- Sep 13, 2021
-
-
Yajun Deng authored
This reverts commit 91948309. There is only when ip_options_get() return zero need to free. It already called kfree() when return error. Fixes: 91948309 ("ipv4: fix memory leaks in ip_cmsg_send() callers") Signed-off-by:
Yajun Deng <yajun.deng@linux.dev> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Bug fixes. The first patch fixes an error recovery regression just introduced about a week ago. The other two patches fix issues related to freeing rings in the bnxt_close() path under error conditions. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
We recently changed the completion ring page arrays to be dynamically allocated to better support the expanded range of ring depths. The cleanup path for this was not quite complete. It might cause the shutdown path to crash if we need to abort before the completion ring arrays have been allocated and initialized. Fix it by initializing the ring_mem->pg_arr to NULL after freeing the completion ring page array. Add a check in bnxt_free_ring() to skip referencing the rmem->pg_arr if it is NULL. Fixes: 03c74487 ("bnxt_en: Don't use static arrays for completion ring pages") Reviewed-by:
Andy Gospodarek <gospo@broadcom.com> Reviewed-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Edwin Peer authored
The call to bnxt_free_mem(..., false) in the bnxt_half_open_nic() error path will deallocate ring descriptor memory via bnxt_free_?x_rings(), but because irq_re_init is false, the ring info itself is not freed. To simplify error paths, deallocation functions have generally been written to be safe when called on unallocated memory. It should always be safe to call dev_close(), which calls bnxt_free_skbs() a second time, even in this semi- allocated ring state. Calling bnxt_free_skbs() a second time with the rings already freed will cause NULL pointer dereference. Fix it by checking the rings are valid before proceeding in bnxt_free_tx_skbs() and bnxt_free_one_rx_ring_skbs(). Fixes: 975bc99a ("bnxt_en: Refactor bnxt_free_rx_skbs().") Signed-off-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The recent patch has introduced a regression by not reading the reset count in the ERROR_RECOVERY async event handler. We may have just gone through a reset and the reset count has just incremented. If we don't update the reset count in the ERROR_RECOVERY event handler, the health check timer will see that the reset count has changed and will initiate an unintended reset. Restore the unconditional update of the reset count in bnxt_async_event_process() if error recovery watchdog is enabled. Also, update the reset count at the end of the reset sequence to make it even more robust. Fixes: 1b2b9183 ("bnxt_en: Fix possible unintended driver initiated error recovery") Reviewed-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Sep 12, 2021
-
-
Len Baker authored
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the struct_size() helper to do the arithmetic instead of the argument "size + count * size" in the kzalloc() function. [1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Signed-off-by:
Len Baker <len.baker@gmx.com> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrea Claudi authored
If altname deletion of the short alternative name fails, the error message printed is: "Failed to add short alternative name". This is obviously a typo, as we are testing altname deletion. Fix this using a proper error message. Fixes: f95e6c9c ("selftest: net: add alternative names test") Signed-off-by:
Andrea Claudi <aclaudi@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ansuel Smith authored
When the mdio legacy mapping is used the mii_bus priv registered by DSA refer to the dsa switch struct instead of the qca8k_priv struct and causes a kernel panic. Create dedicated function when the internal dedicated mdio driver is used to properly handle the 2 different implementation. Fixes: 759bafb8 ("net: dsa: qca8k: add support for internal phy and internal mdio") Signed-off-by:
Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Sep 11, 2021
-
-
Jesper Nilsson authored
The Synopsys Ethernet IP uses the CSR clock as a base clock for MDC. The divisor used is set in the MAC_MDIO_Address register field CR (Clock Rate) The divisor is there to change the CSR clock into a clock that falls below the IEEE 802.3 specified max frequency of 2.5MHz. If the CSR clock is 300MHz, the code falls back to using the reset value in the MAC_MDIO_Address register, as described in the comment above this code. However, 300MHz is actually an allowed value and the proper divider can be estimated quite easily (it's just 1Hz difference!) A CSR frequency of 300MHz with the maximum clock rate value of 0x5 (STMMAC_CSR_250_300M, a divisor of 124) gives somewhere around ~2.42MHz which is below the IEEE 802.3 specified maximum. For the ARTPEC-8 SoC, the CSR clock is this problematic 300MHz, and unfortunately, the reset-value of the MAC_MDIO_Address CR field is 0x0. This leads to a clock rate of zero and a divisor of 42, and gives an MDC frequency of ~7.14MHz. Allow CSR clock of 300MHz by making the comparison inclusive. Signed-off-by:
Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Sep 10, 2021
-
-
Colin Ian King authored
The variable ret is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shai Malin authored
Handle MFW (management FW) error response in order to avoid a crash during recovery flows. Changes from v1: - Add "Fixes tag". Fixes: tag 5e7ba042 ("qed: Fix reading stale configuration information") Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
Shai Malin <smalin@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Baruch Siach authored
Add pr_fmt macro to spell out the source of messages in prefix. Before this patch: packet size is too long (1543 > 1518) With this patch: af_packet: packet size is too long (1543 > 1518) Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
A number of users have reported that they were not able to get the PHY to successfully link up, especially after commit c36757eb ("net: phy: consider AN_RESTART status when reading link status") where we stopped reading just BMSR, but we also read BMCR to determine the link status. Andrius at NetBSD did a wonderful job at debugging the problem and found out that the MDIO bus clock frequency would be incorrectly set back to its default value which would prevent the MDIO bus controller from reading PHY registers properly. Back when we only read BMSR, if we read all 1s, we could falsely indicate a link status, though in general there is a cable plugged in, so this went unnoticed. After a second read of BMCR was added, a wrong read will lead to the inability to determine a link UP condition which is when it started to be visibly broken, even if it was long before that. The fix consists in restoring the value of the MD_CSR register that was set prior to the MAC reset. Link: http://gnats.netbsd.org/cgi-bin/query-pr-single.pl?number=53494 Fixes: 90f750a8 ("r6040: consolidate MAC reset to its own function") Reported-by:
Andrius V <vezhlys@gmail.com> Reported-by:
Darek Strugacz <darek.strugacz@op.pl> Tested-by:
Darek Strugacz <darek.strugacz@op.pl> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dave Ertman authored
There are two cases where the current PF does not support RDMA functionality. The first is if the NVM loaded on the device is set to not support RDMA (common_caps.rdma is false). The second is if the kernel bonding driver has included the current PF in an active link aggregate. When the driver has determined that this PF does not support RDMA, then auxiliary devices should not be created on the auxiliary bus. Without a device on the auxiliary bus, even if the irdma driver is present, there will be no RDMA activity attempted on this PF. Currently, in the reset flow, an attempt to create auxiliary devices is performed without regard to the ability of the PF. There needs to be a check in ice_aux_plug_dev (as the central point that creates auxiliary devices) to see if the PF is in a state to support the functionality. When disabling and re-enabling RDMA due to the inclusion/removal of the PF in a link aggregate, we also need to set/clear the bit which controls auxiliary device creation so that a reset recovery in a link aggregate situation doesn't try to create auxiliary devices when it shouldn't. Fixes: f9f5301e ("ice: Register auxiliary device to provide RDMA") Reported-by:
Yongxin Liu <yongxin.liu@windriver.com> Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Sep 09, 2021
-
-
Guenter Roeck authored
Building alpha:allmodconfig results in the following error. drivers/net/ethernet/amd/ni65.c: In function 'ni65_stop_start': drivers/net/ethernet/amd/ni65.c:751:37: error: cast from pointer to integer of different size buffer[i] = (u32) isa_bus_to_virt(tmdp->u.buffer); 'buffer[]' is declared as unsigned long, so replace the typecast to u32 with a typecast to unsigned long to fix the problem. Cc: Arnd Bergmann <arnd@kernel.org> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Íñigo Huguet says: ==================== sfc: fallback for lack of xdp tx queues If there are not enough hardware resources to allocate one tx queue per CPU for XDP, XDP_TX and XDP_REDIRECT actions were unavailable, and using them resulted each time with the packet being drop and this message in the logs: XDP TX failed (-22) These patches implement 2 fallback solutions for 2 different situations that might happen: 1. There are not enough free resources for all the tx