- Jan 28, 2017
-
-
David S. Miller authored
Edward Cree says: ==================== sfc: encapsulated filters This series adds support for setting up filters for encapsulated traffic on SFC 8000-series adapters, which recognise VXLAN, GENEVE and NVGRE packets by parsing packet headers. (VXLAN and GENEVE will only be recognised if the driver on the primary PF has notified the firmware of relevant UDP ports, which this driver does not yet do.) While the driver currently has no way of using these filters for flow steering, it is nonetheless necessary to insert catch-all (aka 'default') filters to direct this traffic, similar to the existing unencapsulated uni- and multi-cast catch-all filters, as otherwise the traffic will be dropped by the NIC - implementation details of the hardware filtering mean that the traffic will not get matched on outer MAC address to unencapsulated catch- all filters. (Yes, this is a mess.) Although this is, therefore, fixing a bug in the existing driver, it's a bug which has existed since 8000 series support was added, and the fix involves quite a big patch with an 'adding features' flavour to it, hence why this is for net-next rather than net and stable. v2: move netif_cond_dbg into netdevice.h and its own patch ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Edward Cree authored
8000 series adapters support filtering VXLAN, NVGRE and GENEVE traffic based on inner fields, and when the NIC recognises such traffic, it does not match unencapsulated traffic filters any more. So add catch- all filters for encapsulated traffic on supporting platforms. Although recognition of VXLAN and GENEVE is based on UDP ports, and thus will not occur until the driver (on the primary PF) notifies the firmware of UDP ports to use, NVGRE will always be recognised, hence without this patch 8000 series adapters will drop all NVGRE traffic. Partly based on patches by Jon Cooper <jcooper@solarflare.com>. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Cooper authored
Rationalise several debug-or-warnings printks using netif_cond_dbg to make output more consistent. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Edward Cree authored
For reporting things that may or may not be serious, depending on some condition, netif_cond_dbg will check the condition and print the report at either dbg (if the condition is true) or the specified level. Suggested-by:
Jon Cooper <jcooper@solarflare.com> Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Cooper authored
If the NIC is switched from full-featured to low-latency, encapsulated filters are no longer available, and this causes errors. This patch removes those filters from the filter table on restore. Also, if filters which are removed by the above, or which we fail to insert when restoring filters, were UC, MC or broadcast default filters, invalidate the corresponding vlan->default_filters entry. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tobias Klauser authored
The stats member of struct frad_locl is used neither by the dlci nor the sdla driver, so it might as well be removed. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rafał Miłecki authored
It's Broadcom PHY simply described as single-port RGMII 10/100/1000BASE-T PHY. It requires disabling delay skew and GTXCLK bits. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'linux-can-next-for-4.11-20170124' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2017-01-24 this is a pull request of 4 patches for net-next/master. The first patch by Oliver Hartkopp adds a netlink API to configure the interface termination of a CAN card. The next two patches are by me and add a netlink API to query and configure CAN interfaces that only support fixed bitrates. The last patch by Colin Ian King simplifies the return path in the softing_cs driver's softingcs_probe() function. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jan 27, 2017
-
-
Felix Jia authored
Signed-off-by:
Felix Jia <felix.jia@alliedtelesis.co.nz> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Felix Jia authored
The address generation mode for IPv6 link-local can only be configured by netlink messages. This patch adds the ability to change the address generation mode via sysctl. v1 -> v2 Removed the rtnl lock and switch to use RCU lock to iterate through the netdev list. v2 -> v3 Removed the addrgenmode variable from the idev structure and use the systcl storage for the flag. Simplifed the logic for sysctl handling by removing the supported for all operation. Added support for more types of tunnel interfaces for link-local address generation. Based the patches from net-next. v3 -> v4 Removed unnecessary whitespace changes. Signed-off-by:
Felix Jia <felix.jia@alliedtelesis.co.nz> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Commit 16e5cc64 ("net: rework setup_tc ndo op to consume general tc operand") changed the ndo_setup_tc() signature, but did not update the comments in netdevice.h, so do that now. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
John Fastabend <john.r.fastabend@intel.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Ahern authored
lkp-robot reported a BUG: [ 10.151226] BUG: unable to handle kernel NULL pointer dereference at 00000198 [ 10.152525] IP: rt6_fill_node+0x164/0x4b8 [ 10.153307] *pdpt = 0000000012ee5001 *pde = 0000000000000000 [ 10.153309] [ 10.154492] Oops: 0000 [#1] [ 10.154987] CPU: 0 PID: 909 Comm: netifd Not tainted 4.10.0-rc4-00722-g41e8c70ee162-dirty #10 [ 10.156482] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 10.158254] task: d0deb000 task.stack: d0e0c000 [ 10.159059] EIP: rt6_fill_node+0x164/0x4b8 [ 10.159780] EFLAGS: 00010296 CPU: 0 [ 10.160404] EAX: 00000000 EBX: d10c2358 ECX: c1f7c6cc EDX: c1f6ff44 [ 10.161469] ESI: 00000000 EDI: c2059900 EBP: d0e0dc4c ESP: d0e0dbe4 [ 10.162534] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 10.163482] CR0: 80050033 CR2: 00000198 CR3: 10d94660 CR4: 000006b0 [ 10.164535] Call Trace: [ 10.164993] ? paravirt_sched_clock+0x9/0xd [ 10.165727] ? sched_clock+0x9/0xc [ 10.166329] ? sched_clock_cpu+0x19/0xe9 [ 10.166991] ? lock_release+0x13e/0x36c [ 10.167652] rt6_dump_route+0x4c/0x56 [ 10.168276] fib6_dump_node+0x1d/0x3d [ 10.168913] fib6_walk_continue+0xab/0x167 [ 10.169611] fib6_walk+0x2a/0x40 [ 10.170182] inet6_dump_fib+0xfb/0x1e0 [ 10.170855] netlink_dump+0xcd/0x21f This happens when the loopback device is set down and a ipv6 fib route dump is requested. ip6_null_entry is the root of all ipv6 fib tables making it integrated into the table and hence passed to the ipv6 route dump code. The null_entry route uses the loopback device for dst.dev but may not have rt6i_idev set because of the order in which initializations are done -- ip6_route_net_init is run before addrconf_init has initialized the loopback device. Fixing the initialization order is a much bigger problem with no obvious solution thus far. The BUG is triggered when the loopback is set down and the netif_running check added by a1a22c12 fails. The fill_node descends to checking rt->rt6i_idev for ignore_routes_with_linkdown and since rt6i_idev is NULL it faults. The null_entry route should not be processed in a dump request. Catch and ignore. This check is done in rt6_dump_route as it is the highest place in the callchain with knowledge of both the route and the network namespace. Fixes: a1a22c12 ("net: ipv6: Keep nexthop of multipath route on admin down") Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Ahern authored
Remove skb_reserve and skb_reset_mac_header from inet6_rtm_getroute. The allocated skb is not passed through the routing engine (like it is for IPv4) and has not since the beginning of git time. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Florian Fainelli says: ==================== net: dsa: Preparatory patches This patch series extracts the 4 patches of the larger: net: dsa: Support for pdata in dsa2 while we wait for feedback from Greg KH on the device references. Changes in v2: - rebased properly after the multi-MDIO bus support added to mv88e6xxx ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Move the assignment of ports in _dsa_register_switch() closer to where it is checked, no functional change. Re-order declarations to be preserve the inverted christmas tree style. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Make it clear that these functions take a device_node structure pointer Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
In preparation for allowing platform data, and therefore no valid device_node pointer, make most DSA functions takes a pointer to a dsa_port structure whenever possible. While at it, introduce a dsa_port_is_valid() helper function which checks whether port->dn is NULL or not at the moment. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
In preparation for allowing dsa_register_switch() to be supplied with device/platform data, pass down a struct device pointer instead of a struct device_node. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Satanand Burla authored
Accessing skb after submitting to input queue can cause access to stale pointers if the skb ends up being transmitted and freed by that time. Signed-off-by:
Satanand Burla <satananda.burla@cavium.com> Signed-off-by:
Derek Chickles <derek.chickles@cavium.com> Signed-off-by:
Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - ignore self-generated loop detect MAC addresses in translation table, by Simon Wunderlich - install uapi batman_adv.h header, by Sven Eckelmann - bump copyright years, by Sven Eckelmann - Remove an unused variable in translation table code, by Sven Eckelmann - Handle NET_XMIT_CN like NET_XMIT_SUCCESS (revised according to Davids suggestion), and a follow up code clean up, by Gao Feng (2 patches) ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
I noticed that this function uses a lot of kernel stack when the "latent entropy" plugin is enabled: drivers/isdn/hardware/eicon/message.c: In function 'sig_ind': drivers/isdn/hardware/eicon/message.c:6113:1: error: the frame size of 1168 bytes is larger than 1152 bytes [-Werror=frame-larger-than=] We currently don't warn about this, as we raise the warning limit to 2048 bytes in mainline, but I'd like to lower that limit again in the future, and this function can easily be changed to be more efficient and avoid that warning, by making some of its local variables 'const'. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jan 26, 2017
-
-
Gao Feng authored
The tc could return NET_XMIT_CN as one congestion notification, but it does not mean the packet is lost. Other modules like ipvlan, macvlan, and others treat NET_XMIT_CN as success too. So batman-adv should handle NET_XMIT_CN also as NET_XMIT_SUCCESS. Signed-off-by:
Gao Feng <gfree.wind@gmail.com> [sven@narfation.org: Moved NET_XMIT_CN handling to batadv_send_skb_packet] Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de>
-
Gao Feng authored
It could decrease one condition check to collect some statements in the first condition block. Signed-off-by:
Gao Feng <gfree.wind@gmail.com> Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de>
-
Sven Eckelmann authored
Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de>
-
Sven Eckelmann authored
Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de>
-
Sven Eckelmann authored
09748a22 ("batman-adv: add generic netlink family for batman-adv") introduced the new batman_adv.h which describes the netlink attributes and commands of batman-adv. But the Kbuild entry to install the header was not added. All currently known tools ship their own copy of batman_adv.h but it should be installed anyway to later be able to migrate to the system batman_adv.h. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de>
-
Simon Wunderlich authored
The bridge loop avoidance (BLA) feature of batman-adv sends packets to probe for Mesh/LAN packet loops. Those packets are not sent by real clients and should therefore not be added to the translation table (TT). Signed-off-by:
Simon Wunderlich <simon.wunderlich@open-mesh.com>
-
Arnd Bergmann authored
The only caller of this new function is inside of an #ifdef checking for CONFIG_BRIDGE_IGMP_SNOOPING, so we should move the implementation there too, in order to avoid this harmless warning: net/bridge/br_forward.c:177:13: error: 'maybe_deliver_addr' defined but not used [-Werror=unused-function] Fixes: 6db6f0ea ("bridge: multicast to unicast") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
We currently used len instead of prefix_len for the strncmp() in fdinfo on the prog_tag. It still worked as we matched on the correct output line also with first 8 instead of 10 chars, but lets fix it properly to use the intended length. Fixes: 62b64660 ("bpf: add prog tag test case to bpf selftests") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Rafał Miłecki says: ==================== net-next: Broadcom PHY driver cleanup I will probably need to use broadcom.ko for PHY connected to interface of bgmac supported device so I started looking at it willing to understand it better. I found AUXCTL part of the driver / lib a bit confusing and hard to read so I'm trying to clean it up a bit. I hope this patchset makes following AUXCTL operations much easier making it clear which defines are for registers and which for values. There is no functional change in this pachset. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rafał Miłecki authored
