- Mar 24, 2023
-
-
Phil Elwell authored
Since [1], writing to the Sense HAT framebuffer and immediately closing the file descriptor is likely to have no effect. This is because the framebuffer deferred IO framework is now careful to cancel pending updates. To retain the old behaviour, add an fb_release method that flushes the updates instead. See: https://github.com/raspberrypi/linux/issues/5398 Signed-off-by: Phil Elwell <phil@raspberrypi.com> [1] 3efc61d9 ("fbdev: Fix invalid page access after closing deferred I/O devices")
-
Dom Cobley authored
-
- Mar 23, 2023
-
-
David Plowman authored
Setting V4L2_CID_WIDE_DYNAMIC_RANGE was causing the long exposure shift count to be reset, which is incorrect if the user has already changed the frame length to cause it to have a non-zero value. Because it only updates control ranges and doesn't set any registers, the control can also be applied when the sensor is not powered on. Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
-
- Mar 22, 2023
-
-
Lee Jackson authored
Modify the link-frequencies of IMX519 to 408000000. Signed-off-by: Lee Jackson <lee.jackson@arducam.com>
-
Lee Jackson authored
Add PDAF support for IMX519, and reduce the pixel rate to 426666667, link freq to 408000000. Signed-off-by: Lee Jackson <lee.jackson@arducam.com>
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20230320145507.420176832@linuxfoundation.org Tested-by: Chris Paterson (CIP) <chris.paterson2@renesas.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20230321080705.245176209@linuxfoundation.org Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com> Tested-by: Rudi Heitbaum <rudi@heitbaum.com> Tested-by: Markus Reichelt <lkt+2023@mareichelt.com> Tested-by: Slade Watkins <srw@sladewatkins.net> Link: https://lore.kernel.org/r/20230321180747.474321236@linuxfoundation.org Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Tested-by: Chris Paterson (CIP) <chris.paterson2@renesas.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christophe Leroy authored
commit 77e82fa1 upstream. E500MC64 is a processor pre-dating E5500 that has never been commercialised. Use -mcpu=e5500 for E5500 core. More details at https://gcc.gnu.org/PR108149 Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/fa71ed20d22c156225436374f0ab847daac893bc.1671475543.git.christophe.leroy@csgroup.eu Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christophe Leroy authored
commit 4b10306e upstream. CLANG only knows the following CPUs: generic, 440, 450, 601, 602, 603, 603e, 603ev, 604, 604e, 620, 630, g3, 7400, g4, 7450, g4+, 750, 8548, 970, g5, a2, e500, e500mc, e5500, power3, pwr3, power4, pwr4, power5, pwr5, power5x, pwr5x, power6, pwr6, power6x, pwr6x, power7, pwr7, power8, pwr8, power9, pwr9, power10, pwr10, powerpc, ppc, ppc32, powerpc64, ppc64, powerpc64le, ppc64le, futur Disable other ones when CC_IS_CLANG. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/e62892e32c14a7a5738c597e39e0082cb0abf21c.1675335659.git.christophe.leroy@csgroup.eu Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Budimir Markovic authored
commit fd0815f6 upstream. Events should only be added to a groups rb tree if they have not been removed from their context by list_del_event(). Since remove_on_exec made it possible to call list_del_event() on individual events before they are detached from their group, perf_group_detach() should check each sibling's attach_state before calling add_event_to_groups() on it. Fixes: 2e498d0a ("perf: Add support for event removal on exec") Signed-off-by: Budimir Markovic <markovicbudimir@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/ZBFzvQV9tEqoHEtH@gentoo Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pavel Begunkov authored
commit 5da28edd upstream. msg_ring requests transferring files support auto index selection via IORING_FILE_INDEX_ALLOC, however they don't return the selected index to the target ring and there is no other good way for the userspace to know where is the receieved file. Return the index for allocated slots and 0 otherwise, which is consistent with other fixed file installing requests. Cc: stable@vger.kernel.org # v6.0+ Fixes: e6130eba ("io_uring: add support for passing fixed file descriptors") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://github.com/axboe/liburing/issues/809 Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dionna Glaze authored
