- Sep 11, 2016
-
-
Amir Vadai authored
Introduce classifying by metadata extracted by the tunnel device. Outer header fields - source/dest ip and tunnel id, are extracted from the metadata when classifying. For example, the following will add a filter on the ingress Qdisc of shared vxlan device named 'vxlan0'. To forward packets with outer src ip 11.11.0.2, dst ip 11.11.0.1 and tunnel id 11. The packets will be forwarded to tap device 'vnet0' (after metadata is released): $ tc filter add dev vxlan0 protocol ip parent ffff: \ flower \ enc_src_ip 11.11.0.2 \ enc_dst_ip 11.11.0.1 \ enc_key_id 11 \ dst_ip 11.11.11.1 \ action tunnel_key release \ action mirred egress redirect dev vnet0 The action tunnel_key, will be introduced in the next patch in this series. Signed-off-by:
Amir Vadai <amir@vadai.me> Signed-off-by:
Hadar Hen Zion <hadarh@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
Extract __ip_tun_set_dst() and __ipv6_tun_set_dst() out of ip_tun_rx_dst() and ipv6_tun_rx_dst(), to be used without supplying an skb. Signed-off-by:
Amir Vadai <amir@vadai.me> Signed-off-by:
Hadar Hen Zion <hadarh@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
Add utility functions to convert a 32 bits key into a 64 bits tunnel and vice versa. These functions will be used instead of cloning code in GRE and VXLAN, and in tc act_iptunnel which will be introduced in a following patch in this patchset. Signed-off-by:
Amir Vadai <amir@vadai.me> Signed-off-by:
Hadar Hen Zion <hadarh@mellanox.com> Reviewed-by:
Shmulik Ladkani <shmulik.ladkani@gmail.com> Acked-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Sep 10, 2016
-
-
Markus Elfring authored
* Multiplications for the size determination of memory allocations indicated that array data structures should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of data types by pointer dereferences to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Tobias Regnery says: ==================== alx: add msi-x support This patchset adds msi-x support to the alx driver. It is a preparatory series for multi queue support, which I am currently working on. As there is no advantage over msi interrupts without multi queue support, msi-x interrupts are disabled by default. In order to test for regressions, a new module parameter is added to enable msi-x interrupts. Based on information of the downstream driver at github.com/qca/alx ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tobias Regnery authored
msi-x support is default disabled in the alx driver. In order to test msi-x interrupts for regressions add a module parameter to the driver. Signed-off-by:
Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tobias Regnery authored
Add msi-x support to the alx driver. This is in preparation for multi queue support. msi-x interrupts are disabled by default because without multi queue support there is no advantage over msi interrupts. The performance numbers observed with iperf stay the same. Based on information of the downstream driver at github.com/qca/alx Signed-off-by:
Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tobias Regnery authored
Factor out the handling of misc interrupts into a new function. This function can be reused later for msi-x interrupts. Signed-off-by:
Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tobias Regnery authored
Introduce a new flag field for the advanced interrupt capatibilities and add new functions to enable and disable msi interrupts. These functions will be extended later to cover msi-x interrupts. We enable msi interrupts earlier in alx_init_intr because with msi-x and multi queue support the number of queues must be set before we allocate resources for the rx and tx paths. Signed-off-by:
Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Baoyou Xie authored
We get a few warnings when building kernel with W=1: drivers/net/ethernet/qlogic/qed/qed_l2.c:112:5: warning: no previous prototype for 'qed_sp_vport_start' [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qed/qed_sriov.c:110:6: warning: no previous prototype for 'qed_iov_is_valid_vfid' [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qed/qed_sriov.c:188:5: warning: no previous prototype for 'qed_iov_post_vf_bulletin' [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qed/qed_sriov.c:578:6: warning: no previous prototype for 'qed_iov_set_vfs_to_disable' [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qed/qed_sriov.c:1135:28: warning: no previous prototype for 'qed_iov_get_public_vf_info' [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qed/qed_sriov.c:1148:6: warning: no previous prototype for 'qed_iov_clean_vf' [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qed/qed_sriov.c:2444:5: warning: no previous prototype for 'qed_iov_chk_ucast' [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qed/qed_sriov.c:2762:5: warning: no previous prototype for 'qed_iov_vf_flr_cleanup' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by:
Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Daniel Borkmann says: ==================== Some BPF helper cleanups This series contains a couple of misc cleanups and improvements for BPF helpers. For details please see individual patches. We let this also sit for a few days with Fengguang's kbuild test robot, and there were no issues seen (besides one false positive, see last one for details). ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
This work adds BPF_CALL_<n>() macros and converts all the eBPF helper functions to use them, in a similar fashion like we do with SYSCALL_DEFINE<n>() macros that are used today. Motivation for this is to hide all the register handling and all necessary casts from the user, so that it is done automatically in the background when adding a BPF_CALL_<n>() call. This makes current helpers easier to review, eases to write future helpers, avoids getting the casting mess wrong, and allows for extending all helpers at once (f.e. build time checks, etc). It also helps detecting more easily in code reviews that unused registers are not instrumented in the code by accident, breaking compatibility with existing programs. BPF_CALL_<n>() internals are quite similar to SYSCALL_DEFINE<n>() ones with some fundamental differences, for example, for generating the actual helper function that carries all u64 regs, we need to fill unused regs, so that we always end up with 5 u64 regs as an argument. I reviewed several 0-5 generated BPF_CALL_<n>() variants of the .i results and they look all as expected. No sparse issue spotted. We let this also sit for a few days with Fengguang's kbuild test robot, and there were no issues seen. On s390, it barked on the "uses dynamic stack allocation" notice, which is an old one from bpf_perf_event_output{,_tp}() reappearing here due to the conversion to the call wrapper, just telling that the perf raw record/frag sits on stack (gcc with s390's -mwarn-dynamicstack), but that's all. Did various runtime tests and they were fine as well. All eBPF helpers are now converted to use these macros, getting rid of a good chunk of all the raw castings. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
When fetching ifindex, we don't need to test dev for being NULL since we're always guaranteed to have a valid dev for clsact programs. Thus, avoid this test in fast path. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Add BPF_SIZEOF() and BPF_FIELD_SIZEOF() macros to improve the code a bit which otherwise often result in overly long bytes_to_bpf_size(sizeof()) and bytes_to_bpf_size(FIELD_SIZEOF()) lines. So place them into a macro helper instead. Moreover, we currently have a BUILD_BUG_ON(BPF_FIELD_SIZEOF()) check in convert_bpf_extensions(), but we should rather make that generic as well and add a BUILD_BUG_ON() test in all BPF_SIZEOF()/BPF_FIELD_SIZEOF() users to detect any rewriter size issues at compile time. Note, there are currently none, but we want to assert that it stays this way. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Some minor misc cleanups, f.e. use sizeof(__u32) instead of hardcoding and in __bpf_skb_max_len(), I missed that we always have skb->dev valid anyway, so we can drop the unneeded test for dev; also few more other misc bits addressed here. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
If skb has a valid l4 hash, there is no point clearing hash and force a further flow dissection when a tunnel encapsulation is added. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Markus Elfring authored
* Multiplications for the size determination of memory allocations indicated that array data structures should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of data types by pointer dereferences to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Markus Elfring authored
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of a data structure by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'rxrpc-rewrite-20160908' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Rewrite data and ack handling This patch set constitutes the main portion of the AF_RXRPC rewrite. It consists of five fix/helper patches: (1) Fix ASSERTCMP's and ASSERTIFCMP's handling of signed values. (2) Update some protocol definitions slightly. (3) Use of an hlist for RCU purposes. (4) Removal of per-call sk_buff accounting (not really needed when skbs aren't being queued on the main queue). (5) Addition of a tracepoint to log incoming packets in the data_ready callback and to log the end of the data_ready callback. And then there are two patches that form the main part: (6) Preallocation of resources for incoming calls so that in patch (7) the data_ready handler can be made to fully instantiate an incoming call and make it live. This extends