Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into thermal-soc

orderly_poweroff is triggered when a graceful shutdown
of system is desired. This may be used in many critical states of the
kernel such as when subsystems detects conditions such as critical
temperature conditions. However, in certain conditions in system
boot up sequences like those in the middle of driver probes being
initiated, userspace will be unable to power off the system in a clean
manner and leaves the system in a critical state. In cases like these,
the /sbin/poweroff will return success (having forked off to attempt
powering off the system. However, the system overall will fail to
completely poweroff (since other modules will be probed) and the system
is still functional with no userspace (since that would have shut itself
off).

However, there is no clean way of detecting such failure of userspace
powering off the system. In such scenarios, it is necessary for a backup
workqueue to be able to force a shutdown of the system when orderly
shutdown is not successful after a configurable time period.

Reported-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

thermal_zone_device_check --> thermal_zone_device_update -->
handle_thermal_trip --> handle_critical_trips --> orderly_poweroff

The above sequence happens every 250/500 mS based on the configuration.
The orderly_poweroff function is getting called every 250/500 mS.
With a full fledged file system it takes at least 5-10 Seconds to
power off gracefully.

In that period due to the thermal_zone_device_check triggering
periodically the thermal work queues bombard with
orderly_poweroff calls multiple times eventually leading to
failures in gracefully powering off the system.

Make sure that orderly_poweroff is called only once.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

The interrupt request call in Intel SoC DTS driver may fail if
there is no underlying BIOS support. However, the user space
thermal daemon can still use the thermal zones created by the
SoC DTS driver in polling mode, therefore, instead of bailing
out on interrupt request failures, it is better just to log
a warning message and continue the init process.

Signed-off-by: Brian Bian <brian.bian@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

This patch adds another parameter to the trace function:
trace_thermal_power_devfreq_get_power().

In case when we call directly driver's code for the real power,
we do not have static/dynamic_power values. Instead we get total
power in the '*power' value. The 'static_power' and
'dynamic_power' are set to 0.

Therefore, we have to trace that '*power' value in this scenario.

CC: Steven Rostedt <rostedt@goodmis.org>
CC: Ingo Molnar <mingo@redhat.com>
CC: Zhang Rui <rui.zhang@intel.com>
CC: Eduardo Valentin <edubezval@gmail.com>
Acked-by: Javi Merino <javi.merino@kernel.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>

This patch introduces a new interface for device drivers connected to
devfreq_cooling in the thermal framework: get_real_power().

Some devices have more sophisticated methods (like power counters)
to approximate the actual power that they use.
In the previous implementation we had a pre-calculated power
table which was then scaled by 'utilization'
('busy_time' and 'total_time' taken from devfreq 'last_status').

With this new interface the driver can provide more precise data
regarding actual power to the thermal governor every time the power
budget is calculated. We then use this value and calculate the real
resource utilization scaling factor.

Reviewed-by: Chris Diamand <chris.diamand@arm.com>
Acked-by: Javi Merino <javi.merino@kernel.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>

Move the code which gets the voltage for a given frequency.
This code will be resused in few places.

Acked-by: Javi Merino <javi.merino@kernel.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>

If thermal bank with 4 sensors, thermal driver should read TEMP_MSR3.

However, currently thermal driver would not read TEMP_MSR3 since mt8173
thermal driver only use 3 sensors on each thermal bank at the same time,
so this patch would not effect temperature.
Only if mt mt8173 thermal driver use 4 sensors on any thermal bank, would
read third sensor two times, and lose fourth sensor of vale.

cc: stable@vger.kernel.org
Fixes: b7cf0053

 ("thermal: Add Mediatek thermal driver for mt2701.")
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

We already have 2 Broadcom drivers and at least 1 more is coming. This
made us create broadcom subdirectory where bcm2835 should be moves now.

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Just in case someone uses modinfo to find (blame) me.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Pull CIFS fixes from Steve French:
 "This is a set of CIFS/SMB3 fixes for stable.

