devm_kmalloc() returns a pointer to allocated memory on success, NULL
on failure. While lp->indirect_lock is allocated by devm_kmalloc()
without proper check. It is better to check the value of it to
prevent potential wrong memory access.

Fixes: f14f5c11

 ("net: ll_temac: Support indirect_mutex share within TEMAC IP")
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

UDP sendmsg() can be lockless, this is causing all kinds
of data races.

This patch converts sk->sk_tskey to remove one of these races.

BUG: KCSAN: data-race in __ip_append_data / __ip_append_data

read to 0xffff8881035d4b6c of 4 bytes by task 8877 on cpu 1:
 __ip_append_data+0x1c1/0x1de0 net/ipv4/ip_output.c:994
 ip_make_skb+0x13f/0x2d0 net/ipv4/ip_output.c:1636
 udp_sendmsg+0x12bd/0x14c0 net/ipv4/udp.c:1249
 inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg net/socket.c:725 [inline]
 ____sys_sendmsg+0x39a/0x510 net/socket.c:2413
 ___sys_sendmsg net/socket.c:2467 [inline]
 __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
 __do_sys_sendmmsg net/socket.c:2582 [inline]
 __se_sys_sendmmsg net/socket.c:2579 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

write to 0xffff8881035d4b6c of 4 bytes by task 8880 on cpu 0:
 __ip_append_data+0x1d8/0x1de0 net/ipv4/ip_output.c:994
 ip_make_skb+0x13f/0x2d0 net/ipv4/ip_output.c:1636
 udp_sendmsg+0x12bd/0x14c0 net/ipv4/udp.c:1249
 inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg net/socket.c:725 [inline]
 ____sys_sendmsg+0x39a/0x510 net/socket.c:2413
 ___sys_sendmsg net/socket.c:2467 [inline]
 __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
 __do_sys_sendmmsg net/socket.c:2582 [inline]
 __se_sys_sendmmsg net/socket.c:2579 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x0000054d -> 0x0000054e

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 8880 Comm: syz-executor.5 Not tainted 5.17.0-rc2-syzkaller-00167-gdcb85f85fa6f-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 09c2d251

 ("net-timestamp: add key to disambiguate concurrent datagrams")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A malicious device can leak heap data to user space
providing bogus frame lengths. Introduce a sanity check.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Flow table lookup is skipped if packet either went through ct clear
action (which set the IP_CT_UNTRACKED flag on the packet), or while
switching zones and there is already a connection associated with
the packet. This will result in no SW offload of the connection,
and the and connection not being removed from flow table with
TCP teardown (fin/rst packet).

To fix the above, remove these unneccary checks in flow
table lookup.

Fixes: 46475bb2

 ("net/sched: act_ct: Software offload of established flows")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When bringing down the netdevice or system shutdown, a panic can be
triggered while accessing the sysfs path because the device is already
removed.

    [  755.549084] mlx5_core 0000:12:00.1: Shutdown was called
    [  756.404455] mlx5_core 0000:12:00.0: Shutdown was called
    ...
    [  757.937260] BUG: unable to handle kernel NULL pointer dereference at           (null)
    [  758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280

    crash> bt
    ...
    PID: 12649  TASK: ffff8924108f2100  CPU: 1   COMMAND: "amsd"
    ...
     #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778
        [exception RIP: dma_pool_alloc+0x1ab]
        RIP: ffffffff8ee11acb  RSP: ffff89240e1a3968  RFLAGS: 00010046
        RAX: 0000000000000246  RBX: ffff89243d874100  RCX: 0000000000001000
        RDX: 0000000000000000  RSI: 0000000000000246  RDI: ffff89243d874090
        RBP: ffff89240e1a39c0   R8: 000000000001f080   R9: ffff8905ffc03c00
        R10: ffffffffc04680d4  R11: ffffffff8edde9fd  R12: 00000000000080d0
        R13: ffff89243d874090  R14: ffff89243d874080  R15: 0000000000000000
        ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
    #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core]
    #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core]
    #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core]
    #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core]
    #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core]
    #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core]
    #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core]
    #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46
    #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208
    #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3
    #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf
    #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596
    #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10
    #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5
    #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff
    #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f
    #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92

    crash> net_device.state ffff89443b0c0000
      state = 0x5  (__LINK_STATE_START| __LINK_STATE_NOCARRIER)

To prevent this scenario, we also make sure that the netdevice is present.

Signed-off-by: suresh kumar <suresh2514@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a 6pack device is detaching, the sixpack_close() will act to cleanup
necessary resources. Although del_timer_sync() in sixpack_close()
won't return if there is an active timer, one could use mod_timer() in
sp_xmit_on_air() to wake up timer again by calling userspace syscall such
as ax25_sendmsg(), ax25_connect() and ax25_ioctl().

This unexpected waked handler, sp_xmit_on_air(), realizes nothing about
the undergoing cleanup and may still call pty_write() to use driver layer
resources that have already been released.

