- Apr 04, 2017
-
-
Ariel Elior authored
Refactor and clean up the queue manager initialization logic. Also, this adds support for RoC low latency queues, which later would be used for improving RoCE latency in high throughput scenarios. Signed-off-by:
Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Greg Ungerer authored
Add support for the net stats64 counters to the usbnet core. With that in place put the hooks into every usbnet driver to use it. This is a strait forward addition of 64bit counters for RX and TX packet and byte counts. It is done in the same style as for the other net drivers that support stats64. Note that the other stats fields remain as 32bit sized values (error counts, etc). The motivation to add this is that it is not particularly difficult to get the RX and TX byte counts to wrap on 32bit platforms. Signed-off-by:
Greg Ungerer <gerg@linux-m68k.org> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexey Dobriyan authored
Number of sockets is limited by 16-bit, so 64-bit allocation will never happen. 16-bit ops are the worst code density-wise on x86_64 because of additional prefix (66). Space savings: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-3 (-3) function old new delta reuseport_add_sock 539 536 -3 Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexey Dobriyan authored
Make ->hash_count, ->low_watermark and ->high_watermark unsigned int and propagate unsignedness to other variables. This change doesn't change code generation because these fields aren't used in 64-bit contexts but make it anyway: these fields can't be negative numbers. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexey Dobriyan authored
Hash size can't negative so "unsigned int" is logically correct. Propagate "unsigned int" to loop counters. Space savings: add/remove: 0/0 grow/shrink: 2/2 up/down: 6/-18 (-12) function old new delta flow_cache_flush_tasklet 362 365 +3 __flow_cache_shrink 333 336 +3 flow_cache_cpu_up_prep 178 171 -7 flow_cache_lookup 1159 1148 -11 Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexey Dobriyan authored
Flow keys aren't 4GB+ numbers so 64-bit arithmetic is excessive. Space savings (I'm not sure what CSWTCH is): add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-48 (-48) function old new delta flow_cache_lookup 1163 1159 -4 CSWTCH 75997 75953 -44 Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
Breaking the include loop netdevice.h, dsa.h, devlink.h broke this driver, it depends on includes brought in by these headers. Adding linux/of.h fixes it. Fixes: ed0e39e97d34 ("net: break include loop netdevice.h, dsa.h, devlink.h") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vincent Bernat authored
When an incoming frame is tagged or when GRO is disabled, the skb handled to vxlan_xmit() doesn't contain a valid transport header offset. This makes ND proxying fail. We combine two changes: replace use of skb_transport_offset() and ensure the necessary amount of skb is linear just before using it: - In vxlan_xmit(), when determining if we have an ICMPv6 neighbor discovery packet, just check if it is an ICMPv6 packet and rely on neigh_reduce() to do more checks if this is the case. The use of pskb_may_pull() is replaced by skb_header_pointer() for just the IPv6 header. - In neigh_reduce(), add pskb_may_pull() for IPv6 header and neighbor discovery message since this was removed from vxlan_xmit(). Replace skb_transport_header() with ipv6_hdr() + 1. - In vxlan_na_create(), replace first skb_transport_offset() with ipv6_hdr() + 1 and second with skb_network_offset() + sizeof(struct ipv6hdr). Additionally, ensure we pskb_may_pull() the whole skb as we need it to iterate over the options. Signed-off-by:
Vincent Bernat <vincent@bernat.im> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
Before when implementing sctp prsctp, SCTP_PR_STREAM_STATUS wasn't added, as it needs to save abandoned_(un)sent for every stream. After sctp stream reconf is added in sctp, assoc has structure sctp_stream_out to save per stream info. This patch is to add SCTP_PR_STREAM_STATUS by putting the prsctp per stream statistics into sctp_stream_out. v1->v2: fix an indent issue. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Salil Mehta says: ==================== net: hns: Misc. HNS Bug Fixes & Code Improvements This patch set introduces various HNS bug fixes, optimizations and code improvements. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Salil authored
This patch fixes some checkpatch.pl script caught errors and warnings during the compilation time. Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
lipeng authored
There is a bug on Hip06 that tx ring interrupts packets count will be clear when drivers send data to tx ring, so that the tx packets count will never upgrade to packets line, and cause the interrupts engendered was delayed. Sometimes, it will cause sending performance lower than expected. To fix this bug, we set tx ring interrupts packets line to 1 forever, to avoid count clear. And set the gap time to 20us, to solve the problem that too many interrupts engendered when packets line is 1. This patch could advance the send performance on ARM from 6.6G to 9.37G when an iperf send thread on ARM and an iperf send thread on X86 for XGE. Signed-off-by:
lipeng <lipeng321@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kejian Yan authored
HNS needs SMB Buffers to store at least two packets after sending pause frame because of the link delay. The MTU of HNS is 9728. As the processor user manual described, the SBM buffer threshold should be modified. Reported-by:
Ping Zhang <zhangping5@huawei.com> Signed-off-by:
Kejian Yan <yankejian@huawei.com> Reviewed-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kejian Yan authored
We need to free all ppe submodule if it fails to initialize ppe by any fault, so this patch will free all ppe resource before hns_ppe_init() returns exception situation Reported-by:
JinchuanTian <tianjinchuan1@huawei.com> Signed-off-by:
Kejian Yan <yankejian@huawei.com> Reviewed-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kejian Yan authored
This patch fixes the code to clear pclint warning/info. Reported-by:
Ping Zhang <zhangping5@huawei.com> Signed-off-by:
Kejian Yan <yankejian@huawei.com> Reviewed-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kejian Yan authored
This patch cleans the redundant code from hns_mdio.c. Reported-by:
Ping Zhang <zhangping5@huawei.com> Signed-off-by:
Kejian Yan <yankejian@huawei.com> Reviewed-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kejian Yan authored
This patch removes redundant functions used only for debugging purposes. Reported-by:
Weiwei Deng <dengweiwei@huawei.com> Signed-off-by:
Kejian Yan <yankejian@huawei.com> Reviewed-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kejian Yan authored
There is a mac_id in mac control block structure, so the callback function mac_get_id() is useless. Here we remove this function. Reported-by:
Weiwei Deng <dengweiwei@huawei.com> Signed-off-by:
Kejian Yan <yankejian@huawei.com> Reviewed-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kejian Yan authored
The functions (hns_dsaf_set_mac_mc_entry() and hns_mac_del_mac()) are not called by any functions. They are dead code in hns. And the same features are implemented by the patch (the id is 66355f52 ). Reported-by:
Weiwei Deng <dengweiwei@huawei.com> Signed-off-by:
Kejian Yan <yankejian@huawei.com> Reviewed-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
lipeng authored
This patch fixes below ethtool configuration error: localhost:~ # ethtool -X eth0 hkey XX:XX:XX... Cannot set Rx flow hash configuration: Operation not supported Signed-off-by:
lipeng <lipeng321@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
lipeng authored
netif_tx_lock is a global spin lock, it will take affect in all rings in the netdevice. In tx_poll_one process, it can only lock the current ring, in this case, we define a spin lock in hnae_ring struct for it. Signed-off-by:
lipeng <lipeng321@huawei.com> reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
lipeng authored
Because buf_size of ring set to 2048, the process of rx_poll_one can reuse the page, therefore the performance of XGE can improve. But the chip only supports three bds in one package, so the max mtu is 6K when it sets to 2048. For better performane in litter mtu, we need change buf_size according to mtu. When user change mtu, hns is only change the desc in memory. There are some desc has been fetched by the chip, these desc can not be changed by the code. So it needs set the port loopback and send some packages to let the chip consumes the wrong desc and fetch new desc. Because the Pv660 do not support rss indirection, we need add version check in mtu change process. Signed-off-by:
lipeng <lipeng321@huawei.com> reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
lipeng authored
After polling less than buget packages, we need check again. If there are still some packages, we call napi_schedule add softirq queue, this is not better way. So we return buget value instead of napi_schedule. Signed-off-by:
lipeng <lipeng321@huawei.com> reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daode Huang authored
When run ethtool ethX on hns driver, the speed will show as "Unknown". The base.speed is not correct assigned, this patch fix this bug. Signed-off-by:
Daode Huang <huangdaode@hisilicon.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
lipeng authored
Because all members of desc_cb is assigned when xmit one package, so it can delete in hnae_free_buffer, as follows: - "dma, priv, length, type" are assigned in fill_v2_desc. - "page_offset, reuse_flag, buf" are not used in tx direction. Signed-off-by:
lipeng <lipeng321@huawei.com> Signed-off-by:
Weiwei Deng <dengweiwei@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
lipeng authored
This patch optimises the init configuration code leg for gmac pad and crc set interface. Signed-off-by:
lipeng <lipeng321@huawei.com> Signed-off-by:
JinchuanTian <tianjinchuan1@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
lipeng authored
This patch reduces GMAC TX threshold value to avoid gmac hang-up with speed 100M/duplex half. Signed-off-by:
lipeng <lipeng321@huawei.com> Signed-off-by:
JinchuanTian <tianjinchuan1@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
