- Jan 18, 2015
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "We've been sitting on our fixes branch for a while, so this batch is unfortunately on the large side. A lot of these are tweaks and fixes to device trees, fixing various bugs around clocks, reg ranges, etc. There's also a few defconfig updates (which are on the late side, no more of those). All in all the diffstat is bigger than ideal at this time, but nothing in here seems particularly risky" * tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) reset: sunxi: fix spinlock initialization ARM: dts: disable CCI on exynos5420 based arndale-octa drivers: bus: check cci device tree node status ARM: rockchip: disable jtag/sdmmc autoswitching on rk3288 ARM: nomadik: fix up leftover device tree pins ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree ARM: at91/dt: sam9263: Add missing clocks to lcdc node ARM: at91: sama5d3: dt: correct the sound route ARM: at91/dt: sama5d4: fix the timer reg length ARM: exynos_defconfig: Enable LM90 driver ARM: exynos_defconfig: Enable options for display panel support arm: dts: Use pmu_system_controller phandle for dp phy ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances ARM: dts: berlin: correct BG2Q's SM GPIO location. ARM: dts: berlin: add broken-cd and set bus width for eMMC in Marvell DMP DT ARM: dts: berlin: fix io clk and add missing core clk for BG2Q sdhci2 host ARM: dts: Revert disabling of smc91x for n900 ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling ARM: dts: dra7-evm: fix qspi device tree partition size ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DT ...
-
git://git.linaro.org/people/mike.turquette/linuxLinus Torvalds authored
Pull clock driver fixes from Mike Turquette: "Small number of fixes for clock drivers and a single null pointer dereference fix in the framework core code. The driver fixes vary from fixing section mismatch warnings to preventing machines from hanging (and preventing developers from crying)" * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux: clk: fix possible null pointer dereference Revert "clk: ppc-corenet: Fix Section mismatch warning" clk: rockchip: fix deadlock possibility in cpuclk clk: berlin: bg2q: remove non-exist "smemc" gate clock clk: at91: keep slow clk enabled to prevent system hang clk: rockchip: fix rk3288 cpuclk core dividers clk: rockchip: fix rk3066 pll lock bit location clk: rockchip: Fix clock gate for rk3188 hclk_emem_peri clk: rockchip: add CLK_IGNORE_UNUSED flag to fix rk3066/rk3188 USB Host
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is one fix for a Multiqueue sleeping in invalid context problem and a MAINTAINER file update for Qlogic" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ->queue_rq can't sleep MAINTAINERS: Update maintainer list for qla4xxx
-
Stanimir Varbanov authored
The commit 646cafc6 (clk: Change clk_ops->determine_rate to return a clk_hw as the best parent) opens a possibility for null pointer dereference, fix this. Signed-off-by:
Stanimir Varbanov <svarbanov@mm-sol.com> Reviewed-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Michael Turquette <mturquette@linaro.org>
-
Kevin Hao authored
This reverts commit da788acb . That commit tried to fix the section mismatch warning by moving the ppc_corenet_clk_driver struct to init section. This is definitely wrong because the kernel would free the memories occupied by this struct after boot while this driver is still registered in the driver core. The kernel would panic when accessing this driver struct. Cc: stable@vger.kernel.org # 3.17 Signed-off-by:
Kevin Hao <haokexin@gmail.com> Acked-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
Michael Turquette <mturquette@linaro.org>
-
Heiko Stübner authored
Lockdep reported a possible deadlock between the cpuclk lock and for example the i2c driver. CPU0 CPU1 ---- ---- lock(clk_lock); local_irq_disable(); lock(&(&i2c->lock)->rlock); lock(clk_lock); <Interrupt> lock(&(&i2c->lock)->rlock); *** DEADLOCK *** The generic clock-types of the core ccf already use spin_lock_irqsave when touching clock registers, so do the same for the cpuclk. Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Reviewed-by:
Doug Anderson <dianders@chromium.org> Signed-off-by:
Michael Turquette <mturquette@linaro.org> [mturquette@linaro.org: removed initialization of "flags"]
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: "Two patches, the first by Andy to fix dw dmac runtime pm and second one by me to fix the dmaengine headers in MAINTAINERS" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: dw: balance PM runtime calls MAINTAINERS: dmaengine: fix the header file for dmaengine
