Delete regulator-compatible usage in mt8135-evbp1.dts.
The regualtor-compatible binding is deprecated, instead the node name
is used.

Mediatek timer driver supports as well mt8127, mt8135 and mt8173. Add
these SOCs to the bindings list.

Power domains venc and venc_lt need clocks two extra clocks to access
their registers. We update the bindings documentation about this.

Update SMP bindings documentation by adding support for mt6589 and mt81xx SOCs.

Update mt8127.dtsi and mt8135.dtsi to enable SMP support.

* tag 'v4.3-next-dts' of https://github.com/mbgg/linux-mediatek

:
  ARM: dts: mt8127: enable basic SMP bringup for mt8127
  ARM: dts: mt8135: enable basic SMP bringup for mt8135
  devicetree: bindings: add new SMP enable method Mediatek SoC
  dt-bindings: soc: Add clocks for Mediatek SCPSYS unit
  dt-bindings: add more MediaTek SoC to mtk-timer binding
  ARM: dts: mt8135-evbp1: remove regulator-compatible usage

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v4.4-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

SPDIF device nodes for the newly added driver.

* tag 'v4.4-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip

:
  ARM: dts: rockchip: Add SPDIF optical out on Radxa Rock2 Square
  ARM: dts: rockchip: Add SPDIF transceiver for RK3288
  ARM: dts: rockchip: Add SPDIF optical out on Radxa Rock
  ARM: dts: rockchip: Add SPDIF transceiver for RK3188

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-dt-for-4.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Allwinner DT changes for 4.4, round 2

More DT patches for 4.4, mostly with new boards coming in (CHIP, BananaPi
M2, pcduino2), further consolidation for the q8-based designs and a bunch
of random patches enhancing support for existing boards

* tag 'sunxi-dt-for-4.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux

: (27 commits)
  ARM: dts: sun6i: Add a dts file for the Sinovoip BPI-M2 board
  ARM: dts: sun6i: Add mmc2_pins_a pinmux setting to sun6i-a31.dtsi
  ARM: dts: sunxi: Fix interrupt-cells for [r]pio on A23/A31/A33/A80
  ARM: dts: sun8i: Add NMI interrupt controller node
  ARM: dts: sun6i: hummingbird: Enable AXP221 DC5LDO regulator as "vdd-cpus"
  ARM: dts: sun6i: hummingbird: Use axp22x.dtsi for AXP221 regulators
  ARM: dts: sun6i: hummingbird: Fix VDD-CPU and VDD-GPU regulator names
  ARM: dts: sun7i: Add regulator configuration for pcDuino v3 Nano
  ARM: dts: sun6i: Turn on gmac on Colombus
  ARM: dts: sun8i: Make et-q8-v1.6.dts a symlink to q8-tablet.dts
  ARM: dts: sun8i: Make ippo-q8h-v*.dts a symlink to q8-tablet.dts
  ARM: dts: sun8i: Add sun8i-a23-q8-tablet.dts file
  ARM: dts: sun5i: Add backlight node to sun5i-q8-common.dtsi
  ARM: dts: sunxi: Enable PWM controller on Q8 format tablets
  ARM: dts: sun5i: Add PWM channel 0 pinmux setting for A13/A10s
  ARM: dts: sun5i: Add PWM controller node for A13 / A10s
  ARM: sun5i: Add C.H.I.P DTS
  ARM: dts: sunxi: Add dtsi for AXP22x PMIC
  ARM: dts: sun7i: Correct USB regulators on pcDuino v3 Nano
  ARM: sun5i: dt: Add UART3 CTS and RTS pins
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

mvebu dt for 4.4 (part 2)

- Add support for severals Armada-370-based Seagate NAS
- Fix Ready NAS device tree
- Modify SDHCI binding for A388-GP allowing using it on old and new
  version of the board

* tag 'mvebu-dt-4.4-2' of git://git.infradead.org/linux-mvebu

:
  ARM: mvebu: set SW polling as SDHCI card detection on A388-GP
  arm: mvebu: reorder nodes under internal-regs by address in RN2120 .dts file
  arm: mvebu: disable unused Armada RTC on ReadyNAS 102, 104 and 2120
  ARM: mvebu: add DT support for Seagate Personal Cloud
  ARM: mvebu: add DT support for Seagate NAS 2 and 4-Bay

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'socfpga_for_v4.4_cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt

SoCFPGA dts cleanup for v4.4
- Re-order DTS nodes into correct alphabetical order