One of the possible race conditions is shown below:

      (USE)                      |      (FREE)
ax25_sendmsg()                   |
 ax25_queue_xmit()               |
  ...                            |
  sp_xmit()                      |
   sp_encaps()                   | sixpack_close()
    sp_xmit_on_air()             |  del_timer_sync(&sp->tx_t)
     mod_timer(&sp->tx_t,...)    |  ...
                                 |  unregister_netdev()
                                 |  ...
     (wait a while)              | tty_release()
                                 |  tty_release_struct()
                                 |   release_tty()
    sp_xmit_on_air()             |    tty_kref_put(tty_struct) //FREE
     pty_write(tty_struct) //USE |    ...

The corresponding fail log is shown below:
===============================================================
BUG: KASAN: use-after-free in __run_timers.part.0+0x170/0x470
Write of size 8 at addr ffff88800a652ab8 by task swapper/2/0
...
Call Trace:
  ...
  queue_work_on+0x3f/0x50
  pty_write+0xcd/0xe0pty_write+0xcd/0xe0
  sp_xmit_on_air+0xb2/0x1f0
  call_timer_fn+0x28/0x150
  __run_timers.part.0+0x3c2/0x470
  run_timer_softirq+0x3b/0x80
  __do_softirq+0xf1/0x380
  ...

This patch reorders the del_timer_sync() after the unregister_netdev()
to avoid UAF bugs. Because the unregister_netdev() is well synchronized,
it flushs out any pending queues, waits the refcount of net_device
decreases to zero and removes net_device from kernel. There is not any
running routines after executing unregister_netdev(). Therefore, we could
not arouse timer from userspace again.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf 2022-02-17

We've added 8 non-merge commits during the last 7 day(s) which contain
a total of 8 files changed, 119 insertions(+), 15 deletions(-).

The main changes are:

1) Add schedule points in map batch ops, from Eric.

2) Fix bpf_msg_push_data with len 0, from Felix.

3) Fix crash due to incorrect copy_map_value, from Kumar.

4) Fix crash due to out of bounds access into reg2btf_ids, from Kumar.

5) Fix a bpf_timer initialization issue with clang, from Yonghong.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Add schedule points in batch ops
  bpf: Fix crash due to out of bounds access into reg2btf_ids.
  selftests: bpf: Check bpf_msg_push_data return value
  bpf: Fix a bpf_timer initialization issue
  bpf: Emit bpf_timer in vmlinux BTF
  selftests/bpf: Add test for bpf_timer overwriting crash
  bpf: Fix crash due to incorrect copy_map_value
  bpf: Do not try bpf_msg_push_data with len 0
====================

Link: https://lore.kernel.org/r/20220217190000.37925-1-alexei.starovoitov@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from wireless and netfilter.

  Current release - regressions:

   - dsa: lantiq_gswip: fix use after free in gswip_remove()

   - smc: avoid overwriting the copies of clcsock callback functions

  Current release - new code bugs:

   - iwlwifi:
      - fix use-after-free when no FW is present
      - mei: fix the pskb_may_pull check in ipv4
      - mei: retry mapping the shared area
      - mvm: don't feed the hardware RFKILL into iwlmei

  Previous releases - regressions:

   - ipv6: mcast: use rcu-safe version of ipv6_get_lladdr()

   - tipc: fix wrong publisher node address in link publications

   - iwlwifi: mvm: don't send SAR GEO command for 3160 devices, avoid FW
     assertion

   - bgmac: make idm and nicpm resource optional again

   - atl1c: fix tx timeout after link flap

  Previous releases - always broken:

   - vsock: remove vsock from connected table when connect is
     interrupted by a signal

   - ping: change destination interface checks to match raw sockets

   - crypto: af_alg - get rid of alg_memory_allocated to avoid confusing
     semantics (and null-deref) after SO_RESERVE_MEM was added

   - ipv6: make exclusive flowlabel checks per-netns

   - bonding: force carrier update when releasing slave

   - sched: limit TC_ACT_REPEAT loops

   - bridge: multicast: notify switchdev driver whenever MC processing
     gets disabled because of max entries reached

   - wifi: brcmfmac: fix crash in brcm_alt_fw_path when WLAN not found

   - iwlwifi: fix locking when "HW not ready"

   - phy: mediatek: remove PHY mode check on MT7531

   - dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN

   - dsa: lan9303:
      - fix polarity of reset during probe
      - fix accelerated VLAN handling"

* tag 'net-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
  bonding: force carrier update when releasing slave
  nfp: flower: netdev offload check for ip6gretap
  ipv6: fix data-race in fib6_info_hw_flags_set / fib6_purge_rt
  ipv4: fix data races in fib_alias_hw_flags_set
  net: dsa: lan9303: add VLAN IDs to master device
  net: dsa: lan9303: handle hwaccel VLAN tags
  vsock: remove vsock from connected table when connect is interrupted by a signal
  Revert "net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname"
  ping: fix the dif and sdif check in ping_lookup
  net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990
  net: sched: limit TC_ACT_REPEAT loops
  tipc: fix wrong notification node addresses
  net: dsa: lantiq_gswip: fix use after free in gswip_remove()
  ipv6: per-netns exclusive flowlabel checks
  net: bridge: multicast: notify switchdev driver whenever MC processing gets disabled
  CDC-NCM: avoid overflow in sanity checking
  mctp: fix use after free
  net: mscc: ocelot: fix use-after-free in ocelot_vlan_del()
  bonding: fix data-races around agg_select_timer
  dpaa2-eth: Initialize mutex used in one step timestamping path
  ...