1) Use 0x%02x format for register number. This follows some other defines and makes it easier to distinct register from values. 2) Put register define above values and sort the values. It makes reading header code easier. 3) Use 0x%04x format for all values. It's about consistency with other values (and most of the header) not a personal preference. 4) Separate define for reading shift value with an extre empty line. It's user for all AUXCTL registers in a bcm54xx_auxctl_read. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rafał Miłecki authored
We had two defines for the same bit (both were used with the MII_BCM54XX_AUXCTL_SHDWSEL_MISC register). Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rafał Miłecki authored
Starting with commit 5b4e2900 ("net: phy: broadcom: add bcm54xx_auxctl_read") we have a reading helper so use it and avoid code duplication. It also means we don't need MII_BCM54XX_AUXCTL_SHDWSEL_MISC define as it's the same as MII_BCM54XX_AUXCTL_SHDWSEL_MISC just for reading needs (same value shifted by 12 bits). Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
Previous patches have moved the temperature sensor code into the Marvell PHYs. A few now dead references to NET_DSA_HWMON were left behind. Go reap them. Reported-by:
Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tomáš Pilař authored
PIO buffer allocation can fail for two valid reasons: - we've run out of them (results in -ENOSPC) - the NIC configuration doesn't support them (results in -EPERM) Since both these failures are expected netif_err is excessive. Signed-off-by:
Bert Kenward <bkenward@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sunil Goutham says: ==================== thunderx: More ethtool support and BGX configuration changes These patches adds support to set queue sizes from ethtool and changes the way serdes lane configuration is done by BGX driver on 81/83xx platforms. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sunil Goutham authored
For DLMs and SLMs on 80/81/83xx, many lane configurations across different boards are coming up. Also kernel doesn't have any way to identify board type/info and since firmware does, just get rid of figuring out lane to serdes config and take whatever has been programmed by low level firmware. Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sunil Goutham authored
Adds support to set Rx/Tx queue sizes from ethtool. Fixes an issue with retrieving queue size. Also sets SQ's CQ_LIMIT based on configured Tx queue size such that HW doesn't process SQEs when there is no sufficient space in CQ. Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Willy Tarreau authored
Without TFO, any subsequent connect() call after a successful one returns -1 EISCONN. The last API update ensured that __inet_stream_connect() can return -1 EINPROGRESS in response to sendmsg() when TFO is in use to indicate that the connection is now in progress. Unfortunately since this function is used both for connect() and sendmsg(), it has the undesired side effect of making connect() now return -1 EINPROGRESS as well after a successful call, while at the same time poll() returns POLLOUT. This can confuse some applications which happen to call connect() and to check for -1 EISCONN to ensure the connection is usable, and for which EINPROGRESS indicates a need to poll, causing a loop. This problem was encountered in haproxy where a call to connect() is precisely used in certain cases to confirm a connection's readiness. While arguably haproxy's behaviour should be improved here, it seems important to aim at a more robust behaviour when the goal of the new API is to make it easier to implement TFO in existing applications. This patch simply ensures that we preserve the same semantics as in the non-TFO case on the connect() syscall when using TFO, while still returning -1 EINPROGRESS on sendmsg(). For this we simply tell __inet_stream_connect() whether we're doing a regular connect() or in fact connecting for a sendmsg() call. Cc: Wei Wang <weiwan@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Wei Wang says: ==================== net/tcp-fastopen: Add new userspace API support The patch series is to add support for new userspace API for TCP fastopen sockets. In the current code, user has to call sendto()/sendmsg() with special flag MSG_FASTOPEN for TCP fastopen sockets. This API is quite different from the normal TCP socket API and can be cumbersome for applications to make use fastopen sockets. So this new patch introduces a new way of using TCP fastopen sockets which is similar to normal TCP sockets with a new sockopt TCP_FASTOPEN_CONNECT. More details about it is described in the third patch. (First 2 patches are preparations for the third patch.) ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-