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also two PMU driver fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools powerpc: Use dwfl_report_elf() instead of offline. perf tools: Fix segfault for symbol annotation on TUI perf test: Fix dwarf unwind using libunwind. perf tools: Avoid build splat for syscall numbers with uclibc perf tools: Elide strlcpy warning with uclibc perf tools: Fix statfs.f_type data type mismatch build error with uclibc tools: Remove bitops/hweight usage of bits in tools/perf perf machine: Fix __machine__findnew_thread() error path perf tools: Fix building error in x86_64 when dwarf unwind is on perf probe: Propagate error code when write(2) failed perf/x86/intel: Fix bug for "cycles:p" and "cycles:pp" on SLM perf/rapl: Fix sysfs_show() initialization for RAPL PMU
-
- Jan 17, 2015
-
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix segfault when using both the map symtab viewer and annotation in the TUI (Namhyung Kim). - uClibc build fixes (Alexey Brodkin, Vineet Gupta). - bitops/hweight were moved from tools/perf/ too tools/include, move some leftovers (Arnaldo Carvalho de Melo) - Fix dwarf unwind x86_64 build error (Namhyung Kim) - Fix __machine__findnew_thread() error path (Namhyung Kim) - Propagate error code when write(2) failed in 'perf probe' (Namhyung Kim) - Use dwfl_report_elf() instead of offline in powerpc bits to properly handle non prelinked DSOs (Sukadev Bhattiprolu). - Fix dwarf unwind using libunwind in 'perf test' (Wang Nan) Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Olof Johansson authored
Merge tag 'samsung-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung fixes for v3.19" from Kukjin Kim: Samsung fixes for v3.19 - exynos_defconfig: enable LM90 driver and display panel support - HWMON - SENSORS_LM90 - Direct Rendering Manager (DRM) - DRM bridge registration and lookup framework - Parade ps8622/ps8625 eDP/LVDS bridge - NXP ptn3460 eDP/LVDS bridge - Exynos Fully Interactive Mobile Display controller (FIMD) - Panel registration and lookup framework - Simple panels - Backlight & LCD device support - use pmu_system_controller phandle for dp phy : DP PHY requires pmu_system_controller to handle PMU reg. now * tag 'samsung-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: exynos_defconfig: Enable LM90 driver ARM: exynos_defconfig: Enable options for display panel support arm: dts: Use pmu_system_controller phandle for dp phy Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Tyler Baker authored
Call spin_lock_init() before the spinlocks are used, both in early init and probe functions preventing a lockdep splat. I have been observing lockdep complaining [1] during boot on my a80 optimus [2] when CONFIG_PROVE_LOCKING has been enabled. This patch resolves the splat, and has been tested on a few other sunxi platforms without issue. [1] http://storage.kernelci.org/next/next-20150107/arm-multi_v7_defconfig+CONFIG_PROVE_LOCKING=y/lab-tbaker/boot-sun9i-a80-optimus.html [2] http://kernelci.org/boot/?a80-optimus Signed-off-by:
Tyler Baker <tyler.baker@linaro.org> Cc: <stable@vger.kernel.org> Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'renesas-soc-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Merge "Renesas ARM Based SoC Fixes for v3.19" from Simon Horman: Renesas ARM Based SoC Fixes for v3.19 This pull request is based on the last round of SoC updates for v3.19, Fourth Round of Renesas ARM Based SoC Updates for v3.19, tagged as renesas-soc3-for-v3.19, merged into your next/soc branch and included in v3.19-rc1. - ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds Set .control_parent for all irqpin instances for sh73a0 SoC when booting using legacy C. - ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds This fixes a long standing problem which has been present since the sh73a0 SoC started using the INTC External IRQ pin driver. The patch that introduced the problem is 341eb546 ("ARM: shmobile: INTC External IRQ pin driver on sh73a0") which was included in v3.10. * tag 'renesas-soc-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds
-
Abhilash Kesavan authored
The arndale-octa board was giving "imprecise external aborts" during boot-up with MCPM enabled. CCI enablement of the boot cluster was found to be the cause of these aborts (possibly because the secure f/w was not allowing it). Hence, disable CCI for the arndale-octa board. Signed-off-by:
Abhilash Kesavan <a.kesavan@samsung.com> Tested-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by:
Kevin Hilman <khilman@linaro.org> Tested-by:
