defconfig to control fan
power on Odroid-XU3.

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

Some of the OMAP based boards e.g. am437x-gp-evm have
the Pixcir touch controller. Enable the related device
driver.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge tag 'imx-defconfig-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig

Merge "The i.MX defconfig updates for 4.2" from Shawn Guo:

 - Enable i.MX7D and LS1021A SoC support
 - Enable support for WL1271 WIFI/BT, SX8654 I2C touchscreen and PCF8523
   RTC, which can be found on Armadeus Systems APF6 and Cubox-i boards.

* tag 'imx-defconfig-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx_v6_v7_defconfig: updates for Armadeus Systems APF6 boards
  ARM: config: imx_v6_v7_defconfig add imx7d support
  ARM: imx_v6_v7_defconfig: Select LS1021A
  ARM: imx_v6_v7_defconfig: Enable RTC PCF8523 support

This is needed for USB on dm816x-evm.

Cc: Bin Liu <binmlist@gmail.com>
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: George Cherian <george.cherian@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This ethernet device is used on devkit8000 board.

Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge tag 'renesas-defconfig2-for-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig

Merge "Second Round of Renesas ARM Based SoC Defconfig Updates for v4.2" from Simon Horman:

* Enable shmobile r8a7778/bockw platform

* tag 'renesas-defconfig2-for-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: multi_v7_defconfig: Enable shmobile r8a7778/bockw platform

Remove the generic 8250 config option so that the LPC18xx
specific option gets picked instead.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Make media support modular to reduce kernel size (-253 KiB):

       text    data     bss     dec     hex   filename
    12451039 1396476  339800 14187315  d87b33 vmlinux.before
    12202692 1387244  338456 13928392  d487c8 vmlinux.after

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Make sound support modular to reduce kernel size (-571 KiB):

       text    data     bss     dec     hex   filename
    12990441 1438820  342552 14771813  e16665 vmlinux.before
    12451039 1396476  339800 14187315  d87b33 vmlinux.after

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-defconfig-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/defconfig

Merge "Qualcomm ARM Based defconfig Updates for v4.2" from Kumar Gala:

* Enable cpuidle for QCOM SoCs in qcom & multi_v7_defconfig

* tag 'qcom-defconfig-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
  ARM: config: multi_v7: Update to enable cpuidle for QCOM SoCs
  ARM: config: Update qcom_defconfig to enable cpuidle

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This patch does 'savedefconfig' for exynos_defconfig to remove useless
configs and check its dependencies. Sometimes some configs could be
ignored because of the dependencies even they are enabled in defconfig
file manually. So checking the dependencies would be better.

Signed-off-by: Kukjin Kim <kgene@kernel.org>

Enable the Exynos DSI and S6E8AA0 panel for full X11 display on Trats2.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

Enable the USB OHCI driver for Exynos SoCs: S5PV210, Exynos4 family,
Exynos5250, Exynos5440 and Exynos542x/5800 family.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enable support for Thermal Monitoring Unit present on Exynos SoCs. This
allows detection of overheat and handling this gracefully.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enable drivers for PMICs and MUICs present on Exynos-based devices:
- max14577: charger, fuel gauge (max17040), regulator,
  used on: Gear 1, Gear 2,
- max77693: charger, fuel gauge (max17042),
  used on: Trats2,
- s5m/s2mps: RTC, clock,
  used on: Arndale, Arndale Octa, Gear 1, Gear 2

This allows full usage of charging stack on these devices along with RTC
and 32 kHz clocks.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
[kgene@kernel.org: savedefconfig]
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Current Exynos CPU idle driver supports entering AFTR (Arm Off, Top
Running) mode on Exynos3250, Exynos4210 (coupled), Exynos4x12 and
Exynos5250. Enable it in default configuration to reduce energy
consumption.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The Cypress All Points Addressable (APA) I2C Trackpad is used in the
Samsung Exynos 5250 Snow Chromebook. Build the driver as a module so
the device is supported.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The I2C GPIO arbitration driver is used on the Exynos5250 Snow Chromebook
to arbitrate the access to a I2C bus by the Application Processor or a EC.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Many Exynos devices have devices attached to their display ports.
This patch enables the needed Kconfig options to support different
configuration such as simple panel, embedded DisplayPort (eDP) to
LVDS bridges and HDMI displays.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[kgene@kernel.org: savedefconfig]
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The rtc-s3c driver supports a range of S3C series Real-Time-Clocks found
on many Samsung SoCs. Build the driver as a module to support these RTC.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Build the Generic PWM Samsung driver as a module to support PWM
devices used in platforms with a Samsung SoC.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enable the needed Kconfig options to have support for the ChromeOS EC
I2C transport, I2C tunnel and chardev user-space interface.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enable the needed kconfig options to have support for Samsung USB 2.0
and USB 3.0 PHY drivers to support the USB PHYs found on Exynos SoCs.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[kgene@kernel.org: savedefconfig]
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The Maxim max77802 Power Management IC is used on many Exynos machines.
Besides a bunch of regulators, this chip has a Real-Time-Clock (RTC)
and 2-channel 32kHz clock outputs.

Enable the kernel config options to have the drivers for these devices
built as a module.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[kgene@kernel.org: removing useless REGULATOR_MAX77802 config]
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Build the spi-s3c64xx driver as a module to have support for
the SPI controller in several Samsung SoCs.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Select ARM_SINGLE_ARMV7M in defconfigs of the converted ARMv7-M
platforms.

[arnd: moved the efm32_defconfig change to the patch that
originally introduces the symbol, to avoid intermittent regression]

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add defconfig for Linux on Vybrid (vf610) on the secondary Cortex-
M4 CPU. The use of a XIP image has been tested which needs to be
loaded (e.g. using the custom m4boot loader) to the end of the
available RAM at address 0x8f000000. The Cortex-M4 has a code-alias
which makes sure that the instructions get fetched through the code
bus (alias starts at 0x00800000 => 0x80800000 in system address).
Hence, to get optimal performance, use 0x0f000000 as XIP_PHYS_ADDR.
This address is additionally shifted by the length of the minimal
loader which is inserted by m4boot. Currently, this offset is 0x80.

The standard DRAM base address is configured to 0x8C000000, which
gives the Cortex-M4 48MiB of RAM.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'at91-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/defconfig

Merge "First batch of defconfig changes for 4.2" from Nicolas Ferre:
- fixed regulators for sd/mmc
- addition of AT91 to the multi_v7_defconfig

* tag 'at91-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: multi_v7_defconfig: Add Atmel SAMA5 family
  ARM: at91/defconfig: add CONFIG_REGULATOR_FIXED_VOLTAGE for mmc driver

Conflicts:
	arch/arm/configs/multi_v7_defconfig

The original stm32 defconfig file looks for a ./rootfs.cpio file,
but that breaks with

  ../scripts/gen_initramfs_list.sh: Cannot open './rootfs.cpio'

when trying to build this kernel. Anybody who relies on the
current behavior should change their build scripts to append
the initramfs manually, as this patch removes that default
in order to help autmatic testing.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>

The original zx defconfig file looks for a ./rootfs.cpio file,
but that breaks with

  scripts/gen_initramfs_list.sh: Cannot open 'initramfs.cpio.gz'

when trying to build this kernel. Anybody who relies on the
current behavior should change their build scripts to append
the initramfs manually, as this patch removes that default
in order to help autmatic testing.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jun Nie <jun.nie@linaro.org>

Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig.

Note that the console will be ttyAT0 instead of the usual ttyS0.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

As an update of the sd/mmc DT definition needs the fixed voltage regulator, add
it to the at91 defconfigs.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>