Pull char/misc driver fixes from Greg KH:
 "Here are a few small driver fixes for 5.17-rc6 for reported issues.

  The majority of these are IIO fixes for small things, and the other
  two are a mvmem and mtd core conflict fix.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  mtd: core: Fix a conflict between MTD and NVMEM on wp-gpios property
  nvmem: core: Fix a conflict between MTD and NVMEM on wp-gpios property
  iio: imu: st_lsm6dsx: wait for settling time in st_lsm6dsx_read_oneshot
  iio: Fix error handling for PM
  iio: addac: ad74413r: correct comparator gpio getters mask usage
  iio: addac: ad74413r: use ngpio size when iterating over mask
  iio: addac: ad74413r: Do not reference negative array offsets
  iio: adc: men_z188_adc: Fix a resource leak in an error handling path
  iio: frequency: admv1013: remove the always true condition
  iio: accel: fxls8962af: add padding to regmap for SPI
  iio:imu:adis16480: fix buffering for devices with no burst mode
  iio: adc: ad7124: fix mask used for setting AIN_BUFP & AIN_BUFM bits
  iio: adc: tsc2046: fix memory corruption by preventing array overflow

Merge tag 'driver-core-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fix from Greg KH:
 "Here is a single driver core fix for 5.17-rc6. It resolves a reported
  problem when the DMA map of a device is not properly released.

  It has been in linux-next with no reported problems"

* tag 'driver-core-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: Free DMA range map when device is released

Pull staging driver fix from Greg KH:
 "Here is a single staging driver fix for 5.17-rc6.

  It resolves a reported problem in the fbtft fb_st7789v.c driver that
  could cause the display to be flipped in cold weather.

  It has been in linux-next with no reported problems"

* tag 'staging-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: fbtft: fb_st7789v: reset display before initialization

Pull tty/serial driver fixes from Greg KH:
 "Here are some small n_gsm and sc16is7xx serial driver fixes for
  5.17-rc6.

  The n_gsm fixes are from Siemens as it seems they are using the line
  discipline and fixing up a number of issues they found in their
  testing. The sc16is7xx serial driver fix is for a reported problem
  with that chip.

  All of these have been in linux-next with no reported problems"

* tag 'tty-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  sc16is7xx: Fix for incorrect data being transmitted
  tty: n_gsm: fix deadlock in gsmtty_open()
  tty: n_gsm: fix wrong modem processing in convergence layer type 2
  tty: n_gsm: fix wrong tty control line for flow control
  tty: n_gsm: fix NULL pointer access due to DLCI release
  tty: n_gsm: fix proper link termination after failed open
  tty: n_gsm: fix encoding of command/response bit
  tty: n_gsm: fix encoding of control signal octet bit DV

Pull USB fixes from Greg KH:
 "Here are a number of small USB driver fixes for 5.17-rc6 to resolve
  reported problems and add new device ids. They include:

   - dwc3:
      - device mapping fix
      - new device ids
      - driver fixes

   - xhci driver fixes

   - gadget driver fixes

   - usb-serial driver device id updates

  All of these have been in linux-next with no reported problems"

* tag 'usb-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: rndis: add spinlock for rndis response list
  usb: dwc3: gadget: Let the interrupt handler disable bottom halves.
  USB: gadget: validate endpoint index for xilinx udc
  USB: serial: option: add Telit LE910R1 compositions
  USB: serial: option: add support for DW5829e
  Revert "USB: serial: ch341: add new Product ID for CH341A"
  usb: dwc2: drd: fix soft connect when gadget is unconfigured
  usb: dwc3: pci: Fix Bay Trail phy GPIO mappings
  tps6598x: clear int mask on probe failure
  xhci: Prevent futile URB re-submissions due to incorrect return value.
  xhci: re-initialize the HC during resume if HCE was set
  usb: dwc3: pci: Add "snps,dis_u2_susphy_quirk" for Intel Bay Trail
  usb: dwc3: pci: add support for the Intel Raptor Lake-S

Pull ata fixes from Damien Le Moal:
 "Two fixes for the pata_hpt37x driver, both from Sergey:

   - Fix a PCI register access using an incorrect size (8bits instead of
     16bits)

   - Make sure to always disable the primary channel as it is unused"

