- May 05, 2010
-
-
David Howells authored
Fix an RCU warning in the reading of user keys: =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- security/keys/user_defined.c:202 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 1 lock held by keyctl/3637: #0: (&key->sem){+++++.}, at: [<ffffffff811a80ae>] keyctl_read_key+0x9c/0xcf stack backtrace: Pid: 3637, comm: keyctl Not tainted 2.6.34-rc5-cachefs #18 Call Trace: [<ffffffff81051f6c>] lockdep_rcu_dereference+0xaa/0xb2 [<ffffffff811aa55f>] user_read+0x47/0x91 [<ffffffff811a80be>] keyctl_read_key+0xac/0xcf [<ffffffff811a8a06>] sys_keyctl+0x75/0xb7 [<ffffffff81001eeb>] system_call_fastpath+0x16/0x1b Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
Serge Hallyn <serue@us.ibm.com> Signed-off-by:
James Morris <jmorris@namei.org>
-
David Howells authored
The x86_64 call_rwsem_wait() treats the active state counter part of the R/W semaphore state as being 16-bit when it's actually 32-bit (it's half of the 64-bit state). It should do "decl %edx" not "decw %dx". Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-core: Use per-adapter userspace device lists i2c: Fix probing of FSC hardware monitoring chips i2c-core: Erase pointer to clientdata on removal
-
Linus Torvalds authored
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Fix resource leak in failure path of perf_event_open()
-
Linus Torvalds authored
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rcu: Fix RCU lockdep splat on freezer_fork path rcu: Fix RCU lockdep splat in set_task_cpu on fork path mutex: Don't spin when the owner CPU is offline or other weird cases
-
- May 04, 2010
-
-
Jean Delvare authored
Using a single list for all userspace devices leads to a dead lock on multiplexed buses in some circumstances (mux chip instantiated from userspace). This is solved by using a separate list for each bus segment. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Acked-by:
Michael Lawnick <ml.lawnick@gmx.de>
-
Jean Delvare authored
Some FSC hardware monitoring chips (Syleus at least) doesn't like quick writes we typically use to probe for I2C chips. Use a regular byte read instead for the address they live at (0x73). These are the only known chips living at this address on PC systems. For clarity, this fix should not be needed for kernels 2.6.30 and later, as we started instantiating the hwmon devices explicitly based on DMI data. Still, this fix is valuable in the following two cases: * Support for recent FSC chips on older kernels. The DMI-based device instantiation is more difficult to backport than the device support itself. * Case where the DMI-based device instantiation fails, whatever the reason. We fall back to probing in that case, so it should work. This fixes kernel bug #15634: https://bugzilla.kernel.org/show_bug.cgi?id=15634 Signed-off-by:
Jean Delvare <khali@linux-fr.org> Acked-by:
Hans de Goede <hdegoede@redhat.com> Cc: stable@kernel.org
-
Wolfram Sang authored
After discovering that a lot of i2c-drivers leave the pointer to their clientdata dangling, it was decided to let the core handle this issue. It is assumed that the core may access the private data after remove() as there are no guarantees for the lifetime of such pointers anyhow (see thread starting at http://lkml.org/lkml/2010/3/21/68 ) Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
Jean Delvare <khali@linux-fr.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: remove bad auth_x kmem_cache ceph: fix lockless caps check ceph: clear dir complete, invalidate dentry on replayed rename ceph: fix direct io truncate offset ceph: discard incoming messages with bad seq # ceph: fix seq counting for skipped messages ceph: add missing #includes ceph: fix leaked spinlock during mds reconnect ceph: print more useful version info on module load ceph: fix snap realm splits ceph: clear dir complete on d_move
-
Sage Weil authored
It's useless, since our allocations are already a power of 2. And it was allocated per-instance (not globally), which caused a name collision when we tried to mount a second file system with auth_x enabled. Signed-off-by:
Sage Weil <sage@newdream.net>
-
Sage Weil authored
The __ variant requires caller to hold i_lock. Signed-off-by:
Sage Weil <sage@newdream.net>
-
Sage Weil authored
If a rename operation is resent to the MDS following an MDS restart, the client does not get a full reply (containing the resulting metadata) back. In that case, a ceph_rename() needs to compensate by doing anything useful that fill_inode() would have, like d_move(). It also needs to invalidate the dentry (to workaround the vfs_rename_dir() bug) and clear the dir complete flag, just like fill_trace(). Signed-off-by:
Sage Weil <sage@newdream.net>
-
Sage Weil authored
truncate_inode_pages_range wants the end offset to align with the last byte in a page. Signed-off-by:
Sage Weil <sage@newdream.net>
-
Sage Weil authored
We can get old message seq #'s after a tcp reconnect for stateful sessions (i.e., the MDS). If we get a higher seq #, that is an error, and we shouldn't see any bad seq #'s for stateless (mon, osd) connections. Signed-off-by:
Sage Weil <sage@newdream.net>
-
Sage Weil authored
Increment in_seq even when the message is skipped for some reason. Signed-off-by:
Sage Weil <sage@newdream.net>
-
Sage Weil authored
Signed-off-by:
Sage Weil <sage@newdream.net>
-
Sage Weil authored
Signed-off-by:
Sage Weil <sage@newdream.net>
-
Sage Weil authored
Decouple the client version from the server side. Print relevant protocol and map version info instead. Signed-off-by:
Sage Weil <sage@newdream.net>
-
Sage Weil authored
The snap realm split was checking i_snap_realm, not the list_head, to determine if an inode belonged in the new realm. The check always failed, which meant we always moved the inode, corrupting the old realm's list and causing various crashes. Also wait to release old realm reference to avoid possibility of use after free. Signed-off-by:
Sage Weil <sage@newdream.net>
-
Sage Weil authored
d_move() reorders the d_subdirs list, breaking the readdir result caching. Unless/until d_move preserves that ordering, clear CEPH_I_COMPLETE on rename. Signed-off-by:
Sage Weil <sage@newdream.net>
-
- May 03, 2010
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: ep93xx_wdt.c fix default timout value in MODULE_PARM_DESC string.
