arch/x86/kernel/cpu/intel_cacheinfo.c:355:7: warning: symbol 'i' shadows an earlier one
arch/x86/kernel/cpu/intel_cacheinfo.c:296:39: originally declared here
arch/x86/kernel/cpu/intel_cacheinfo.c:367:18: warning: incorrect type in argument 2 (different signedness)
arch/x86/kernel/cpu/intel_cacheinfo.c:367:18:    expected unsigned int *eax
arch/x86/kernel/cpu/intel_cacheinfo.c:367:18:    got int *
arch/x86/kernel/cpu/intel_cacheinfo.c:367:28: warning: incorrect type in argument 3 (different signedness)
arch/x86/kernel/cpu/intel_cacheinfo.c:367:28:    expected unsigned int *ebx
arch/x86/kernel/cpu/intel_cacheinfo.c:367:28:    got int *
arch/x86/kernel/cpu/intel_cacheinfo.c:367:38: warning: incorrect type in argument 4 (different signedness)
arch/x86/kernel/cpu/intel_cacheinfo.c:367:38:    expected unsigned int *ecx
arch/x86/kernel/cpu/intel_cacheinfo.c:367:38:    got int *
arch/x86/kernel/cpu/intel_cacheinfo.c:367:48: warning: incorrect type in argument 5 (different signedness)
arch/x86/kernel/cpu/intel_cacheinfo.c:367:48:    expected unsigned int *edx
arch/x86/kernel/cpu/intel_cacheinfo.c:367:48:    got int *

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (454 commits)
  [POWERPC] Cell IOMMU fixed mapping support
  [POWERPC] Split out the ioid fetching/checking logic
  [POWERPC] Add support to cell_iommu_setup_page_tables() for multiple windows
  [POWERPC] Split out the IOMMU logic from cell_dma_dev_setup()
  [POWERPC] Split cell_iommu_setup_hardware() into two parts
  [POWERPC] Split out the logic that allocates struct iommus
  [POWERPC] Allocate the hash table under 1G on cell
  [POWERPC] Add set_dma_ops() to match get_dma_ops()
  [POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
  [POWERPC] 85xx: Only invalidate TLB0 and TLB1
  [POWERPC] 83xx: Fix typo in mpc837x compatible entries
  [POWERPC] 85xx: convert sbc85* boards to use machine_device_initcall
  [POWERPC] 83xx: rework platform Kconfig
  [POWERPC] 85xx: rework platform Kconfig
  [POWERPC] 86xx: Remove unused IRQ defines
  [POWERPC] QE: Explicitly set address-cells and size cells for muram
  [POWERPC] Convert StorCenter DTS file to /dts-v1/ format.
  [POWERPC] 86xx: Convert all 86xx DTS files to /dts-v1/ format.
  [PPC] Remove 85xx from arch/ppc
  [PPC] Remove 83xx from arch/ppc
  ...

This patch adds support for setting up a fixed IOMMU mapping on certain
cell machines.  For 64-bit devices this avoids the performance overhead of
mapping and unmapping pages at runtime.  32-bit devices are unable to use
the fixed mapping.

The fixed mapping is established at boot, and maps all of physical memory
1:1 into device space at some offset.  On machines with < 30 GB of memory
we setup the fixed mapping immediately above the normal IOMMU window.

For example a machine with 4GB of memory would end up with the normal
IOMMU window from 0-2GB and the fixed mapping window from 2GB to 6GB. In
this case a 64-bit device wishing to DMA to 1GB would be told to DMA to
3GB, plus any offset required by firmware.  The firmware offset is encoded
in the "dma-ranges" property.

On machines with 30GB or more of memory, we are unable to place the fixed
mapping above the normal IOMMU window as we would run out of address space.
Instead we move the normal IOMMU window to coincide with the hash page
table, this region does not need to be part of the fixed mapping as no
device should ever be DMA'ing to it.  We then setup the fixed mapping
from 0 to 32GB.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Split out the ioid fetching and checking logic so we can use it elsewhere
in a subsequent patch.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Add support to cell_iommu_setup_page_tables() for handling two windows,
the dynamic window and the fixed window.  A fixed window size of 0
indicates that there is no fixed window at all.

Currently there are no callers who pass a non-zero fixed window, but the
upcoming fixed IOMMU mapping patch will change that.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Split the IOMMU logic out from cell_dma_dev_setup() into a separate
function.  If we're not using dma_direct_ops or dma_iommu_ops we don't
know what the hell's going on, so BUG.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Split cell_iommu_setup_hardware() into two parts.  Split the page table
setup into cell_iommu_setup_page_tables() and the bits that kick the
hardware into cell_iommu_enable_hardware().