commit 72f7754d upstream. A potentially malicious SEV guest can constantly hammer the hypervisor using this driver to send down requests and thus prevent or at least considerably hinder other guests from issuing requests to the secure processor which is a shared platform resource. Therefore, the host is permitted and encouraged to throttle such guest requests. Add the capability to handle the case when the hypervisor throttles excessive numbers of requests issued by the guest. Otherwise, the VM platform communication key will be disabled, preventing the guest from attesting itself. Realistically speaking, a well-behaved guest should not even care about throttling. During its lifetime, it would end up issuing a handful of requests which the hardware can easily handle. This is more to address the case of a malicious guest. Such guest should get throttled and if its VMPCK gets disabled, then that's its own wrongdoing and perhaps that guest even deserves it. To the implementation: the hypervisor signals with SNP_GUEST_REQ_ERR_BUSY that the guest requests should be throttled. That error code is returned in the upper 32-bit half of exitinfo2 and this is part of the GHCB spec v2. So the guest is given a throttling period of 1 minute in which it retries the request every 2 seconds. This is a good default but if it turns out to not pan out in practice, it can be tweaked later. For safety, since the encryption algorithm in GHCBv2 is AES_GCM, control must remain in the kernel to complete the request with the current sequence number. Returning without finishing the request allows the guest to make another request but with different message contents. This is IV reuse, and breaks cryptographic protections. [ bp: - Rewrite commit message and do a simplified version. - The stable tags are supposed to denote that a cleanup should go upfront before backporting this so that any future fixes to this can preserve the sanity of the backporter(s). ] Fixes: d5af44dd ("x86/sev: Provide support for SNP guest request NAEs") Signed-off-by: Dionna Glaze <dionnaglaze@google.com> Co-developed-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: <stable@kernel.org> # d6fd48ef ("virt/coco/sev-guest: Check SEV_SNP attribute at probe time") Cc: <stable@kernel.org> # 970ab823 (" virt/coco/sev-guest: Simplify extended guest request handling") Cc: <stable@kernel.org> # c5a33827 ("virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request()") Cc: <stable@kernel.org> # 0fdb6cc7 ("virt/coco/sev-guest: Carve out the request issuing logic into a helper") Cc: <stable@kernel.org> # d25bae7d ("virt/coco/sev-guest: Do some code style cleanups") Cc: <stable@kernel.org> # fa4ae42c ("virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case") Link: https://lore.kernel.org/r/20230214164638.1189804-2-dionnaglaze@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Borislav Petkov (AMD) authored
commit fa4ae42c upstream. snp_issue_guest_request() checks the value returned by the hypervisor in sw_exit_info_2 and returns a different error depending on it. Convert those checks into a switch-case to make it more readable when more error values are going to be checked in the future. No functional changes. Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20230307192449.24732-8-bp@alien8.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Borislav Petkov (AMD) authored
commit d25bae7d upstream. Remove unnecessary linebreaks, make the code more compact. No functional changes. Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20230307192449.24732-7-bp@alien8.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Borislav Petkov (AMD) authored
commit 0fdb6cc7 upstream. This makes the code flow a lot easier to follow. No functional changes. [ Tom: touchups. ] Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230307192449.24732-6-bp@alien8.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Borislav Petkov (AMD) authored
commit c5a33827 upstream. Call the function directly instead. No functional changes. Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20230307192449.24732-5-bp@alien8.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Borislav Petkov (AMD) authored
commit 970ab823 upstream. Return a specific error code - -ENOSPC - to signal the too small cert data buffer instead of checking exit code and exitinfo2. While at it, hoist the *fw_err assignment in snp_issue_guest_request() so that a proper error value is returned to the callers. [ Tom: check override_err instead of err. ] Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230307192449.24732-4-bp@alien8.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Borislav Petkov (AMD) authored
commit d6fd48ef upstream. No need to check it on every ioctl. And yes, this is a common SEV driver but it does only SNP-specific operations currently. This can be revisited later, when more use cases appear. No functional changes. Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20230307192449.24732-3-bp@alien8.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christophe Leroy authored