queues, but there are some free resources available 2. There are not enough free resources at all for tx queues. Both solutions are based in sharing tx queues, using __netif_tx_lock for synchronization. In the second case, as there are not XDP TX queues to share, network stack queues are used instead, but since we're taking __netif_tx_lock, concurrent access to the queues is correctly protected. The solution for this second case might affect performance both of XDP traffic and normal traffice due to lock contention if both are used intensively. That's why I call it a "last resort" fallback: it's not a desirable situation, but at least we have XDP TX working. Some tests has shown good results and indicate that the non-fallback case is not being damaged by this changes. They are also promising for the fallback cases. This is the test: 1. From another machine, send high amount of packets with pktgen, script samples/pktgen/pktgen_sample04_many_flows.sh 2. In the tested machine, run samples/bpf/xdp_rxq_info with arguments "-a XDP_TX --swapmac" and see the results 3. In the tested machine, run also pktgen_sample04 to create high TX normal traffic, and see how xdp_rxq_info results vary Note that this test doesn't check the worst situations for the fallback solutions because XDP_TX will only be executed from the same CPUs that are processed by sfc, and not from every CPU in the system, so the performance drop due to the highest locking contention doesn't happen. I'd like to test that, as well, but I don't have access right now to a proper environment. Test results: Without doing TX: Before changes: ~2,900,000 pps After changes, 1 queues/core: ~2,900,000 pps After changes, 2 queues/core: ~2,900,000 pps After changes, 8 queues/core: ~2,900,000 pps After changes, borrowing from network stack: ~2,900,000 pps With multiflow TX at the same time: Before changes: ~1,700,000 - 2,900,000 pps After changes, 1 queues/core: ~1,700,000 - 2,900,000 pps After changes, 2 queues/core: ~1,700,000 pps After changes, 8 queues/core: ~1,700,000 pps After changes, borrowing from network stack: 1,150,000 pps Sporadic "XDP TX failed (-5)" warnings are shown when running xdp program and pktgen simultaneously. This was expected because XDP doesn't have any buffering system if the NIC is under very high pressure. Thousands of these warnings are shown in the case of borrowing net stack queues. As I said before, this was also expected. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Íñigo Huguet authored
Previous patch addressed the situation of having some free resources for xdp tx but not enough for one tx queue per CPU. This patch address the worst case of not having resources at all for xdp tx. Instead of using queues dedicated to xdp, normal queues used by network stack are shared for both cases, using __netif_tx_lock for synchronization. Also queue stop/restart must be considered in the xdp path to avoid freezing the queue. This is not the ideal situation we might want to be, and a performance penalty is expected both for normal and xdp traffic, but at least XDP will work in all possible situations (with a warning in the logs), improving a bit the pain of not knowing in what situations we can use it and in what situations we cannot. Signed-off-by:
Íñigo Huguet <ihuguet@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Íñigo Huguet authored
If there are not enough resources to allocate one TX queue per core for XDP TX it was completely disabled. This patch implements a fallback solution for sharing the available queues using __netif_tx_lock for synchronization. In the normal case that there is one TX queue per CPU, no locking is done, as it was before. With this fallback solution, XDP TX will work in much more cases that were failing, specially in machines with many CPUs. It's hard for XDP users to know what features are supported across different NICs and configurations, so they will benefit on having wider support. Signed-off-by:
Íñigo Huguet <ihuguet@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joakim Zhang authored
Use __maybe_unused for noirq_suspend()/noirq_resume() hooks to avoid build warning with !CONFIG_PM_SLEEP: >> drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:796:12: error: 'stmmac_pltfr_noirq_resume' defined but not used [-Werror=unused-function] 796 | static int stmmac_pltfr_noirq_resume(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~ >> drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:775:12: error: 'stmmac_pltfr_noirq_suspend' defined but not used [-Werror=unused-function] 775 | static int stmmac_pltfr_noirq_suspend(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Fixes: 276aae37 ("net: stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xiyu Yang authored