  There is another set of four SMB3 reconnect fixes for stable in
  progress but they are still being reviewed/tested, so didn't want to
  wait any longer to send these five below"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  Reset TreeId to zero on SMB2 TREE_CONNECT
  CIFS: Fix build failure with smb2
  Introduce cifs_copy_file_range()
  SMB3: Rename clone_range to copychunk_range
  Handle mismatched open calls

Pull ARM fixes from Russell King:
 "A number of ARM fixes:

   - prevent oopses caused by dma_get_sgtable() and declared DMA
     coherent memory

   - fix boot failure on nommu caused by ID_PFR1 access

   - a number of kprobes fixes from Jon Medhurst and Masami Hiramatsu"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8665/1: nommu: access ID_PFR1 only if CPUID scheme
  ARM: dma-mapping: disallow dma_get_sgtable() for non-kernel managed memory
  arm: kprobes: Align stack to 8-bytes in test code
  arm: kprobes: Fix the return address of multiple kretprobes
  arm: kprobes: Skip single-stepping in recursing path if possible
  arm: kprobes: Allow to handle reentered kprobe on single-stepping

Merge tag 'driver-core-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are 3 small fixes for 4.11-rc6.

  One resolves a reported issue with sysfs files that NeilBrown found,
  one is a documenatation fix for the stable kernel rules, and the last
  is a small MAINTAINERS file update for kernfs"

* tag 'driver-core-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  MAINTAINERS: separate out kernfs maintainership
  sysfs: be careful of error returns from ops->show()
  Documentation: stable-kernel-rules: fix stable-tag format

Pull staging/IIO driver rfixes from Greg KH:
 "Here are a number of small IIO and staging driver fixes for 4.11-rc6.
  Nothing big here, just iio fixes for reported issues, and an ashmem
  fix for a very old bug that has been reported by a number of Android
  vendors"

* tag 'staging-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: android: ashmem: lseek failed due to no FMODE_LSEEK.
  iio: hid-sensor-attributes: Fix sensor property setting failure.
  iio: accel: hid-sensor-accel-3d: Fix duplicate scan index error
  iio: core: Fix IIO_VAL_FRACTIONAL_LOG2 for negative values
  iio: st_pressure: initialize lps22hb bootime
  iio: bmg160: reset chip when probing
  iio: cros_ec_sensors: Fix return value to get raw and calibbias data.

Pull VFS fixes from Al Viro:
 "statx followup fixes and a fix for stack-smashing on alpha"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  alpha: fix stack smashing in old_adjtimex(2)
  statx: Include a mask for stx_attributes in struct statx
  statx: Reserve the top bit of the mask for future struct expansion
  xfs: report crtime and attribute flags to statx
  ext4: Add statx support
  statx: optimize copy of struct statx to userspace
  statx: remove incorrect part of vfs_statx() comment
  statx: reject unknown flags when using NULL path
  Documentation/filesystems: fix documentation for ->getattr()

Pull block fixes from Jens Axboe:
 "Here's a pull request for 4.11-rc, fixing a set of issues mostly
  centered around the new scheduling framework. These have been brewing
  for a while, but split up into what we absolutely need in 4.11, and
  what we can defer until 4.12. These are well tested, on both single
  queue and multiqueue setups, and with and without shared tags. They
  fix several hangs that have happened in testing.

  This is obviously larger than I would have preferred at this point in
  time, but I don't think we can shave much off this and still get the
  desired results.

  In detail, this pull request contains:

   - a set of five fixes for NVMe, mostly from Christoph and one from
     Roland.

   - a series from Bart, fixing issues with dm-mq and SCSI shared tags
     and scheduling. Note that one of those patches commit messages may
     read like an optimization, but it is in fact an important fix for
     queue restarts in particular.

   - a series from Omar, most importantly fixing a hang with multiple
     hardware queues when we fail to get a driver tag. Another important
     fix in there is for resizing hardware queues, which nbd does when
     handling multiple sockets for one connection.