* tag 'socfpga_for_v4.4_cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux

:
  ARM: socfpga: dts: sort nodes alphabetically

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'socfpga_dts_for_v4.4_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt

SoCFPGA DTS update for v4.4, part 2
- Add the FPGA manager node

* tag 'socfpga_dts_for_v4.4_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux

:
  ARM: socfpga: dts: add fpga manager

Signed-off-by: Olof Johansson <olof@lixom.net>

The Sinovoip BPI-M2 is a SBC board based on the A31s SoC it features
1G RAM, a microsd slot, Gbit ethernet, 4 usb-a USB-2 ports, ir receiver,
stereo headphone jack and hdmi video output.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Add a pinmux setting for using mmc2 in regular 4 bit mode.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

When the gpio interrupt bindings where changed to add a bank to the
specifier list, the r_pio nodes of A23/A31/A33 where not updated to
match and neither was the pio node of the A80, this fixes this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The newest revisions of A388-GP (v1.5 and higher) support only
DAT3-based card detection. Revisions < v1.5 based on GPIO detection
via I2C expander, but this solution is supposed to be deprecated on
new boards. In order to satisfy all type of hardware this commit
changes card detection to use software polling mechanism. Also a
comment is added on possible card detection options in A388-GP
DT board file.

Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

The sorting policy for this file is alphabetically.
Reorder all nodes, that are out of place.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>

The NMI interrupt controller is in charge of the NMI pin exposed by
the SoC to the PMIC. The PMIC signals interrupts through this.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Add FPGA manager to device tree for SoCFPGA.

Signed-off-by: Alan Tull <atull@opensource.altera.com>
Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>

Pull "Qualcomm ARM64 Updates for v4.4" from Andy Gross:

* Add RNG device tree node
* Add MSM8x16 serial UART1 node
* Enable eMMC on apq8016-sbc board
* Fix I2C pinconf sleep state function
* Add MSM8916 I2C nodes
* Enable I2C busses on LS and HS on APQ8016-sbc
* Enable SPI busses on LS and HS on APQ8016-sbc

* tag 'qcom-arm64-for-4.4' of git://codeaurora.org/quic/kernel/agross-msm:
  arm64: dts: apq8016-sbc: enable spi buses on LS and HS
  arm64: dts: apq8016-sbc: enable i2c buses on LS and HS
  arm64: dts: qcom: Add msm8916 I2C nodes.
  arm64: dts: fix i2c pinconf sleep state function
  arm64: dts: qcom: Enable eMMC on apq8016-sbc board
  arm64: dts: qcom: Add 8x16 Serial UART1 node
  arm64: dts: qcom: Add RNG device tree node

Merge tag 'juno-scpi-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt

Merge "SCPI support on ARM64 Juno Development Platform" from Sudeep Holla:

  1. SRAM, MHU mailbox and SCPI support
  2. CPU topology using cpu-map
  3. Clock support for all the cpus
  4. Support for SoC sensors

* tag 'juno-scpi-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: Add sensor node to Juno dt
  arm64: dts: add clock support for all the cpus
  arm64: dts: add CPU topology on Juno
  arm64: dts: add SRAM, MHU mailbox and SCPI support on Juno

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'keystone-dts-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt

Merge "ARM Keystone DTS part2 for 4.4" from Santosh Shilimkar:

	- Typo fix the soc binding documentation
	- NETCP Accumulator nodes

* tag 'keystone-dts-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: dts: keystone: enable accumulator channels
  Documentation: dt: keystone: Fix up missing quotes

Merge tag 'omap-for-v4.4/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "Device tree changes for omaps for v4.4 merge window:" from Tony Lindgren:

- DCAN sleep pins for am437x-gp-evm

- A series of changes to add audio support for dra7

- Add support for gpio keys and LEDs on dra7

- Regulator clean-up for am335x-wega

- A series of changes to enable IOMMUs and mailboxes for dra7
  accelerators

- Add support for am335x-bonegreen

- Fix up GPIO flags where 0 was used instead of GPIO_ACTIVE_HIGH

- Fix omap3-lilly-am33x IRQ level flag

- Remove duplicate uart2 pinmux for igep and fix indentation and
  update igep to use pinctrl macros for the register offsets

- Fix MMC cd-gpios usage

Note that this branch is against v4.3-rc4 as that contains critical
MMC related fixes to boot with MMC working on most omaps.