through into AFS so that AFS can preallocate its own incoming call resources. The preallocation size is capped at the listen() backlog setting - and that is capped at a sysctl limit which can be set between 4 and 32. The preallocation is (re)charged either by accepting/rejecting pending calls or, in the case of AFS, manually. If insufficient preallocation resources exist, a BUSY packet will be transmitted. The advantage of using this preallocation is that once a call is set up in the data_ready handler, DATA packets can be queued on it immediately rather than the DATA packets being queued for a background work item to do all the allocation and then try and sort out the DATA packets whilst other DATA packets may still be coming in and going either to the background thread or the new call. (7) Rewrite the handling of DATA, ACK and ABORT packets. In the receive phase, DATA packets are now held in per-call circular buffers with deduplication, out of sequence detection and suchlike being done in data_ready. Since there is only one producer and only once consumer, no locks need be used on the receive queue. Received ACK and ABORT packets are now parsed and discarded in data_ready to recycle resources as fast as possible. sk_buffs are no longer pulled, trimmed or cloned, but rather the offset and size of the content is tracked. This particularly affects jumbo DATA packets which need insertion into the receive buffer in multiple places. Annotations are kept to track which bit is which. Packets are no longer queued on the socket receive queue; rather, calls are queued. Dummy packets to convey events therefore no longer need to be invented and metadata packets can be discarded as soon as parsed rather then being pushed onto the socket receive queue to indicate terminal events. The preallocation facility added in (6) is now used to set up incoming calls with very little locking required and no calls to the allocator in data_ready. Decryption and verification is now handled in recvmsg() rather than in a background thread. This allows for the future possibility of decrypting directly into the user buffer. With this patch, the code is a lot simpler and most of the mass of call event and state wangling code in call_event.c is gone. With this, the majority of the AF_RXRPC rewrite is complete. However, there are still things to be done, including: (*) Limit the number of active service calls to prevent an attacker from filling up a server's memory. (*) Limit the number of calls on the rebuff-with-BUSY queue. (*) Transmit delayed/deferred ACKs from recvmsg() if possible, rather than punting to the background thread. Ideally, the background thread shouldn't run at all, but data_ready can't call kernel_sendmsg() and we can't rely on recvmsg() attending to the call in a timely fashion. (*) Prevent the call at the front of the socket queue from hogging recvmsg()'s attention if there's a sufficiently continuous supply of data. (*) Distribute ICMP errors by connection rather than by call. Possibly parse the ICMP packet to try and pin down the exact connection and call. (*) Encrypt/decrypt directly between user buffers and socket buffers where possible. (*) IPv6. (*) Service ID upgrade. This is a facility whereby a special flag bit is set in the DATA packet header when making a call that tells the server that it is allowed to change the service ID to an upgraded one and reply with an equivalent call from the upgraded service. This is used, for example, to override certain AFS calls so that IPv6 addresses can be returned. (*) Allow userspace to preallocate call user IDs for incoming calls. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
tdinfo->skb_dma is a 7 element array of dma_addr_t hence cannot be null, so the pull pointer check on tdinfo->skb_dma is redundant. Remove it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Baoyou Xie authored
We get 1 warning when building kernel with W=1: drivers/net/ethernet/qlogic/qede/qede_main.c:2113:5: warning: no previous prototype for 'qede_set_features' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. so this patch marks this function with 'static'. Signed-off-by:
Baoyou Xie <baoyou.xie@linaro.org> Acked-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Raju Lakkaraju authored
The existing VSC85xx PHY driver did not follow the coding style and caused "checkpatch" to complain. This commit fixes this. Signed-off-by:
Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
dtefacs.calling_ae and called_ae are both 20 element __u8 arrays and cannot be null and hence are redundant checks. Remove these. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
The netdevice type structure for macsec was being defined but never used. To set the network device type the macro SET_NETDEV_DEVTYPE must be called. Compile tested only, I don't use macsec. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Acked-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