   - fixing an imbalance in putting the ctx for hctx request allocations
     from Minchan"

* 'for-linus' of git://git.kernel.dk/linux-block:
  blk-mq: Restart a single queue if tag sets are shared
  dm rq: Avoid that request processing stalls sporadically
  scsi: Avoid that SCSI queues get stuck
  blk-mq: Introduce blk_mq_delay_run_hw_queue()
  blk-mq: remap queues when adding/removing hardware queues
  blk-mq-sched: fix crash in switch error path
  blk-mq-sched: set up scheduler tags when bringing up new queues
  blk-mq-sched: refactor scheduler initialization
  blk-mq: use the right hctx when getting a driver tag fails
  nvmet: fix byte swap in nvmet_parse_io_cmd
  nvmet: fix byte swap in nvmet_execute_write_zeroes
  nvmet: add missing byte swap in nvmet_get_smart_log
  nvme: add missing byte swap in nvme_setup_discard
  nvme: Correct NVMF enum values to match NVMe-oF rev 1.0
  block: do not put mq context in blk_mq_alloc_request_hctx

Pull pin control fix from Linus Walleij:
 "This late fix for pin control is hopefully the last I send this cycle.

  The problem was detected early in the v4.11 release cycle and there
  has been some back and forth on how to solve it. Sadly the proper fix
  arrives late, but at least not too late.

  An issue was detected with pin control on the Freescale i.MX after the
  refactorings for more general group and function handling.

  We now have the proper fix for this"

* tag 'pinctrl-v4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: core: Fix pinctrl_register_and_init() with pinctrl_enable()

Pull powerpc fixes from Michael Ellerman:
 "Some more powerpc fixes for 4.11:

  Headed to stable:

   - disable HFSCR[TM] if TM is not supported, fixes a potential host
     kernel crash triggered by a hostile guest, but only in
     configurations that no one uses

   - don't try to fix up misaligned load-with-reservation instructions

   - fix flush_(d|i)cache_range() called from modules on little endian
     kernels

   - add missing global TLB invalidate if cxl is active

   - fix missing preempt_disable() in crc32c-vpmsum

  And a fix for selftests build changes that went in this release:

   - selftests/powerpc: Fix standalone powerpc build

  Thanks to: Benjamin Herrenschmidt, Frederic Barrat, Oliver O'Halloran,
  Paul Mackerras"

* tag 'powerpc-4.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/crypto/crc32c-vpmsum: Fix missing preempt_disable()
  powerpc/mm: Add missing global TLB invalidate if cxl is active
  powerpc/64: Fix flush_(d|i)cache_range() called from modules
  powerpc: Don't try to fix up misaligned load-with-reservation instructions
  powerpc: Disable HFSCR[TM] if TM is not supported
  selftests/powerpc: Fix standalone powerpc build

In the case that compat_get_bitmap fails we do not want to copy the
bitmap to the user as it will contain uninitialized stack data and leak
sensitive data.

Signed-off-by: Chris Salls <salls@cs.ucsb.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently, inputting the following command will succeed but actually the
value will be truncated:

  # echo 0x12ffffffff > /proc/sys/net/ipv4/tcp_notsent_lowat

This is not friendly to the user, so instead, we should report error
when the value is larger than UINT_MAX.

Fixes: e7d316a0

 ("sysctl: handle error writing UINT_MAX to u32 fields")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Separate out kernfs from driver core and add myself as a
co-maintainer.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ops->show() can return a negative error code.
Commit 65da3484 ("sysfs: correctly handle short reads on PREALLOC attrs.")
(in v4.4) caused this to be stored in an unsigned 'size_t' variable, so errors
would look like large numbers.
As a result, if an error is returned, sysfs_kf_read() will return the
value of 'count', typically 4096.

