- Oct 04, 2016
-
-
Cyril Bur authored
Previous rework of TM code leaves these functions unused Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Cyril Bur authored
Make the structures being used for checkpointed state named consistently with the pt_regs/ckpt_regs. Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Cyril Bur authored
There is currently an inconsistency as to how the entire CPU register state is saved and restored when a thread uses transactional memory (TM). Using transactional memory results in the CPU having duplicated (almost) all of its register state. This duplication results in a set of registers which can be considered 'live', those being currently modified by the instructions being executed and another set that is frozen at a point in time. On context switch, both sets of state have to be saved and (later) restored. These two states are often called a variety of different things. Common terms for the state which only exists after the CPU has entered a transaction (performed a TBEGIN instruction) in hardware are 'transactional' or 'speculative'. Between a TBEGIN and a TEND or TABORT (or an event that causes the hardware to abort), regardless of the use of TSUSPEND the transactional state can be referred to as the live state. The second state is often to referred to as the 'checkpointed' state and is a duplication of the live state when the TBEGIN instruction is executed. This state is kept in the hardware and will be rolled back to on transaction failure. Currently all the registers stored in pt_regs are ALWAYS the live registers, that is, when a thread has transactional registers their values are stored in pt_regs and the checkpointed state is in ckpt_regs. A strange opposite is true for fp_state/vr_state. When a thread is non transactional fp_state/vr_state holds the live registers. When a thread has initiated a transaction fp_state/vr_state holds the checkpointed state and transact_fp/transact_vr become the structure which holds the live state (at this point it is a transactional state). This method creates confusion as to where the live state is, in some circumstances it requires extra work to determine where to put the live state and prevents the use of common functions designed (probably before TM) to save the live state. With this patch pt_regs, fp_state and vr_state all represent the same thing and the other structures [pending rename] are for checkpointed state. Acked-by:
Simon Guo <wei.guo.simon@gmail.com> Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Cyril Bur authored
If a thread receives a signal while transactional the kernel creates a second context to show the transactional state of the process. This test loads some known values and waits for a signal and confirms that the expected values are in the signal context. Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Cyril Bur authored
If a thread receives a signal while transactional the kernel creates a second context to show the transactional state of the process. This test loads some known values and waits for a signal and confirms that the expected values are in the signal context. Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Cyril Bur authored
If a thread receives a signal while transactional the kernel creates a second context to show the transactional state of the process. This test loads some known values and waits for a signal and confirms that the expected values are in the signal context. Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Cyril Bur authored
If a thread receives a signal while transactional the kernel creates a second context to show the transactional state of the process. This test loads some known values and waits for a signal and confirms that the expected values are in the signal context. Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Cyril Bur authored
Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Cyril Bur authored
Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Cyril Bur authored
Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Cyril Bur authored
Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Cyril Bur authored
Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Cyril Bur authored
The FPU regs are placed at the top of the stack frame. Currently the position expected to be passed to the macro. The macros now should be passed the stack frame size and from there they can calculate where to put the regs, this makes the use simpler. Also move them to a header file to be used in an different area of the powerpc selftests Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Cyril Bur authored
Ensure the kernel correctly switches VSX registers correctly. VSX registers are all volatile, and despite the kernel preserving VSX across syscalls, it doesn't have to. Test that during interrupts and timeslices ending the VSX regs remain the same. Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Cyril Bur authored
Much of the signal code takes a pt_regs on which it operates. Over time the signal code has needed to know more about the thread than what pt_regs can supply, this information is obtained as needed by using 'current'. This approach is not strictly incorrect however it does mean that there is now a hard requirement that the pt_regs being passed around does belong to current, this is never checked. A safer approach is for the majority of the signal functions to take a task_struct from which they can obtain pt_regs and any other information they need. The caveat that the task_struct they are passed must be current doesn't go away but can more easily be checked for. Functions called from outside powerpc signal code are passed a pt_regs and they can confirm that the pt_regs is that of current and pass current to other functions, furthurmore, powerpc signal functions can check that the task_struct they are passed is the same as current avoiding possible corruption of current (or the task they are passed) if this assertion ever fails. CC: paulus@samba.org Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Cyril Bur authored