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Split out the logic that allocates a struct iommu into a separate
function.  This can fail however the calling code has never cared - so
just return if we can't allocate an iommu.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

In order to support the fixed IOMMU mapping (in a subsequent patch),
we need the hash table to be inside the IOMMUs DMA window.  This is
usually 2G, but let's make sure the hash table is under 1G as that
will satisfy the IOMMU requirements and also means the hash table will
be on node 0.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  alpha: fix x86.git merge build error
  ia64: on UP percpu variables are not small memory model
  x86: fix arch/x86/kernel/test_nx.c modular build bug
  s390: use generic percpu linux-2.6.git
  POWERPC: use generic per cpu
  ia64: use generic percpu
  SPARC64: use generic percpu
  percpu: change Kconfig to HAVE_SETUP_PER_CPU_AREA
  modules: fold percpu_modcopy into module.c
  x86: export copy_from_user_ll_nocache[_nozero]
  x86: fix duplicated TIF on 64-bit

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (26 commits)
  firewire: fw-sbp2: Use sbp2 device-provided mgt orb timeout for logins
  firewire: fw-sbp2: increase login orb reply timeout, fix "failed to login"
  firewire: replace subtraction with bitwise and
  firewire: fw-core: react on bus resets while the config ROM is being fetched
  firewire: enforce access order between generation and node ID, fix "giving up on config rom"
  firewire: fw-cdev: use device generation, not card generation
  firewire: fw-sbp2: use device generation, not card generation
  firewire: fw-sbp2: try to increase reconnect_hold (speed up reconnection)
  firewire: fw-sbp2: skip unnecessary logout
  firewire vs. ieee1394: clarify MAINTAINERS
  firewire: fw-ohci: Dynamically allocate buffers for DMA descriptors
  firewire: fw-ohci: CycleTooLong interrupt management
  firewire: Fix extraction of source node id
  firewire: fw-ohci: Bug fixes for packet-per-buffer support
  firewire: fw-ohci: Fix for dualbuffer three-or-more buffers
  firewire: fw-sbp2: remove unused misleading macro
  firewire: fw-sbp2: prepare for s/g chaining
  firewire: fw-sbp2: refactor workq and kref handling
  ieee1394: ohci1394: don't schedule IT tasklets on IR events
  ieee1394: sbp2: raise default transfer size limit
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] use SGI_HAS_INDYDOG for INDYDOG depends

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (27 commits)
  lguest: use __PAGE_KERNEL instead of _PAGE_KERNEL
  lguest: Use explicit includes rateher than indirect
  lguest: get rid of lg variable assignments
  lguest: change gpte_addr header
  lguest: move changed bitmap to lg_cpu
  lguest: move last_pages to lg_cpu
  lguest: change last_guest to last_cpu
  lguest: change spte_addr header
  lguest: per-vcpu lguest pgdir management
  lguest: make pending notifications per-vcpu
  lguest: makes special fields be per-vcpu
  lguest: per-vcpu lguest task management
  lguest: replace lguest_arch with lg_cpu_arch.
  lguest: make registers per-vcpu
  lguest: make emulate_insn receive a vcpu struct.
  lguest: map_switcher_in_guest() per-vcpu
  lguest: per-vcpu interrupt processing.
  lguest: per-vcpu lguest timers
  lguest: make hypercalls use the vcpu struct
  lguest: make write() operation smp aware
  ...

Manual conflict resolved (maybe even correctly, who knows) in
drivers/lguest/x86/core.c

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  security: compile capabilities by default
  selinux: make selinux_set_mnt_opts() static
  SELinux: Add warning messages on network denial due to error
  SELinux: Add network ingress and egress control permission checks
  NetLabel: Add auditing to the static labeling mechanism
  NetLabel: Introduce static network labels for unlabeled connections
  SELinux: Allow NetLabel to directly cache SIDs
  SELinux: Enable dynamic enable/disable of the network access checks
  SELinux: Better integration between peer labeling subsystems
  SELinux: Add a new peer class and permissions to the Flask definitions
  SELinux: Add a capabilities bitmap to SELinux policy version 22
  SELinux: Add a network node caching mechanism similar to the sel_netif_*() functions
  SELinux: Only store the network interface's ifindex
  SELinux: Convert the netif code to use ifindex values
  NetLabel: Add IP address family information to the netlbl_skbuff_getattr() function
  NetLabel: Add secid token support to the NetLabel secattr struct
  NetLabel: Consolidate the LSM domain mapping/hashing locks
  NetLabel: Cleanup the LSM domain hash functions
  NetLabel: Remove unneeded RCU read locks