* tag 'omap-for-v4.4/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (33 commits)
  ARM: dts: omap3-igep: Use OMAP3_CORE1_IOPAD pinmux macro
  ARM: dts: dra7xx: am57xx: fix cd-gpios definition as per hardware design and dt binding docs
  ARM: dts: am43xx: fix cd-gpios definition as per hardware design and dt binding docs
  ARM: dts: am335x: fix cd-gpios definition as per hardware design and dt binding docs
  ARM: dts: omap3-igep0020: Remove duplicate uart2 pinmux
  ARM: dts: omap3-igep: Fix indentation
  ARM: dts: omap3-lilly-a83x: Don't use IRQ level flag for a GPIO
  ARM: dts: DRA74x: Add IOMMU nodes for DSP2
  ARM: dts: DRA7: Add common IOMMU nodes
  ARM: dts: DRA74x: Add dsp2_system syscon node
  ARM: dts: DRA7: Add dsp1_system syscon node
  ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards
  ARM: dts: Add am335x-bonegreen
  ARM: dts: beagle-x15: Enable the system mailboxes 5 and 6
  ARM: dts: dra72-evm: Enable the system mailboxes 5 and 6
  ARM: dts: dra7-evm: Enable the system mailboxes 5 and 6
  ARM: dts: DRA72x: Add IPC sub-mailbox nodes for IPU1, IPU2 & DSP1
  ARM: dts: DRA74x: Add IPC sub-mailbox nodes for all IPUs & DSPs
  ARM: dts: am335x-wega: Clean up regulators
  ARM: dts: dra7-evm: add gpio key support
  ...

Merge tag 'berlin-dt-cpuclk-for-4.4-1' of git://git.infradead.org/users/hesselba/linux-berlin into next/dt

Pull "Marvell Berlin DT CPU clock for 4.4" from Sebastian Hesselbarth:
- add missing CLKID_CPU for Berlin BG2Q

* tag 'berlin-dt-cpuclk-for-4.4-1' of git://git.infradead.org/users/hesselba/linux-berlin:
  ARM: berlin: dts: add CLKID_CPU for BG2Q

Marvell Berlin BG2Q SoC also has a clock for the CPU, add a
corresponding CLKID to the dt-binding include.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

Pull "Qualcomm ARM Based Device Tree Updates for v4.4" from Andy Gross:

* Add DT binding document for SMEM
* Add SMD, RPM, and Regulator nodes on MSM8974
* Remove extra reg element from iadc device
* Remove redunandant i2c pinctrl properties on APQ8064
* Remove unnecessary eeprom label on IFC6410
* Remove unnecessary eeprom label from QS600
* Add PM8921 RTC support on APQ8064
* Add PM8921 pwrkey support on APQ8064
* Prefix GSBI6 uart pins on APQ8064 correctly
* Add missing GSBI7 uart pinctrl on APQ8064
* Add missing GSBI7 uart pinctrl on IFC6410
* Add missing GSBI7 pinctrl uart property on QS600
* Add pwrseq support for WLAN on IFC6410
* Add pwrseq support for WLAN on QS600
* Add notify led support on IFC6410
* Add SD card detect support onQS600
* Add #power-domain-cells property to documentation
* Add Qualcomm SMBB binding document
* Add PM8941 charge node
* Fix typo in disabled property on MSM8974

* tag 'qcom-dt-for-4.4' of git://codeaurora.org/quic/kernel/agross-msm:
  ARM: dts: msm8974: fix typo in "disabled" property
  ARM: dts: qcom-pm8941: Add charger node
  dt-binding: power: Add Qualcomm SMBB binding
  arm: dts: qcom: Add #power-domain-cells property
  ARM: dts: qs600: Add SD card detect support.
  ARM: dts: apq8064-ifc6410: add notify led support.
  ARM: dts: qs600: add pwrseq support to WLAN
  ARM: dts: ifc6410: Add pwrseq support for WLAN
  ARM: dts: qs600: Add missing pinctrl property for gsbi7 uart
  ARM: dts: ifc6410: Add missing pinctrl to gsbi7 uart
  ARM: dts: apq8064: add missing gsbi7 uart pinctrl
  ARM: dts: apq8064: Prefix the gsbi6 uart pins correctly
  ARM: dts: apq8064: add pm8921 pwrkey support
  ARM: dts: apq8064: add pm8921 rtc
  ARM: dts: qs600: remove unnecessary eeprom label
  ARM: dts: ifc6410: remove unnecessary eeprom label
  ARM: dts: apq8064: remove redundant i2c pinctrl properties
  ARM: dts: qcom: Remove extra reg element from iadc device
  ARM: dts: msm8974: Add smd, rpm and regulator nodes
  soc: qcom: Add device tree binding for SMEM