Tyler Baker <tyler.baker@linaro.org> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Abhilash Kesavan authored
The arm-cci driver completes the probe sequence even if the cci node is marked as disabled. Add a check in the driver to honour the cci status in the device tree. Signed-off-by:
Abhilash Kesavan <a.kesavan@samsung.com> Acked-by:
Sudeep Holla <sudeep.holla@arm.com> Acked-by:
Nicolas Pitre <nico@linaro.org> Tested-by:
Sudeep Holla <sudeep.holla@arm.com> Tested-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes Merge "at91: fixes for 3.19 #1 (ter)" from Nicolas Ferre: First fixes batch for AT91 on 3.19: - fix some DT entries - correct clock entry for the at91sam9263 LCD - add a phy_fixup for Eth1 on sama5d4 * tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree ARM: at91/dt: sam9263: Add missing clocks to lcdc node ARM: at91: sama5d3: dt: correct the sound route ARM: at91/dt: sama5d4: fix the timer reg length Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Heiko Stübner authored
rk3288 SoCs have a function to automatically switch between jtag/sdmmc pinmux settings depending on the card state. This collides with a lot of assumptions. It only works when using the internal card-detect mechanism and breaks horribly when using either the normal card-detect via the slot-gpio function or via any other pin. Also there is of course no link between the mmc and jtag on the software-side, so the jtag clocks may very well be disabled when the card is ejected and the soc switches back to the jtag pinmux. Leaving the switching function enabled did result in mmc timeouts and rcu stalls thus hanging the system on 3.19-rc1. Therefore disable it in all cases, as we expect the devicetree to explicitly select either mmc or jtag pinmuxes anyway. Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'berlin-fixes-for-3.19-1' of git://git.infradead.org/users/hesselba/linux-berlin into fixes Merge "ARM: berlin: Fixes for v3.19 (round 1)" from Sebastian Hesselbarth: Marvell Berlin fixes for v3.19 round 1: - SDHCI DT fixes for BG2Q and BG2Q reference board - BG2Q SM GPIO DT node relocation * tag 'berlin-fixes-for-3.19-1' of git://git.infradead.org/users/hesselba/linux-berlin: ARM: dts: berlin: correct BG2Q's SM GPIO location. ARM: dts: berlin: add broken-cd and set bus width for eMMC in Marvell DMP DT ARM: dts: berlin: fix io clk and add missing core clk for BG2Q sdhci2 host Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Linus Walleij authored
We altered the device tree bindings for the Nomadik family of pin controllers to be standard, this file was merged out-of-order so we missed fixing this. Fix it up. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'omap-for-v3.19/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "omap fixes against v3.19-rc1" from Tony Lindgren: Fixes for omaps mostly to deal with dra7 timer issues and hypervisor mode. The other fixes are minor fixes for various boards. The summary of the fixes is: - Fix real-time counter rate typos for some frequencies - Fix counter frequency drift for am572x - Fix booting of secondary CPU in HYP mode - Fix n900 board name for legacy user space - Fix cpufreq in omap2plus_defconfig after Kconfig change - Fix dra7 qspi partitions And also, let's re-enable smc91x on some n900 boards that we have sitting in a few test boot systems after the boot loader dependencies got fixed. * tag 'omap-for-v3.19/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Revert disabling of smc91x for n900 ARM: dts: dra7-evm: fix qspi device tree partition size ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DT ARM: OMAP2+: Fix n900 board name for legacy user space ARM: omap5/dra7xx: Enable booting secondary CPU in HYP mode ARM: dra7xx: Fix counter frequency drift for AM572x errata i856 ARM: omap5/dra7xx: Fix frequency typos Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'imx-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "ARM: imx: fixes for 3.19" from Shawn Guo: The i.MX fixes for 3.19: - One fix for incorrect i.MX25 SPI1 clock assignment in device tree, which causes system hang when accessing SPI1. - Correct i.MX6SX QSPI parent clock configuration to fix a kernel Oops. - Fix ULPI PHY reset modelling on imx51-babbage board to remove the dependency on bootloader for USB3317 ULPI PHY reset. - Correct video divider setting on i.MX6Q rev T0 1.0 to fix the issue that HDMI is not working at high resolution on T0 1.0. - One incremental fix for CODA960 VPU enabling in device tree to correct interrupt order. - LS1021A SCFG block works in BE mode, add device tree property big-endian to make it