* tag 'ata-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: pata_hpt37x: disable primary channel on HPT371
  ata: pata_hpt37x: fix PCI clock detection

Pull clk fixes from Stephen Boyd:
 "A couple driver fixes in the clk subsystem

   - Fix a hang due to bad clk parent in the Ingenic jz4725b driver

   - Fix SD controllers on Qualcomm MSM8994 SoCs by removing clks that
     shouldn't be touched"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: jz4725b: fix mmc0 clock gating
  clk: qcom: gcc-msm8994: Remove NoC clocks

Pull drm fixes from Dave Airlie:
 "Regular drm fixes pull, i915, amdgpu and tegra mostly, all pretty
  small.

  core:
   - edid: Always set RGB444

  tegra:
   - tegra186 suspend/resume fixes
   - syncpoint wait fix
   - build warning fix
   - eDP on older devices fix

  amdgpu:
   - Display FP fix
   - PCO powergating fix
   - RDNA2 OEM SKU stability fixes
   - Display PSR fix
   - PCI ASPM fix
   - Display link encoder fix for TEST_COMMIT
   - Raven2 suspend/resume fix
   - Fix a regression in virtual display support
   - GPUVM eviction fix

  i915:
   - Fix QGV handling on ADL-P+
   - Fix bw atomic check when switching between SAGV vs. no SAGV
   - Disconnect PHYs left connected by BIOS on disabled ports
   - Fix SAVG to no SAGV transitions on TGL+
   - Print PHY name properly on calibration error (DG2)

  imx:
   - dcss: Select GEM CMA helpers

  radeon:
   - Fix some variables's type

  vc4:
   - Fix codec cleanup
   - Fix PM reference counting"

* tag 'drm-fixes-2022-02-25' of git://anongit.freedesktop.org/drm/drm: (24 commits)
  drm/amdgpu: check vm ready by amdgpu_vm->evicting flag
  drm/amdgpu: bypass tiling flag check in virtual display case (v2)
  Revert "drm/amdgpu: add modifiers in amdgpu_vkms_plane_init()"
  drm/amdgpu: do not enable asic reset for raven2
  drm/amd/display: Fix stream->link_enc unassigned during stream removal
  drm/amd: Check if ASPM is enabled from PCIe subsystem
  drm/edid: Always set RGB444
  drm/tegra: dpaux: Populate AUX bus
  drm/radeon: fix variable type
  drm/amd/display: For vblank_disable_immediate, check PSR is really used
  drm/amd/pm: fix some OEM SKU specific stability issues
  drm/amdgpu: disable MMHUB PG for Picasso
  drm/amd/display: Protect update_bw_bounding_box FPU code.
  drm/i915/dg2: Print PHY name properly on calibration error
  drm/i915: Fix bw atomic check when switching between SAGV vs. no SAGV
  drm/i915: Correctly populate use_sagv_wm for all pipes
  drm/i915: Disconnect PHYs left connected by BIOS on disabled ports
  drm/i915: Widen the QGV point mask
  drm/imx/dcss: i.MX8MQ DCSS select DRM_GEM_CMA_HELPER
  drm/vc4: crtc: Fix runtime_pm reference counting
  ...

Merge tag 'perf-tools-fixes-for-v5.17-2022-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix double free in in the error path when opening perf.data from
   multiple files in a directory instead of from a single file

 - Sync the msr-index.h copy with the kernel sources

 - Fix error when printing 'weight' field in 'perf script'

 - Skip failing sigtrap test for arm+aarch64 in 'perf test'

 - Fix failure to use a cpu list for uncore events in hybrid systems,
   e.g. Intel Alder Lake

* tag 'perf-tools-fixes-for-v5.17-2022-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf script: Fix error when printing 'weight' field
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  perf data: Fix double free in perf_session__delete()
  perf evlist: Fix failed to use cpu list for uncore events
  perf test: Skip failing sigtrap test for arm+aarch64

Pull kvm fixes from Paolo Bonzini:
 "x86 host:

   - Expose KVM_CAP_ENABLE_CAP since it is supported

   - Disable KVM_HC_CLOCK_PAIRING in TSC catchup mode

   - Ensure async page fault token is nonzero

   - Fix lockdep false negative

   - Fix FPU migration regression from the AMX changes

  x86 guest:

   - Don't use PV TLB/IPI/yield on uniprocessor guests

  PPC:

   - reserve capability id (topic branch for ppc/kvm)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: nSVM: disallow userspace setting of MSR_AMD64_TSC_RATIO to non default value when tsc scaling disabled
  KVM: x86/mmu: make apf token non-zero to fix bug
  KVM: PPC: reserve capability 210 for KVM_CAP_PPC_AIL_MODE_3
  x86/kvm: Don't use pv tlb/ipi/sched_yield if on 1 vCPU
  x86/kvm: Fix compilation warning in non-x86_64 builds
  x86/kvm/fpu: Remove kvm_vcpu_arch.guest_supported_xcr0
  x86/kvm/fpu: Limit guest user_xfeatures to supported bits of XCR0
  kvm: x86: Disable KVM_HC_CLOCK_PAIRING if tsc is in always catchup mode
  KVM: Fix lockdep false negative during host resume
  KVM: x86: Add KVM_CAP_ENABLE_CAP to x86

Pull pci fixes from Bjorn Helgaas:

 - Fix a merge error that broke PCI device enumeration on mvebu
   platforms, including Turris Omnia (Armada 385) (Pali Rohár)

 - Avoid using ATS on all AMD Navi10 and Navi14 GPUs because some
   VBIOSes don't account for "harvested" (disabled) parts of the chip
   when initializing caches (Alex Deucher)

* tag 'pci-v5.17-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Mark all AMD Navi10 and Navi14 GPU ATS as broken
  PCI: mvebu: Fix device enumeration regression

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf and netfilter.

  Current release - regressions:

   - bpf: fix crash due to out of bounds access into reg2btf_ids

   - mvpp2: always set port pcs ops, avoid null-deref

   - eth: marvell: fix driver load from initrd

   - eth: intel: revert "Fix reset bw limit when DCB enabled with 1 TC"

  Current release - new code bugs:

   - mptcp: fix race in overlapping signal events

  Previous releases - regressions:

   - xen-netback: revert hotplug-status changes causing devices to not
     be configured

   - dsa:
      - avoid call to __dev_set_promiscuity() while rtnl_mutex isn't
        held
      - fix panic when removing unoffloaded port from bridge

   - dsa: microchip: fix bridging with more than two member ports

  Previous releases - always broken:

   - bpf:
      - fix crash due to incorrect copy_map_value when both spin lock
        and timer ar...

Merge tag 'drm-intel-fixes-2022-02-24' of git://anongit.freedesktop.org/drm/drm-intel

 into drm-fixes

- Fix QGV handling on ADL-P+ (Ville Syrjälä)
- Fix bw atomic check when switching between SAGV vs. no SAGV (Ville Syrjälä)
- Disconnect PHYs left connected by BIOS on disabled ports (Imre Deak)
- Fix SAVG to no SAGV transitions on TGL+ (Ville Syrjälä)
- Print PHY name properly on calibration error (DG2) (Matt Roper)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YhdyHwRWkOTWwlqi@tursulin-mobl2

Pull block fixes from Jens Axboe:

 - NVMe pull request:
    - send H2CData PDUs based on MAXH2CDATA (Varun Prakash)
    - fix passthrough to namespaces with unsupported features (Christoph
      Hellwig)

 - Clear iocb->private at poll completion (Stefano)

* tag 'block-5.17-2022-02-24' of git://git.kernel.dk/linux-block:
  nvme-tcp: send H2CData PDUs based on MAXH2CDATA
  nvme: also mark passthrough-only namespaces ready in nvme_update_ns_info
  nvme: don't return an error from nvme_configure_metadata
  block: clear iocb->private in blkdev_bio_end_io_async()

Pull io_uring fixes from Jens Axboe:

 - Add a conditional schedule point in io_add_buffers() (Eric)

 - Fix for a quiesce speedup merged in this release (Dylan)

 - Don't convert to jiffies for event timeout waiting, it's way too
   coarse when we accept a timespec as input (me)

* tag 'io_uring-5.17-2022-02-23' of git://git.kernel.dk/linux-block:
  io_uring: disallow modification of rsrc_data during quiesce
  io_uring: don't convert to jiffies for waiting on timeouts
  io_uring: add a schedule point in io_add_buffers()

Merge tag 'platform-drivers-x86-v5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull more x86 platform driver fixes from Hans de Goede:
 "Two more fixes:

   - Fix suspend/resume regression on AMD Cezanne APUs in >= 5.16

   - Fix Microsoft Surface 3 battery readings"

* tag 'platform-drivers-x86-v5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  surface: surface3_power: Fix battery readings on batteries without a serial number
  platform/x86: amd-pmc: Set QOS during suspend on CZN w/ timer wakeup

Obtaining a MAC address may be deferred in cases when the MAC is stored
in an NVMEM block, for example, and it may not be ready upon the first
retrieval attempt and return EPROBE_DEFER.

