Backend drivers shouldn't transistion to CLOSED unless the frontend is
CLOSED.  If a backend does transition to CLOSED too soon then the
frontend may not see the CLOSING state and will not properly shutdown.

So, treat an unexpected backend CLOSED state the same as CLOSING.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When configuring GRE tunnel using OVS, tcp stream is distributed over
all RSS queues which may cause TCP reordering. It happens since OVS
uses L2GRE protocol when kernel gre uses IPGRE.
Patch defaults gre tunnel to L2GRE which allows proper RSS for L2GRE
packets and (implicitly) disables RSS for IPGRE traffic.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This device was mentioned in an OpenWRT forum.  Seems to have a "standard"
Sierra Wireless ifnumber to function layout:
 0: qcdm
 2: nmea
 3: modem
 8: qmi
 9: storage

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should check whether rtnetlink link operations
are defined before calling get_slave_size().

Without this, the following oops can occur when
adding a tap device to OVS.

[   87.839553] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8
[   87.839595] IP: [<ffffffff813d47c0>] if_nlmsg_size+0xf0/0x220
[...]
[   87.840651] Call Trace:
[   87.840664]  [<ffffffff813d694b>] ? rtmsg_ifinfo+0x2b/0x100
[   87.840688]  [<ffffffff813c8340>] ? __netdev_adjacent_dev_insert+0x150/0x1a0
[   87.840718]  [<ffffffff813d6a50>] ? rtnetlink_event+0x30/0x40
[   87.840742]  [<ffffffff814b4144>] ? notifier_call_chain+0x44/0x70
[   87.840768]  [<ffffffff813c8946>] ? __netdev_upper_dev_link+0x3c6/0x3f0
[   87.840798]  [<ffffffffa0678d6c>] ? netdev_create+0xcc/0x160 [openvswitch]
[   87.840828]  [<ffffffffa06781ea>] ? ovs_vport_add+0x4a/0xd0 [openvswitch]
[   87.840857]  [<ffffffffa0670139>] ? new_vport+0x9/0x50 [openvswitch]
[   87.840884]  [<ffffffffa067279e>] ? ovs_vport_cmd_new+0x11e/0x210 [openvswitch]
[   87.840915]  [<ffffffff813f3efa>] ? genl_family_rcv_msg+0x19a/0x360
[   87.840941]  [<ffffffff813f40c0>] ? genl_family_rcv_msg+0x360/0x360
[   87.840967]  [<ffffffff813f4139>] ? genl_rcv_msg+0x79/0xc0
[   87.840991]  [<ffffffff813b6cf9>] ? __kmalloc_reserve.isra.25+0x29/0x80
[   87.841018]  [<ffffffff813f2389>] ? netlink_rcv_skb+0xa9/0xc0
[   87.841042]  [<ffffffff813f27cf>] ? genl_rcv+0x1f/0x30
[   87.841064]  [<ffffffff813f1988>] ? netlink_unicast+0xe8/0x1e0
[   87.841088]  [<ffffffff813f1d9a>] ? netlink_sendmsg+0x31a/0x750
[   87.841113]  [<ffffffff813aee96>] ? sock_sendmsg+0x86/0xc0
[   87.841136]  [<ffffffff813c960d>] ? __netdev_update_features+0x4d/0x200
[   87.841163]  [<ffffffff813ca94e>] ? ethtool_get_value+0x2e/0x50
[   87.841188]  [<ffffffff813af269>] ? ___sys_sendmsg+0x359/0x370
[   87.841212]  [<ffffffff813da686>] ? dev_ioctl+0x1a6/0x5c0
[   87.841236]  [<ffffffff8109c210>] ? autoremove_wake_function+0x30/0x30
[   87.841264]  [<ffffffff813ac59d>] ? sock_do_ioctl+0x3d/0x50
[   87.841288]  [<ffffffff813aca68>] ? sock_ioctl+0x1e8/0x2c0
[   87.841312]  [<ffffffff811934bf>] ? do_vfs_ioctl+0x2cf/0x4b0
[   87.841335]  [<ffffffff813afeb9>] ? __sys_sendmsg+0x39/0x70
[   87.841362]  [<ffffffff814b86f9>] ? system_call_fastpath+0x16/0x1b
[   87.841386] Code: c0 74 10 48 89 ef ff d0 83 c0 07 83 e0 fc 48 98 49 01 c7 48 89 ef e8 d0 d6 fe ff 48 85 c0 0f 84 df 00 00 00 48 8b 90 08 07 00 00 <48> 8b 8a a8 00 00 00 31 d2 48 85 c9 74 0c 48 89 ee 48 89 c7 ff
[   87.841529] RIP  [<ffffffff813d47c0>] if_nlmsg_size+0xf0/0x220
[   87.841555]  RSP <ffff880221aa5950>
[   87.841569] CR2: 00000000000000a8
[   87.851442] ---[ end trace e42ab217691b4fc2 ]---

Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the trigger/event is hardcoded to 0, this patch adds
a new command line argument -i to select an arbitrary trigger/
event.

Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MII management bus clock is derived from the MAC clock by dividing it by
MIIMODER register CLKDIV field value. This value may need to be set up
in case it is undefined or its default value is too high (and
communication with PHY is too slow) or too low (and communication with
PHY is impossible). The value of CLKDIV is not specified directly, but
is derived from the MAC clock for the default MII management bus frequency
of 2.5MHz. The MAC clock may be specified in the platform data, or in
the 'clocks' device tree attribute.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

OpenCores 10/100 Mbps MAC does not support speeds above 100 Mbps, but does
not disable advertisement when PHY supports them. This results in
non-functioning network when the MAC is connected to a gigabit PHY connected
to a gigabit switch.

The fix is to disable gigabit speed advertisement on attached PHY
unconditionally.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a Gigabit PHY device is connected to a 10/100Mbits capable Ethernet
MAC, the driver will restrict the phydev->supported modes to mask off
Gigabit. If the Gigabit PHY comes out of reset with the Gigabit features
set by default in MII_CTRL1000, it will keep advertising these feature,
so by the time we call genphy_config_advert(), the condition on
phydev->supported having the Gigabit features on is false, and we do not
update MII_CTRL1000 with updated values, and we keep advertising Gigabit
features, eventually configuring the PHY for Gigabit whilst the Ethernet
MAC does not support that.

This patches fixes the problem by ensuring that the Gigabit feature bits
are always cleared in MII_CTRL1000, if the PHY happens to be a Gigabit
PHY, and then, if Gigabit features are supported, setting those and
updating MII_CTRL1000 accordingly.

Reported-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The trigger and events functionality can be useful even if packet
timestamping is not used, but the required PTP clock is only enabled
when packet timestamping is started. This patch moves the clock enable
to when the interface is configured.

Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the external timestamping code is hardcoded to use the
rising edge even though the hardware has configurable event edge
detection. This patch changes the code to use falling edge detection
if PTP_FALLING_EDGE is set in the user supplied flags.

Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set the SKBTX_IN_PROGRESS bit in tx_flags dp83640_txtstamp when doing
tx timestamps as per Documentation/networking/timestamping.txt.

Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RCU writer side should use rcu_dereference_protected() and not
rcu_dereference(), fix that. This also removes the "suspicious RCU usage"
warning seen when running with CONFIG_PROVE_RCU.

Also, don't use rcu_assign_pointer/rcu_dereference for pointers
which are invisible beyond the udp offload code.

Fixes: b582ef09

 ('net: Add GRO support for UDP encapsulating protocols')
Reported-by: Eric Dumazet <edumazet@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ding Tianhong says:

====================
bonding: Fix some issues for fail_over_mac

The parameter fail_over_mac only affect active-backup mode, if it was
set to active or follow and works with other modes, just like RR or XOR
mode, the bonding could not set all slaves to the master's address, it
will cause the slave could not work well with master.

v1->v2: According Jay's suggestion, that we should permit setting an option
	at any time, but only have it take effect in active-backup mode, so
	I add mode checking together with fail_over_mac during enslavement and
	rebuild the patches.

v2->v3: The correct way to fix the problem is that we should not add restrictions when
    	setting options, just need to modify the bond enslave and removal processing
    	to check the mode in addition to fail_over_mac when setting a slave's MAC during
    	enslavement. The change active slave processing already only calls the fail_over_mac
    	function when in active-backup mode.

	Remove the cleanup patch because the net-next is frozen now.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>

The fail_over_mac could be set to active or follow in any time for all modes,
so if the fail_over_mac is not none and the current mode is not active-backup,
the bond_set_mac_address() could not change the master and slave's MAC address.

In bond_set_mac_address(), the fail_over_mac should only affect AB mode, so modify
to check the mode in addition to fail_over_mac when setting bond's MAC address.

Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to bonding.txt, the fail_over_ma should only affect active-backup mode,
but I found that the fail_over_mac could be set to active or follow in all
modes, this will cause new slave could not be set to bond's MAC address at
enslave processing and restore its own MAC address at removal processing.

The correct way to fix the problem is that we should not add restrictions when
setting options, just need to modify the bond enslave and removal processing
to check the mode in addition to fail_over_mac when setting a slave's MAC during
enslavement. The change active slave processing already only calls the fail_over_mac
function when in active-backup mode.

Thanks for Jay's suggestion.

The patch also modify the pr_warning() to pr_warn().

Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Setting rt variable to NULL at the beginning of ip_tunnel_xmit()
missed possible use of this variable as a scratch value.

Also fixes a possible dst leak in tunnel_dst_check() :
If we had to call tunnel_dst_reset(), we forgot to
release the reference on dst.

Merges tunnel_dst_get()/tunnel_dst_check() into
a single tunnel_rtable_get() function for clarity.

Many thanks to Tommi for his report and tests.

Fixes: 7d442fab

 ("ipv4: Cache dst in tunnels")
Reported-by: Tommi Rantala <tt.rantala@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Tommi Rantala <tt.rantala@gmail.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Max Filippov says:

====================
OpenCores 10/100 MAC ethtool operations

this series implements ethtool callbacks for the ethoc driver as was
requested by Florian.

Changes v1->v2:
- fix {get,set}_settings return code in case there's no PHY;
- fix set_ringparam: check ring sizes, change ring sizes on the fly.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

TX and RX rings share memory and descriptors. Maximal number of
descriptors reported is one less than the total available nuber of
descriptors. For the set operation the requested number of TX descriptors
is rounded down to the nearest power of two (driver logic requirement).

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

The following methods are implemented:
- get link state (standard implementation);
- get timestamping info (standard implementation).

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

linux-can-fixes-for-3.14-20140129

Marc Kleine-Budde says:

====================
Arnd Bergmann provides a fix for the flexcan driver, enabling compilation on
all combinations of big and little endian on ARM and PowerPc. A patch by Ira W.
Snyder fixes uninitialized variable warnings in the janz-ican3 driver.
Rostislav Lisovy contributes a patch to propagate the SO_PRIORITY of raw
sockets to skbs.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

In https://bugzilla.redhat.com/show_bug.cgi?id=994438 and
https://bugzilla.redhat.com/show_bug.cgi?id=970480

  we
received different reports of e100 throwing the following
warning:

 [<c06a0ba5>] ? pci_disable_device+0x85/0x90
 [<c044a153>] warn_slowpath_fmt+0x33/0x40
 [<c06a0ba5>] pci_disable_device+0x85/0x90
 [<f7fdf7e0>] __e100_shutdown+0x80/0x120 [e100]
 [<c0476ca5>] ? check_preempt_curr+0x65/0x90
 [<f7fdf8d6>] e100_suspend+0x16/0x30 [e100]
 [<c06a1ebb>] pci_legacy_suspend+0x2b/0xb0
 [<c098fc0f>] ? wait_for_completion+0x1f/0xd0
 [<c06a2d50>] ? pci_pm_poweroff+0xb0/0xb0
 [<c06a2de4>] pci_pm_freeze+0x94/0xa0
 [<c0767bb7>] dpm_run_callback+0x37/0x80
 [<c076a204>] ? pm_wakeup_pending+0xc4/0x140
 [<c0767f12>] __device_suspend+0xb2/0x1f0
 [<c076806f>] async_suspend+0x1f/0x90
 [<c04706e5>] async_run_entry_fn+0x35/0x140
 [<c0478aef>] ? wake_up_process+0x1f/0x40
 [<c0464495>] process_one_work+0x115/0x370
 [<c0462645>] ? start_worker+0x25/0x30
 [<c0464dc5>] ? manage_workers.isra.27+0x1a5/0x250
 [<c0464f6e>] worker_thread+0xfe/0x330
 [<c0464e70>] ? manage_workers.isra.27+0x250/0x250
 [<c046a224>] kthread+0x94/0xa0
 [<c0997f37>] ret_from_kernel_thread+0x1b/0x28
 [<c046a190>] ? insert_kthread_work+0x30/0x30

This patch removes pci_disable_device() from __e100_shutdown().
pci_clear_master() is enough.