This structure is defined but never used. Flagged with W=1 Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Guillaume Nault says: ==================== ip: fix creation flags reported in RTM_NEWROUTE events Netlink messages sent to user-space upon RTM_NEWROUTE events have their nlmsg_flags field inconsistently set. While the NLM_F_REPLACE and NLM_F_APPEND bits are correctly handled, NLM_F_CREATE and NLM_F_EXCL are always 0. This series sets the NLM_F_CREATE and NLM_F_EXCL bits when applicable, for IPv4 and IPv6. Since IPv6 ignores the NLM_F_APPEND flags in requests, this flag isn't reported in RTM_NEWROUTE IPv6 events. This keeps IPv6 internal consistency (same flag semantic for user requests and kernel events) at the cost of bringing different flag interpretation for IPv4 and IPv6. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
Since commit 37a1d361 ("ipv6: include NLM_F_REPLACE in route replace notifications"), RTM_NEWROUTE notifications have their NLM_F_REPLACE flag set if the new route replaced a preexisting one. However, other flags aren't set. This patch reports the missing NLM_F_CREATE and NLM_F_EXCL flag bits. NLM_F_APPEND is not reported, because in ipv6 a NLM_F_CREATE request is interpreted as an append request (contrary to ipv4, "prepend" is not supported, so if NLM_F_EXCL is not set then NLM_F_APPEND is implicit). As a result, the possible flag combination can now be reported (iproute2's terminology into parentheses): * NLM_F_CREATE | NLM_F_EXCL: route didn't exist, exclusive creation ("add"). * NLM_F_CREATE: route did already exist, new route added after preexisting ones ("append"). * NLM_F_REPLACE: route did already exist, new route replaced the first preexisting one ("change"). Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
fib_table_insert() inconsistently fills the nlmsg_flags field in its notification messages. Since commit b8f55831 ("[RTNETLINK]: Fix sending netlink message when replace route."), the netlink message has its nlmsg_flags set to NLM_F_REPLACE if the route replaced a preexisting one. Then commit a2bb6d7d ("ipv4: include NLM_F_APPEND flag in append route notifications") started setting nlmsg_flags to NLM_F_APPEND if the route matched a preexisting one but was appended. In other cases (exclusive creation or prepend), nlmsg_flags is 0. This patch sets ->nlmsg_flags in all situations, preserving the semantic of the NLM_F_* bits: * NLM_F_CREATE: a new fib entry has been created for this route. * NLM_F_EXCL: no other fib entry existed for this route. * NLM_F_REPLACE: this route has overwritten a preexisting fib entry. * NLM_F_APPEND: the new fib entry was added after other entries for the same route. As a result, the possible flag combination can now be reported (iproute2's terminology into parentheses): * NLM_F_CREATE | NLM_F_EXCL: route didn't exist, exclusive creation ("add"). * NLM_F_CREATE | NLM_F_APPEND: route did already exist, new route added after preexisting ones ("append"). * NLM_F_CREATE: route did already exist, new route added before preexisting ones ("prepend"). * NLM_F_REPLACE: route did already exist, new route replaced the first preexisting one ("change"). Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Sep 09, 2016
-
-
Eric Dumazet authored
In commit f02db315 ("ipv4: IP_TOS and IP_TTL can be specified as ancillary data") Francesco added IP_TOS values specified as integer. However, kernel sends to userspace (at recvmsg() time) an IP_TOS value in a single byte, when IP_RECVTOS is set on the socket. It can be very useful to reflect all ancillary options as given by the kernel in a subsequent sendmsg(), instead of aborting the sendmsg() with EINVAL after Francesco patch. So this patch extends IP_TOS ancillary to accept an u8, so that an UDP server can simply reuse same ancillary block without having to mangle it. Jesper can then augment https://github.com/netoptimizer/network-testing/blob/master/src/udp_example02.c to add TOS reflection ;) Fixes: f02db315 ("ipv4: IP_TOS and IP_TTL can be specified as ancillary data") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Francesco Fusco <ffusco@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
