Add pinctrl for sdio, sdmmc, pcie, spdif, hdmi.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Add qos setting reg for some peripheral like sd, usb, pcie.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Firefly-rk3399 is a bord from T-Firefly, you can find detail about
it here:
http://en.t-firefly.com/en/firenow/Firefly_RK3399/



This patch add basic node for the board and make it able to bring
up.

Peripheral works:
- usb hub which connect to ehci controller;
- UART2 debug
- eMMC
- PCIe

Not work:
- USB 3.0 HOST, type-C port
- sdio, sd-card

Not test for other peripheral:
- HDMI
- Ethernet
- OPTICAL
- WiFi/BT
- MIPI CSI/DSI
- IR
- EDP/DP

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

SC9860G is a 8 cores of A53 SoC with 4G LTE support SoC from Spreadtrum.

According to regular hierarchy of sprd dts, whale2.dtsi contains SoC
peripherals IP nodes, sc9860.dtsi contains stuff related to ARM core stuff
and sp9860g dts is for the board level.

Signed-off-by: Orson Zhai <orson.zhai@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add fixed clock of 400MHz to system controller driver.  This clock is
used as SD/eMMC clock source.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-by: Omri Itach <omrii@marvell.com>
Reviewed-by: Hanna Hawa <hannah@marvell.com>
[fixed up conflicts, added error handling --rmk]
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Compiling the DT file with W=1, DTC warns like follows:

Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property

Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.

Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
[k.kozlowski: Split patch per ARM and ARM64]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Compiling the DT file with W=1, DTC warns like follows:

Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property

Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.

Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
[k.kozlowski: Split patch per ARM and ARM64]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

This patch adds the panel device tree node for s6e3hf2 display
controller to TM2e dts.

Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Commit a8d4636f ("arm64: cacheinfo: Remove CCSIDR-based cache
information probing") removed mechanism to extract cache information
based on CCSIDR register as the architecture explicitly states no
inference about the actual sizes of caches based on CCSIDR registers.

Commit 9a802431

 ("arm64: cacheinfo: add support to override cache
levels via device tree") had already provided options to override cache
information from the device tree.

This patch adds the information about L1 and L2 caches on all variants
of Juno platform.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

This patch fixes the following set of warnings on juno.

 smb@08000000 unit name should not have leading 0s
 sysctl@020000 simple-bus unit address format error, expected "20000"
 apbregs@010000 simple-bus unit address format error, expected "10000"
 mmci@050000 simple-bus unit address format error, expected "50000"
 kmi@060000 simple-bus unit address format error, expected "60000"
 kmi@070000 simple-bus unit address format error, expected "70000"
 wdt@0f0000 simple-bus unit address format error, expected "f0000"

Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

This adds the serial slave device for the WL1835 Bluetooth interface.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Enable the cryptographic engine available in the CP110 master on the
Armada 8040 DB. Do not enable the one in the CP110 salve for now, as we
do not support multiple cryptographic engines yet.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Enable the cryptographic engine available in the CP110 master on the
Armada 7040 DB.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Add the description of the crypto engine hardware block for the Marvell
Armada 7k and Armada 8k processors; for both the CP110 slave and master.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Also enable it on the Armada 7040 DB and Armada 8040 DB boards.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Add the eMMC support for Armada 37xx SoC and enable it in the Armada 3720
DB board.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Add pinctrl dtsi file for HiKey960 development board, enable
5 pinmux devices and 1 pinconf device, also include some nodes
of configurations for pins.

Signed-off-by: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Enable the NIC and SAS nodes for the hip07-d05 board
to support related functions.

Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Add 3 SAS host controller nodes and the dependent subctrl node
to enable the SAS and SATA function for the hip07 SoC.

Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Add the infiniband node to support the RoCE function
on the hip07 SoC.

Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Add MDIO, SerDes, Port and realted HNS nodes to support the
network on the hip07 SoC.

Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Add mbigen nodes for the hip07 SoC those will be used
for the SAS, XGE and PCIe host controllers.

Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Commit 122682b2abb6 ("arm64: dts: rockchip: Add PX5 Evaluation board")
sets the memory size to 2 GB, but this board only has 1 GB DRAM, so change
it to the correct value here.

Fixes: 122682b2abb6 ("arm64: dts: rockchip: Add PX5 Evaluation board")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The USB PHY in A64 has a "pmu0" region, which controls the EHCI/OHCI
controller pair that can be connected to the PHY0.