commit bfb03af7 upstream. Jan-Benedict reported issue with building ppc64e_defconfig with mainline GCC work: powerpc64-linux-gcc -Wp,-MMD,arch/powerpc/kernel/vdso/.gettimeofday-64.o.d -nostdinc -I./arch/powerpc/include -I./arch/powerpc/include/generated -I./include -I./arch/powerpc/include/uapi -I./arch/powerpc/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/compiler-version.h -include ./include/linux/kconfig.h -D__KERNEL__ -I ./arch/powerpc -DHAVE_AS_ATHIGH=1 -fmacro-prefix-map=./= -D__ASSEMBLY__ -fno-PIE -m64 -Wl,-a64 -mabi=elfv1 -Wa,-me500 -Wa,-me500mc -mabi=elfv1 -mbig-endian -Wl,-soname=linux-vdso64.so.1 -D__VDSO64__ -s -c -o arch/powerpc/kernel/vdso/gettimeofday-64.o arch/powerpc/kernel/vdso/gettimeofday.S arch/powerpc/kernel/vdso/gettimeofday.S: Assembler messages: arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `stdu' arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `stdu' arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `std' arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `std' arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `ld' arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `ld' ... make[1]: *** [arch/powerpc/kernel/vdso/Makefile:76: arch/powerpc/kernel/vdso/gettimeofday-64.o] Error 1 make: *** [arch/powerpc/Makefile:387: vdso_prepare] Error 2 This is due to assembler being called with -me500mc which is a 32 bits target. The problem comes from the fact that CONFIG_PPC_E500MC is selected for both the e500mc (32 bits) and the e5500 (64 bits), and therefore the following makefile rule is wrong: cpu-as-$(CONFIG_PPC_E500MC) += $(call as-option,-Wa$(comma)-me500mc) Today we have CONFIG_TARGET_CPU which provides the identification of the expected CPU, it is used for GCC. Once GCC knows the target CPU, it adds the correct CPU option to assembler, no need to add it explicitly. With that change (And also commit 45f7091a ("powerpc/64: Set default CPU in Kconfig")), it now is: powerpc64-linux-gcc -Wp,-MMD,arch/powerpc/kernel/vdso/.gettimeofday-64.o.d -nostdinc -I./arch/powerpc/include -I./arch/powerpc/include/generated -I./include -I./arch/powerpc/include/uapi -I./arch/powerpc/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/compiler-version.h -include ./include/linux/kconfig.h -D__KERNEL__ -I ./arch/powerpc -DHAVE_AS_ATHIGH=1 -fmacro-prefix-map=./= -D__ASSEMBLY__ -fno-PIE -m64 -Wl,-a64 -mabi=elfv1 -mcpu=e500mc64 -mabi=elfv1 -mbig-endian -Wl,-soname=linux-vdso64.so.1 -D__VDSO64__ -s -c -o arch/powerpc/kernel/vdso/gettimeofday-64.o arch/powerpc/kernel/vdso/gettimeofday.S Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Pali Rohár <pali@kernel.org> [mpe: Retain -Wa,-mpower4 -Wa,-many for Book3S 64 builds for now] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/758ad54128fa9dd2fdedc4c511592111cbded900.1671475543.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shawn Wang authored
commit 0424a7df upstream. As a temporary storage, staged_config[] in rdt_domain should be cleared before and after it is used. The stale value in staged_config[] could cause an MSR access error. Here is a reproducer on a system with 16 usable CLOSIDs for a 15-way L3 Cache (MBA should be disabled if the number of CLOSIDs for MB is less than 16.) : mount -t resctrl resctrl -o cdp /sys/fs/resctrl mkdir /sys/fs/resctrl/p{1..7} umount /sys/fs/resctrl/ mount -t resctrl resctrl /sys/fs/resctrl mkdir /sys/fs/resctrl/p{1..8} An error occurs when creating resource group named p8: unchecked MSR access error: WRMSR to 0xca0 (tried to write 0x00000000000007ff) at rIP: 0xffffffff82249142 (cat_wrmsr+0x32/0x60) Call Trace: <IRQ> __flush_smp_call_function_queue+0x11d/0x170 __sysvec_call_function+0x24/0xd0 sysvec_call_function+0x89/0xc0 </IRQ> <TASK> asm_sysvec_call_function+0x16/0x20 When creating a new resource control group, hardware will be configured by the following process: rdtgroup_mkdir() rdtgroup_mkdir_ctrl_mon() rdtgroup_init_alloc() resctrl_arch_update_domains() resctrl_arch_update_domains() iterates and updates all resctrl_conf_type whose have_new_ctrl is true. Since staged_config[] holds the same values as when CDP was enabled, it will continue to update the CDP_CODE and CDP_DATA configurations. When group p8 is created, get_config_index() called in resctrl_arch_update_domains() will return 16 and 17 as the CLOSIDs for CDP_CODE and CDP_DATA, which will be translated to an invalid register - 0xca0 in this scenario. Fix it by clearing staged_config[] before and after it is used. [reinette: re-order commit tags] Fixes: 75408e43 ("x86/resctrl: Allow different CODE/DATA configurations to be staged") Suggested-by: Xin Hao <xhao@linux.alibaba.com> Signed-off-by: Shawn Wang <shawnwang@linux.alibaba.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Tested-by: Reinette Chatre <reinette.chatre@intel.com> Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/2fad13f49fbe89687fc40e9a5a61f23a28d1507a.1673988935.git.reinette.chatre%40intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nikita Zhandarovich authored