The Juno motherboard has a NOR flash on the motherboard, enable
this to be accessed with the CFI flash driver. Results after
enabling MTD, MTD_CFI, MTD_PHYSMAP, MTD_PHYSMAP_OF,
MTD_CFI_INTELEXT:

8000000.flash: Found 2 x16 devices at 0x0 in 32-bit bank.
Manufacturer ID 0x000089 Chip ID 0x008919
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Using buffer write method
Using auto-unlock on power-up/resume
cfi_cmdset_0001: Erase suspend on write enabled
erase region 0: offset=0x0,size=0x40000,blocks=255
erase region 1: offset=0x3fc0000,size=0x10000,blocks=4

Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-dt2-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Second Round of Renesas ARM Based SoC DT Updates for v4.4" from Simon Horman:

* Enable the following on the porter board:
  I2C2, PCI, PCIe, QSPI, SATA0, SDHI0/2, USB PHY and VIN0/ADV7180.

* tag 'renesas-dt2-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: porter: enable internal PCI and USB PHY
  ARM: shmobile: porter: enable PCIe
  ARM: shmobile: porter: add QSPI DT support
  ARM: shmobile: porter: add VIN0/ADV7180 DT support
  ARM: shmobile: porter: add I2C2 DT support
  ARM: shmobile: porter: enable SATA0
  ARM: shmobile: porter: add SDHI0/2 DT support

In UniPhier SoCs before ProXstream2 and PH1-LD6b, two address spaces
 0x00000000 - 0x0fffffff
 0x40000000 - 0x4fffffff
are both mapped to the external bus (also called system bus),
so either was OK.

In the newest two SoCs, the former (0x00000000 - 0x0fffffff) is
assigned for the serial NOR interface.

For the consistency, use the latter for all the SoCs.

Also, fix the range properties to reflect the real address mapping,
where the support card is located at the offset address 0x01f00000
of CS1 of the external bus.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Use the macro instead of absolute register offsets to make the code more
readable as the values now match register addresses from the datasheet.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge tag 'samsung-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Merge "Samsung DT updates for v4.4" from Kukjin Kim:

- New board support
  : add exynos5250-snow-rev5 DT file to support Snow Rev5+ board
  : add exynos5422-odroidxu4 DT file to support Odroid XU4 board
  : split exynos5422-odroidxu3-audio DT file from odroidxu3-common

- USE GPIO constants for flags cells for exynos boards
- fix cpu compatible value to 'arm926ej-s' for s3c2416

- add DMA support for serial ports for exynos4
- add suspend opp for exynos4412
- remove regulator-compatible usage for exynos4412-trats2

- enable EC vboot context support for Peach boards
- move display-timings node to DP for exynos5250-arndale, smdk5250 and smdk5420

- for exynos4412-odroid/odroidu3
  : unify voltage regulator style and
  : remove redundant pinctrl settings
  : add pwm-fan node and use it as a colling device

- for exynos5422-odroidxu3
  : fix power off method and LEDs

- dt-bindings
  : grounded AC0KB pin on S2MPS11
  : entry how to use PWM FAN as a cooling device

* tag 'samsung-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (22 commits)
  ARM: dts: Use GPIO constants for flags cells in exynos5440 boards
  ARM: dts: Use GPIO constants for flags cells in exynos5420/5422/5800 boards
  ARM: dts: Use GPIO constants for flags cells in exynos4412 boards
  ARM: dts: Use GPIO constants for flags cells in exynos4120 boards
  ARM: dts: Use GPIO constants for flags cells in exynos3250 boards
  ARM: dts: Enable EC vboot context support on Peach boards
  ARM: dts: Remove regulator-compatible usage in exynos4412-trats2
  ARM: dts: Move display-timings node from fimd to dp in exynos5250-arndale, smdk5250 and smdk5420
  ARM: dts: Add Exynos5250 Snow Rev5+ support on exynos5250-snow-rev5
  ARM: dts: Unify voltage regulator style in exynos4412-odroid
  ARM: dts: Remove redundant pinctrl settings in exynos4412-odroid
  ARM: dts: Fix cpu compatible value for s3c2416
  ARM: dts: Add support Odroid XU4 board for exynos5422-odroidxu4
  ARM: dts: Split audio configuration to separate exynos5422-odroidxu3-audio
  ARM: dts: Fix power off method for exynos5422-odroidxu3-common
  dt-bindings: Document grounded ACOKB pin on S2MPS11
  ARM: dts: use pwm-fan device as a cooling device for exynos4412-odroidu3
  ARM: dts: Add pwm-fan node for exynos4412-odroidu3
  dt-bindings: Documentation entry to explain how to use PWM FAN as a cooling device
  ARM: dts: add suspend opp to exynos4412
  ...