lipeng authored
This patch fixes the implementation of the IRQ affinity function. This function is used to create the cpu mask which eventually is used to initialize the cpu<->queue association for XPS(Transmit Packet Steering). Signed-off-by:
lipeng <lipeng321@huawei.com> Signed-off-by:
Kejian Yan <yankejian@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Apr 03, 2017
-
-
David S. Miller authored
Sowmini Varadhan says: ==================== rds: tcp: couple of minor bug fixes A couple of minor bugfixes that showed up during testing ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sowmini Varadhan authored
The rds_connect_worker() has a bug in the check that enforces the canonical connection order described in the comments of rds_tcp_state_change(). The intention is to make sure that all the multipath connections are always initiated by the smaller IP address via rds_start_mprds. To achieve this, rds_connection_worker should check that cp_index > 0. Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sowmini Varadhan authored
rds: tcp: allow progress of rds_conn_shutdown if the rds_connection is marked ERROR by an intervening FIN rds_conn_shutdown() runs in workq context, and marks the rds_connection as DISCONNECTING before quiescing Tx/Rx paths. However, after all I/O has quiesced, we may still find the rds_connection state to be RDS_CONN_ERROR if an intervening FIN was processed in softirq context. This is not a fatal error: rds_conn_shutdown() should continue the shutdown, and there is no need to log noisy messages about this event. Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
It seems the code does not match the intent. This broke packetdrill, and probably other programs. Fixes: 6c7c98ba ("sock: avoid dirtying sk_stamp, if possible") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Morton authored
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c: In function 'mlx5e_set_rxfh': drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1067: error: unknown field 'rss' specified in initializer drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1067: warning: missing braces around initializer drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1067: warning: (near initialization for 'rrp.<anonymous>') drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1068: error: unknown field 'rss' specified in initializer drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1069: warning: excess elements in struct initializer drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1069: warning: (near initialization for 'rrp') gcc-4.4.4 has issues with anonymous union initializers. Work around this. Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Morton authored
drivers/net/ethernet/mellanox/mlx5/core/en_main.c: In function 'mlx5e_redirect_rqts': drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2210: error: unknown field 'rqn' specified in initializer drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2211: warning: missing braces around initializer drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2211: warning: (near initialization for 'direct_rrp.<anonymous>') drivers/net/ethernet/mellanox/mlx5/core/en_main.c: In function 'mlx5e_redirect_rqts_to_channels': drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2227: error: unknown field 'rss' specified in initializer drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2227: warning: missing braces around initializer drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2227: warning: (near initialization for 'rrp.<anonymous>') drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2227: warning: initialization makes integer from pointer without a cast drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2228: error: unknown field 'rss' specified in initializer drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2229: warning: excess elements in struct initializer drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2229: warning: (near initialization for 'rrp') drivers/net/ethernet/mellanox/mlx5/core/en_main.c: In function 'mlx5e_redirect_rqts_to_drop': drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2238: error: unknown field 'rqn' specified in initializer drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2239: warning: missing braces around initializer drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2239: warning: (near initialization for 'drop_rrp.<anonymous>') gcc-4.4.4 has issues with anonymous union initializers. Work around this. Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joao Pinto authored
Sending again, because forgot to include net-dev. The QoS IP does not accept AVB capabilities to default/queue 0, this way we guarantee 75% bandwidth for AVB. This patch assures that only queues >= 1 gets CBS confgured. Additional info was also added to stmmac.txt. Reported-by:
Niklas Cassel <niklas.cassel@axis.com> Signed-off-by:
Joao Pinto <jpinto@synopsys.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Apr 02, 2017
-
-
David S. Miller authored