Signed-off-by: Michele Baldessari <michele@acksyn.org>
Tested-by: Mark Harig <idirectscm@aim.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Self generated skbuffs in net/can/bcm.c are setting a skb->sk reference but
no explicit destructor which is enforced since Linux 3.11 with commit
376c7311

 (net: add a temporary sanity check in skb_orphan()).

This patch adds some helper functions to make sure that a destructor is
properly defined when a sock reference is assigned to a CAN related skb.
To create an unshared skb owned by the original sock a common helper function
has been introduced to replace open coded functions to create CAN echo skbs.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Tested-by: Andre Naujoks <nautsch2@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The loop in vxlan_gro_receive() over the current set of candidates for
coalescing was wrongly aborted once a match was found. In rare cases,
this can cause a false-positives matching in the next layer GRO checks.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since udp_add_offload() can be called from non-sleepable context e.g
under this call tree from the vxlan driver use case:

  vxlan_socket_create() <-- holds the spinlock
  -> vxlan_notify_add_rx_port()
     -> udp_add_offload()  <-- schedules

we should allocate the udp_offloads structure in atomic manner.

Fixes: b582ef09

 ('net: Add GRO support for UDP encapsulating protocols')
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the GPIO bitbang MDIO driver is used instead of the Davinci MDIO driver
we need to configure the phy_id string differently. Otherwise this string
looks like this "gpio.6" instead of "gpio-0" and the PHY is not found when
phy_connect() is called.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Lukas Stockmann <lukas.stockmann@siemens.com>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull block IO driver changes from Jens Axboe:

 - bcache update from Kent Overstreet.

 - two bcache fixes from Nicholas Swenson.

 - cciss pci init error fix from Andrew.

 - underflow fix in the parallel IDE pg_write code from Dan Carpenter.
   I'm sure the 1 (or 0) users of that are now happy.

 - two PCI related fixes for sx8 from Jingoo Han.

 - floppy init fix for first block read from Jiri Kosina.

 - pktcdvd error return miss fix from Julia Lawall.

 - removal of IRQF_SHARED from the SEGA Dreamcast CD-ROM code from
   Michael Opdenacker.

 - comment typo fix for the loop driver from Olaf Hering.

 - potential oops fix for null_blk from Raghavendra K T.

 - two fixes from Sam Bradshaw (Micron) for the mtip32xx driver, fixing
   an OOM problem and a problem with handling security locked conditions

* 'for-3.14/drivers' of git://git.kernel.dk/linux-block: (47 commits)
  mg_disk: Spelling s/finised/finished/
  null_blk: Null pointer deference problem in alloc_page_buffers
  mtip32xx: Correctly handle security locked condition
  mtip32xx: Make SGL container per-command to eliminate high order dma allocation
  drivers/block/loop.c: fix comment typo in loop_config_discard
  drivers/block/cciss.c:cciss_init_one(): use proper errnos
  drivers/block/paride/pg.c: underflow bug in pg_write()
  drivers/block/sx8.c: remove unnecessary pci_set_drvdata()
  drivers/block/sx8.c: use module_pci_driver()
  floppy: bail out in open() if drive is not responding to block0 read
  bcache: Fix auxiliary search trees for key size > cacheline size
  bcache: Don't return -EINTR when insert finished
  bcache: Improve bucket_prio() calculation
  bcache: Add bch_bkey_equal_header()
  bcache: update bch_bkey_try_merge
  bcache: Move insert_fixup() to btree_keys_ops
  bcache: Convert sorting to btree_keys
  bcache: Convert debug code to btree_keys
  bcache: Convert btree_iter to struct btree_keys
  bcache: Refactor bset_tree sysfs stats
  ...

Pull core block IO changes from Jens Axboe:
 "The major piece in here is the immutable bio_ve series from Kent, the
  rest is fairly minor.  It was supposed to go in last round, but
  various issues pushed it to this release instead.  The pull request
  contains:

   - Various smaller blk-mq fixes from different folks.  Nothing major
     here, just minor fixes and cleanups.

   - Fix for a memory leak in the error path in the block ioctl code
     from Christian Engelmayer.

   - Header export fix from CaiZhiyong.

   - Finally the immutable biovec changes from Kent Overstreet.  This
     enables some nice future work on making arbitrarily sized bios
     possible, and splitting more efficient.  Related fixes to immutable
     bio_vecs:

        - dm-cache immutable fixup from Mike Snitzer.
        - btrfs immutable fixup from Muthu Kumar.