-
Ryusuke Konishi authored
As of 32a88aa1, __sync_filesystem() will return 0 if s_bdi is not set. And nilfs does not set s_bdi anywhere. I noticed this problem by the warning introduced by the recent commit 5129a469 ("Catch filesystem lacking s_bdi"). WARNING: at fs/super.c:959 vfs_kern_mount+0xc5/0x14e() Hardware name: PowerEdge 2850 Modules linked in: nilfs2 loop tpm_tis tpm tpm_bios video shpchp pci_hotplug output dcdbas Pid: 3773, comm: mount.nilfs2 Not tainted 2.6.34-rc6-debug #38 Call Trace: [<c1028422>] warn_slowpath_common+0x60/0x90 [<c102845f>] warn_slowpath_null+0xd/0x10 [<c1095936>] vfs_kern_mount+0xc5/0x14e [<c1095a03>] do_kern_mount+0x32/0xbd [<c10a811e>] do_mount+0x671/0x6d0 [<c1073794>] ? __get_free_pages+0x1f/0x21 [<c10a684f>] ? copy_mount_options+0x2b/0xe2 [<c107b634>] ? strndup_user+0x48/0x67 [<c10a81de>] sys_mount+0x61/0x8f [<c100280c>] sysenter_do_call+0x12/0x32 This ensures to set s_bdi for nilfs and fixes the sync silent failure. Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by:
Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Wim Van Sebroeck authored
The WATCHDOG_TIMEOUT macro does not exist. The default timeout value is WDT_TIMEOUT. Fix the MODULE_PARM_DESC so that the code can compile again. reported-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be>
-
- May 01, 2010
-
-
Tejun Heo authored
perf_event_open() kfrees event after init failure which doesn't release all resources allocated by perf_event_alloc(). Use free_event() instead. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@au1.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: <stable@kernel.org> LKML-Reference: <4BDBE237.1040809@kernel.org> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (27 commits) MIPS: Loongson 2F: Fix of problems introduced by -mfix-loongson2f-jump MIPS: Loongson-2F: Use CONFIG_CPU_JUMP_WORKAROUNDS to control workarounds. MIPS: Loongson 2F: Enable fixups of the latest binutils MIPS: Loongson: Add CPU_LOONGSON2F_WORKAROUNDS MIPS: Kconfig: Make Broadcom SoC support naming consistent MIPS: BCM63xx: Update defconfig MIPS: oprofile: Fix breakage when CONFIG_OPROFILE=m STAGING: octeon-ethernet: Use proper phy addresses for Movidis hardware. NET: mdio-octeon: Enable the hardware before using it. I2C: Fix section mismatch errors in i2c-octeon.c MIPS: Loongson: Fix LOONGSON_ADDRWIN_CFG macro. MIPS: Loongson: Fix phys_mem_access_prot() check MIPS: Loongson: Fix find_vga_mem_init() MIPS: Loongson: Fix typo in gdium mach type string. MIPS: Use CKSEG1ADDR for uncached handler MIPS: Check for accesses beyond the end of the PGD. MIPS: Use uasm_i_ds{r,l}l_safe() instead of uasm_i_ds{r,l}l() in tlbex.c MIPS: Add uasm_i_dsrl_safe() and uasm_i_dsll_safe() to uasm. MIPS: die() does not call die notifier chain MIPS: Swarm, Littlesur: Enable PATA platform driver. ...
