Fix comment typo.

Signed-off-by: Alexander Popov <a13xp0p0v88@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro
is deprecated.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Clients may still be active in the early phase of system PM, thus we
need to move the suspend operations to the late system PM phase.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

A channel can accommodate more than one transaction, each consisting of
multiple descriptors, the last of which has the DCMD_ENDIRQEN bit set.

In order to report the channel's residue, we hence have to walk the
list of running descriptors, look for those which match the cookie,
and then try to find the descriptor which defines upper and lower
boundaries that embrace the current transport pointer. Once it is found,
walk forward until we find the descriptor that tells us about the end of
a transaction via a set DCMD_ENDIRQEN bit.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Make sure to handle register context save/restore when needed from
system PM callbacks.

Previously we solely trusted the device to reside in in-active state
while the system suspend callback were invoked, which is just too
optimistic.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Converting to the PM macros makes us simplify and remove some code.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

While probing, don't rely on CONFIG_PM_RUNTIME to be configured.
Instead, let's power up the device and make it fully operational.
Update the runtime PM status to reflect the active state.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

The runtime PM resume callback needs to be executed while holding the
spinlock, make sure to maintain this for the pause operation as well.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

The commit 4501fe61 "dma: dw: Add suspend and resume handling for PCI mode
DW_DMAC." introduces system power management callbacks. Regarding to commit
f78c4cff

 "PM / Sleep: Add macro to define common late/early system PM
callbacks" we have nice macro to setup dev_pm_ops structure. This patch
converts a driver to use the macro.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

There is no need to use *_noirq version of suspend and resume PM callbacks. The
suspend_late / resume_early suit better (it was discussed in [1]) and in future
could be used for runtime PM support.

[1] http://www.spinics.net/lists/kernel/msg1650974.html

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Fix mpc_dma_probe() error path and mpc_dma_remove(): manually free IRQs and
dispose IRQ mappings before devm_* takes care of other resources.
Moreover replace devm_request_irq() with request_irq() since there is no need
to use it because the original code always frees IRQ manually with
devm_free_irq(). Replace devm_free_irq() with free_irq() accordingly.

Signed-off-by: Alexander Popov <a13xp0p0v88@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

MPC512x and MPC8308 have similar DMA controllers, but are independent SoCs.
DMA controller driver should have separate 'compatible' values for these SoCs.

Signed-off-by: Alexander Popov <a13xp0p0v88@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Concentrate the specific code for MPC8308 in the 'if' branch
and handle MPC512x in the 'else' branch.
This modification only reorders instructions but doesn't change behaviour.

Signed-off-by: Alexander Popov <a13xp0p0v88@gmail.com>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

These functions will be modified in the next patch in the series. By moving the
function in a patch separate from the changes, it will make review easier.

Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com>
Signed-off-by: Qiang Liu <qiang.liu@freescale.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

There are several places where descriptors are freed using identical code.
This patch puts this code into a function to reduce code duplication.

Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com>
Signed-off-by: Qiang Liu <qiang.liu@freescale.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Delete attribute DMA_INTERRUPT because fsldma doesn't support this function,
exception will be thrown if talitos is used to offload xor at the same time.

Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com>
Signed-off-by: Qiang Liu <qiang.liu@freescale.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Methods of accessing DMA controller registers are inconsistent, some registers
are accessed by DMA_IN/OUT directly, while others are accessed by functions
get/set_* which are wrappers of DMA_IN/OUT, and even for the BCR register, it
is read by get_bcr but written by DMA_OUT.
This patch unifies the inconsistent methods, all registers are accessed by
get/set_* now.

Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Some codes are calling chan_dbg with FSL_DMA_LD_DEBUG surrounded, it is really
unnecessary to use such a macro because chan_dbg is a wrapper of dev_dbg, we do
have corresponding DEBUG macro to switch on/off dev_dbg, and most of the other
codes are also calling chan_dbg directly without using FSL_DMA_LD_DEBUG.

Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

This patch add cyclic transfer support and enables dmaengine_prep_dma_cyclic()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[reflown changelog for readablity]
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Current shdma is using "last" which indicates last desc which needs to have
callback function. But that desc's chunks is always 1, we can use it as finder

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[reflown changelog for readablity]
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Use sizeof(*var) instead of sizeof(type) when calling devm_k*alloc().
This avoids using the wrong type as was done to allocate the physical
channels array.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

As the physical channel and virtual channel point to each other,
pchan->phy->vchan is always equal to pchan. Simplify the code
accordingly.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

The property is optional and defaults to 32. Document it as such.