After a thread is reclaimed from its active or suspended transactional state the checkpointed state exists on CPU, this state (along with the live/transactional state) has been saved in its entirety by the reclaiming process. There exists a sequence of events that would cause the kernel to call one of enable_kernel_fp(), enable_kernel_altivec() or enable_kernel_vsx() after a thread has been reclaimed. These functions save away any user state on the CPU so that the kernel can use the registers. Not only is this saving away unnecessary at this point, it is actually incorrect. It causes a save of the checkpointed state to the live structures within the thread struct thus destroying the true live state for that thread. Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Cyril Bur authored
msr_check_and_set() always performs a mfmsr() to determine if it needs to perform an mtmsr(), as mfmsr() can be a costly operation msr_check_and_set() could return the MSR now on the CPU to avoid callers of msr_check_and_set having to make their own mfmsr() call. Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Cyril Bur authored
giveup_all() causes FPU/VMX/VSX facilities to be disabled in a threads MSR. If the thread performing the giveup was transactional, the kernel must record which facilities were in use before the giveup as the thread must have these facilities re-enabled on return to userspace. >From process.c: /* * This is called if we are on the way out to userspace and the * TIF_RESTORE_TM flag is set. It checks if we need to reload * FP and/or vector state and does so if necessary. * If userspace is inside a transaction (whether active or * suspended) and FP/VMX/VSX instructions have ever been enabled * inside that transaction, then we have to keep them enabled * and keep the FP/VMX/VSX state loaded while ever the transaction * continues. The reason is that if we didn't, and subsequently * got a FP/VMX/VSX unavailable interrupt inside a transaction, * we don't know whether it's the same transaction, and thus we * don't know which of the checkpointed state and the transactional * state to use. */ Calling check_if_tm_restore_required() will set TIF_RESTORE_TM and save the MSR if needed. Fixes: c2085059 ("powerpc: create giveup_all()") Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Cyril Bur authored
Comment from arch/powerpc/kernel/process.c:967: If userspace is inside a transaction (whether active or suspended) and FP/VMX/VSX instructions have ever been enabled inside that transaction, then we have to keep them enabled and keep the FP/VMX/VSX state loaded while ever the transaction continues. The reason is that if we didn't, and subsequently got a FP/VMX/VSX unavailable interrupt inside a transaction, we don't know whether it's the same transaction, and thus we don't know which of the checkpointed state and the ransactional state to use. restore_math() restore_fp() and restore_altivec() currently may not restore the registers. It doesn't appear that this is more serious than a performance penalty. If the math registers aren't restored the userspace thread will still be run with the facility disabled. Userspace will not be able to read invalid values. On the first access it will take an facility unavailable exception and the kernel will detected an active transaction, at which point it will abort the transaction. There is the possibility for a pathological case preventing any progress by transactions, however, transactions are never guaranteed to make progress. Fixes: 70fe3d98 ("powerpc: Restore FPU/VEC/VSX if previously used") Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Gavin Shan authored
This fixes warning reported from sparse: pci-ioda.c:451:49: warning: incorrect type in argument 2 (different base types) Fixes: 262af557 ("powerpc/powernv: Enable M64 aperatus for PHB3") Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Gavin Shan authored
This fixes the warnings reported from sparse: pci.c:312:33: warning: restricted __be64 degrades to integer pci.c:313:33: warning: restricted __be64 degrades to integer Fixes: cee72d5b ("powerpc/powernv: Display diag data on p7ioc EEH errors") Cc: stable@vger.kernel.org # v3.3+ Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Gavin Shan authored
This fixes the warning reported from sparse: eeh-powernv.c:875:23: warning: constant 0x8000000000000000 is so big it is unsigned long Fixes: ebe22531 ("powerpc/powernv: Support PCI slot ID") Suggested-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Gavin Shan authored
The hub diag-data type is filled with big-endian data by OPAL call opal_pci_get_hub_diag_data(). We need convert it to CPU-endian value before using it. The issue is reported by sparse as pointed by Michael Ellerman: eeh-powernv.c:1309:21: warning: restricted __be16 degrades to integer This converts hub diag-data type to CPU-endian before using it in pnv_eeh_get_and_dump_hub_diag(). Fixes: 2a485ad7 ("powerpc/powernv: Drop PHB operation next_error()") Cc: stable@vger.kernel.org # v4.1+ Suggested-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Gavin Shan authored