In __bond_release_one(), bond_set_carrier() is only called when bond
device has no slave. Therefore, if we remove the up slave from a master
with two slaves and keep the down slave, the master will remain up.

Fix this by moving bond_set_carrier() out of if (!bond_has_slaves(bond))
statement.

Reproducer:
$ insmod bonding.ko mode=0 miimon=100 max_bonds=2
$ ifconfig bond0 up
$ ifenslave bond0 eth0 eth1
$ ifconfig eth0 down
$ ifenslave -d bond0 eth1
$ cat /proc/net/bonding/bond0

Fixes: ff59c456

 ("[PATCH] bonding: support carrier state for master")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/1645021088-38370-1-git-send-email-zhangchangzhong@huawei.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot reported various soft lockups caused by bpf batch operations.

 INFO: task kworker/1:1:27 blocked for more than 140 seconds.
 INFO: task hung in rcu_barrier

Nothing prevents batch ops to process huge amount of data,
we need to add schedule points in them.

Note that maybe_wait_bpf_programs(map) calls from
generic_map_delete_batch() can be factorized by moving
the call after the loop.

This will be done later in -next tree once we get this fix merged,
unless there is strong opinion doing this optimization sooner.

Fixes: aa2e93b8 ("bpf: Add generic support for update and delete batch ops")
Fixes: cb4d03ab

 ("bpf: Add generic support for lookup batch op")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Brian Vazquez <brianvv@google.com>
Link: https://lore.kernel.org/bpf/20220217181902.808742-1-eric.dumazet@gmail.com

Commit b42bc9a3 ("Fix regression due to "fs: move binfmt_misc sysctl
to its own file") fixed a regression, however it failed to add a
kmemleak_not_leak().

Fixes: b42bc9a3

 ("Fix regression due to "fs: move binfmt_misc sysctl to its own file")
Reported-by: Tong Zhang <ztong0001@gmail.com>
Cc: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'perf-tools-fixes-for-v5.17-2022-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix corrupt inject files when only last branch option is enabled with
   ARM CoreSight ETM

 - Fix use-after-free for realloc(..., 0) in libsubcmd, found by gcc 12

 - Defer freeing string after possible strlen() on it in the BPF loader,
   found by gcc 12

 - Avoid early exit in 'perf trace' due SIGCHLD from non-workload
   processes

 - Fix arm64 perf_event_attr 'perf test's wrt --call-graph
   initialization

 - Fix libperf 32-bit build for 'perf test' wrt uint64_t printf

 - Fix perf_cpu_map__for_each_cpu macro in libperf, providing access to
   the CPU iterator

 - Sync linux/perf_event.h UAPI with the kernel sources

 - Update Jiri Olsa's email address in MAINTAINERS

* tag 'perf-tools-fixes-for-v5.17-2022-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf bpf: Defer freeing string after possible strlen() on it
  perf test: Fix arm64 perf_event_attr tests wrt --call-graph initialization
  libsubcmd: Fix use-after-free for realloc(..., 0)
  libperf: Fix perf_cpu_map__for_each_cpu macro
  perf cs-etm: Fix corrupt inject files when only last branch option is enabled
  perf cs-etm: No-op refactor of synth opt usage
  libperf: Fix 32-bit build for tests uint64_t printf
  tools headers UAPI: Sync linux/perf_event.h with the kernel sources
  perf trace: Avoid early exit due SIGCHLD from non-workload processes
  MAINTAINERS: Update Jiri's email address

Pull module fix from Luis Chamberlain:
 "Fixes module decompression when CONFIG_SYSFS=n

  The only fix trickled down for v5.17-rc cycle so far is the fix for
  module decompression when CONFIG_SYSFS=n. This was reported through
  0-day"

* tag 'modules-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  module: fix building with sysfs disabled

IPv6 GRE tunnels are not being offloaded, this is caused by a missing
netdev offload check. The functionality of IPv6 GRE tunnel offloading
was previously added but this check was not included. Adding the
ip6gretap check allows IPv6 GRE tunnels to be offloaded correctly.

Fixes: f7536ffb

 ("nfp: flower: Allow ipv6gretap interface for offloading")
Signed-off-by: Danie du Toit <danie.dutoit@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220217124820.40436-1-louis.peens@corigine.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Because fib6_info_hw_flags_set() is called without any synchronization,
all accesses to gi6->offload, fi->trap and fi->offload_failed
need some basic protection like READ_ONCE()/WRITE_ONCE().