right. * tag 'imx-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling ARM: imx6sx: Set PLL2 as parent of QSPI clocks ARM: dts: imx25: Fix the SPI1 clocks ARM: clk-imx6q: fix video divider for rev T0 1.0 ARM: dts: imx6qdl: Fix CODA960 interrupt order ARM: ls1021a: dtsi: add 'big-endian' property for scfg node Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'v3.19-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Merge "ARM: rockchip: dts fix for 3.19" from Heiko Stübner: Increase drive-strength to sdmmc pins on rk3288-evb to fix an issue with the fixed highspeed card detection. * tag 'v3.19-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: bump sd card pin drive strength up on rk3288-evb Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Louis Langholtz authored
Avoid overflow possibility. [ The overflow is purely theoretical, since this is used for memory ranges that aren't even close to using the full 64 bits, but this is the right thing to do regardless. - Linus ] Signed-off-by:
Louis Langholtz <lou_langholtz@me.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Peter Anvin <hpa@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Sukadev Bhattiprolu authored
dwfl_report_offline() works only when libraries are prelinked. Replace dwfl_report_offline() with dwfl_report_elf() so we correctly extract debug info even from libraries that are not prelinked. Reported-by:
Jiri Olsa <jolsa@redhat.com> Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Tested-by:
Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Link: http://lkml.kernel.org/r/20150114221045.GA17703@us.ibm.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Namhyung Kim authored
Currently the symbol structure is allocated with symbol_conf.priv_size to carry sideband information like annotation, map browser on TUI and sort-by-name tree node. So retrieving these information from symbol needs to care about the details of such placement. However the annotation code just assumes that the symbol is placed after the struct annotation. But actually there's other info between them. So accessing those struct will lead to an undefined behavior (usually a crash) after they write their info to the same location. To reproduce the problem, please follow the steps below: 1. run perf report (TUI of course) with -v option 2. open map browser (by pressing right arrow key for any entry) 3. search any function (by pressing '/' key and input whatever..) 4. return to the hist browser (by pressing 'q' or left arrow key) 5. open annotation window for the same entry (by pressing 'a' key) Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1421234288-22758-1-git-send-email-namhyung@kernel.org Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Wang Nan authored
Perf tool fails to unwind user stack if the event raises in a shared object. This patch improves tests/dwarf-unwind.c to demonstrate the problem by utilizing commonly used glibc function "bsearch". If perf is not statically linked, the testcase will try to unwind a mixed call trace. By debugging libunwind I found that there is a bug in unwind-libunwind: it always passes 0 as segbase to libunwind, cause libunwind unable to locate debug_frame entry fir first level ip address (I add some more debugging output into libunwind to make things clear): >_Uarm_dwarf_find_debug_frame: start_ip = 10be98, end_ip = 10c2a4 >_Uarm_dwarf_find_debug_frame: found debug_frame table `/lib/libc-2.18.so': segbase=0x0, len=7, gp=0x0, table_data=0x449388 >_Uarm_dwarf_search_unwind_table: call lookup:ip = b6cd3bcc, segbase = 0, rel_ip = b6cd3bcc >lookup: e->start_ip_offset = bcf18 (rel_ip = b6cd3bcc) >lookup: e->start_ip_offset = 6d314 (rel_ip = b6cd3bcc) >lookup: e->start_ip_offset = 33d0c (rel_ip = b6cd3bcc) ... >lookup: e->start_ip_offset = 15d0c (rel_ip = b6cd3bcc) >lookup: e->start_ip_offset = 15c40 (rel_ip = b6cd3bcc) >_Uarm_dwarf_search_unwind_table: IP b6cd3bcc inside range b6c12000-b6d4c000, but no explicit unwind info found >put_rs_cache: unmasking signals/interrupts and releasing lock >_Uarm_dwarf_step: returning -10 >_Uarm_step: dwarf_step()=-10 This patch passes map->start as segbase to dwarf_find_debug_frame(), so di will be initialized correctly. In addition, dso and executable are different when setting segbase. This patch first check whether the elf is executable, and pass segbase only for shared object. Signed-off-by:
Wang Nan <wangnan0@huawei.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1421203007-75799-1-git-send-email-wangnan0@huawei.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Vineet Gupta authored