The PE number (@frozen_pe_no), filled by opal_pci_next_error() is in big-endian format. It should be converted to CPU-endian before it is passed to opal_pci_eeh_freeze_clear() when clearing the frozen state if the PE is invalid one. As Michael Ellerman pointed out, the issue is also detected by sparse: eeh-powernv.c:1541:41: warning: incorrect type in argument 2 (different base types) This passes CPU-endian PE number to opal_pci_eeh_freeze_clear() and it should be part of commit <0f36db77> ("powerpc/eeh: Fix wrong printed PE number"), which was merged to 4.3 kernel. Fixes: 71b540ad ("powerpc/powernv: Don't escalate non-existing frozen PE") Cc: stable@vger.kernel.org # v4.3+ Suggested-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Gavin Shan authored
This replaces of_get_property() with of_property_read_u32() or of_property_read_string() so that we needn't consider the endian issue, the returned value always is in CPU-endian. Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> [mpe: Fold in the change to the "ibm,slot-surprise-pluggable" case] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Andrew Donnellan authored
Rewrite the cxl_guest_init_afu() loop in cxl_of_probe() to use for_each_child_of_node() rather than a hand-coded for loop. Remove the useless of_node_put(afu_np) call after the loop, where it's guaranteed that afu_np == NULL. Reported-by:
SF Markus Elfring <elfring@users.sourceforge.net> Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reviewed-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Frederic Barrat authored
If the capi link is going down while the PSL owns a dirty cache line, any access from the host for that data could lead to an Uncorrectable Error. So when resetting the capi adapter through sysfs, make sure the PSL cache is flushed. It won't help if there are any active Process Elements on the card, as the cache would likely get new dirty cache lines immediately, but if resetting an idle adapter, it should avoid any bad surprises from data left over from terminated Process Elements. Signed-off-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Anton Blanchard authored
We supported POWER7 CPUs for bootstrapping little endian, but the target was always POWER8. Now that POWER7 specific issues are impacting performance, change the default target to POWER8. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Anton Blanchard authored
POWER8 handles unaligned accesses in little endian mode, but commit 0b5e6661 ("powerpc: Don't set HAVE_EFFICIENT_UNALIGNED_ACCESS on little endian builds") disabled it for all. The issue with unaligned little endian accesses is specific to POWER7, so update the Kconfig check to match. Using the stat() testcase from commit a75c380c ("powerpc: Enable DCACHE_WORD_ACCESS on ppc64le"), performance improves 15% on POWER8. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Anton Blanchard authored
I see quite a lot of static branch mispredictions on a simple web serving workload. The issue is in __atomic_add_unless(), called from _atomic_dec_and_lock(). There is no obvious common case, so it is better to let the hardware predict the branch. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Anton Blanchard authored
During context switch, switch_mm() sets our current CPU in mm_cpumask. We can avoid this atomic sequence in most cases by checking before setting the bit. Testing on a POWER8 using our context switch microbenchmark: tools/testing/selftests/powerpc/benchmarks/context_switch \ --process --no-fp --no-altivec --no-vector Performance improves 2%. Signed-off-by:
Anton Blanchard <anton@samba.org> Acked-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Anton Blanchard authored
No real need for this to be pr_warn(), reduce it to pr_info(). Signed-off-by:
Anton Blanchard <anton@samba.org> Acked-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Anton Blanchard authored
We are starting to see i40e adapters in recent machines, so enable it in our configs. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Anton Blanchard authored
Change a few devices and filesystems that are seldom used any more from built in to modules. This reduces our vmlinux about 500kB. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Anton Blanchard authored
When we issue a system reset, every CPU in the box prints an Oops, including a backtrace. Each of these can be quite large (over 4kB) and we may end up wrapping the ring buffer and losing important information. Bump the base size from 128kB to 256kB and the per CPU size from 4kB to 8kB. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Anton Blanchard authored
We see big improvements with the VMX crypto functions (often 10x or more), so enable it as a module. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Anton Blanchard authored
Align the hot loops in our assembly implementation of memset() and backwards_memcpy(). backwards_memcpy() is called from tcp_v4_rcv(), so we might want to optimise this a little more. Signed-off-by:
Anton Blanchard <anton@samba.org> Reviewed-by:
Nick Piggin <npiggin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Nicholas Piggin authored
This was not done before the big patches because I only noticed them afterwards. It has become much easier to see which handlers are branched to from which exception vectors now, and to see exactly what vector space is being used for what. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Nicholas Piggin authored
Simple substitution. This is possible now that both parts of the OOL initial handler get linked into their correct location. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Nicholas Piggin authored
This is not an exception handler as such, it's called from local_irq_enable(), not exception entry. Also clean up some now redundant comments at the end of the consolidation series. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-