LLVM can generate code that tests for direct packet access via skb->data/data_end in a way that currently gets rejected by the verifier, example: [...] 7: (61) r3 = *(u32 *)(r6 +80) 8: (61) r9 = *(u32 *)(r6 +76) 9: (bf) r2 = r9 10: (07) r2 += 54 11: (3d) if r3 >= r2 goto pc+12 R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 12: (18) r4 = 0xffffff7a 14: (05) goto pc+430 [...] from 11 to 24: R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 24: (7b) *(u64 *)(r10 -40) = r1 25: (b7) r1 = 0 26: (63) *(u32 *)(r6 +56) = r1 27: (b7) r2 = 40 28: (71) r8 = *(u8 *)(r9 +20) invalid access to packet, off=20 size=1, R9(id=0,off=0,r=0) The reason why this gets rejected despite a proper test is that we currently call find_good_pkt_pointers() only in case where we detect tests like rX > pkt_end, where rX is of type pkt(id=Y,off=Z,r=0) and derived, for example, from a register of type pkt(id=Y,off=0,r=0) pointing to skb->data. find_good_pkt_pointers() then fills the range in the current branch to pkt(id=Y,off=0,r=Z) on success. For above case, we need to extend that to recognize pkt_end >= rX pattern and mark the other branch that is taken on success with the appropriate pkt(id=Y,off=0,r=Z) type via find_good_pkt_pointers(). Since eBPF operates on BPF_JGT (>) and BPF_JGE (>=), these are the only two practical options to test for from what LLVM could have generated, since there's no such thing as BPF_JLT (<) or BPF_JLE (<=) that we would need to take into account as well. After the fix: [...] 7: (61) r3 = *(u32 *)(r6 +80) 8: (61) r9 = *(u32 *)(r6 +76) 9: (bf) r2 = r9 10: (07) r2 += 54 11: (3d) if r3 >= r2 goto pc+12 R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 12: (18) r4 = 0xffffff7a 14: (05) goto pc+430 [...] from 11 to 24: R1=inv R2=pkt(id=0,off=54,r=54) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=54) R10=fp 24: (7b) *(u64 *)(r10 -40) = r1 25: (b7) r1 = 0 26: (63) *(u32 *)(r6 +56) = r1 27: (b7) r2 = 40 28: (71) r8 = *(u8 *)(r9 +20) 29: (bf) r1 = r8 30: (25) if r8 > 0x3c goto pc+47 R1=inv56 R2=imm40 R3=pkt_end R4=inv R6=ctx R8=inv56 R9=pkt(id=0,off=0,r=54) R10=fp 31: (b7) r1 = 1 [...] Verifier test cases are also added in this work, one that demonstrates the mentioned example here and one that tries a bad packet access for the current/fall-through branch (the one with types pkt(id=X,off=Y,r=0), pkt(id=X,off=0,r=0)), then a case with good and bad accesses, and two with both test variants (>, >=). Fixes: 969bf05e ("bpf: direct packet access") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yaogong Wang authored
Over the years, TCP BDP has increased by several orders of magnitude, and some people are considering to reach the 2 Gbytes limit. Even with current window scale limit of 14, ~1 Gbytes maps to ~740,000 MSS. In presence of packet losses (or reorders), TCP stores incoming packets into an out of order queue, and number of skbs sitting there waiting for the missing packets to be received can be in the 10^5 range. Most packets are appended to the tail of this queue, and when packets can finally be transferred to receive queue, we scan the queue from its head. However, in presence of heavy losses, we might have to find an arbitrary point in this queue, involving a linear scan for every incoming packet, throwing away cpu caches. This patch converts it to a RB tree, to get bounded latencies. Yaogong wrote a preliminary patch about 2 years ago. Eric did the rebase, added ofo_last_skb cache, polishing and tests. Tested with network dropping between 1 and 10 % packets, with good success (about 30 % increase of throughput in stress tests) Next step would be to also use an RB tree for the write queue at sender side ;) Signed-off-by:
Yaogong Wang <wygivan@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-By:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Eric Garver says: ==================== openvswitch: add 802.1ad support This series adds 802.1ad support to openvswitch. It is a continuation of the work originally started by Thomas F Herbert - hence the large rev number. The extra VLAN is implemented by using an additional level of the OVS_KEY_ATTR_ENCAP netlink attribute. In OVS flow speak, this looks like eth_type(0x88a8),vlan(vid=100),encap(eth_type(0x8100), vlan(vid=200), encap(eth_type(0x0800), ...)) The userspace counterpart has also seen recent activity on the ovs-dev mailing lists. There are some new 802.1ad OVS tests being added - also on the ovs-dev list. This patch series has been tested using the most recent version of userspace (v3) and tests (v2). v22 changes: - merge patch 4 into patch 3 - fix checkpatch.pl errors - Still some 80 char warnings for long string literals - refresh pointer after pskb_may_pull() - refactor vlan nlattr parsing to remove some double checks - introduce ovs_nla_put_vlan() - move triple VLAN check to after ethertype serialization - WARN_ON_ONCE() on triple VLAN and unexpected encap values v21 changes: - Fix (and simplify) netlink attribute parsing - re-add handling of truncated VLAN tags - fix if/else dangling assignment in {push,pop}_vlan() - simplify parse_vlan() ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Garver authored
Add support for 802.1ad including the ability to push and pop double tagged vlans. Add support for 802.1ad to netlink parsing and flow conversion. Uses double nested encap attributes to represent double tagged vlan. Inner TPID encoded along with ctci in nested attributes. This is based on Thomas F Herbert's original v20 patch. I made some small clean ups and bug fixes. Signed-off-by:
Thomas F Herbert <thomasfherbert@gmail.com> Signed-off-by:
Eric Garver <e@erig.me> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Garver authored
This is to simplify using double tagged vlans. This function allows all valid vlan ethertypes to be checked in a single function call. Also replace some instances that check for both ETH_P_8021Q and ETH_P_8021AD. Patch based on one originally by Thomas F Herbert. Signed-off-by:
Thomas F Herbert <thomasfherbert@gmail.com> Signed-off-by:
Eric Garver <e@erig.me> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Thomas F Herbert authored
openvswitch: Add support for 8021.AD Change the description of the VLAN tpid field. Signed-off-by:
Thomas F Herbert <thomasfherbert@gmail.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lorenzo Colitti authored
This adds the capability for a process that has CAP_NET_ADMIN on a socket to see the socket mark in socket dumps. Commit a52e95ab ("net: diag: allow socket bytecode filters to match socket marks") recently gave privileged processes the ability to filter socket dumps based on mark. This patch is complementary: it ensures that the mark is also passed to userspace in the socket's netlink attributes. It is useful for tools like ss which display information about sockets. Tested: https://android-review.googlesource.com/270210 Signed-off-by:
Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Zubair Lutfullah Kakakhel authored
The MIPS based xilfpga platform uses this driver. Enable it for MIPS Signed-off-by:
Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller authored
Steffen Klassert says: ==================== ipsec-next 2016-09-08 1) Constify the xfrm_replay structures. From Julia Lawall 2) Protect xfrm state hash tables with rcu, lookups can be done now without acquiring xfrm_state_lock. From Florian Westphal. 3) Protect xfrm policy hash tables with rcu, lookups can be done now without acquiring xfrm_policy_lock. From Florian Westphal. 4) We don't need to have a garbage collector list per namespace anymore, so use a global one instead. From Florian Westphal. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Sep 08, 2016
-
-
David Howells authored
Rewrite the data and ack handling code such that: (1) Parsing of received ACK and ABORT packets and the distribution and the filing of DATA packets happens entirely within the data_ready context called from the UDP socket. This allows us to process and discard ACK and ABORT packets much more quickly (they're no longer stashed on a queue for a background thread to process). (2) We avoid calling skb_clone(), pskb_pull() and pskb_trim(). We instead keep track of the offset and length of the content of each packet in the sk_buff metadata. This means we don't do any allocation in the receive path. (3) Jumbo DATA packet parsing is now done in data_ready context. Rather than cloning the packet once for each subpacket and pulling/trimming it, we file the packet multiple times with an annotation for each indicating which subpacket is there. From that we can directly calculate the offset and length. (4) A call's receive queue can be accessed without taking locks (memory barriers do have to be used, though). (5) Incoming calls are set up from preallocated resources and immediately made live. They can than have packets queued upon them and ACKs generated. If insufficient resources exist, DATA packet #1 is given a BUSY reply and other DATA packets are discarded). (6) sk_buffs no longer take a ref on their parent call. To make this work, the following changes are made: (1) Each call's receive buffer is now a circular buffer of sk_buff pointers (rxtx_buffer) rather than a number of sk_buff_heads spread between the call and the socket. This permits each sk_buff to be in the buffer multiple times. The receive buffer is reused for the transmit buffer. (2) A circular buffer of annotations (rxtx_annotations) is kept parallel to the data buffer. Transmission phase annotations indicate whether a buffered packet has been ACK'd or not and whether it needs retransmission. Receive phase annotations indicate whether a slot holds a whole packet or a jumbo subpacket and, if the latter, which subpacket. They also note whether the packet has been decrypted in place. (3) DATA packet window tracking is much simplified. Each phase has just two numbers representing the window (rx_hard_ack/rx_top and tx_hard_ack/tx_top). The hard_ack number is the sequence number before base of the window, representing the last packet the other side says it has consumed. hard_ack starts from 0 and the first packet is sequence number 1. The top number is the sequence number of the highest-numbered packet residing in the buffer. Packets between hard_ack+1 and top are soft-ACK'd to indicate they've been received, but not yet consumed. Four macros, before(), before_eq(), after() and after_eq() are added to compare sequence numbers within the window. This allows for the top of the window to wrap when the hard-ack sequence number gets close to the limit. Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also to indicate when rx_top and tx_top point at the packets with the LAST_PACKET bit set, indicating the end of the phase. (4) Calls are queued on the socket 'receive queue' rather than packets. This means that we don't need have to invent dummy packets to queue to indicate abnormal/terminal states and we don't have to keep metadata packets (such as ABORTs) around (5) The offset and length of a (sub)packet's content are now passed to the verify_packet security op. This is currently expected to decrypt the packet in place and validate it. However, there's now nowhere to store the revised offset and length of the actual data within the decrypted blob (there may be a header and padding to skip) because an sk_buff may represent multiple packets, so a locate_data security op is added to retrieve these details from the sk_buff content when needed. (6) recvmsg() now has to handle jumbo subpackets, where each subpacket is individually secured and needs to be individually decrypted. The code to do this is broken out into rxrpc_recvmsg_data() and shared with the kernel API. It now iterates over the call's receive buffer rather than walking the socket receive queue. Additional changes: (1) The timers are condensed to a single timer that is set for the soonest of three timeouts (delayed ACK generation, DATA retransmission and call lifespan). (2) Transmission of ACK and ABORT packets is effected immediately from process-context socket ops/kernel API calls that cause them instead of them being punted off to a background work item. The data_ready handler still has to defer to the background, though. (3) A shutdown op is added to the AF_RXRPC socket so that the AFS filesystem can shut down the socket and flush its own work items before closing the socket to deal with any in-progress service calls. Future additional changes that will need to be considered: (1) Make sure that a call doesn't hog the front of the queue by receiving data from the network as fast as userspace is consuming it to the exclusion of other calls. (2) Transmit delayed ACKs from within recvmsg() when we've consumed sufficiently more packets to avoid the background work item needing to run. Signed-off-by:
David Howells <dhowells@redhat.com>
-
David Howells authored
Make it possible for the data_ready handler called from the UDP transport socket to completely instantiate an rxrpc_call structure and make it immediately live by preallocating all the memory it might need. The idea is to cut out the background thread usage as much as possible. [Note that the preallocated structs are not actually used in this patch - that will be done in a future patch.] If insufficient resources are available in the preallocation buffers, it will be possible to discard the DATA packet in the data_ready handler or schedule a BUSY packet without the need to schedule an attempt at allocation in a background thread. To this end: (1) Preallocate rxrpc_peer, rxrpc_connection and rxrpc_call structs to a maximum number each of the listen backlog size. The backlog size is limited to a maxmimum of 32. Only this many of each can be in the preallocation buffer. (2) For userspace sockets, the preallocation is charged initially by listen() and will be recharged by accepting or rejecting pending new incoming calls. (3) For kernel services {,re,dis}charging of the preallocation buffers is handled manually. Two notifier callbacks have to be provided before kernel_listen() is invoked: (a) An indication that a new call has been instantiated. This can be used to trigger background recharging. (b) An indication that a call is being discarded. This is used when the socket is being released. A function, rxrpc_kernel_charge_accept() is called by the kernel service to preallocate a single call. It should be passed the user ID to be used for that call and a callback to associate the rxrpc call with the kernel service's side of the ID. (4) Discard the preallocation when the socket is closed. (5) Temporarily bump the refcount on the call allocated in rxrpc_incoming_call() so that rxrpc_release_call() can ditch the preallocation ref on service calls unconditionally. This will no longer be necessary once the preallocation is used. Note that this does not yet control the number of active service calls on a client - that will come in a later patch. A future development would be to provide a setsockopt() call that allows a userspace server to manually charge the preallocation buffer. This would allow user call IDs to be provided in advance and the awkward manual accept stage to be bypassed. Signed-off-by:
David Howells <dhowells@redhat.com>
-