Commit 9ccd6080 "arm64: dts: add device tree for ARM SMM-A53x2 on
LogicTile Express 20MG" added a new dts file to arch/arm64 which
included "../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi", i.e. a
.dtsi supplied by arch/arm.

Unfortunately this causes some issues for the split device tree
repository[0], since things get moved around there. In that context
the new .dts ends up at src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts
while the include is at src/arm/vexpress-v2m-rs1.dtsi.

The sharing of the .dtsi is legitimate since the baseboard is the same
for various vexpress systems whatever processor they use.

Previously I attempted to resolve this by creating a shared location
for such things but we have been unable to come to a consensus on
where that should be.

Instead this patch simply replaces the use of ../../ in the dts
/include/ with a symlink in arch/arm64/boot/dts/arm pointing to the
file arch/arm/boot/dts.

Since the split device tree repo will shortly be required to flatten
symlinks for other reasons this will cause the dtsi file to appear in
both src/arm and src/arm64 in the split repo, which is an improvement
on not building for arm64 now.

[0] https://git.kernel.org/cgit/linux/kernel/git/devicetree/devicetree-rebasing.git/



Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Kristina Martsenko <kristina.martsenko@arm.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Frank Rowand <frank.rowand@sonymobile.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: arm@kernel.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull "ARM: DT: Hisilicon SoC DT updates for 4.4" from Wei Xu:

- Drop console= and earlyprintk bootargs parameter in hisilicon armv7 dts

* tag 'hisi-soc-dt-for-4.4' of git://github.com/hisilicon/linux-hisi:
  ARM: hisilicon: DT: Drop console= and earlyprintk bootargs parameter

The DTS erronously uses the wrong reg mapping and IRQ numbers for some
UART, WDT and timer nodes. Fix this.

Reported-by: John Wehle <john@feith.com>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-dt-for-4.4' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Pull "Allwinner DT changes for 4.4" from Maxime Ripard:

DT patches for the 4.4 merge window, most notably:
  - Enable the OTG controller on more boards
  - Create new DTSI for the q8's design
  - Added RSB support to the A23 and A33 SoCs
  - New boards: Olimex A20 EVB, Yones bs1078v2

Plus the usual random patches enabling and / or enhancing a few things in
particular boards.

* tag 'sunxi-dt-for-4.4' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (59 commits)
  ARM: dts: sun6i: hummingbird: Drop AXP221 DC1SW and DC5LDO supplies
  ARM: dts: sun8i: sinlinx-sina33: Enable Reduced Serial Bus controller
  ARM: dts: sun8i: q8-common: Enable RSB controller for A23/A33 Q8 tablets
  ARM: dts: sun8i: Add Reduced Serial Bus controller device node to A23/A33 dtsi
  ARM: dts: sun4i: Add AXP209 PMU regulators for pcDuino1/2
  ARM: sun7i: dt: Add new Olimex A20 EVB device
  ARM: dts: sun6i: hummingbird: Add aliases for rtc devices
  ARM: dts: sun7i: Add dts file for Wits Pro A20 DKT
  ARM: dts: sun7i: Enable USB DRC on Wexler TAB7200
  ARM: dts: sun7i: Enable USB DRC on the Orange pi
  ARM: dts: sun7i: Enable USB DRC on orangepi-mini
  ARM: dts: axp209: Add usb_power_supply child node to the ax209 node
  ARM: dts: sun8i: Make ippo-q8h-v1.2.dts a symlink to q8-tablet.dts
  ARM: dts: sun8i: Add sun8i-a33-q8-tablet.dts file
  ARM: dts: sun6i: Add support for Yones Toptech bs1078v2 tablets
  ARM: dts: sun4i: Enable USB DRC on the Marsboard A10
  ARM: dts: sun4i: gemei-g9: Add accelerometer (bma250) IRQ
  ARM: dts: sun8i-a33: Add security system crypto engine clock and device nodes
  ARM: dts: sun8i: Add pwm-backlight device for A23/A33 Q8 format tablets
  ARM: sun8i: A23: Add missing msgbox gate
  ...