BUG: KCSAN: data-race in fib6_info_hw_flags_set / fib6_purge_rt

read to 0xffff8881087d5886 of 1 bytes by task 13953 on cpu 0:
 fib6_drop_pcpu_from net/ipv6/ip6_fib.c:1007 [inline]
 fib6_purge_rt+0x4f/0x580 net/ipv6/ip6_fib.c:1033
 fib6_del_route net/ipv6/ip6_fib.c:1983 [inline]
 fib6_del+0x696/0x890 net/ipv6/ip6_fib.c:2028
 __ip6_del_rt net/ipv6/route.c:3876 [inline]
 ip6_del_rt+0x83/0x140 net/ipv6/route.c:3891
 __ipv6_dev_ac_dec+0x2b5/0x370 net/ipv6/anycast.c:374
 ipv6_dev_ac_dec net/ipv6/anycast.c:387 [inline]
 __ipv6_sock_ac_close+0x141/0x200 net/ipv6/anycast.c:207
 ipv6_sock_ac_close+0x79/0x90 net/ipv6/anycast.c:220
 inet6_release+0x32/0x50 net/ipv6/af_inet6.c:476
 __sock_release net/socket.c:650 [inline]
 sock_close+0x6c/0x150 net/socket.c:1318
 __fput+0x295/0x520 fs/file_table.c:280
 ____fput+0x11/0x20 fs/file_table.c:313
 task_work_run+0x8e/0x110 kernel/task_work.c:164
 tracehook_notify_resume include/linux/tracehook.h:189 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:175 [inline]
 exit_to_user_mode_prepare+0x160/0x190 kernel/entry/common.c:207
 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline]
 syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:300
 do_syscall_64+0x50/0xd0 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x44/0xae

write to 0xffff8881087d5886 of 1 bytes by task 1912 on cpu 1:
 fib6_info_hw_flags_set+0x155/0x3b0 net/ipv6/route.c:6230
 nsim_fib6_rt_hw_flags_set drivers/net/netdevsim/fib.c:668 [inline]
 nsim_fib6_rt_add drivers/net/netdevsim/fib.c:691 [inline]
 nsim_fib6_rt_insert drivers/net/netdevsim/fib.c:756 [inline]
 nsim_fib6_event drivers/net/netdevsim/fib.c:853 [inline]
 nsim_fib_event drivers/net/netdevsim/fib.c:886 [inline]
 nsim_fib_event_work+0x284f/0x2cf0 drivers/net/netdevsim/fib.c:1477
 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
 worker_thread+0x616/0xa70 kernel/workqueue.c:2454
 kthread+0x2c7/0x2e0 kernel/kthread.c:327
 ret_from_fork+0x1f/0x30

value changed: 0x22 -> 0x2a

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 1912 Comm: kworker/1:3 Not tainted 5.16.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events nsim_fib_event_work

Fixes: 0c5fcf9e ("IPv6: Add "offload failed" indication to routes")
Fixes: bb3c4ab9

 ("ipv6: Add "offload" and "trap" indications to routes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Amit Cohen <amcohen@nvidia.com>
Cc: Ido Schimmel <idosch@nvidia.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220216173217.3792411-2-eric.dumazet@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

fib_alias_hw_flags_set() can be used by concurrent threads,
and is only RCU protected.

We need to annotate accesses to following fields of struct fib_alias:

    offload, trap, offload_failed

Because of READ_ONCE()WRITE_ONCE() limitations, make these
field u8.

BUG: KCSAN: data-race in fib_alias_hw_flags_set / fib_alias_hw_flags_set

read to 0xffff888134224a6a of 1 bytes by task 2013 on cpu 1:
 fib_alias_hw_flags_set+0x28a/0x470 net/ipv4/fib_trie.c:1050
 nsim_fib4_rt_hw_flags_set drivers/net/netdevsim/fib.c:350 [inline]
 nsim_fib4_rt_add drivers/net/netdevsim/fib.c:367 [inline]
 nsim_fib4_rt_insert drivers/net/netdevsim/fib.c:429 [inline]
 nsim_fib4_event drivers/net/netdevsim/fib.c:461 [inline]
 nsim_fib_event drivers/net/netdevsim/fib.c:881 [inline]
 nsim_fib_event_work+0x1852/0x2cf0 drivers/net/netdevsim/fib.c:1477
 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
 process_scheduled_works kernel/workqueue.c:2370 [inline]
 worker_thread+0x7df/0xa70 kernel/workqueue.c:2456
 kthread+0x1bf/0x1e0 kernel/kthread.c:377
 ret_from_fork+0x1f/0x30