It is also possible that a port that does not rely on NVMEM has been
already created when getting the defer request. Thus, also the resources
allocated previously must be freed when doing a roll-back.

Fixes: 76723bca

 ("net: mv643xx_eth: add DT parsing support")
Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220223142337.41757-1-maukka@ext.kapsi.fi


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

KVM: x86: nSVM: disallow userspace setting of MSR_AMD64_TSC_RATIO to non default value when tsc scaling disabled

If nested tsc scaling is disabled, MSR_AMD64_TSC_RATIO should
never have non default value.

Due to way nested tsc scaling support was implmented in qemu,
it would set this msr to 0 when nested tsc scaling was disabled.
Ignore that value for now, as it causes no harm.

Fixes: 5228eb96

 ("KVM: x86: nSVM: implement nested TSC scaling")
Cc: stable@vger.kernel.org

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220223115649.319134-1-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

In current async pagefault logic, when a page is ready, KVM relies on
kvm_arch_can_dequeue_async_page_present() to determine whether to deliver
a READY event to the Guest. This function test token value of struct
kvm_vcpu_pv_apf_data, which must be reset to zero by Guest kernel when a
READY event is finished by Guest. If value is zero meaning that a READY
event is done, so the KVM can deliver another.
But the kvm_arch_setup_async_pf() may produce a valid token with zero
value, which is confused with previous mention and may lead the loss of
this READY event.

This bug may cause task blocked forever in Guest:
 INFO: task stress:7532 blocked for more than 1254 seconds.
       Not tainted 5.10.0 #16
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 task:stress          state:D stack:    0 pid: 7532 ppid:  1409
 flags:0x00000080
 Call Trace:
  __schedule+0x1e7/0x650
  schedule+0x46/0xb0
  kvm_async_pf_task_wait_schedule+0xad/0xe0
  ? exit_to_user_mode_prepare+0x60/0x70
  __kvm_handle_async_pf+0x4f/0xb0
  ? asm_exc_page_fault+0x8/0x30
  exc_page_fault+0x6f/0x110
  ? asm_exc_page_fault+0x8/0x30
  asm_exc_page_fault+0x1e/0x30
 RIP: 0033:0x402d00
 RSP: 002b:00007ffd31912500 EFLAGS: 00010206
 RAX: 0000000000071000 RBX: ffffffffffffffff RCX: 00000000021a32b0
 RDX: 000000000007d011 RSI: 000000000007d000 RDI: 00000000021262b0
 RBP: 00000000021262b0 R08: 0000000000000003 R09: 0000000000000086
 R10: 00000000000000eb R11: 00007fefbdf2baa0 R12: 0000000000000000
 R13: 0000000000000002 R14: 000000000007d000 R15: 0000000000001000

Signed-off-by: Liang Zhang <zhangliang5@huawei.com>
Message-Id: <20220222031239.1076682-1-zhangliang5@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

As Jakub noticed, prints should be avoided on the datapath.
Also, as packets would never come to the else branch in
ping_lookup(), remove pr_err() from ping_lookup().

Fixes: 35a79e64

 ("ping: fix the dif and sdif check in ping_lookup")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/1ef3f2fcd31bd681a193b1fcf235eee1603819bd.1645674068.git.lucien.xin@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Revert of a patch that instead of fixing a AQ error when trying
to reset BW limit introduced several regressions related to
creation and managing TC. Currently there are errors when creating
a TC on both PF and VF.

Error log:
[17428.783095] i40e 0000:3b:00.1: AQ command Config VSI BW allocation per TC failed = 14
[17428.783107] i40e 0000:3b:00.1: Failed configuring TC map 0 for VSI 391
[17428.783254] i40e 0000:3b:00.1: AQ command Config VSI BW allocation per TC failed = 14
[17428.783259] i40e 0000:3b:00.1: Unable to  configure TC map 0 for VSI 391

This reverts commit 3d250466.