  - bio-integrity fix from Nic Bellinger, which is also going to stable"

* 'for-3.14/core' of git://git.kernel.dk/linux-block: (44 commits)
  xtensa: fixup simdisk driver to work with immutable bio_vecs
  block/blk-mq-cpu.c: use hotcpu_notifier()
  blk-mq: for_each_* macro correctness
  block: Fix memory leak in rw_copy_check_uvector() handling
  bio-integrity: Fix bio_integrity_verify segment start bug
  block: remove unrelated header files and export symbol
  blk-mq: uses page->list incorrectly
  blk-mq: use __smp_call_function_single directly
  btrfs: fix missing increment of bi_remaining
  Revert "block: Warn and free bio if bi_end_io is not set"
  block: Warn and free bio if bi_end_io is not set
  blk-mq: fix initializing request's start time
  block: blk-mq: don't export blk_mq_free_queue()
  block: blk-mq: make blk_sync_queue support mq
  block: blk-mq: support draining mq queue
  dm cache: increment bi_remaining when bi_end_io is restored
  block: fixup for generic bio chaining
  block: Really silence spurious compiler warnings
  block: Silence spurious compiler warnings
  block: Kill bio_pair_split()
  ...

Pull nfsd updates from Bruce Fields:
 - Handle some loose ends from the vfs read delegation support.
   (For example nfsd can stop breaking leases on its own in a
    fewer places where it can now depend on the vfs to.)
 - Make life a little easier for NFSv4-only configurations
   (thanks to Kinglong Mee).
 - Fix some gss-proxy problems (thanks Jeff Layton).
 - miscellaneous bug fixes and cleanup

* 'for-3.14' of git://linux-nfs.org/~bfields/linux: (38 commits)
  nfsd: consider CLAIM_FH when handing out delegation
  nfsd4: fix delegation-unlink/rename race
  nfsd4: delay setting current_fh in open
  nfsd4: minor nfs4_setlease cleanup
  gss_krb5: use lcm from kernel lib
  nfsd4: decrease nfsd4_encode_fattr stack usage
  nfsd: fix encode_entryplus_baggage stack usage
  nfsd4: simplify xdr encoding of nfsv4 names
  nfsd4: encode_rdattr_error cleanup
  nfsd4: nfsd4_encode_fattr cleanup
  minor svcauth_gss.c cleanup
  nfsd4: better VERIFY comment
  nfsd4: break only delegations when appropriate
  NFSD: Fix a memory leak in nfsd4_create_session
  sunrpc: get rid of use_gssp_lock
  sunrpc: fix potential race between setting use_gss_proxy and the upcall rpc_clnt
  sunrpc: don't wait for write before allowing reads from use-gss-proxy file
  nfsd: get rid of unused function definition
  Define op_iattr for nfsd4_open instead using macro
  NFSD: fix compile warning without CONFIG_NFSD_V3
  ...

Fix

  drivers/char/ipmi/ipmi_si_intf.c: In function 'ipmi_parisc_probe':
  drivers/char/ipmi/ipmi_si_intf.c:2752:2: error: 'rv' undeclared (first use in this function)
  drivers/char/ipmi/ipmi_si_intf.c:2752:2: note: each undeclared identifier is reported only once for each function it appears in

Introduced by commit d02b3709

 ("ipmi: Cleanup error return")

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Chris Mason reported a NULL pointer derefernence in generic_getxattr()
that was due to sb->s_xattr being NULL.

The reason is that the nfs #ifdef's for ACL support were misplaced, and
the nfs3 inode operations had the xattr operation pointers set up, even
though xattrs were not actually supported.  As a result, the xattr code
was being called without the infrastructure having been set up.

Move the #ifdef's appropriately.

Reported-and-tested-by: Chris Mason <clm@fb.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull drm updates from Dave Airlie:
 "Been a bit busy, first week of kids school, and waiting on other trees
  to go in before I could send this, so its a bit later than I'd
  normally like.