The reference count leak issue may take place in an error handling path. If both conditions of tunnel->version == L2TP_HDR_VER_3 and the return value of l2tp_v3_ensure_opt_in_linear is nonzero, the function would directly jump to label invalid, without decrementing the reference count of the l2tp_session object session increased earlier by l2tp_tunnel_get_session(). This may result in refcount leaks. Fix this issue by decrease the reference count before jumping to the label invalid. Fixes: 4522a70d ("l2tp: fix reading optional fields of L2TPv3") Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by:
Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
syzbot reported another data-race in af_unix [1] Lets change __skb_insert() to use WRITE_ONCE() when changing skb head qlen. Also, change unix_dgram_poll() to use lockless version of unix_recvq_full() It is verry possible we can switch all/most unix_recvq_full() to the lockless version, this will be done in a future kernel version. [1] HEAD commit: 8596e589 BUG: KCSAN: data-race in skb_queue_tail / unix_dgram_poll write to 0xffff88814eeb24e0 of 4 bytes by task 25815 on cpu 0: __skb_insert include/linux/skbuff.h:1938 [inline] __skb_queue_before include/linux/skbuff.h:2043 [inline] __skb_queue_tail include/linux/skbuff.h:2076 [inline] skb_queue_tail+0x80/0xa0 net/core/skbuff.c:3264 unix_dgram_sendmsg+0xff2/0x1600 net/unix/af_unix.c:1850 sock_sendmsg_nosec net/socket.c:703 [inline] sock_sendmsg net/socket.c:723 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2392 ___sys_sendmsg net/socket.c:2446 [inline] __sys_sendmmsg+0x315/0x4b0 net/socket.c:2532 __do_sys_sendmmsg net/socket.c:2561 [inline] __se_sys_sendmmsg net/socket.c:2558 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2558 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88814eeb24e0 of 4 bytes by task 25834 on cpu 1: skb_queue_len include/linux/skbuff.h:1869 [inline] unix_recvq_full net/unix/af_unix.c:194 [inline] unix_dgram_poll+0x2bc/0x3e0 net/unix/af_unix.c:2777 sock_poll+0x23e/0x260 net/socket.c:1288 vfs_poll include/linux/poll.h:90 [inline] ep_item_poll fs/eventpoll.c:846 [inline] ep_send_events fs/eventpoll.c:1683 [inline] ep_poll fs/eventpoll.c:1798 [inline] do_epoll_wait+0x6ad/0xf00 fs/eventpoll.c:2226 __do_sys_epoll_wait fs/eventpoll.c:2238 [inline] __se_sys_epoll_wait fs/eventpoll.c:2233 [inline] __x64_sys_epoll_wait+0xf6/0x120 fs/eventpoll.c:2233 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000001b -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 25834 Comm: syz-executor.1 Tainted: G W 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 86b18aaa ("skbuff: fix a data race in skb_queue_len()") Cc: Qian Cai <cai@lca.pw> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tong Zhang authored
plat_dev->dev->platform_data is released by platform_device_unregister(), use of pclk and hclk is a use-after-free. Since device unregister won't need a clk device we adjust the function call sequence to fix this issue. [ 31.261225] BUG: KASAN: use-after-free in macb_remove+0x77/0xc6 [macb_pci] [ 31.275563] Freed by task 306: [ 30.276782] platform_device_release+0x25/0x80 Suggested-by:
Nicolas Ferre <Nicolas.Ferre@microchip.com> Signed-off-by:
Tong Zhang <ztong0001@gmail.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sukadev Bhattiprolu authored
If a failover occurs before a login response is received, the login response buffer maybe undefined. Check that there was no failover before accessing the login response buffer. Fixes: 032c5e82 ("Driver for IBM System i/p VNIC protocol") Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
If the sendmsg() call in vhost_tx_batch() fails, both the 'batched_xdp' and 'done_idx' indexes are left unchanged. If such failure happens when batched_xdp == VHOST_NET_BATCH, the next call to vhost_net_build_xdp() will access and write memory outside the xdp buffers area. Since sendmsg() can only error with EBADFD, this change addresses the issue explicitly freeing the XDP buffers batch on error. Fixes: 0a0be13b ("vhost_net: batch submitting XDP buffers to underlayer sockets") Suggested-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Sep 08, 2021
-
-
Joakim Zhang authored