Add the MMIO region for PHY node.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Add basic dts files for hi3798cv200-poplar board. Poplar is the
first development board compliant with the 96Boards Enterprise
Edition TV Platform specification. The board features the
Hi3798CV200 with an integrated quad-core 64-bit ARM Cortex A53
processor and high performance Mali T720 GPU.

Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

The MMC hosts could be left in an unconsistent or uninitialized state from
the firmware. Instead of assuming, the firmware did the right things, let's
reset the host controllers.

This change fixes a bug when the mmc2/sdio is initialized leading to a hung
task:

[  242.704294] INFO: task kworker/7:1:675 blocked for more than 120 seconds.
[  242.711129]       Not tainted 4.9.0-rc8-00017-gcf0251f #3
[  242.716571] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  242.724435] kworker/7:1     D    0   675      2 0x00000000
[  242.729973] Workqueue: events_freezable mmc_rescan
[  242.734796] Call trace:
[  242.737269] [<ffff00000808611c>] __switch_to+0xa8/0xb4
[  242.742437] [<ffff000008d07c04>] __schedule+0x1c0/0x67c
[  242.747689] [<ffff000008d08254>] schedule+0x40/0xa0
[  242.752594] [<ffff000008d0b284>] schedule_timeout+0x1c4/0x35c
[  242.758366] [<ffff000008d08e38>] wait_for_common+0xd0/0x15c
[  242.763964] [<ffff000008d09008>] wait_for_completion+0x28/0x34
[  242.769825] [<ffff000008a1a9f4>] mmc_wait_for_req_done+0x40/0x124
[  242.775949] [<ffff000008a1ab98>] mmc_wait_for_req+0xc0/0xf8
[  242.781549] [<ffff000008a1ac3c>] mmc_wait_for_cmd+0x6c/0x84
[  242.787149] [<ffff000008a26610>] mmc_io_rw_direct_host+0x9c/0x114
[  242.793270] [<ffff000008a26aa0>] sdio_reset+0x34/0x7c
[  242.798347] [<ffff000008a1d46c>] mmc_rescan+0x2fc/0x360

[ ... ]

Cc: stable@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

The current practice is to not add _clk suffixes to clock node names in
DT, as these names are used as the actual clock names.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add HDMI output and connector nodes.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

The HDMI modes needs more CMA memory to be reserved at boot-time.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Now that 3adbf342

 "iio: adc: add a driver for the SAR ADC found in
Amlogic Meson SoCs" has added support for the ADC, let's enable it
on Odroid C2.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

This patch add rk3328-evb.dts for RK3328 evaluation board.
Tested on RK3328 evb.

Signed-off-by: Liang Chen <cl@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This patch adds core dtsi file for Rockchip RK3328 SoCs.

Signed-off-by: Liang Chen <cl@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Allwinner A64 have a dedicated pin controller to manage the PL pin bank.
As the driver and the required clock support are added, add the device
node for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

A64 SoC have a CCU (r_ccu) in PRCM block.

Add the device node for it.

The mux 3 of R_CCU is an internal oscillator, which is 16MHz according
to the user manual, and has only 30% accuracy based on our experience
on older SoCs. The real mesaured value of it on two Pine64 boards is
around 11MHz, which is around 70% of 16MHz.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Update the Tegra132 flowctrl compatible string to include
"nvidia,tegra132-flowctrl" so it is aligned with the flowctrl binding
documentation.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add the DT node for the GP10B GPU on Tegra186.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

dtc recently added PCI bus checks. Fix these warnings.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Move and update device tree files as part of transition from Broadcom
Vulcan to Cavium ThunderX2.

The changes are to:
 * rename dts/broadcom/vulcan.dtsi to cavium/thunder2-99xx.dtsi,
   update cpu cores to be "cavium,thunder2", and update SoC to be
   "cavium,thunderx2-cn9900"
 * move SoC dts/broadcom/vulcan-eval.dtsi to cavium/thunder2-99xx.dtsi
   and update board name string
 * Update dts/broadcom/Makefile not to build vulcan dtbs
 * Update dts/cavium/Makefile to build thunder2 dtbs

No changes to the dts contents except the updated "compatible" and
"model" properties.

Signed-off-by: Jayachandran C <jnair@caviumnetworks.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add ADSP node required for Qualcomm ADSP Peripheral Image Loader.

Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>