Commit 17d0774f ("sysfs: correctly handle read offset on PREALLOC attrs")
(in v4.8) extended this error to use the unsigned large 'len' as a size for
memmove().
Consequently, if ->show returns an error, then the first read() on the
sysfs file will return 4096 and could return uninitialized memory to
user-space.
If the application performs a subsequent read, this will trigger a memmove()
with extremely large count, and is likely to crash the machine is bizarre ways.

This bug can currently only be triggered by reading from an md
sysfs attribute declared with __ATTR_PREALLOC() during the
brief period between when mddev_put() deletes an mddev from
the ->all_mddevs list, and when mddev_delayed_delete() - which is
scheduled on a workqueue - completes.
Before this, an error won't be returned by the ->show()
After this, the ->show() won't be called.

I can reproduce it reliably only by putting delay like
	usleep_range(500000,700000);
early in mddev_delayed_delete(). Then after creating an
md device md0 run
  echo clear > /sys/block/md0/md/array_state; cat /sys/block/md0/md/array_state

The bug can be triggered without the usleep.

Fixes: 65da3484 ("sysfs: correctly handle short reads on PREALLOC attrs.")
Fixes: 17d0774f

 ("sysfs: correctly handle read offset on PREALLOC attrs")
Cc: stable@vger.kernel.org
Signed-off-by: NeilBrown <neilb@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A patch documenting how to specify which kernels a particular fix should
be backported to (seemingly) inadvertently added a minus sign after the
kernel version. This particular stable-tag format had never been used
prior to this patch, and was neither present when the patch in question
was first submitted (it was added in v2 without any comment).

Drop the minus sign to avoid any confusion.

Fixes: fdc81b79

 ("stable_kernel_rules: Add clause about specification of kernel versions to patch.")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vfs_llseek will check whether the file mode has
FMODE_LSEEK, no return failure. But ashmem can be
lseek, so add FMODE_LSEEK to ashmem file.

Comment From Greg Hackmann:
	ashmem_llseek() passes the llseek() call through to the backing
	shmem file.  91360b02 ("ashmem: use vfs_llseek()") changed
	this from directly calling the file's llseek() op into a VFS
	layer call.  This also adds a check for the FMODE_LSEEK bit, so
	without that bit ashmem_llseek() now always fails with -ESPIPE.

Fixes: 91360b02

 ("ashmem: use vfs_llseek()")
Signed-off-by: Shuxiao Zhang <zhangshuxiao@xiaomi.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Cc: stable <stable@vger.kernel.org> # 3.18+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull sparc fixes from David Miller:
 "Several fixes here, mostly having to due with either build errors or
  memory corruptions depending upon whether you have THP enabled or not"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: remove unused wp_works_ok macro
  sparc32: Export vac_cache_size to fix build error
  sparc64: Fix memory corruption when THP is enabled
  sparc64: Fix kernel panic due to erroneous #ifdef surrounding pmd_write()
  arch/sparc: Avoid DCTI Couples
  sparc64: kern_addr_valid regression
  sparc64: Add support for 2G hugepages
  sparc64: Fix size check in huge_pte_alloc

Pull KVM fixes from Radim Krčmář:
 "ARM:
   - Fix a problem with GICv3 userspace save/restore
   - Clarify GICv2 userspace save/restore ABI
   - Be more careful in clearing GIC LRs
   - Add missing synchronization primitive to our MMU handling code

  PPC:
   - Check for a NULL return from kzalloc

  s390:
   - Prevent translation exception errors on valid page tables for the
     instruction-exection-protection support

  x86:
   - Fix Page-Modification Logging when running a nested guest"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PPC: Book3S HV: Check for kmalloc errors in ioctl
  KVM: nVMX: initialize PML fields in vmcs02
  KVM: nVMX: do not leak PML full vmexit to L1
  KVM: arm/arm64: vgic: Fix GICC_PMR uaccess on GICv3 and clarify ABI
  KVM: arm64: Ensure LRs are clear when they should be
  kvm: arm/arm64: Fix locking for kvm_free_stage2_pgd
  KVM: s390: remove change-recording override support
  arm/arm64: KVM: Take mmap_sem in kvm_arch_prepare_memory_region
  arm/arm64: KVM: Take mmap_sem in stage2_unmap_vm

Pull audit cleanup from Paul Moore:
 "A week later than I had hoped, but as promised, here is the audit
  uninline-fix we talked about during the last audit pull request.