Fixes: 3d250466

 (i40e: Fix reset bw limit when DCB enabled with 1 TC)
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220223175347.1690692-1-anthony.l.nguyen@intel.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ipv6 ttl, label and tos fields are modified without first
pulling/pushing the ipv6 header, which would have updated
the hw csum (if available). This might cause csum validation
when sending the packet to the stack, as can be seen in
the trace below.

Fix this by updating skb->csum if available.

Trace resulted by ipv6 ttl dec and then sending packet
to conntrack [actions: set(ipv6(hlimit=63)),ct(zone=99)]:
[295241.900063] s_pf0vf2: hw csum failure
[295241.923191] Call Trace:
[295241.925728]  <IRQ>
[295241.927836]  dump_stack+0x5c/0x80
[295241.931240]  __skb_checksum_complete+0xac/0xc0
[295241.935778]  nf_conntrack_tcp_packet+0x398/0xba0 [nf_conntrack]
[295241.953030]  nf_conntrack_in+0x498/0x5e0 [nf_conntrack]
[295241.958344]  __ovs_ct_lookup+0xac/0x860 [openvswitch]
[295241.968532]  ovs_ct_execute+0x4a7/0x7c0 [openvswitch]
[295241.979167]  do_execute_actions+0x54a/0xaa0 [openvswitch]
[295242.001482]  ovs_execute_actions+0x48/0x100 [openvswitch]
[295242.006966]  ovs_dp_process_packet+0x96/0x1d0 [openvswitch]
[295242.012626]  ovs_vport_receive+0x6c/0xc0 [openvswitch]
[295242.028763]  netdev_frame_hook+0xc0/0x180 [openvswitch]
[295242.034074]  __netif_receive_skb_core+0x2ca/0xcb0
[295242.047498]  netif_receive_skb_internal+0x3e/0xc0
[295242.052291]  napi_gro_receive+0xba/0xe0
[295242.056231]  mlx5e_handle_rx_cqe_mpwrq_rep+0x12b/0x250 [mlx5_core]
[295242.062513]  mlx5e_poll_rx_cq+0xa0f/0xa30 [mlx5_core]
[295242.067669]  mlx5e_napi_poll+0xe1/0x6b0 [mlx5_core]
[295242.077958]  net_rx_action+0x149/0x3b0
[295242.086762]  __do_softirq+0xd7/0x2d6
[295242.090427]  irq_exit+0xf7/0x100
[295242.093748]  do_IRQ+0x7f/0xd0
[295242.096806]  common_interrupt+0xf/0xf
[295242.100559]  </IRQ>
[295242.102750] RIP: 0033:0x7f9022e88cbd
[295242.125246] RSP: 002b:00007f9022282b20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffda
[295242.132900] RAX: 0000000000000005 RBX: 0000000000000010 RCX: 0000000000000000
[295242.140120] RDX: 00007f9022282ba8 RSI: 00007f9022282a30 RDI: 00007f9014005c30
[295242.147337] RBP: 00007f9014014d60 R08: 0000000000000020 R09: 00007f90254a8340
[295242.154557] R10: 00007f9022282a28 R11: 0000000000000246 R12: 0000000000000000
[295242.161775] R13: 00007f902308c000 R14: 000000000000002b R15: 00007f9022b71f40

Fixes: 3fdbd1ce

 ("openvswitch: add ipv6 'set' action")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Link: https://lore.kernel.org/r/20220223163416.24096-1-paulb@nvidia.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

valid_lft, prefered_lft and tstamp are always accessed under the lock
"lock" in other places. Reading these without taking the lock may result
in inconsistencies regarding the calculation of the valid and preferred
variables since decisions are taken on these fields for those variables.

Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Niels Dossche <niels.dossche@ugent.be>
Link: https://lore.kernel.org/r/20220223131954.6570-1-niels.dossche@ugent.be


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

smc_pnetid_by_table_ib() uses read_lock() and then it calls smc_pnet_apply_ib()
which, in turn, calls mutex_lock(&smc_ib_devices.mutex).

read_lock() disables preemption. Therefore, the code acquires a mutex while in
atomic context and it leads to a SAC bug.