write to 0xffff888134224a6a of 1 bytes by task 4872 on cpu 0:
 fib_alias_hw_flags_set+0x2d5/0x470 net/ipv4/fib_trie.c:1054
 nsim_fib4_rt_hw_flags_set drivers/net/netdevsim/fib.c:350 [inline]
 nsim_fib4_rt_add drivers/net/netdevsim/fib.c:367 [inline]
 nsim_fib4_rt_insert drivers/net/netdevsim/fib.c:429 [inline]
 nsim_fib4_event drivers/net/netdevsim/fib.c:461 [inline]
 nsim_fib_event drivers/net/netdevsim/fib.c:881 [inline]
 nsim_fib_event_work+0x1852/0x2cf0 drivers/net/netdevsim/fib.c:1477
 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
 process_scheduled_works kernel/workqueue.c:2370 [inline]
 worker_thread+0x7df/0xa70 kernel/workqueue.c:2456
 kthread+0x1bf/0x1e0 kernel/kthread.c:377
 ret_from_fork+0x1f/0x30

value changed: 0x00 -> 0x02

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 4872 Comm: kworker/0:0 Not tainted 5.17.0-rc3-syzkaller-00188-g1d41d2e82623-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events nsim_fib_event_work

Fixes: 90b93f1b

 ("ipv4: Add "offload" and "trap" indications to routes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220216173217.3792411-1-eric.dumazet@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If the master device does VLAN filtering, the IDs used by the switch
must be added for any frames to be received.  Do this in the
port_enable() function, and remove them in port_disable().

Fixes: a1292595

 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Mans Rullgard <mans@mansr.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220216204818.28746-1-mans@mansr.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Check for a hwaccel VLAN tag on rx and use it if present.  Otherwise,
use __skb_vlan_pop() like the other tag parsers do.  This fixes the case
where the VLAN tag has already been consumed by the master.

Fixes: a1292595

 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Mans Rullgard <mans@mansr.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220216124634.23123-1-mans@mansr.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Oded Gabbay reports that enabling NUMA balancing causes corruption with
his Gaudi accelerator test load:

 "All the details are in the bug, but the bottom line is that somehow,
  this patch causes corruption when the numa balancing feature is
  enabled AND we don't use process affinity AND we use GUP to pin pages
  so our accelerator can DMA to/from system memory.

  Either disabling numa balancing, using process affinity to bind to
  specific numa-node or reverting this patch causes the bug to
  disappear"

and Oded bisected the issue to commit 09854ba9 ("mm: do_wp_page()
simplification").

Now, the NUMA balancing shouldn't actually be changing the writability
of a page, and as such shouldn't matter for COW.  But it appears it
does.  Suspicious.

However, regardless of that, the condition for enabling NUMA faults in
change_pte_range() is nonsensical.  It uses "page_mapcount(page)" to
decide if a COW page should be NUMA-protected or not, and that makes
absolutely no sense.

The number of mappings a page has is irrelevant: not only does GUP get a
reference to a page as in Oded's case, but the other mappings migth be
paged out and the only reference to them would be in the page count.

Since we should never try to NUMA-balance a page that we can't move
anyway due to other references, just fix the code to use 'page_count()'.
Oded confirms that that fixes his issue.

Now, this does imply that something in NUMA balancing ends up changing
page protections (other than the obvious one of making the page
inaccessible to get the NUMA faulting information).  Otherwise the COW
simplification wouldn't matter - since doing the GUP on the page would
make sure it's writable.

The cause of that permission change would be good to figure out too,
since it clearly results in spurious COW events - but fixing the
nonsensical test that just happened to work before is obviously the
CorrectThing(tm) to do regardless.

Fixes: 09854ba9 ("mm: do_wp_page() simplification")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215616
Link: https://lore.kernel.org/all/CAFCwf10eNmwq2wD71xjUhqkvv5+_pJMR1nPug2RqNDcFT4H86Q@mail.gmail.com/


Reported-and-tested-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vsock_connect() expects that the socket could already be in the
TCP_ESTABLISHED state when the connecting task wakes up with a signal
pending. If this happens the socket will be in the connected table, and
it is not removed when the socket state is reset. In this situation it's
common for the process to retry connect(), and if the connection is
successful the socket will be added to the connected table a second
time, corrupting the list.

Prevent this by calling vsock_remove_connected() if a signal is received
while waiting for a connection. This is harmless if the socket is not in
the connected table, and if it is in the table then removing it will
prevent list corruption from a double add.

Note for backporting: this patch requires d5afa82c ("vsock: correct
removal of socket from the list"), which is in all current stable trees
except 4.9.y.

Fixes: d021c344

 ("VSOCK: Introduce VM Sockets")
Signed-off-by: Seth Forshee <sforshee@digitalocean.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20220217141312.2297547-1-sforshee@digitalocean.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit 3710e809.

Since idm_base and nicpm_base are still optional resources not present
on all platforms, this breaks the driver for everything except Northstar
2 (which has both).

The same change was already reverted once with 755f5738 ("net:
broadcom: fix a mistake about ioremap resource").

So let's do it again.