This is due to duplicated unistd inclusion (via uClibc headers + kernel headers) Also seen on ARM uClibc based tools ------- ARC build ---------->8------------- CC util/evlist.o In file included from ~/arc/k.org/arch/arc/include/uapi/asm/unistd.h:25:0, from util/../perf-sys.h:10, from util/../perf.h:15, from util/event.h:7, from util/event.c:3: ~/arc/k.org/include/uapi/asm-generic/unistd.h:906:0: warning: "__NR_fcntl64" redefined [enabled by default] #define __NR_fcntl64 __NR3264_fcntl ^ In file included from ~/arc/gnu/INSTALL_1412-arc-2014.12-rc1/arc-snps-linux-uclibc/sysroot/usr/include/sys/syscall.h:24:0, from util/../perf-sys.h:6, ----------------->8------------------- ------- ARM build ---------->8------------- CC FPIC plugin_scsi.o In file included from util/../perf-sys.h:9:0, from util/../perf.h:15, from util/cache.h:7, from perf.c:12: ~/arc/k.org/arch/arm/include/uapi/asm/unistd.h:28:0: warning: "__NR_restart_syscall" redefined [enabled by default] In file included from ~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/sys/syscall.h:25:0, from util/../perf-sys.h:6, from util/../perf.h:15, from util/cache.h:7, from perf.c:12: ~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/bits/sysnum.h:17:0: note: this is the location of the previous definition ----------------->8------------------- Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1421156604-30603-4-git-send-email-vgupta@synopsys.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Vineet Gupta authored
----------------->8------------------ CC bench/sched-pipe.o In file included from builtin-annotate.c:13:0: util/cache.h:76:15: warning: redundant redeclaration of 'strlcpy' [-Wredundant-decls] extern size_t strlcpy(char *dest, const char *src, size_t size); ^ In file included from util/util.h:55:0, from builtin.h:4, from builtin-annotate.c:8: ~/vineetg/arc/gnu/INSTALL_1412-arc-2014.12-rc1/arc-snps-linux-uclibc/sysroot/usr/include/string.h:396:15: note: previous declaration of 'strlcpy' was here extern size_t strlcpy(char *__restrict dst, const char *__restrict src, ----------------->8------------------ Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1421156604-30603-3-git-send-email-vgupta@synopsys.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Alexey Brodkin authored
ARC Linux uses the no legacy syscalls abi and corresponding uClibc headers statfs defines f_type to be U32 which causes perf build breakage http://git.uclibc.org/uClibc/tree/libc/sysdeps/linux/common-generic/bits/statfs.h ----------->8--------------- CC fs/fs.o fs/fs.c: In function 'fs__valid_mount': fs/fs.c:82:24: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] else if (st_fs.f_type != magic) ^ cc1: all warnings being treated as errors ----------->8--------------- Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Cody P Schafer <dev@codyps.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Link: http://lkml.kernel.org/r/1420888254-17504-2-git-send-email-vgupta@synopsys.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
We need to use lib/hweight.c for that, just like we do for lib/rbtree.c, so tools need to link hweight.o. For now do it directly, but we need to have a tools/lib/lk.a or .so that collects these goodies... Reported-by:
Jan Beulich <JBeulich@suse.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a1e91dx3apzqw5kbdt7ut21s@git.kernel.org Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Namhyung Kim authored
When thread__init_map_groups() fails, a new thread should be removed from the rbtree since it's gonna be freed. Also update last match cache only if the function succeeded. Reported-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420763892-15535-1-git-send-email-namhyung@kernel.org Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Namhyung Kim authored
When build with 'make ARCH=x86' and dwarf unwind is on, there is a compiling error: CC /home/wn/perf/arch/x86/util/unwind-libdw.o CC /home/wn/perf/arch/x86/tests/regs_load.o arch/x86/tests/regs_load.S: Assembler messages: arch/x86/tests/regs_load.S:65: Error: operand type mismatch for `push' arch/x86/tests/regs_load.S:72: Error: operand type mismatch for `pop' make[1]: *** [/home/wn/perf/arch/x86/tests/regs_load.o] Error 1 make[1]: INTERNAL: Exiting with 25 jobserver tokens available; should be 24! make: *** [all] Error 2 ... Which is caused by incorrectly undefine macro HAVE_ARCH_X86_64_SUPPORT. 'config/Makefile.arch' tests __x86_64__ only when 'ARCH=x86_64'. However, when building x86_64 kernel, ARCH=x86 is valid and commonly used. Build systems, such as yocto, uses x86_64 compiler with 'ARCH=x86' to build x86_64 perf, which causes mismatching. As __LP64__ is defined for x86_64 as well, we can consolidate the __x86_64__ check to the __LP64__ check and get rid of the IS_X86_64 IMHO. (This patch is made by Namhyung Kim when replying my v1 patch: https://lkml.org/lkml/2015/1/7/17 I modified the code to remove dependency on RAW_ARCH: https://lkml.org/lkml/2015/1/7/865 Namhyung Kim didn't provide his SOB in his original email. I add mine only for my modification.) Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