Fix this bug by replacing the rwlock with a mutex.

Reported-and-tested-by:  <syzbot+4f322a6d84e991c38775@syzkaller.appspotmail.com>
Fixes: 64e28b52

 ("net/smc: add pnet table namespace support")
Confirmed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20220223100252.22562-1-fmdefrancesco@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit b7a49f73 ("bnx2x: Utilize firmware 7.13.21.0") added
new firmware support in the driver with maintaining older firmware
compatibility. However, older firmware was not added in MODULE_FIRMWARE()
which caused missing firmware files in initrd image leading to driver load
failure from initrd. This patch adds MODULE_FIRMWARE() for older firmware
version to have firmware files included in initrd.

Fixes: b7a49f73 ("bnx2x: Utilize firmware 7.13.21.0")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215627


Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20220223085720.12021-1-manishc@marvell.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit 2afeec08.

The reasoning in the commit was wrong - the code expected to setup the
watch even if 'hotplug-status' didn't exist. In fact, it relied on the
watch being fired the first time - to check if maybe 'hotplug-status' is
already set to 'connected'. Not registering a watch for non-existing
path (which is the case if hotplug script hasn't been executed yet),
made the backend not waiting for the hotplug script to execute. This in
turns, made the netfront think the interface is fully operational, while
in fact it was not (the vif interface on xen-netback side might not be
configured yet).

This was a workaround for 'hotplug-status' erroneously being removed.
But since that is reverted now, the workaround is not necessary either.

More discussion at
https://lore.kernel.org/xen-devel/afedd7cb-a291-e773-8b0d-4db9b291fa98@ipxe.org/T/#u



Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Michael Brown <mbrown@fensystems.co.uk>
Link: https://lore.kernel.org/r/20220222001817.2264967-2-marmarek@invisiblethingslab.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit 1f256578.

The 'hotplug-status' node should not be removed as long as the vif
device remains configured. Otherwise the xen-netback would wait for
re-running the network script even if it was already called (in case of
the frontent re-connecting). But also, it _should_ be removed when the
vif device is destroyed (for example when unbinding the driver) -
otherwise hotplug script would not configure the device whenever it
re-appear.

Moving removal of the 'hotplug-status' node was a workaround for nothing
calling network script after xen-netback module is reloaded. But when
vif interface is re-created (on xen-netback unbind/bind for example),
the script should be called, regardless of who does that - currently
this case is not handled by the toolstack, and requires manual
script call. Keeping hotplug-status=connected to skip the call is wrong
and leads to not configured interface.

More discussion at
https://lore.kernel.org/xen-devel/afedd7cb-a291-e773-8b0d-4db9b291fa98@ipxe.org/T/#u



Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20220222001817.2264967-1-marmarek@invisiblethingslab.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 5.17

 - send H2CData PDUs based on MAXH2CDATA (Varun Prakash)
 - fix passthrough to namespaces with unsupported features (me)"

* tag 'nvme-5.17-2022-02-24' of git://git.infradead.org/nvme:
  nvme-tcp: send H2CData PDUs based on MAXH2CDATA
  nvme: also mark passthrough-only namespaces ready in nvme_update_ns_info
  nvme: don't return an error from nvme_configure_metadata

Merge tag 'usb-serial-5.17-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for 5.17-rc6

Here's a revert of a commit which erroneously added a device id used for
the EPP/MEM mode of ch341 devices.

Included are also some new modem device ids.

All have been in linux-next with no reported issues.

* tag 'usb-serial-5.17-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: option: add Telit LE910R1 compositions
  USB: serial: option: add support for DW5829e
  Revert "USB: serial: ch341: add new Product ID for CH341A"

The battery on the 2nd hand Surface 3 which I recently bought appears to
not have a serial number programmed in. This results in any I2C reads from
the registers containing the serial number failing with an I2C NACK.

This was causing mshw0011_bix() to fail causing the battery readings to
not work at all.

Ignore EREMOTEIO (I2C NACK) errors when retrieving the serial number and
continue with an empty serial number to fix this.