  The patch is slightly different than what we originally discussed as
  it made more sense to keep the audit_signal_info() function in
  auditsc.c rather than move it and bunch of other related
  variables/definitions into audit.c/audit.h.

  At some point in the future I need to look at how the audit code is
  organized across kernel/audit*, I suspect we could do things a bit
  better, but it doesn't seem like a -rc release is a good place for
  that ;)

  Regardless, this patch passes our tests without problem and looks good
  for v4.11"

* 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit:
  audit: move audit_signal_info() into kernel/auditsc.c

Merge misc fixes from Andrew Morton:
 "10 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: move pcp and lru-pcp draining into single wq
  mailmap: update Yakir Yang email address
  mm, swap_cgroup: reschedule when neeed in swap_cgroup_swapoff()
  dax: fix radix tree insertion race
  mm, thp: fix setting of defer+madvise thp defrag mode
  ptrace: fix PTRACE_LISTEN race corrupting task->state
  vmlinux.lds: add missing VMLINUX_SYMBOL macros
  mm/page_alloc.c: fix print order in show_free_areas()
  userfaultfd: report actual registered features in fdinfo
  mm: fix page_vma_mapped_walk() for ksm pages

We currently have 2 specific WQ_RECLAIM workqueues in the mm code.
vmstat_wq for updating pcp stats and lru_add_drain_wq dedicated to drain
per cpu lru caches.  This seems more than necessary because both can run
on a single WQ.  Both do not block on locks requiring a memory
allocation nor perform any allocations themselves.  We will save one
rescuer thread this way.

On the other hand drain_all_pages() queues work on the system wq which
doesn't have rescuer and so this depend on memory allocation (when all
workers are stuck allocating and new ones cannot be created).

Initially we thought this would be more of a theoretical problem but
Hugh Dickins has reported:

: 4.11-rc has been giving me hangs after hours of swapping load.  At
: first they looked like memory leaks ("fork: Cannot allocate memory");
: but for no good reason I happened to do "cat /proc/sys/vm/stat_refresh"
: before looking at /proc/meminfo one time, and the stat_refresh stuck
: in D state, waiting for completion of flush_work like many kworkers.
: kthreadd waiting for completion of flush_work in drain_all_pages().

This worker should be using WQ_RECLAIM as well in order to guarantee a
forward progress.  We can reuse the same one as for lru draining and
vmstat.

Link: http://lkml.kernel.org/r/20170307131751.24936-1-mhocko@kernel.org


Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Tested-by: Yang Li <pku.leo@gmail.com>
Tested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Set current email address to replace previous employers email addresses.

Link: http://lkml.kernel.org/r/1491450722-6633-1-git-send-email-jeffy.chen@rock-chips.com


Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We got need_resched() warnings in swap_cgroup_swapoff() because
swap_cgroup_ctrl[type].length is particularly large.

Reschedule when needed.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1704061315270.80559@chino.kir.corp.google.com


Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

While running generic/340 in my test setup I hit the following race.  It
can happen with kernels that support FS DAX PMDs, so v4.10 thru
v4.11-rc5.