commit cbebd68f upstream. cmdline_find_option() may fail before doing any initialization of the buffer array. This may lead to unpredictable results when the same buffer is used later in calls to strncmp() function. Fix the issue by returning early if cmdline_find_option() returns an error. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: aca20d54 ("x86/mm: Add support to make use of Secure Memory Encryption") Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/20230306160656.14844-1-n.zhandarovich@fintech.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yazen Ghannam authored
commit 4783b9cb upstream. A recent change introduced a flag to queue up errors found during boot-time polling. These errors will be processed during late init once the MCE subsystem is fully set up. A number of sysfs updates call mce_restart() which goes through a subset of the CPU init flow. This includes polling MCA banks and logging any errors found. Since the same function is used as boot-time polling, errors will be queued. However, the system is now past late init, so the errors will remain queued until another error is found and the workqueue is triggered. Call mce_schedule_work() at the end of mce_restart() so that queued errors are processed. Fixes: 3bff147b ("x86/mce: Defer processing of early errors") Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230301221420.2203184-1-yazen.ghannam@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Krzysztof Kozlowski authored
commit 65882134 upstream. The second to last argument is clk_root (root of the clock), however the code called q6prm_request_lpass_clock() with clk_attr instead (copy-paste error). This effectively was passing value of 1 as root clock which worked on some of the SoCs (e.g. SM8450) but fails on others, depending on the ADSP. For example on SM8550 this "1" as root clock is not accepted and results in errors coming from ADSP. Fixes: 2f206404 ("ASoC: qdsp6: qdsp6: q6prm: handle clk disable correctly") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230302122908.221398-1-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pierre-Louis Bossart authored
commit 858a438a upstream. For some reason the convention for topology names was not followed and the name inspired by another unrelated hardware configuration. As a result, the kernel will request a non-existent topology file. Link: https://github.com/thesofproject/sof/pull/6878 Fixes: 2ec8b081 ("ASoC: Intel: soc-acpi: Add entry for sof_es8336 in ADL match table") Cc: stable@vger.kernel.org Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230307100733.15025-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shawn Guo authored
commit 6b0313c2 upstream. In case that psci_pd_init_topology() fails for some reason, psci_pd_remove() will be responsible for deleting provider and removing genpd from psci_pd_providers list. There will be a failure when removing the cluster PD, because the cpu (child) PDs haven't been removed. [ 0.050232] CPUidle PSCI: init PM domain cpu0 [ 0.050278] CPUidle PSCI: init PM domain cpu1 [ 0.050329] CPUidle PSCI: init PM domain cpu2 [ 0.050370] CPUidle PSCI: init PM domain cpu3 [ 0.050422] CPUidle PSCI: init PM domain cpu-cluster0 [ 0.050475] PM: genpd_remove: unable to remove cpu-cluster0 [ 0.051412] PM: genpd_remove: removed cpu3 [ 0.051449] PM: genpd_remove: removed cpu2 [ 0.051499] PM: genpd_remove: removed cpu1 [ 0.051546] PM: genpd_remove: removed cpu0 Fix the problem by iterating the provider list reversely, so that parent PD gets removed after child's PDs like below. [ 0.029052] CPUidle PSCI: init PM domain cpu0 [ 0.029076] CPUidle PSCI: init PM domain cpu1 [ 0.029103] CPUidle PSCI: init PM domain cpu2 [ 0.029124] CPUidle PSCI: init PM domain cpu3 [ 0.029151] CPUidle PSCI: init PM domain cpu-cluster0 [ 0.029647] PM: genpd_remove: removed cpu0 [ 0.029666] PM: genpd_remove: removed cpu1 [ 0.029690] PM: genpd_remove: removed cpu2 [ 0.029714] PM: genpd_remove: removed cpu3 [ 0.029738] PM: genpd_remove: removed cpu-cluster0 Fixes: a65a397f ("cpuidle: psci: Add support for PM domains by using genpd") Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: 5.10+ <stable@vger.kernel.org> # 5.10+ Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit fe9ae05c upstream. The recent fix for the deferred I/O by the commit 3efc61d9 ("fbdev: Fix invalid page access after closing deferred I/O devices") caused a regression when the same fb device is opened/closed while it's being used. It resulted in a frozen screen even if something is redrawn there after the close. The breakage is because the patch was made under a wrong assumption of a single open; in the current code, fb_deferred_io_release() cleans up the page mapping of the pageref list and it calls cancel_delayed_work_sync() unconditionally, where both are no correct behavior for multiple opens. This patch adds a refcount for the opens of the device, and applies the cleanup only when all files get closed. As both fb_deferred_io_open() and _close() are called always in the fb_info lock (mutex), it's safe to use the normal int for the refcounting. Also, a useless BUG_ON() is dropped. Fixes: 3efc61d9 ("fbdev: Fix invalid page access after closing deferred I/O devices") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230308105012.1845-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Radu Pirea (OSS) authored