David Ahern says: ==================== net: mpls: Allow users to configure more labels per route Increase the maximum number of new labels for MPLS routes from 2 to 30. To keep memory consumption in check, the labels array is moved to the end of mpls_nh and mpls_iptunnel_encap structs as a 0-sized array. Allocations use the maximum number of labels across all nexthops in a route for LSR and the number of labels configured for LWT. The mpls_route layout is changed to: +----------------------+ | mpls_route | +----------------------+ | mpls_nh 0 | +----------------------+ | alignment padding | 4 bytes for odd number of labels; 0 for even +----------------------+ | via[rt_max_alen] 0 | +----------------------+ | alignment padding | via's aligned on sizeof(unsigned long) +----------------------+ | ... | Meaning the via follows its mpls_nh providing better locality as the number of labels increases. UDP_RR tests with namespaces shows no impact to a modest performance increase with this layout for 1 or 2 labels and 1 or 2 nexthops. mpls_route allocation size is limited to 4096 bytes allowing on the order of 30 nexthops with 30 labels (or more nexthops with fewer labels). LWT encap shares same maximum number of labels as mpls routing. v3 - initialize n_labels to 0 in case RTA_NEWDST is not defined; detected by the kbuild test robot v2 - updates per Eric's comments + added patch to ensure all reads of rt_nhn_alive and nh_flags in the packet path use READ_ONCE and all writes via event handlers use WRITE_ONCE + limit mpls_route size to 4096 (PAGE_SIZE for most arch) + mostly killed use of MAX_NEW_LABELS; it exists only for common limit between lwt and routing paths ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Ahern authored
Alow users to push down more labels per MPLS encap. Similar to LSR case, move label array to the end of mpls_iptunnel_encap and allocate based on the number of labels for the route. For consistency with the LSR case, re-use the same maximum number of labels. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Ahern authored
Allow users to push down more labels per MPLS route. With the previous patches, no memory allocations are based on MAX_NEW_LABELS; the limit is only used to keep userspace in check. At this point MAX_NEW_LABELS is only used for mpls_route_config (copying route data from userspace) and processing nexthops looking for the max number of labels across the route spec. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Ahern authored
Limit memory allocation size for mpls_route to 4096. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Ahern authored
Move labels to the end of mpls_nh as a 0-sized array and within mpls_route move the via for a nexthop after the mpls_nh. The new layout becomes: +----------------------+ | mpls_route | +----------------------+ | mpls_nh 0 | +----------------------+ | alignment padding | 4 bytes for odd number of labels; 0 for even +----------------------+ | via[rt_max_alen] 0 | +----------------------+ | alignment padding | via's aligned on sizeof(unsigned long) +----------------------+ | ... | +----------------------+ | mpls_nh n-1 | +----------------------+ | via[rt_max_alen] n-1 | +----------------------+ Memory allocated for nexthop + via is constant across all nexthops and their via. It is based on the maximum number of labels across all nexthops and the maximum via length. The size is saved in the mpls_route as rt_nh_size. Accessing a nexthop becomes rt->rt_nh + index * rt->rt_nh_size. The offset of the via address from a nexthop is saved as rt_via_offset so that given an mpls_nh pointer the via for that hop is simply nh + rt->rt_via_offset. With prior code, memory allocated per mpls_route with 1 nexthop: via is an ethernet address - 64 bytes via is an ipv4 address - 64 via is an ipv6 address - 72 With this patch set, memory allocated per mpls_route with 1 nexthop and 1 or 2 labels: via is an ethernet address - 56 bytes via is an ipv4 address - 56 via is an ipv6 address - 64 The 8-byte reduction is due to the previous patch; the change introduced by this patch has no impact on the size of allocations for 1 or 2 labels. Performance impact of this change was examined using network namespaces with veth pairs connecting namespaces. ns0 inserts the packet to the label-switched path using an lwt route with encap mpls. ns1 adds 1 or 2 labels depending on test, ns2 (and ns3 for 2-label test) pops the label and forwards. ns3 (or ns4) for a 2-label is the destination. Similar series of namespaces used for 2-nexthop test. Intent is to measure changes to latency (overhead in manipulating the packet) in the forwarding path. Tests used netperf with UDP_RR. IPv4: current patches 1 label, 1 nexthop 29908 30115 2 label, 1 nexthop 29071 29612 1 label, 2 nexthop 29582 29776 2 label, 2 nexthop 29086 29149 IPv6: current patches 1 label, 1 nexthop 24502 24960 2 label, 1 nexthop 24041 24407 1 label, 2 nexthop 23795 23899 2 label, 2 nexthop 23074 22959 In short, the change has no effect to a modest increase in performance. This is expected since this patch does not really have an impact on routes with 1 or 2 labels (the current limit) and 1 or 2 nexthops. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-