Thread 1				Thread 2
--------				--------
dax_iomap_pmd_fault()
  grab_mapping_entry()
    spin_lock_irq()
    get_unlocked_mapping_entry()
    'entry' is NULL, can't call lock_slot()
    spin_unlock_irq()
    radix_tree_preload()
					dax_iomap_pmd_fault()
					  grab_mapping_entry()
					    spin_lock_irq()
					    get_unlocked_mapping_entry()
					    ...
					    lock_slot()
					    spin_unlock_irq()
					  dax_pmd_insert_mapping()
					    <inserts a PMD mapping>
    spin_lock_irq()
    __radix_tree_insert() fails with -EEXIST
    <fall back to 4k fault, and die horribly
     when inserting a 4k entry where a PMD exists>

The issue is that we have to drop mapping->tree_lock while calling
radix_tree_preload(), but since we didn't have a radix tree entry to
lock (unlike in the pmd_downgrade case) we have no protection against
Thread 2 coming along and inserting a PMD at the same index.  For 4k
entries we handled this with a special-case response to -EEXIST coming
from the __radix_tree_insert(), but this doesn't save us for PMDs
because the -EEXIST case can also mean that we collided with a 4k entry
in the radix tree at a different index, but one that is covered by our
PMD range.

So, correctly handle both the 4k and 2M collision cases by explicitly
re-checking the radix tree for an entry at our index once we reacquire
mapping->tree_lock.

This patch has made it through a clean xfstests run with the current
v4.11-rc5 based linux/master, and it also ran generic/340 500 times in a
loop.  It used to fail within the first 10 iterations.

Link: http://lkml.kernel.org/r/20170406212944.2866-1-ross.zwisler@linux.intel.com


Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: <stable@vger.kernel.org>    [4.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Setting thp defrag mode of "defer+madvise" actually sets "defer" in the
kernel due to the name similarity and the out-of-order way the string is
checked in defrag_store().

Check the string in the correct order so that
TRANSPARENT_HUGEPAGE_DEFRAG_KSWAPD_OR_MADV_FLAG is set appropriately for
"defer+madvise".

Fixes: 21440d7e ("mm, thp: add new defer+madvise defrag option")
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1704051814420.137626@chino.kir.corp.google.com


Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In PT_SEIZED + LISTEN mode STOP/CONT signals cause a wakeup against
__TASK_TRACED.  If this races with the ptrace_unfreeze_traced at the end
of a PTRACE_LISTEN, this can wake the task /after/ the check against
__TASK_TRACED, but before the reset of state to TASK_TRACED.  This
causes it to instead clobber TASK_WAKING, allowing a subsequent wakeup
against TRACED while the task is still on the rq wake_list, corrupting
it.

Oleg said:
 "The kernel can crash or this can lead to other hard-to-debug problems.
  In short, "task->state = TASK_TRACED" in ptrace_unfreeze_traced()
  assumes that nobody else can wake it up, but PTRACE_LISTEN breaks the
  contract. Obviusly it is very wrong to manipulate task->state if this
  task is already running, or WAKING, or it sleeps again"

[akpm@linux-foundation.org: coding-style fixes]
Fixes: 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL")
Link: http://lkml.kernel.org/r/xm26y3vfhmkp.fsf_-_@bsegall-linux.mtv.corp.google.com


Signed-off-by: Ben Segall <bsegall@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When __{start,end}_ro_after_init is referenced from C code, we run into
the following build errors on blackfin:

  kernel/extable.c:169: undefined reference to `__start_ro_after_init'
  kernel/extable.c:169: undefined reference to `__end_ro_after_init'

The build error is due to the fact that blackfin is one of the few
arches that prepends an underscore '_' to all symbols defined in C.

Fix this by wrapping __{start,end}_ro_after_init in vmlinux.lds.h with
VMLINUX_SYMBOL(), which adds the necessary prefix for arches that have
HAVE_UNDERSCORE_SYMBOL_PREFIX.

Link: http://lkml.kernel.org/r/1491259387-15869-1-git-send-email-jeyu@redhat.com


Signed-off-by: Jessica Yu <jeyu@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Eddie Kovsky <ewk@edkovsky.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fixes: 11fb9989 ("mm: move most file-based accounting to the node")
Link: http://lkml.kernel.org/r/1490377730.30219.2.camel@beget.ru


Signed-off-by: Alexander Polyakov <apolyakov@beget.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>	[4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>