Fixes: 3710e809

 ("net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
[florian: Added comments to explain the resources are optional]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220216184634.2032460-1-f.fainelli@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When 'ping' changes to use PING socket instead of RAW socket by:

   # sysctl -w net.ipv4.ping_group_range="0 100"

There is another regression caused when matching sk_bound_dev_if
and dif, RAW socket is using inet_iif() while PING socket lookup
is using skb->dev->ifindex, the cmd below fails due to this:

  # ip link add dummy0 type dummy
  # ip link set dummy0 up
  # ip addr add 192.168.111.1/24 dev dummy0
  # ping -I dummy0 192.168.111.1 -c1

The issue was also reported on:

  https://github.com/iputils/iputils/issues/104

But fixed in iputils in a wrong way by not binding to device when
destination IP is on device, and it will cause some of kselftests
to fail, as Jianlin noticed.

This patch is to use inet(6)_iif and inet(6)_sdif to get dif and
sdif for PING socket, and keep consistent with RAW socket.

Fixes: c319b4d7

 ("net: ipv4: add IPPROTO_ICMP socket kind")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit FN990
0x1071 composition in order to avoid bind error.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This was detected by the gcc in Fedora Rawhide's gcc:

  50    11.01 fedora:rawhide                : FAIL gcc version 12.0.1 20220205 (Red Hat 12.0.1-0) (GCC)
        inlined from 'bpf__config_obj' at util/bpf-loader.c:1242:9:
    util/bpf-loader.c:1225:34: error: pointer 'map_opt' may be used after 'free' [-Werror=use-after-free]
     1225 |                 *key_scan_pos += strlen(map_opt);
          |                                  ^~~~~~~~~~~~~~~
    util/bpf-loader.c:1223:9: note: call to 'free' here
     1223 |         free(map_name);
          |         ^~~~~~~~~~~~~~
    cc1: all warnings being treated as errors

So do the calculations on the pointer before freeing it.

Fixes: 04f9bf2b ("perf bpf-loader: Add missing '*' for key_scan_pos")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/lkml/Yg1VtQxKrPpS3uNA@kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We have been living dangerously, at the mercy of malicious users,
abusing TC_ACT_REPEAT, as shown by this syzpot report [1].

Add an arbitrary limit (32) to the number of times an action can
return TC_ACT_REPEAT.

v2: switch the limit to 32 instead of 10.
    Use net_warn_ratelimited() instead of pr_err_once().

[1] (C repro available on demand)