commit 8ba57205 upstream. According to the TJA1103 user manual, the bit for the reversed role in MII or RMII modes is bit 4. Cc: <stable@vger.kernel.org> # 5.15+ Fixes: b050f2f1 ("phy: nxp-c45: add driver for tja1103") Signed-off-by: Radu Pirea (OSS) <radu-nicolae.pirea@oss.nxp.com> Link: https://lore.kernel.org/r/20230309100111.1246214-1-radu-nicolae.pirea@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sudeep Holla authored
commit 91d7b60a upstream. Commit 0c80f9e1 ("ACPI: PPTT: Leave the table mapped for the runtime usage") enabled to map PPTT once on the first invocation of acpi_get_pptt() and never unmapped the same allowing it to be used at runtime with out the hassle of mapping and unmapping the table. This was needed to fetch LLC information from the PPTT in the cpuhotplug path which is executed in the atomic context as the acpi_get_table() might sleep waiting for a mutex. However it missed to handle the case when there is no PPTT on the system which results in acpi_get_pptt() being called from all the secondary CPUs attempting to fetch the LLC information in the atomic context without knowing the absence of PPTT resulting in the splat like below: | BUG: sleeping function called from invalid context at kernel/locking/semaphore.c:164 | in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1 | preempt_count: 1, expected: 0 | RCU nest depth: 0, expected: 0 | no locks held by swapper/1/0. | irq event stamp: 0 | hardirqs last enabled at (0): 0x0 | hardirqs last disabled at (0): copy_process+0x61c/0x1b40 | softirqs last enabled at (0): copy_process+0x61c/0x1b40 | softirqs last disabled at (0): 0x0 | CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.3.0-rc1 #1 | Call trace: | dump_backtrace+0xac/0x138 | show_stack+0x30/0x48 | dump_stack_lvl+0x60/0xb0 | dump_stack+0x18/0x28 | __might_resched+0x160/0x270 | __might_sleep+0x58/0xb0 | down_timeout+0x34/0x98 | acpi_os_wait_semaphore+0x7c/0xc0 | acpi_ut_acquire_mutex+0x58/0x108 | acpi_get_table+0x40/0xe8 | acpi_get_pptt+0x48/0xa0 | acpi_get_cache_info+0x38/0x140 | init_cache_level+0xf4/0x118 | detect_cache_attributes+0x2e4/0x640 | update_siblings_masks+0x3c/0x330 | store_cpu_topology+0x88/0xf0 | secondary_start_kernel+0xd0/0x168 | __secondary_switched+0xb8/0xc0 Update acpi_get_pptt() to consider the fact that PPTT is once checked and is not available on the system and return NULL avoiding any attempts to fetch PPTT and thereby avoiding any possible sleep waiting for a mutex in the atomic context. Fixes: 0c80f9e1 ("ACPI: PPTT: Leave the table mapped for the runtime usage") Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Pierre Gondois <pierre.gondois@arm.com> Cc: 6.0+ <stable@vger.kernel.org> # 6.0+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tero Kristo authored
commit 08697bca upstream. The hwlatd tracer will end up starting multiple per-cpu threads with the following script: #!/bin/sh cd /sys/kernel/debug/tracing echo 0 > tracing_on echo hwlat > current_tracer echo per-cpu > hwlat_detector/mode echo 100000 > hwlat_detector/width echo 200000 > hwlat_detector/window echo 1 > tracing_on To fix the issue, check if the hwlatd thread for the cpu is already running, before starting a new one. Along with the previous patch, this avoids running multiple instances of the same CPU thread on the system. Link: https://lore.kernel.org/all/20230302113654.2984709-1-tero.kristo@linux.intel.com/ Link: https://lkml.kernel.org/r/20230310100451.3948583-3-tero.kristo@linux.intel.com Cc: stable@vger.kernel.org Fixes: f46b1652 ("trace/hwlat: Implement the per-cpu mode") Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com> Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tero Kristo authored
commit 4c42f5f0 upstream. Do not wipe the contents of the per-cpu kthread data when starting the tracer, as this will completely forget about already running instances and can later start new additional per-cpu threads. Link: https://lore.kernel.org/all/20230302113654.2984709-1-tero.kristo@linux.intel.com/ Link: https://lkml.kernel.org/r/20230310100451.3948583-2-tero.kristo@linux.intel.com Cc: stable@vger.kernel.org Fixes: f46b1652 ("trace/hwlat: Implement the per-cpu mode") Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com> Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit 203873a5 upstream. Find a valid modeline depending on the machine graphic card configuration and add the fb_check_var() function to validate Xorg provided graphics settings. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Francesco Dolcini authored