  Highlights:
   - core:
      timestamp fixes, lots of misc cleanups
   - new drivers:
      bochs virtual vga
   - vmwgfx:
      major overhaul for their nextgen virt gpu.
   - i915:
      runtime D3 on HSW, watermark fixes, power well work, fbc fixes,
      bdw is no longer prelim.
   - nouveau:
      gk110/208 acceleration, more pm groundwork, old overlay support
   - radeon:
      dpm rework and clockgating for CIK, pci config reset, big endian
      fixes
   - tegra:
      panel support and DSI support, build as module, prime.
   - armada, omap, gma500, rcar, exynos, mgag200, cirrus, ast:
      fixes
   - msm:
      hdmi support for mdp5"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (595 commits)
  drm/nouveau: resume display if any later suspend bits fail
  drm/nouveau: fix lock unbalance in nouveau_crtc_page_flip
  drm/nouveau: implement hooks for needed for drm vblank timestamping support
  drm/nouveau/disp: add a method to fetch info needed by drm vblank timestamping
  drm/nv50: fill in crtc mode struct members from crtc_mode_fixup
  drm/radeon/dce8: workaround for atom BlankCrtc table
  drm/radeon/DCE4+: clear bios scratch dpms bit (v2)
  drm/radeon: set si_notify_smc_display_change properly
  drm/radeon: fix DAC interrupt handling on DCE5+
  drm/radeon: clean up active vram sizing
  drm/radeon: skip async dma init on r6xx
  drm/radeon/runpm: don't runtime suspend non-PX cards
  drm/radeon: add ring to fence trace functions
  drm/radeon: add missing trace point
  drm/radeon: fix VMID use tracking
  drm: ast,cirrus,mgag200: use drm_can_sleep
  drm/gma500: Lock struct_mutex around cursor updates
  drm/i915: Fix the offset issue for the stolen GEM objects
  DRM: armada: fix missing DRM_KMS_FB_HELPER select
  drm/i915: Decouple GPU error reporting from ring initialisation
  ...

Pull slave-dma updates from Vinod Koul:
 - new driver for BCM2835 used in R-pi
 - new driver for MOXA ART
 - dma_get_any_slave_channel API for DT based systems
 - minor fixes and updates spread acrooss driver

[ The fsl-ssi dual fifo mode support addition clashed badly with the
  other changes to fsl-ssi that came in through the sound merge.  I did
  a very rough cut at fixing up the conflict, but Nicolin Chen (author
  of both sides) will need to verify and check things ]

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits)
  dmaengine: mmp_pdma: fix mismerge
  dma: pl08x: Export pl08x_filter_id
  acpi-dma: align documentation with kernel-doc format
  dma: fix vchan_cookie_complete() debug print
  DMA: dmatest: extend the "device" module parameter to 32 characters
  drivers/dma: fix error return code
  dma: omap: Set debug level to debugging messages
  dmaengine: fix kernel-doc style typos for few comments
  dma: tegra: add support for Tegra148/124
  dma: dw: use %pad instead of casting dma_addr_t
  dma: dw: join split up messages
  dma: dw: fix style of multiline comment
  dmaengine: k3dma: fix sparse warnings
  dma: pl330: Use dma_get_slave_channel() in the of xlate callback
  dma: pl330: Differentiate between submitted and issued descriptors
  dmaengine: sirf: Add device_slave_caps interface
  DMA: Freescale: change BWC from 256 bytes to 1024 bytes
  dmaengine: Add MOXA ART DMA engine driver
  dmaengine: Add DMA_PRIVATE to BCM2835 driver
  dma: imx-sdma: Assign a default script number for ROM firmware cases
  ...

Pull chrome platform cleanups and improvements from Olof Johansson:
 - Use deferred probing on Chrome OS platforms for the i2c device
   registration.  This fixes a long-standing race of initialization of
   touchpad/screen on Chromebooks.
 - Added in platform device registration for pstore console on supported
   hardware
 - Misc smaller fixes (__initdata, module exit cleanup, etc)

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform:
  platform/chrome: unregister platform driver/device when module exit
  platform/chrome: Make i2c_adapter_names static
  platform/chrome: chromeos_laptop - fix incorrect placement of __initdata tag
  platform/chrome: chromeos_laptop - Use deferred probing
  platform/chrome: chromeos_laptop - Restructure device associations
  platform/chrome: Add pstore platform_device

Pull IOMMU Updates from Joerg Roedel:
 "A few patches have been queued up for this merge window:

   - improvements for the ARM-SMMU driver (IOMMU_EXEC support, IOMMU
     group support)
   - updates and fixes for the shmobile IOMMU driver
   - various fixes to generic IOMMU code and the Intel IOMMU driver
   - some cleanups in IOMMU drivers (dev_is_pci() usage)"