Cc: devicetree@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

edma param struct is now within an edma_pset struct introduced in Thomas
Gleixner's edma tx status series. Update memcpy function for the same.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

The granular residue accounting code uses certain variables specifically
for residue accounting. Document these in the structure declaration.
Also move around some elements and group them together.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

The first slot in the ParamRAM of EDMA holds the current active
subtransfer. Depending on the direction we read either the source or
the destination address from there. In the internal psets we have the
address of the buffer(s).

In the cyclic case we only use the internal pset[0] which holds the
start address of the circular buffer and calculate the remaining room
to the end of the buffer.

In the SG case we read the current address and compare it to the
internal psets address and length.

- If the current address is outside of this range, the pset has been
  processed already and we mark it done, update the residue_stat value
  and process the next set. That avoids that we need to walk all
  processed psets for every invocation of tx_status.

- If its inside the range we know that we look at the current active
  set and stop the walk.

- In case of intermediate transfers we update the stats in the
  interrupt callback function before starting the next batch of
  transfers. The tx_status callback and the interrupt callback are
  serialized via vchan.lock.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[joelf@ti.com: Hunk #2 in original patch manually applied]
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

As Joel pointed out, edma_read_position() uses memcpy_fromio() to read
the parameter ram. That's not synchronized with the internal update as
it does a byte by byte copy. We need to do a 32bit read to get a
consistent value.

Further reading destination and source is pointless. In DEV_TO_MEM
transfers we are only interested in the destination, in MEM_TO_DEV we
care about the source. In MEM_TO_MEM it really does not matter which
one you read.

Simple solution: Remove the pointers, select dest/source via a bool
and return the read value.

Remove the export of this function while at it. The only potential
user is the dmaengine and that's always builtin.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

For granular accounting we need to store the direction and the
information for the individual psets:

- source or destination address, depending on direction
- length

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Preparatory patch to support finer grained accounting.

Move the edma_params array out of edma_desc so we can add further per
pset data to it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[joelf@ti.com: Fixed up hunk #3 in original patch to apply]
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

It's likely that the caller investigates the status of a currently
active descriptor. Make that simple check first and only rumage in the
vchan list if that fails.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

The residue reporting in edma_tx_status() is just broken. It blindly
walks the psets and recalculates the lenght of the transfer from the
hardware parameters. For cyclic transfers it adds the link pset, which
results in interestingly large residues. For non-cyclic it adds the
dummy pset, which is stupid as well.

Aside of that it's silly to walk through the pset params when the per
descriptor residue is known at the point of creating it.

Store the information in edma_desc and use it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

It helps to identify issues if we have some information regarding to the
channel which the event is associated.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

The vchan lock in edma_callback is acquired in hard interrupt context. As
interrupts are already disabled, there's no point in save/restoring interrupt
mask bit or cpsr flags.

Get rid of flags local variable and use spin_lock instead of spin_lock_irqsave.

Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

We add DMA memcpy support to EDMA driver. Successful tests performed using
dmatest kernel module. Copy alignment is set to DMA_SLAVE_BUSWIDTH_4_BYTES and
users must ensure length is aligned so that copy is performed fully.

Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

In case of not supported direction it is better to print the direction also.
It is unlikely, but in such an event it helps with the debugging.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Joel Fernandes <joelf@ti.com>
Reviewed-and-Tested-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

prep_slave_sg and prep_dma_cyclic callbacks have mostly same failure cases
with the same texts printed in case we hit them. It helps when debugging if
we know exactly which callback generated the errors.
At the same time change the debug level for descriptor allocation failure
from dbg to err since all other error cases are dev_err and this failure is
similarly fatal as the other ones.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Joel Fernandes <joelf@ti.com>
Reviewed-and-Tested-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

With the callback implemented omap-dma can provide information to client
drivers regarding to supported address widths, directions, residue
granularity, etc.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Joel Fernandes <joelf@ti.com>
Reviewed-and-Tested-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Do not print the paRAM information when verbose debugging is not asked and
also reduce the number of lines printed in edma_prep_dma_cyclic()

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Joel Fernandes <joelf@ti.com>
Reviewed-and-Tested-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Indicate that the edma dmaengine driver has support for cyclic mode.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Joel Fernandes <joelf@ti.com>
Reviewed-and-Tested-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Pause/Resume can be used by the audio stack when the stream is paused/resumed
The edma platform code has support for this and the legacy audio stack used
this.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Joel Fernandes <joelf@ti.com>
Reviewed-and-Tested-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>