commit 11440da7 upstream. Lower the power-on failed message severity from warn to info when the controller does not power-up. It's normal to have this situation when the SD card slot is empty, therefore we should not warn the user about it. Fixes: 7ca0f166 ("mmc: sdhci_am654: Add workaround for card detect debounce timer") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230306162751.163369-1-francesco@dolcini.it Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pali Rohár authored
commit ff7c76f6 upstream. When CONFIG_TARGET_CPU is specified then pass its value to the compiler -mcpu option. This fixes following build error when building kernel with powerpc e500 SPE capable cross compilers: BOOTAS arch/powerpc/boot/crt0.o powerpc-linux-gnuspe-gcc: error: unrecognized argument in option ‘-mcpu=powerpc’ powerpc-linux-gnuspe-gcc: note: valid arguments to ‘-mcpu=’ are: 8540 8548 native make[1]: *** [arch/powerpc/boot/Makefile:231: arch/powerpc/boot/crt0.o] Error 1 Similar change was already introduced for the main powerpc Makefile in commit 446cda1b ("powerpc/32: Don't always pass -mcpu=powerpc to the compiler"). Fixes: 40a75584 ("powerpc/boot: Build wrapper for an appropriate CPU") Cc: stable@vger.kernel.org # v5.19+ Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/2ae3ae5887babfdacc34435bff0944b3f336100a.1674632329.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christophe Leroy authored
commit 45f7091a upstream. Since commit 0069f3d1 ("powerpc/64e: Tie PPC_BOOK3E_64 to PPC_E500MC"), the only possible BOOK3E/64 are E500, so no need of a default CPU over the E5500. When the user selects book3e, they must have an e500 compatible compiler, and it won't work anymore with the default -mcpu=power64, see commit d6b551b8 ("powerpc/64e: Fix build failure with GCC 12 (unrecognized opcode: `wrteei')"). For book3s/64, replace GENERIC_CPU by POWERPC64_CPU to match the PPC32 POWERPC_CPU, and set a default mpcu value in Kconfig directly. When a user selects a particular CPU, they must ensure the compiler has the requested capability. Therefore, remove hidden fallback, instead offer user the possibility to say they want to use the toolchain default. Fixes: d6b551b8 ("powerpc/64e: Fix build failure with GCC 12 (unrecognized opcode: `wrteei')") Reported-by: Pali Rohár <pali@kernel.org> Tested-by: Pali Rohár <pali@kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/76c11197b058193dcb8e8b26adffba09cfbdab11.1674632329.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
James Houghton authored
commit 63cf5842 upstream. By checking huge_pte_none(), we incorrectly classify PTE markers as "present". Instead, check huge_pte_none_mostly(), classifying PTE markers the same as if the PTE were completely blank. PTE markers, unlike other kinds of swap entries, don't reference any physical page and don't indicate that a physical page was mapped previously. As such, treat them as non-present for the sake of mincore(). Link: https://lkml.kernel.org/r/20230302222404.175303-1-jthoughton@google.com Fixes: 5c041f5d ("mm: teach core mm about pte markers") Signed-off-by: James Houghton <jthoughton@google.com> Acked-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: James Houghton <jthoughton@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Hildenbrand authored
commit 42b2af2c upstream. Currently, we'd lose the userfaultfd-wp marker when PTE-mapping a huge zeropage, resulting in the next write faults in the PMD range not triggering uffd-wp events. Various actions (partial MADV_DONTNEED, partial mremap, partial munmap, partial mprotect) could trigger this. However, most importantly, un-protecting a single sub-page from the userfaultfd-wp handler when processing a uffd-wp event will PTE-map the shared huge zeropage and lose the uffd-wp bit for the remainder of the PMD. Let's properly propagate the uffd-wp bit to the PMDs. #define _GNU_SOURCE #include <stdio.h> #include <stdlib.h> #include <stdint.h> #include <stdbool.h> #include <inttypes.h> #include <fcntl.h> #include <unistd.h> #include <errno.h> #include <poll.h> #include <pthread.h> #include <sys/mman.h> #include <sys/syscall.h> #include <sys/ioctl.h> #include <linux/userfaultfd.h> static size_t pagesize; static int uffd; static volatile bool uffd_triggered; #define barrier() __asm__ __volatile__("": : :"memory") static void uffd_wp_range(char *start, size_t size, bool wp) { struct uffdio_writeprotect uffd_writeprotect; uffd_writeprotect.range.start = (unsigned long) start; uffd_writeprotect.range.len = size; if (wp) { uffd_writeprotect.mode = UFFDIO_WRITEPROTECT_MODE_WP; } else { uffd_writeprotect.mode = 0; } if (ioctl(uffd, UFFDIO_WRITEPROTECT, &uffd_writeprotect)) { fprintf(stderr, "UFFDIO_WRITEPROTECT failed: %d\n", errno); exit(1); } } static void *uffd_thread_fn(void *arg) { static struct uffd_msg msg; ssize_t nread; while (1) { struct pollfd pollfd; int nready; pollfd.fd = uffd; pollfd.events = POLLIN; nready = poll(&pollfd, 1, -1); if (nready == -1) { fprintf(stderr, "poll() failed: %d\n", errno); exit(1); } nread = read(uffd, &msg, sizeof(msg)); if (nread <= 0) continue; if (msg.event != UFFD_EVENT_PAGEFAULT || !