Wang Nan <wangnan0@huawei.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1421029255-23039-1-git-send-email-wangnan0@huawei.com [ Namhyung provided his S-o-B on a followup to this patch thread on lkml ] Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Namhyung Kim authored
When it failed to write probe commands to the probe_event file in debugfs, it needs to propagate the error code properly. Current code blindly uses the return value of the write(2) so it always uses -1 (-EPERM) and it might confuse users. Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Acked-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420886028-15135-4-git-send-email-namhyung@kernel.org Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are three small driver fixes for reported issues for 3.19-rc5. All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-3.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mcb: mcb-pci: Only remap the 1st 0x200 bytes of BAR 0 mei: add ABI documentation for fw_status exported through sysfs mei: clean reset bit before reset
-
Linus Torvalds authored
Merge tag 'driver-core-3.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is one kernfs fix for a reported issue for 3.19-rc5. It has been in linux-next for a while" * tag 'driver-core-3.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kernfs: Fix kernfs_name_compare
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg KH: "Here are some tty and serial driver fixes for 3.19-rc5 that resolve some reported issues, and add a new device id to the 8250 serial port driver. All have been in linux-next with no reported problems" * tag 'tty-3.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: samsung: Add the support for Exynos5433 SoC Revert "tty: Fix pty master poll() after slave closes v2" tty: Prevent hw state corruption in exclusive mode reopen tty: Add support for the WCH384 4S multi-IO card serial: fix parisc boot hang
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are 6 staging driver fixes for 3.19-rc5. They fix some reported issues with some IIO drivers, as well as some issues with the vt6655 wireless driver. All have been in linux-next for a while" * tag 'staging-3.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: vt6655: fix sparse warning: argument type staging: vt6655: Fix loss of distant/weak access points on channel change. staging: vt6655: vnt_tx_packet Fix corrupted tx packets. staging: vt6655: fix sparse warnings: incorrect argument type iio: iio: Fix iio_channel_read return if channel havn't info iio: ad799x: Fix ad7991/ad7995/ad7999 config setup
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here is a bunch of USB fixes for 3.19-rc5. Most of these are gadget driver fixes, along with the xhci driver fix that we both reported having problems with, as well as some new device ids and other tiny fixes. All have been in linux-next with no problems" * tag 'usb-3.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (43 commits) usb: dwc3: gadget: Stop TRB preparation after limit is reached usb: dwc3: gadget: Fix TRB preparation during SG usb: phy: mv-usb: fix usb_phy build errors usb: serial: handle -ENODEV quietly in generic_submit_read_urb usb: serial: silence all non-critical read errors USB: console: fix potential use after free USB: console: fix uninitialised ldisc semaphore usb: gadget: udc: atmel: fix possible oops when unloading module usb: gadget: gadgetfs: fix an oops in ep_write() usb: phy: Fix deferred probing OHCI: add a quirk for ULi M5237 blocking on reset uas: Add US_FL_NO_ATA_1X for 2 more Seagate disk enclosures uas: Do not blacklist ASM1153 disk enclosures usb: gadget: udc: avoid dereference before NULL check in ep_queue usb: host: ehci-tegra: request deferred probe when failing to get phy uas: disable UAS on Apricorn SATA dongles uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS566 with usb-id 0bc2:a013 uas: Add US_FL_NO_ATA_1X for Seagate devices with usb-id 0bc2:a013 xhci: Add broken-streams quirk for Fresco Logic FL1000G xhci controllers USB: EHCI: adjust error return code ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: - Wire up compat_sys_execveat for compat (AArch32) tasks - Revert 421520ba, as this breaks our side of the boot protocol * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: partially revert "ARM: 8167/1: extend the reserved memory for initrd to be page aligned" arm64: compat: wire up compat_sys_execveat