Fixes: b1f81b49 ("platform/x86: surface3_power: MSHW0011 rev-eng implementation")
BugLink: https://github.com/linux-surface/linux-surface/issues/608


Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220224101848.7219-1-hdegoede@redhat.com

commit 59348401 ("platform/x86: amd-pmc: Add special handling for
timer based S0i3 wakeup") adds support for using another platform timer
in lieu of the RTC which doesn't work properly on some systems. This path
was validated and worked well before submission. During the 5.16-rc1 merge
window other patches were merged that caused this to stop working properly.

When this feature was used with 5.16-rc1 or later some OEM laptops with the
matching firmware requirements from that commit would shutdown instead of
program a timer based wakeup.

This was bisected to commit 8d89835b

 ("PM: suspend: Do not pause
cpuidle in the suspend-to-idle path").  This wasn't supposed to cause any
negative impacts and also tested well on both Intel and ARM platforms.
However this changed the semantics of when CPUs are allowed to be in the
deepest state. For the AMD systems in question it appears this causes a
firmware crash for timer based wakeup.

It's hypothesized to be caused by the `amd-pmc` driver sending `OS_HINT`
and all the CPUs going into a deep state while the timer is still being
programmed. It's likely a firmware bug, but to avoid it don't allow setting
CPUs into the deepest state while using CZN timer wakeup path.

If later it's discovered that this also occurs from "regular" suspends
without a timer as well or on other silicon, this may be later expanded to
run in the suspend path for more scenarios.

Cc: stable@vger.kernel.org # 5.16+
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/linux-acpi/BL1PR12MB51570F5BD05980A0DCA1F3F4E23A9@BL1PR12MB5157.namprd12.prod.outlook.com/T/#mee35f39c41a04b624700ab2621c795367f19c90e
Fixes: 8d89835b ("PM: suspend: Do not pause cpuidle in the suspend-to-idle path")
Fixes: 23f62d7a ("PM: sleep: Pause cpuidle later and resume it earlier during system transitions")
Fixes: 59348401

 ("platform/x86: amd-pmc: Add special handling for timer based S0i3 wakeup"
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220223175237.6209-1-mario.limonciello@amd.com


Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

There's no lock for rndis response list. It could cause list corruption
if there're two different list_add at the same time like below.
It's better to add in rndis_add_response / rndis_free_response
/ rndis_get_next_response to prevent any race condition on response list.

[  361.894299] [1:   irq/191-dwc3:16979] list_add corruption.
next->prev should be prev (ffffff80651764d0),
but was ffffff883dc36f80. (next=ffffff80651764d0).

[  361.904380] [1:   irq/191-dwc3:16979] Call trace:
[  361.904391] [1:   irq/191-dwc3:16979]  __list_add_valid+0x74/0x90
[  361.904401] [1:   irq/191-dwc3:16979]  rndis_msg_parser+0x168/0x8c0
[  361.904409] [1:   irq/191-dwc3:16979]  rndis_command_complete+0x24/0x84
[  361.904417] [1:   irq/191-dwc3:16979]  usb_gadget_giveback_request+0x20/0xe4
[  361.904426] [1:   irq/191-dwc3:16979]  dwc3_gadget_giveback+0x44/0x60
[  361.904434] [1:   irq/191-dwc3:16979]  dwc3_ep0_complete_data+0x1e8/0x3a0
[  361.904442] [1:   irq/191-dwc3:16979]  dwc3_ep0_interrupt+0x29c/0x3dc
[  361.904450] [1:   irq/191-dwc3:16979]  dwc3_process_event_entry+0x78/0x6cc
[  361.904457] [1:   irq/191-dwc3:16979]  dwc3_process_event_buf+0xa0/0x1ec
[  361.904465] [1:   irq/191-dwc3:16979]  dwc3_thread_interrupt+0x34/0x5c

Fixes: f6281af9

 ("usb: gadget: rndis: use list_for_each_entry_safe")
Cc: stable <stable@kernel.org>
Signed-off-by: Daehwan Jung <dh10.jung@samsung.com>
Link: https://lore.kernel.org/r/1645507768-77687-1-git-send-email-dh10.jung@samsung.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The interrupt service routine registered for the gadget is a primary
handler which mask the interrupt source and a threaded handler which
handles the source of the interrupt. Since the threaded handler is
voluntary threaded, the IRQ-core does not disable bottom halves before
invoke the handler like it does for the forced-threaded handler.