(msg.arg.pagefault.flags & UFFD_PAGEFAULT_FLAG_WP)) { printf("FAIL: wrong uffd-wp event fired\n"); exit(1); } /* un-protect the single page. */ uffd_triggered = true; uffd_wp_range((char *)(uintptr_t)msg.arg.pagefault.address, pagesize, false); } return arg; } static int setup_uffd(char *map, size_t size) { struct uffdio_api uffdio_api; struct uffdio_register uffdio_register; pthread_t thread; uffd = syscall(__NR_userfaultfd, O_CLOEXEC | O_NONBLOCK | UFFD_USER_MODE_ONLY); if (uffd < 0) { fprintf(stderr, "syscall() failed: %d\n", errno); return -errno; } uffdio_api.api = UFFD_API; uffdio_api.features = UFFD_FEATURE_PAGEFAULT_FLAG_WP; if (ioctl(uffd, UFFDIO_API, &uffdio_api) < 0) { fprintf(stderr, "UFFDIO_API failed: %d\n", errno); return -errno; } if (!(uffdio_api.features & UFFD_FEATURE_PAGEFAULT_FLAG_WP)) { fprintf(stderr, "UFFD_FEATURE_WRITEPROTECT missing\n"); return -ENOSYS; } uffdio_register.range.start = (unsigned long) map; uffdio_register.range.len = size; uffdio_register.mode = UFFDIO_REGISTER_MODE_WP; if (ioctl(uffd, UFFDIO_REGISTER, &uffdio_register) < 0) { fprintf(stderr, "UFFDIO_REGISTER failed: %d\n", errno); return -errno; } pthread_create(&thread, NULL, uffd_thread_fn, NULL); return 0; } int main(void) { const size_t size = 4 * 1024 * 1024ull; char *map, *cur; pagesize = getpagesize(); map = mmap(NULL, size, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANON, -1, 0); if (map == MAP_FAILED) { fprintf(stderr, "mmap() failed\n"); return -errno; } if (madvise(map, size, MADV_HUGEPAGE)) { fprintf(stderr, "MADV_HUGEPAGE failed\n"); return -errno; } if (setup_uffd(map, size)) return 1; /* Read the whole range, populating zeropages. */ madvise(map, size, MADV_POPULATE_READ); /* Write-protect the whole range. */ uffd_wp_range(map, size, true); /* Make sure uffd-wp triggers on each page. */ for (cur = map; cur < map + size; cur += pagesize) { uffd_triggered = false; barrier(); /* Trigger a write fault. */ *cur = 1; barrier(); if (!uffd_triggered) { printf("FAIL: uffd-wp did not trigger\n"); return 1; } } printf("PASS: uffd-wp triggered\n"); return 0; } Link: https://lkml.kernel.org/r/20230302175423.589164-1-david@redhat.com Fixes: e06f1e1d ("userfaultfd: wp: enabled write protection in userfaultfd API") Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Cindy Lu authored
commit aed8efdd upstream. While unplugging the vp_vdpa device, it triggers a kernel panic The root cause is: vdpa_mgmtdev_unregister() will accesses modern devices which will cause a use after free. So need to change the sequence in vp_vdpa_remove [ 195.003359] BUG: unable to handle page fault for address: ff4e8beb80199014 [ 195.004012] #PF: supervisor read access in kernel mode [ 195.004486] #PF: error_code(0x0000) - not-present page [ 195.004960] PGD 100000067 P4D 1001b6067 PUD 1001b7067 PMD 1001b8067 PTE 0 [ 195.005578] Oops: 0000 1 PREEMPT SMP PTI [ 195.005968] CPU: 13 PID: 164 Comm: kworker/u56:10 Kdump: loaded Not tainted 5.14.0-252.el9.x86_64 #1 [ 195.006792] Hardware name: Red Hat KVM/RHEL, BIOS edk2-20221207gitfff6d81270b5-2.el9 unknown [ 195.007556] Workqueue: kacpi_hotplug acpi_hotplug_work_fn [ 195.008059] RIP: 0010:ioread8+0x31/0x80 [ 195.008418] Code: 77 28 48 81 ff 00 00 01 00 76 0b 89 fa ec 0f b6 c0 c3 cc cc cc cc 8b 15 ad 72 93 01 b8 ff 00 00 00 85 d2 75 0f c3 cc cc cc cc <8a> 07 0f b6 c0 c3 cc cc cc cc 83 ea 01 48 83 ec 08 48 89 fe 48 c7 [ 195.010104] RSP: 0018:ff4e8beb8067bab8 EFLAGS: 00010292 [ 195.010584] RAX: ffffffffc05834a0 RBX: ffffffffc05843c0 RCX: ff4e8beb8067bae0 [ 195.011233] RDX: ff1bcbd580f88000 RSI: 0000000000000246 RDI: ff4e8beb80199014 [ 195.011881] RBP: ff1bcbd587e39000 R08: ffffffff916fa2d0 R09: ff4e8beb8067ba68 [ 195.012527] R10: 000000000000001c R11: 0000000000000000 R12: ff1bcbd5a3de9120 [ 195.013179] R13: ffffffffc062d000 R14: 0000000000000080 R15: ff1bcbe402bc7805 [ 195.013826] FS: 0000000000000000(0000) GS:ff1bcbe402740000(0000) knlGS:0000000000000000 [ 195.014564] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 195.015093] CR2: ff4e8beb80199014 CR3: 0000000107dea002 CR4: 0000000000771ee0 [ 195.015741] PKRU: 55555554 [ 195.016001] Call Trace: [ 195.016233] <TASK> [ 195.016434] vp_modern_get_status+0x12/0x20 [ 195.016823] vp_vdpa_reset+0x1b/0x50 [vp_vdpa] [ 195.017238] virtio_vdpa_reset+0x3c/0x48 [virtio_vdpa] [ 195.017709] remove_vq_common+0x1f/0x3a0 [virtio_net] [ 195.018178] virtnet_remove+0x5d/0x70 [virtio_net] [ 