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: - Stable fix for a NFSv3/lockd race - Fixes for several NFSv4.1 client id trunking bugs - Remove an incorrect test when checking for delegated opens" * tag 'nfs-for-3.19-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Remove incorrect check in can_open_delegated() NFS: Ignore transport protocol when detecting server trunking NFSv4/v4.1: Verify the client owner id during trunking detection NFSv4: Cache the NFSv4/v4.1 client owner_id in the struct nfs_client NFSv4.1: Fix client id trunking on Linux LOCKD: Fix a race when initialising nlmsvc_timeout
-
Linus Torvalds authored
Merge tag 'trace-fixes-v3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace fixes from Steven Rostedt: "This holds a few fixes to the ftrace infrastructure as well as the mixture of function graph tracing and kprobes. When jprobes and function graph tracing is enabled at the same time it will crash the system: # modprobe jprobe_example # echo function_graph > /sys/kernel/debug/tracing/current_tracer After the first fork (jprobe_example probes it), the system will crash. This is due to the way jprobes copies the stack frame and does not do a normal function return. This messes up with the function graph tracing accounting which hijacks the return address from the stack and replaces it with a hook function. It saves the return addresses in a separate stack to put back the correct return address when done. But because the jprobe functions do not do a normal return, their stack addresses are not put back until the function they probe is called, which means that the probed function will get the return address of the jprobe handler instead of its own. The simple fix here was to disable function graph tracing while the jprobe handler is being called. While debugging this I found two minor bugs with the function graph tracing. The first was about the function graph tracer sharing its function hash with the function tracer (they both get filtered by the same input). The changing of the set_ftrace_filter would not sync the function recording records after a change if the function tracer was disabled but the function graph tracer was enabled. This was due to the update only checking one of the ops instead of the shared ops to see if they were enabled and should perform the sync. This caused the ftrace accounting to break and a ftrace_bug() would be triggered, disabling ftrace until a reboot. The second was that the check to update records only checked one of the filter hashes. It needs to test both the "filter" and "notrace" hashes. The "filter" hash determines what functions to trace where as the "notrace" hash determines what functions not to trace (trace all but these). Both hashes need to be passed to the update code to find out what change is being done during the update. This also broke the ftrace record accounting and triggered a ftrace_bug(). This patch set also include two more fixes that were reported separately from the kprobe issue. One was that init_ftrace_syscalls() was called twice at boot up. This is not a major bug, but that call performed a rather large kmalloc (NR_syscalls * sizeof(*syscalls_metadata)). The second call made the first one a memory leak, and wastes memory. The other fix is a regression caused by an update in the v3.19 merge window. The moving to enable events early, moved the enabling before PID 1 was created. The syscall events require setting the TIF_SYSCALL_TRACEPOINT for all tasks. But for_each_process_thread() does not include the swapper task (PID 0), and ended up being a nop. A suggested fix was to add the init_task() to have its flag set, but I didn't really want to mess with PID 0 for this minor bug. Instead I disable and re-enable events again at early_initcall() where it use to be enabled. This also handles any other event that might have its own reg function that could break at early boot up" * tag 'trace-fixes-v3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix enabling of syscall events on the command line tracing: Remove extra call to init_ftrace_syscalls() ftrace/jprobes/x86: Fix conflict between jprobes and function graph tracing ftrace: Check both notrace and filter for old hash ftrace: Fix updating of filters for shared global_ops filters
-