Due to changes in networking it became visible that a network gadget's
completions handler may schedule a softirq which remains unprocessed.
The gadget's completion handler is usually invoked either in hard-IRQ or
soft-IRQ context. In this context it is enough to just raise the softirq
because the softirq itself will be handled once that context is left.
In the case of the voluntary threaded handler, there is nothing that
will process pending softirqs. Which means it remain queued until
another random interrupt (on this CPU) fires and handles it on its exit
path or another thread locks and unlocks a lock with the bh suffix.
Worst case is that the CPU goes idle and the NOHZ complains about
unhandled softirqs.

Disable bottom halves before acquiring the lock (and disabling
interrupts) and enable them after dropping the lock. This ensures that
any pending softirqs will handled right away.

Link: https://lkml.kernel.org/r/c2a64979-73d1-2c22-e048-c275c9f81558@samsung.com
Fixes: e5f68b4a

 ("Revert "usb: dwc3: gadget: remove unnecessary _irqsave()"")
Cc: stable <stable@kernel.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/Yg/YPejVQH3KkRVd@linutronix.de


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Assure that host may not manipulate the index to point
past endpoint array.

Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Saeed Mahameed says:

====================
mlx5 fixes 2022-02-22

This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.

* tag 'mlx5-fixes-2022-02-23' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: Fix VF min/max rate parameters interchange mistake
  net/mlx5e: Add missing increment of count
  net/mlx5e: MPLSoUDP decap, fix check for unsupported matches
  net/mlx5e: Fix MPLSoUDP encap to use MPLS action information
  net/mlx5e: Add feature check for set fec counters
  net/mlx5e: TC, Skip redundant ct clear actions
  net/mlx5e: TC, Reject rules with forward and drop actions
  net/mlx5e: TC, Reject rules with drop and modify hdr action
  net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets
  net/mlx5e: Fix wrong return value on ioctl EEPROM query failure
  net/mlx5: Fix possible deadlock on rule deletion
  net/mlx5: Fix tc max supported prio for nic mode
  net/mlx5: Fix wrong limitation of metadata match on ecpf
  net/mlx5: Update log_max_qp value to be 17 at most
  net/mlx5: DR, Fix the threshold that defines when pool sync is initiated
  net/mlx5: DR, Don't allow match on IP w/o matching on full ethertype/ip_version
  net/mlx5: DR, Fix slab-out-of-bounds in mlx5_cmd_dr_create_fte
  net/mlx5: DR, Cache STE shadow memory
  net/mlx5: Update the list of the PCI supported devices
====================

Link: https://lore.kernel.org/r/20220224001123.365265-1-saeed@kernel.org


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'amd-drm-fixes-5.17-2022-02-23' of https://gitlab.freedesktop.org/agd5f/linux

 into drm-fixes

amd-drm-fixes-5.17-2022-02-23:

amdgpu:
- Display FP fix
- PCO powergating fix
- RDNA2 OEM SKU stability fixes
- Display PSR fix
- PCI ASPM fix
- Display link encoder fix for TEST_COMMIT
- Raven2 suspend/resume fix
- Fix a regression in virtual display support
- GPUVM eviction fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223214623.28823-1-alexander.deucher@amd.com

drm/tegra: Fixes for v5.17-rc6

Contains a couple of fixes for Tegra186 suspend/resume, syncpoint
waiting, a build warning and eDP on older Tegra devices.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223161903.293392-1-thierry.reding@gmail.com

 * edid: Always set RGB444
 * imx/dcss: Select GEM CMA helpers
 * radeon: Fix some variables's type
 * vc4: Fix codec cleanup; Fix PM reference counting

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YhaKj4zWJ42YWRts@linux-uq9g.fritz.box

Pull devicetree fixes from Rob Herring:

 - Update some maintainers email addresses

 - Fix handling of elfcorehdr reservation for crash dump kernel

 - Fix unittest expected warnings text

* tag 'devicetree-fixes-for-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: update Roger Quadros email
  MAINTAINERS: sifive: drop Yash Shah
  of/fdt: move elfcorehdr reservation early for crash dump kernel
  of: unittest: update text of expected warnings

Pull selinux fix from Paul Moore:
 "A second small SELinux fix which addresses an incorrect
  mutex_is_locked() check"

* tag 'selinux-pr-20220223' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: fix misuse of mutex_is_locked()