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  PPC: Fix powerpc vio_find_name to not use devices_subsys
  Driver core: add bus_find_device_by_name function
  Module: check to see if we have a built in module with the same name
  x86: fix runtime error in arch/x86/kernel/cpu/mcheck/mce_amd_64.c
  Driver core: Fix up build when CONFIG_BLOCK=N

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (249 commits)
  KVM: Move apic timer migration away from critical section
  KVM: Put kvm_para.h include outside __KERNEL__
  KVM: Fix unbounded preemption latency
  KVM: Initialize the mmu caches only after verifying cpu support
  KVM: MMU: Fix dirty page setting for pages removed from rmap
  KVM: Portability: Move kvm_fpu to asm-x86/kvm.h
  KVM: x86 emulator: Only allow VMCALL/VMMCALL trapped by #UD
  KVM: MMU: Merge shadow level check in FNAME(fetch)
  KVM: MMU: Move kvm_free_some_pages() into critical section
  KVM: MMU: Switch to mmu spinlock
  KVM: MMU: Avoid calling gfn_to_page() in mmu_set_spte()
  KVM: Add kvm_read_guest_atomic()
  KVM: MMU: Concurrent guest walkers
  KVM: Disable vapic support on Intel machines with FlexPriority
  KVM: Accelerated apic support
  KVM: local APIC TPR access reporting facility
  KVM: Print data for unimplemented wrmsr
  KVM: MMU: Add cache miss statistic
  KVM: MMU: Coalesce remote tlb flushes
  KVM: Expose ioapic to ia64 save/restore APIs
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: (21 commits)
  dlm: static initialization improvements
  dlm: clean ups
  dlm: Sanity check namelen before copying it
  dlm: keep cached master rsbs during recovery
  dlm: change error message to debug
  dlm: fix possible use-after-free
  dlm: limit dir lookup loop
  dlm: reject normal unlock when lock is waiting for lookup
  dlm: validate messages before processing
  dlm: reject messages from non-members
  dlm: another call to confirm_master in receive_request_reply
  dlm: recover locks waiting for overlap replies
  dlm: clear ast_type when removing from astqueue
  dlm: use fixed errno values in messages
  dlm: swap bytes for rcom lock reply
  dlm: align midcomms message buffer
  dlm: close othercons
  dlm: use dlm prefix on alloc and free functions
  dlm: don't print common non-errors
  dlm: proper prototypes
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (21 commits)
  [SCSI] Revert "[SCSI] aacraid: fib context lock for management ioctls"
  [SCSI] bsg: copy the cmd_type field to the subordinate request for bidi
  [SCSI] handle scsi_init_queue failure properly
  [SCSI] destroy scsi_bidi_sdb_cache in scsi_exit_queue
  [SCSI] scsi_debug: add XDWRITEREAD_10 support
  [SCSI] scsi_debug: add bidi data transfer support
  [SCSI] scsi_debug: add get_data_transfer_info helper function
  [SCSI] remove use_sg_chaining
  [SCSI] bidirectional: fix up for the new blk_end_request code
  [SCSI] bidirectional command support
  [SCSI] implement scsi_data_buffer
  [SCSI] tgt: use scsi_init_io instead of scsi_alloc_sgtable
  [SCSI] aic7xxx: fix warnings with CONFIG_PM disabled
  [SCSI] aic79xx: fix warnings with CONFIG_PM disabled
  [SCSI] aic7xxx: fix ahc_done check SCB_ACTIVE for tagged transactions
  [SCSI] sgiwd93: use cached memory access to make driver work on IP28
  [SCSI] zfcp: fix sense_buffer access bug
  [SCSI] ncr53c8xx: fix sense_buffer access bug
  [SCSI] aic79xx: fix sense_buffer access bug
  [SCSI] hptiop: fix sense_buffer access bug
  ...

Fix docbook fatal error:
docproc: linux-2.6.24-git8/block/ll_rw_blk.c: No such file or directory

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix kernel-doc empty line warning:
Warning(linux-2.6.24-git8//drivers/base/class.c:866): bad line:

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

a5a19c63

 removed the include of
asm/pgalloc.h from asm-generic/tlb.h. That works fine on most
architectures, but broke ALPHA.