commit 5f585913 ("net: stmmac: delete the eee_ctrl_timer after napi disabled"), this patch tries to fix system hang caused by eee_ctrl_timer, unfortunately, it only can resolve it for system reboot stress test. System hang also can be reproduced easily during system suspend/resume stess test when mount NFS on i.MX8MP EVK board. In stmmac driver, eee feature is combined to phylink framework. When do system suspend, phylink_stop() would queue delayed work, it invokes stmmac_mac_link_down(), where to deactivate eee_ctrl_timer synchronizly. In above commit, try to fix issue by deactivating eee_ctrl_timer obviously, but it is not enough. Looking into eee_ctrl_timer expire callback stmmac_eee_ctrl_timer(), it could enable hareware eee mode again. What is unexpected is that LPI interrupt (MAC_Interrupt_Enable.LPIEN bit) is always asserted. This interrupt has chance to be issued when LPI state entry/exit from the MAC, and at that time, clock could have been already disabled. The result is that system hang when driver try to touch register from interrupt handler. The reason why above commit can fix system hang issue in stmmac_release() is that, deactivate eee_ctrl_timer not just after napi disabled, further after irq freed. In conclusion, hardware would generate LPI interrupt when clock has been disabled during suspend or resume, since hardware is in eee mode and LPI interrupt enabled. Interrupts from MAC, MTL and DMA level are enabled and never been disabled when system suspend, so postpone clocks management from suspend stage to noirq suspend stage should be more safe. Fixes: 5f585913 ("net: stmmac: delete the eee_ctrl_timer after napi disabled") Signed-off-by:
Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alex Elder authored
There is an off-by-one problem in ipa_table_init_add(), when initializing filter tables. In that function, the number of filter table entries is determined based on the number of set bits in the filter map. However that count does *not* include the extra "slot" in the filter table that holds the filter map itself. Meanwhile, ipa_table_addr() *does* include the filter map in the memory it returns, but because the count it's provided doesn't include it, it includes one too few table entries. Fix this by including the extra slot for the filter map in the count computed in ipa_table_init_add(). Note: ipa_filter_reset_table() does not have this problem; it resets filter table entries one by one, but does not overwrite the filter bitmap. Fixes: 2b9feef2 ("soc: qcom: ipa: filter and routing tables") Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nathan Rossi authored
Currently changes to the advertising state via ethtool do not cause any reselection of the configured interface mode after the SFP is already inserted and initially configured. While it is not typical to change the advertised link modes for an interface using an SFP in certain use cases it is desirable. In the case of a SFP port that is capable of handling both SFP and SFP+ modules it will automatically select between 1G and 10G modes depending on the supported mode of the SFP. However if the SFP module is capable of working in multiple modes (e.g. a SFP+ DAC that can operate at 1G or 10G), one end of the cable may be attached to a SFP 1000base-x port thus the SFP+ end must be manually configured to the 1000base-x mode in order for the link to be established. This change causes the ethtool setting of advertised mode changes to reselect the interface mode so that the link can be established. Additionally when a module is inserted the advertising mode is reset to match the supported modes of the module. Signed-off-by:
Nathan Rossi <nathan.rossi@digi.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
Geert noticed a warning on MIPS TX49xx, Atari and presuambly other platforms when the driver is built-in but NETDEV_LEGACY_INIT is disabled: drivers/net/ethernet/8390/ne.c:909:20: warning: ‘ne_add_devices’ defined but not used [-Wunused-function] Merge the two module init functions into a single one with an IS_ENABLED() check to replace the incorrect #ifdef. Fixes: 4228c394 ("make legacy ISA probe optional") Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Geert Uytterhoeven <geert@linux-m68k.org> Tested-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5 fixes 2021-09-07 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. Included here, a patch which solves a build warning reported on linux-kernel mailing list [1]: Fix commit ("net/mlx5: Bridge, fix uninitialized variable usage") I hope this series can make it to rc1. [1] https://www.spinics.net/lists/netdev/msg765481.html ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sukadev Bhattiprolu authored
If a failover occurs before a login response is received, the login response buffer maybe undefined. Check that there was no failover before accessing the login response buffer. Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jeremy Kerr authored
The kernel test robot reports: [ 843.509974][ T345] ============================= [ 843.524220][ T345] WARNING: suspicious RCU usage [ 843.538791][ T345] 5.14.0-rc2-00606-g889b7da23abf #1 Not tainted [ 843.553617][ T345] ----------------------------- [ 843.567412][ T345] net/mctp/route.c:310 RCU-list traversed in non-reader section!! - we're missing the rcu read lock acquire around the destruction path. This change adds the acquire/release - the path is already atomic, and we're using the _rcu list iterators. Reported-by:
kernel test robot <oliver.sang@intel.com> Signed-off-by:
Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lin, Zhenpeng authored
Commit 2677d206 ("dccp: don't free ccid2_hc_tx_sock ...") fixed a UAF but reintroduced CVE-2017-6074. When the sock is cloned, two dccps_hc_tx_ccid will reference to the same ccid. So one can free the ccid object twice from two socks after cloning. This issue was found by "Hadar Manor" as well and assigned with CVE-2020-16119, which was fixed in Ubuntu's kernel. So here I port the patch from Ubuntu to fix it. The patch prevents cloned socks from referencing the same ccid. Fixes: 2677d206 ("dccp: don't free ccid2_hc_tx_sock ...") Signed-off-by:
Zhenpeng Lin <zplin@psu.edu> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Samuel Holland authored
The D1 SoC contains EMAC hardware which is compatible with the A64 EMAC. Add the new compatible string, with the A64 as a fallback. Signed-off-by:
Samuel Holland <samuel@sholland.org> Acked-by:
Maxime Ripard <maxime@cerno.tech> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Aya Levin authored
When activating the PTP-RQ, redirect the RQT from drop-RQ to PTP-RQ. Use mlx5e_channels_get_ptp_rqn to retrieve the rqn. This helper returns a boolean (not status), hence caller should consider return value 0 as a fail. Change the caller interpretation of the return value. Fixes: 43ec0f41 ("net/mlx5e: Hide all implementation details of mlx5e_rx_res") Signed-off-by:
Aya Levin <ayal@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Aya Levin authored
Some profiles of the driver don't support a dedicated PTP-RQ, hence can't support HW TS and CQE compression simultaneously. When HW TS is enabled the COE compression is disabled, and should be restored when the HW TS is turned off. Add rx_filter as an input to modifying CQE compression to enforce this restriction. Fixes: 256f79d1 ("net/mlx5e: Fix HW TS with CQE compression according to profile") Signed-off-by:
Aya Levin <ayal@nvidia.com> Reviewed-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Maor Gottlieb authored
Fixes the below flow of sleeping in atomic context by releasing the RCU lock before calling to free_match_list. build_match_list() <- disables preempt -> free_match_list() -> tree_put_node() -> down_write_ref_node() <- take write lock Fixes: 693c6883 ("net/mlx5: Add hash table for flow groups in flow table") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Maor Gottlieb <maorg@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Saeed Mahameed authored
Handle error flow on mlx5_core_alloc_pd() failure, read_fw_strings_work must be canceled. Fixes: c71ad41c ("net/mlx5: FW tracer, events handling") Reported-by:
Pavel Machek (CIP) <pavel@denx.de> Suggested-by:
Pavel Machek (CIP) <pavel@denx.de> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Reviewed-by:
Aya Levin <ayal@nvidia.com>
-
Mark Bloch authored
In NICs that don't support LAG, the LAG control structure won't be allocated. If it wasn't allocated it means LAG doesn't exists and can be skipped. Fixes: cac1eb2c ("net/mlx5: Lag, properly lock eswitch if needed") Signed-off-by:
Mark Bloch <mbloch@nvidia.com> Reviewed-by:
Maor Gottlieb <maorg@nvidia.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Parav Pandit authored
RDMA auxdev parameter registration was skipped for eswitch manager PCI PF. Due to this when devlink parameter is read, it reads as false in below code flow. $ devlink dev reload pci/0000:06:00.0 devlink_reload() mlx5_load_one() mlx5_attach_device() is_ib_enabled() devlink_param_driverinit_value_get() Due to this, is_ib_enabled() returns false for the RDMA auxiliary device. This results into a skipping RDMA auxiliary device creation on reload. There is no need to check for eswitch manager capability to support RDMA auxiliary device. Hence, fix it by skipping eswitch manager capability. Fixes: 87158ced ("net/mlx5: Support enable_rdma devlink dev param") Signed-off-by:
Parav Pandit <parav@nvidia.com> Reviewed-by:
Shay Drory <shayd@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Vlad Buslov authored
In some conditions variable 'err' is not assigned with value in mlx5_esw_bridge_port_obj_attr_set() and mlx5_esw_bridge_port_changeupper() functions after recent changes to support LAG. Initialize the variable with zero value in both cases. Reported-by:
Colin King <colin.king@canonical.com> Reported-by:
Tim Gardner <tim.gardner@canonical.com> Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> CC: linux-kernel@vger.kernel.org Fixes: ff9b7521 ("net/mlx5: Bridge, support LAG") Signed-off-by:
Vlad Buslov <vladbu@nvidia.com>
-