Pull "Device Tree additions for NXP LPC18xx platform" from Joachim Eastwood:
 - Reset controller (RGU)
 - DMA controller and mux
 - SPI Flash (SPIFI) controller
 - I2C controller
 - Watchdog and SCT PWM from Ariel D'Alessandro

And board updates for EA4357 dev kit and Hitex LPC4350 eval board
adding I2C, SPIFI Flash and some miscellaneous stuff.

* tag 'lpc18xx_dts_for_4.4' of https://github.com/manabian/linux-lpc:
  ARM: dts: lpc4350-hitex-eval: add joystick, buttons and leds
  ARM: dts: lpc4350-hitex-eval: add i2c0 and devices
  ARM: dts: lpc4350-hitex-eval: add spifi and flash device
  ARM: dts: lpc4357-ea4357: add i2c0 and devices
  ARM: dts: lpc4357-ea4357: add ssp0
  ARM: dts: lpc4357-ea4357: add spifi and flash device
  ARM: dts: lpc18xx: add resets entry to device nodes
  ARM: dts: lpc18xx: add sct pwm node
  ARM: dts: lpc18xx: add watchdog node
  ARM: dts: lpc18xx: add i2c nodes
  ARM: dts: lpc18xx: add dma to uart0/1/2/3
  ARM: dts: lpc18xx: add dma to ssp0/1
  ARM: dts: lpc18xx: add dmamux node
  ARM: dts: lpc18xx: add dmac node
  ARM: dts: lpc18xx: add spifi node
  ARM: dts: lpc18xx: add rgu node

Merge tag 'berlin64-dt-for-4.4-1' of git://git.infradead.org/users/hesselba/linux-berlin into next/dt

Merge "Marvell Berlin ARM64 DT for 4.4 take 1" from Sebastian Hesselbarth:
- add BG4CT GPIO nodes
- add BG4CT STB reference board

* tag 'berlin64-dt-for-4.4-1' of git://git.infradead.org/users/hesselba/linux-berlin:
  arm64: dts: add dts file for Marvell Berlin4CT STB board
  arm64: dts: berlin4ct: add GPIO nodes

Merge "Marvell Berlin DT for 4.4 take 1" from Sebastian Hesselbarth:
- use serial aliases and stdout path
- add cpufreq properties to all SoCs
- add pwm nodes for all SoCs

This depends on topic branch berlin-cpuclk-for-4.4-1

* tag 'berlin-dt-for-4.4-1' of git://git.infradead.org/users/hesselba/linux-berlin:
  ARM: berlin: add a PWM node on the BG2CD
  ARM: berlin: add a PWM node on the BG2
  ARM: berlin: add a PWM node on the BG2Q
  ARM: berlin: dts: add the cpufreq-dt bindings on the BG2CD
  ARM: berlin: dts: add the cpufreq-dt bindings on the BG2
  ARM: berlin: dts: add the cpufreq-dt bindings on the BG2Q
  arm: dts: berlin: use stdout-path
  arm: dts: berlin: add aliases for serial

Merge "mvebu dt for 4.4 (part 1)" from Gregory CLEMENT:

Update dts to use the new crypto driver on mvebu SoCs

* tag 'mvebu-dt-4.4-1' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: modify Orion and Kirkwoord crypto compatible strings
  ARM: mvebu: use new bindings for existing crypto devices
  ARM: mvebu: define crypto SRAM ranges for all armada-38x boards
  ARM: mvebu: add crypto related nodes to armada 38x dtsi
  ARM: mvebu: define crypto SRAM ranges in armada-375-db.dts
  ARM: mvebu: add crypto related nodes to armada 375 dtsi
  ARM: mvebu: define crypto SRAM ranges for all armada-370 boards
  ARM: mvebu: add crypto related nodes to armada 370 dtsi
  ARM: mvebu: define crypto SRAM ranges for all armada-xp boards
  ARM: mvebu: add crypto related nodes to armada-xp.dtsi
  ARM: mvebu: add CPU config registers in the Armada 370/XP Device Tree

This patch enables spi buses on low speed and high speed expansion
connectors on DB410C

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

This patch enables i2c buses on low speed and high speed expansion
connectors on DB410C.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

This patch adds missing support for i2c0 and i2c6, this support is
required to connect the i2c slaves on LS expansion on DB410c.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

This patch fixes the i2c pinctrl sleep state by changing the pinconf
function to be in gpio mode rather than i2c.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

Enable the eMMC on the APQ8016 SBC board (also known as DragonBoard 410c),
so that we can use its internal storage.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>