-
Wu Zhangjin authored
The -mfix-loongson2f-jump option provided by latest CVS binutils have fixed the out-of-order issue of Loongson-2F described in chapter 15 of the Loongson2F User Manual [1, 2], but introduced some problems. The option changes all of the jump target to "addr & 0xcfffffff" through the at($1) register, but for the reboot address of Loongson 2F 0xbfc00000 this is wrong. Avoids the problem via telling the assembler to not use the $at register. [1] Loongson2F User Manual (Chinese Version) http://www.loongson.cn/uploadfile/file/200808211 [2] English Version of Chapter 15: http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=source Reported-and-tested-by:
Liu Shiwei <liushiwei@gmail.com> Signed-off-by:
Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1109/ Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Wu Zhangjin authored
Signed-off-by:
Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1106/ Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Wu Zhangjin authored
With the "Fixups of Loongson2F" patch [1] having been applied to binutils for binutils 2.20.1 we now can use it's time to enable the options provided by the patch to compile the kernel. Without these fixups, the system may hang if the erratum is triggered. For more information on these fixups please refer to the following references. [1] "Fixups of Loongson2F" patch for binutils(actually for gas) http://sourceware.org/ml/binutils/2009-11/msg00387.html [2] Chapter 15 of "Loongson2F User Manual"(Chinese Version) http://www.loongson.cn/uploadfile/file/200808211 [3] Chapter 15 of the English version Loongson 2F User Manual http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=source Signed-off-by:
Zhang Le <r0bertz@gentoo.org> Signed-off-by:
Wu Zhangjin <wuzhangjin@gmail.com> Cc: Zhang Le <r0bertz@gentoo.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1106/ Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Wu Zhangjin authored
As documented in the Loongson 2F User Manual [2, 3], the old Loongson2F series (2F01 / 2F02) have the NOP & JUMP issues which requires workarounds in the kernel and binutils. This issue has been rectified in Loongson 2F series 2F03 so no workarounds needed. Now that the workarounds [1] adding the the -mfix-loongson2f-nop and -mfix-loongson2f-jump options have been comitted to the binutils the CVS repository), we can add the workarounds in the kernel. The workarounds have no significant side effect on the system but may decrease performance so we control them through a a new CPU_LOONGSON2F_WORKAROUNDS config option allowing the users to only enable it as necessary. [1] "Fixups of Loongson2F" patch for binutils(actually for gas) http://sourceware.org/ml/binutils/2009-11/msg00387.html [2] Chapter 15 of "Loongson2F User Manual"(Chinese Version) http://www.loongson.cn/uploadfile/file/200808211 [3] English Version of the above chapter 15 http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=source Signed-off-by:
Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1105/ Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <ffainelli@freebox.fr> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1082/ Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Florian Fainelli authored
the defconfig was out-of-sync since 2.6.30-rc6, update it with the new symbols and enable BCM6338, 6345, wireless, b43 driver and LEDs support. Signed-off-by:
Fainelli <ffainelli@freebox.fr> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1081/ Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Wu Zhangjin authored
When the oprofile is compiled as a module do_IRQ() is not called in arch/mips/loongson/lemote-2f/irq.c due to a wrong #ifdef there. Signed-off-by:
Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1143/ Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
David Daney authored
Signed-off-by:
David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: netdev@vger.kernel.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/1091/ Acked-by:
David S. Miller <davem@davemloft.net> Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
David Daney authored
In some cases the mdio bus is not enabled at the time of probing. This prevents anything from working, so we will enable it before trying to use it, and disable it when the driver is removed. Signed-off-by:
David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: netdev@vger.kernel.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/1090/ Acked-by:
David S. Miller <davem@davemloft.net> Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
David Daney authored
Signed-off-by:
David Daney <ddaney@caviumnetworks.com> To: linux-i2c@vger.kernel.org To: ben-linux@fluff.org To: khali@linux-fr.org Cc: linux-mips@linux-mips.org Cc: rade.bozic.ext@nsn.com Patchwork: http://patchwork.linux-mips.org/patch/1037/ Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Arnaud Patard authored
There's a typo in the LOONGSON_ADDRWIN_CFG macro. The cpu window mmap register address should contain the destination parameters not the source one. This has not been noticed because the code is only using source = destination. Signed-off-by:
Arnaud Patard <apatard@mandriva.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1162/ Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Arnaud Patard authored
The check used to determine if uncached accelerated should be used or not is wrong. The parenthesis are misplaced and making the test fail. Signed-off-by:
Arnaud Patard <apatard@mandriva.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1161/ Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Richard LIU authored
This allows to use all display device for instance DISPLAY_OTHER like SM501. Signed-off-by:
Arnaud Patard <apatard@mandriva.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1160/ Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Arnaud Patard authored
It's not "gidum" but "gdium". Signed-off-by:
Arnaud Patard <apatard@mandriva.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1159/ Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Sebastian Andrzej Siewior authored
"MIPS: Calculate proper ebase value for 64-bit kernels" 9af43ea080dd5d6c7b34f38261780e5dd43537bc (lmo) rsp. f6be75d0 (kernel.org) broke some 64-bit MIPS systems. Before this we were using XKPHYS/cached as ebase and computed the uncached xphsys/unchached address for that area. After that commit ebase became a 32-bit compat address and convert does not work anymore. We now should use CKSEG1 for this. CKSEG1ADDR does just that in 32-bit and 64-bit. Signed-off-by:
Sebastian Andrzej Siewior <sebastian@breakpoint.cc> To: Ralf Baechle <ralf@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1149/ Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-