* tag 'iommu-updates-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (36 commits)
  iommu/vt-d: Fix signedness bug in alloc_irte()
  iommu/vt-d: free all resources if failed to initialize DMARs
  iommu/vt-d, trivial: clean sparse warnings
  iommu/vt-d: fix wrong return value of dmar_table_init()
  iommu/vt-d: release invalidation queue when destroying IOMMU unit
  iommu/vt-d: fix access after free issue in function free_dmar_iommu()
  iommu/vt-d: keep shared resources when failed to initialize iommu devices
  iommu/vt-d: fix invalid memory access when freeing DMAR irq
  iommu/vt-d, trivial: simplify code with existing macros
  iommu/vt-d, trivial: use defined macro instead of hardcoding
  iommu/vt-d: mark internal functions as static
  iommu/vt-d, trivial: clean up unused code
  iommu/vt-d, trivial: check suitable flag in function detect_intel_iommu()
  iommu/vt-d, trivial: print correct domain id of static identity domain
  iommu/vt-d, trivial: refine support of 64bit guest address
  iommu/vt-d: fix resource leakage on error recovery path in iommu_init_domains()
  iommu/vt-d: fix a race window in allocating domain ID for virtual machines
  iommu/vt-d: fix PCI device reference leakage on error recovery path
  drm/msm: Fix link error with !MSM_IOMMU
  iommu/vt-d: use dedicated bitmap to track remapping entry allocation status
  ...

Pull watchdog updates from Wim Van Sebroeck:
 - new driver for bcm281xx watchdog device
 - new driver for gpio based watchdog devices
 - remove DEFINE_PCI_DEVICE_TABLE macro for watchdog device drivers
 - conversion of davinci_wdt and mpc8xxx_wdt to watchdog core
 - improvements on davinci_wdt, at91/dt, at91sam9_wdt and s3c2410_wdt
 - Auto-detect IO address and expand supported chips on w836* super-I/O
   chipsets
 - core: Make dt "timeout-sec" property work on drivers w/out min/max
 - fix Kconfig dependencies
 - sirf: Remove redundant of_match_ptr helper
 - mach-moxart: add restart handler
 - hpwdt patch to display better panic information
 - imx2_wdt: disable watchdog timer during low power mode

* git://www.linux-watchdog.org/linux-watchdog: (31 commits)
  watchdog: w83627hf_wdt: Reset watchdog trigger during initialization
  watchdog: w83627hf: Add support for W83697HF and W83697UG
  watchdog: w83627hf: Auto-detect IO address and supported chips
  watchdog: at91sam9_wdt: increase security margin on watchdog counter reset
  watchdog: at91sam9_wdt: avoid spurious watchdog reset during init
  watchdog: at91sam9_wdt: fix secs_to_ticks
  ARM: at91/dt: add watchdog properties to kizbox board
  ARM: at91/dt: add sam9 watchdog default options to SoCs
  watchdog: at91sam9_wdt: update device tree doc
  watchdog: at91sam9_wdt: better watchdog support
  watchdog: sp805_wdt depends also on ARM64
  watchdog: mach-moxart: add restart handler
  watchdog: mpc8xxx_wdt convert to watchdog core
  watchdog: sirf: Remove redundant of_match_ptr helper
  watchdog: hpwdt patch to display informative string
  watchdog: dw_wdt: remove build dependencies
  watchdog: imx2_wdt: disable watchdog timer during low power mode
  watchdog: s3c2410_wdt: Report when the watchdog reset the system
  watchdog: s3c2410_wdt: use syscon regmap interface to configure pmu register
  watchdog: s3c2410_wdt: Handle rounding a little better for timeout
  ...

Pull more i2c updates from Wolfram Sang:
 "Mostly bugfixes, small but wanted cleanups, and Paul's init.h removal
  applied"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: rcar: fix NACK error code
  i2c: update i2c_algorithm documentation
  i2c: rcar: use devm_clk_get to ensure clock is properly ref-counted
  i2c: rcar: do not print error if device nacks transfer
  i2c: rely on driver core when sanitizing devices
  i2c: delete non-required instances of include <linux/init.h>
  i2c: acorn: is tristate and should use module.h
  i2c: piix4: Standardize log messages
  i2c: piix4: Use different message for AMD Auxiliary SMBus Controller
  i2c: piix4: Add support for AMD ML and CZ SMBus changes