Fixup ALPHA by adding the include to asm-alpha/tlbflush.h

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Tony says:

| The CONFIG_SMP=n path in ia64 makes quite radical changes ... rather
| than putting all the per-cpu stuff into the top 64K of address space
| and providing a per-cpu TLB mapping for that range to a different
| physical address ... it just makes all the per-cpu stuff link as ordinary
| variables in .data.

the new generic percpu code got confused about this as PER_CPU_ATTRIBUTES
was defined even on UP, so it picked up that small memory model - which
was not possible to get linked. The right fix is to only define that
on SMP. This resolved the build failures in my cross-compiling environment.

also link these variables into the .percpu section even on UP - some
assembly code has offset dependencies. (such as GET_IA64_MCA_DATA() in
arch/ia64/kernel/mca_asm.S)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Tony Luck <tony.luck@intel.com>

fix this modular build bug:

>   CC [M]  arch/x86/kernel/test_nx.o
> {standard input}: Assembler messages:
> {standard input}:58: Error: cannot represent relocation type BFD_RELOC_64
> {standard input}:59: Error: cannot represent relocation type BFD_RELOC_64
> make[2]: *** [arch/x86/kernel/test_nx.o] Error 1
> make[1]: *** [arch/x86/kernel] Error 2

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Change s390 percpu.h to use asm-generic/percpu.h

Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Powerpc has a way to determine the address of the per cpu area of the
currently executing processor via the paca and the array of per cpu
offsets is avoided by looking up the per cpu area from the remote
paca's (copying x86_64).

Cc: Paul Mackerras <paulus@samba.org>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Olof Johansson <olof@lixom.net>
Tested-by: Geoff Levand <geoffrey.levand@am.sony.com>

ia64 has a special processor specific mapping that can be used to locate the
offset for the current per cpu area.

Cc: linux-ia64@vger.kernel.org
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Sparc64 has a way of providing the base address for the per cpu area of the
currently executing processor in a global register.

Sparc64 also provides a way to calculate the address of a per cpu area
from a base address instead of performing an array lookup.

Cc: David Miller <davem@davemloft.net>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Change:
	config ARCH_SETS_UP_PER_CPU_AREA
to:
	config HAVE_SETUP_PER_CPU_AREA

Cc: Andi Kleen <ak@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: David Miller <davem@davemloft.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: linuxppc-dev@ozlabs.org
Cc: linux-ia64@vger.kernel.org
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

percpu_modcopy() is defined multiple times in arch files. However, the only
user is module.c. Put a static definition into module.c and remove
the definitions from the arch files.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

commit 7e991604
and commit eee3af4a



Both use the same TIF number (25) in thread_info_64.h.

This patch changes the TIF ids.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

To be more compliant with section 7.4.8 of the SBP-2 specification,
use the mgt_ORB_timeout specified in the SBP-2 device's config rom
for login ORB attempts (though with some sanity checks). A happy
side-effect is that certain device and controller combinations that
sometimes take more than 20 seconds to get synced up (like my laptop
with just about any SBP-2 device) now function more reliably.

Signed-off-by: Jarod Wilson <jwilson@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (silenced sparse)

Increase (and rename) the login orb reply timeout value to 20s
to match that of the old firewire stack. 2s simply didn't give
many devices enough time to spin up and reply.

Fixes inability to recognize some devices.
Failure mode was "orb reply timed out"/"failed to login".

Signed-off-by: Jarod Wilson <jwilson@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (style, comments, changelog)

Replace an unnecessary subtraction with a bitwise AND when determining the
value of ext_tcode in fw_fill_transaction() to save a cpu cycle or two in a
somewhat critical path.

Signed-off-by: Jarod Wilson <jwilson@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

read_rom() obtained a fresh new fw_device.generation for each read
transaction.  Hence it was able to continue reading in the middle of the
ROM even if a bus reset happened.  However the device may have modified
the ROM during the reset.  We would end up with a corrupt fetched ROM
image then.

Although all of this is quite unlikely, it is not impossible.
Therefore we now restart reading the ROM if the bus generation changed.

Note, the memory barrier in read_rom() is still necessary according to
tests by Jarod Wilson, despite of the ->generation access being moved up
in the call chain.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

This is essentially what I've been beating on locally, and I've yet to hit
another config rom read failure with it.

Signed-off-by: Jarod Wilson <jwilson@redhat.com>

fw_device.node_id and fw_device.generation are accessed without mutexes.
We have to ensure that all readers will get to see node_id updates
before generation updates.

Fixes an inability to recognize devices after "giving up on config rom",
https://bugzilla.redhat.com/show_bug.cgi?id=429950



Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

Reviewed by Nick Piggin <nickpiggin@yahoo.com.au>.

Verified to fix 'giving up on config rom' issues on multiple system and
drive combinations that were previously affected.

Signed-off-by: Jarod Wilson <jwilson@redhat.com>
Signed-off-by: Kristian Høgsberg <krh@redhat.com>

We have to use the fw_device.generation here, not the fw_card.generation,
because the generation must never be newer than the node ID when we emit
a transaction.  This cannot be guaranteed with fw_card.generation.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

Verified in concert with subsequent memory barriers patch to fix 'giving
up on config rom' issues on multiple system and drive combinations that
were previously affected.

Signed-off-by: Jarod Wilson <jwilson@redhat.com>