195.018618] virtio_dev_remove+0x3d/0x90 [ 195.018986] device_release_driver_internal+0x1aa/0x230 [ 195.019466] bus_remove_device+0xd8/0x150 [ 195.019841] device_del+0x18b/0x3f0 [ 195.020167] ? kernfs_find_ns+0x35/0xd0 [ 195.020526] device_unregister+0x13/0x60 [ 195.020894] unregister_virtio_device+0x11/0x20 [ 195.021311] device_release_driver_internal+0x1aa/0x230 [ 195.021790] bus_remove_device+0xd8/0x150 [ 195.022162] device_del+0x18b/0x3f0 [ 195.022487] device_unregister+0x13/0x60 [ 195.022852] ? vdpa_dev_remove+0x30/0x30 [vdpa] [ 195.023270] vp_vdpa_dev_del+0x12/0x20 [vp_vdpa] [ 195.023694] vdpa_match_remove+0x2b/0x40 [vdpa] [ 195.024115] bus_for_each_dev+0x78/0xc0 [ 195.024471] vdpa_mgmtdev_unregister+0x65/0x80 [vdpa] [ 195.024937] vp_vdpa_remove+0x23/0x40 [vp_vdpa] [ 195.025353] pci_device_remove+0x36/0xa0 [ 195.025719] device_release_driver_internal+0x1aa/0x230 [ 195.026201] pci_stop_bus_device+0x6c/0x90 [ 195.026580] pci_stop_and_remove_bus_device+0xe/0x20 [ 195.027039] disable_slot+0x49/0x90 [ 195.027366] acpiphp_disable_and_eject_slot+0x15/0x90 [ 195.027832] hotplug_event+0xea/0x210 [ 195.028171] ? hotplug_event+0x210/0x210 [ 195.028535] acpiphp_hotplug_notify+0x22/0x80 [ 195.028942] ? hotplug_event+0x210/0x210 [ 195.029303] acpi_device_hotplug+0x8a/0x1d0 [ 195.029690] acpi_hotplug_work_fn+0x1a/0x30 [ 195.030077] process_one_work+0x1e8/0x3c0 [ 195.030451] worker_thread+0x50/0x3b0 [ 195.030791] ? rescuer_thread+0x3a0/0x3a0 [ 195.031165] kthread+0xd9/0x100 [ 195.031459] ? kthread_complete_and_exit+0x20/0x20 [ 195.031899] ret_from_fork+0x22/0x30 [ 195.032233] </TASK> Fixes: ffbda8e9 ("vdpa/vp_vdpa : add vdpa tool support in vp_vdpa") Tested-by: Lei Yang <leiyang@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Cindy Lu <lulu@redhat.com> Message-Id: <20230214080924.131462-1-lulu@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dave Ertman authored
commit 248401cb upstream. RDMA is not supported in ice on a PF that has been added to a bonded interface. To enforce this, when an interface enters a bond, we unplug the auxiliary device that supports RDMA functionality. This unplug currently happens in the context of handling the netdev bonding event. This event is sent to the ice driver under RTNL context. This is causing a deadlock where the RDMA driver is waiting for the RTNL lock to complete the removal. Defer the unplugging/re-plugging of the auxiliary device to the service task so that it is not performed under the RTNL lock context. Cc: stable@vger.kernel.org # 6.1.x Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Link: https://lore.kernel.org/netdev/CAK8fFZ6A_Gphw_3-QMGKEFQk=sfCw1Qmq0TVZK3rtAi7vb621A@mail.gmail.com/ Fixes: 5cb1ebdb ("ice: Fix race condition during interface enslave") Fixes: 4eace75e ("RDMA/irdma: Report the correct link speed") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230310194833.3074601-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Elmer Miroslav Mosher Golovin authored
commit 9630d806 upstream. Added a quirk to fix the Netac NV3000 SSD reporting duplicate NGUIDs. Cc: <stable@vger.kernel.org> Signed-off-by: Elmer Miroslav Mosher Golovin <miroslav@mishamosher.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Kara via Ocfs2-devel authored
commit 90410bcf upstream. When buffered write fails to copy data into underlying page cache page, ocfs2_write_end_nolock() just zeroes out and dirties the page. This can leave dirty page beyond EOF and if page writeback tries to write this page before write succeeds and expands i_size, page gets into inconsistent state where page dirty bit is clear but buffer dirty bits stay set resulting in page data never getting written and so data copied to the page is lost. Fix the problem by invalidating page beyond EOF after failed write. Link: https://lkml.kernel.org/r/20230302153843.18499-1-jack@suse.cz Fixes: 6dbf7bb5 ("fs: Don't invalidate page buffers in block_write_full_page()") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chen Zhongjin authored
commit ee92fa44 upstream. KASAN reported follow problem: BUG: KASAN: use-after-free in lookup_rec Read of size 8 at addr ffff000199270ff0 by task modprobe CPU: 2 Comm: modprobe Call trace: kasan_report __asan_load8 lookup_rec ftrace_location arch_check_ftrace_location check_kprobe_address_safe register_kprobe When checking pg->records[pg->index - 1].ip in lookup_rec(), it can get a pg which is newly added to ftrace_pages_start in ftrace_process_locs(). Before the first pg->index++, index is 0 and accessing pg->records[-1].ip will cause this problem. Don't check the ip when pg->index is 0. Link: https://lore.kernel.org/linux-trace-kernel/20230309080230.36064-1-chenzhongjin@huawei.com Cc: stable@vger.kernel.org Fixes: 9644302e ("ftrace: Speed up search by skipping pages by address") Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-