rcu: INFO: rcu_preempt self-detected stall on CPU
rcu:    1-...!: (10500 ticks this GP) idle=021/1/0x4000000000000000 softirq=5592/5592 fqs=0
        (t=10502 jiffies g=5305 q=190)
rcu: rcu_preempt kthread timer wakeup didn't happen for 10502 jiffies! g5305 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402
rcu:    Possible timer handling issue on cpu=0 timer-softirq=3527
rcu: rcu_preempt kthread starved for 10505 jiffies! g5305 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0
rcu:    Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt     state:I stack:29344 pid:   14 ppid:     2 flags:0x00004000
Call Trace:
 <TASK>
 context_switch kernel/sched/core.c:4986 [inline]
 __schedule+0xab2/0x4db0 kernel/sched/core.c:6295
 schedule+0xd2/0x260 kernel/sched/core.c:6368
 schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881
 rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1963
 rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2136
 kthread+0x2e9/0x3a0 kernel/kthread.c:377
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
 </TASK>
rcu: Stack dump where RCU GP kthread last ran:
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 3646 Comm: syz-executor358 Not tainted 5.17.0-rc3-syzkaller-00149-gbf8e59fd315f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:rep_nop arch/x86/include/asm/vdso/processor.h:13 [inline]
RIP: 0010:cpu_relax arch/x86/include/asm/vdso/processor.h:18 [inline]
RIP: 0010:pv_wait_head_or_lock kernel/locking/qspinlock_paravirt.h:437 [inline]
RIP: 0010:__pv_queued_spin_lock_slowpath+0x3b8/0xb40 kernel/locking/qspinlock.c:508
Code: 48 89 eb c6 45 01 01 41 bc 00 80 00 00 48 c1 e9 03 83 e3 07 41 be 01 00 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8d 2c 01 eb 0c <f3> 90 41 83 ec 01 0f 84 72 04 00 00 41 0f b6 45 00 38 d8 7f 08 84
RSP: 0018:ffffc9000283f1b0 EFLAGS: 00000206
RAX: 0000000000000003 RBX: 0000000000000000 RCX: 1ffff1100fc0071e
RDX: 0000000000000001 RSI: 0000000000000201 RDI: 0000000000000000
RBP: ffff88807e0038f0 R08: 0000000000000001 R09: ffffffff8ffbf9ff
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000004c1e
R13: ffffed100fc0071e R14: 0000000000000001 R15: ffff8880b9c3aa80
FS:  00005555562bf300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffdbfef12b8 CR3: 00000000723c2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 pv_queued_spin_lock_slowpath arch/x86/include/asm/paravirt.h:591 [inline]
 queued_spin_lock_slowpath arch/x86/include/asm/qspinlock.h:51 [inline]
 queued_spin_lock include/asm-generic/qspinlock.h:85 [inline]
 do_raw_spin_lock+0x200/0x2b0 kernel/locking/spinlock_debug.c:115
 spin_lock_bh include/linux/spinlock.h:354 [inline]
 sch_tree_lock include/net/sch_generic.h:610 [inline]
 sch_tree_lock include/net/sch_generic.h:605 [inline]
 prio_tune+0x3b9/0xb50 net/sched/sch_prio.c:211
 prio_init+0x5c/0x80 net/sched/sch_prio.c:244
 qdisc_create.constprop.0+0x44a/0x10f0 net/sched/sch_api.c:1253
 tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660
 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5594
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
 netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343
 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:725
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2413
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2496
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f7ee98aae99
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffdbfef12d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007ffdbfef1300 RCX: 00007f7ee98aae99
RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000003
RBP: 0000000000000000 R08: 000000000000000d R09: 000000000000000d
R10: 000000000000000d R11: 0000000000000246 R12: 00007ffdbfef12f0
R13: 00000000000f4240 R14: 000000000004ca47 R15: 00007ffdbfef12e4
 </TASK>
INFO: NMI handler (nmi_cpu_backtrace_handler) took too long to run: 2.293 msecs
NMI backtrace for cpu 1
CPU: 1 PID: 3260 Comm: kworker/1:3 Not tainted 5.17.0-rc3-syzkaller-00149-gbf8e59fd315f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: mld mld_ifc_work
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 nmi_cpu_backtrace.cold+0x47/0x144 lib/nmi_backtrace.c:111
 nmi_trigger_cpumask_backtrace+0x1b3/0x230 lib/nmi_backtrace.c:62
 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline]
 rcu_dump_cpu_stacks+0x25e/0x3f0 kernel/rcu/tree_stall.h:343
 print_cpu_stall kernel/rcu/tree_stall.h:604 [inline]
 check_cpu_stall kernel/rcu/tree_stall.h:688 [inline]
 rcu_pending kernel/rcu/tree.c:3919 [inline]
 rcu_sched_clock_irq.cold+0x5c/0x759 kernel/rcu/tree.c:2617
 update_process_times+0x16d/0x200 kernel/time/timer.c:1785
 tick_sched_handle+0x9b/0x180 kernel/time/tick-sched.c:226
 tick_sched_timer+0x1b0/0x2d0 kernel/time/tick-sched.c:1428
 __run_hrtimer kernel/time/hrtimer.c:1685 [inline]
 __hrtimer_run_queues+0x1c0/0xe50 kernel/time/hrtimer.c:1749
 hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811
 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline]
 __sysvec_apic_timer_interrupt+0x146/0x530 arch/x86/kernel/apic/apic.c:1103
 sysvec_apic_timer_interrupt+0x8e/0xc0 arch/x86/kernel/apic/apic.c:1097
 </IRQ>
 <TASK>
 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638
RIP: 0010:__sanitizer_cov_trace_const_cmp4+0xc/0x70 kernel/kcov.c:286
Code: 00 00 00 48 89 7c 30 e8 48 89 4c 30 f0 4c 89 54 d8 20 48 89 10 5b c3 0f 1f 80 00 00 00 00 41 89 f8 bf 03 00 00 00 4c 8b 14 24 <89> f1 65 48 8b 34 25 00 70 02 00 e8 14 f9 ff ff 84 c0 74 4b 48 8b
RSP: 0018:ffffc90002c5eea8 EFLAGS: 00000246
RAX: 0000000000000007 RBX: ffff88801c625800 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: ffff8880137d3100 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff874fcd88 R11: 0000000000000000 R12: ffff88801d692dc0
R13: ffff8880137d3104 R14: 0000000000000000 R15: ffff88801d692de8
 tcf_police_act+0x358/0x11d0 net/sched/act_police.c:256
 tcf_action_exec net/sched/act_api.c:1049 [inline]
 tcf_action_exec+0x1a6/0x530 net/sched/act_api.c:1026
 tcf_exts_exec include/net/pkt_cls.h:326 [inline]
 route4_classify+0xef0/0x1400 net/sched/cls_route.c:179
 __tcf_classify net/sched/cls_api.c:1549 [inline]
 tcf_classify+0x3e8/0x9d0 net/sched/cls_api.c:1615
 prio_classify net/sched/sch_prio.c:42 [inline]
 prio_enqueue+0x3a7/0x790 net/sched/sch_prio.c:75
 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3668
 __dev_xmit_skb net/core/dev.c:3756 [inline]
 __dev_queue_xmit+0x1f61/0x3660 net/core/dev.c:4081
 neigh_hh_output include/net/neighbour.h:533 [inline]
 neigh_output include/net/neighbour.h:547 [inline]
 ip_finish_output2+0x14dc/0x2170 net/ipv4/ip_output.c:228
 __ip_finish_output net/ipv4/ip_output.c:306 [inline]
 __ip_finish_output+0x396/0x650 net/ipv4/ip_output.c:288
 ip_finish_output+0x32/0x200 net/ipv4/ip_output.c:316
 NF_HOOK_COND include/linux/netfilter.h:296 [inline]
 ip_output+0x196/0x310 net/ipv4/ip_output.c:430
 dst_output include/net/dst.h:451 [inline]
 ip_local_out+0xaf/0x1a0 net/ipv4/ip_output.c:126
 iptunnel_xmit+0x628/0xa50 net/ipv4/ip_tunnel_core.c:82
 geneve_xmit_skb drivers/net/geneve.c:966 [inline]
 geneve_xmit+0x10c8/0x3530 drivers/net/geneve.c:1077
 __netdev_start_xmit include/linux/netdevice.h:4683 [inline]
 netdev_start_xmit include/linux/netdevice.h:4697 [inline]
 xmit_one net/core/dev.c:3473 [inline]
 dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3489
 __dev_queue_xmit+0x2985/0x3660 net/core/dev.c:4116
 neigh_hh_output include/net/neighbour.h:533 [inline]
 neigh_output include/net/neighbour.h:547 [inline]
 ip6_finish_output2+0xf7a/0x14f0 net/ipv6/ip6_output.c:126
 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline]
 __ip6_finish_output+0x61e/0xe90 net/ipv6/ip6_output.c:170
 ip6_finish_output+0x32/0x200 net/ipv6/ip6_output.c:201
 NF_HOOK_COND include/linux/netfilter.h:296 [inline]
 ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:224
 dst_output include/net/dst.h:451 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 NF_HOOK include/linux/netfilter.h:301 [inline]
 mld_sendpack+0x9a3/0xe40 net/ipv6/mcast.c:1826
 mld_send_cr net/ipv6/mcast.c:2127 [inline]
 mld_ifc_work+0x71c/0xdc0 net/ipv6/mcast.c:2659
 process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307
 worker_thread+0x657/0x1110 kernel/workqueue.c:2454
 kthread+0x2e9/0x3a0 kernel/kthread.c:377
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
 </TASK>
----------------
Code disassembly (best guess):
   0:   48 89 eb                mov    %rbp,%rbx
   3:   c6 45 01 01             movb   $0x1,0x1(%rbp)
   7:   41 bc 00 80 00 00       mov    $0x8000,%r12d
   d:   48 c1 e9 03             shr    $0x3,%rcx
  11:   83 e3 07                and    $0x7,%ebx
  14:   41 be 01 00 00 00       mov    $0x1,%r14d
  1a:   48 b8 00 00 00 00 00    movabs $0xdffffc0000000000,%rax
  21:   fc ff df
  24:   4c 8d 2c 01             lea    (%rcx,%rax,1),%r13
  28:   eb 0c                   jmp    0x36
* 2a:   f3 90                   pause <-- trapping instruction
  2c:   41 83 ec 01             sub    $0x1,%r12d
  30:   0f 84 72 04 00 00       je     0x4a8
  36:   41 0f b6 45 00          movzbl 0x0(%r13),%eax
  3b:   38 d8                   cmp    %bl,%al
  3d:   7f 08                   jg     0x47
  3f:   84                      .byte 0x84

Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220215235305.3272331-1-eric.dumazet@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The previous bug fix had an unfortunate side effect that broke
distribution of binding table entries between nodes. The updated
tipc_sock_addr struct is also used further down in the same
function, and there the old value is still the correct one.

Fixes: 032062f3

 ("tipc: fix wrong publisher node address in link publications")
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Link: https://lore.kernel.org/r/20220216020009.3404578-1-jmaloy@redhat.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

of_node_put(priv->ds->slave_mii_bus->dev.of_node) should be
done before mdiobus_free(priv->ds->slave_mii_bus).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 0d120dfb

 ("net: dsa: lantiq_gswip: don't use devres for mdiobus")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/1644921768-26477-1-git-send-email-khoroshilov@ispras.ru


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ipv6 flowlabels historically require a reservation before use.
Optionally in exclusive mode (e.g., user-private).

Commit 59c820b2 ("ipv6: elide flowlabel check if no exclusive
leases exist") introduced a fastpath that avoids this check when no
exclusive leases exist in the system, and thus any flowlabel use
will be granted.

That allows skipping the control operation to reserve a flowlabel
entirely. Though with a warning if the fast path fails:

  This is an optimization. Robust applications still have to revert to
  requesting leases if the fast path fails due to an exclusive lease.

Still, this is subtle. Better isolate network namespaces from each
other. Flowlabels are per-netns. Also record per-netns whether
exclusive leases are in use. Then behavior does not change based on
activity in other netns.

Changes
  v2
    - wrap in IS_ENABLED(CONFIG_IPV6) to avoid breakage if disabled

Fixes: 59c820b2 ("ipv6: elide flowlabel check if no exclusive leases exist")
Link: https://lore.kernel.org/netdev/MWHPR2201MB1072BCCCFCE779E4094837ACD0329@MWHPR2201MB1072.namprd22.prod.outlook.com/


Reported-by: Congyu Liu <liu3101@purdue.edu>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Tested-by: Congyu Liu <liu3101@purdue.edu>
Link: https://lore.kernel.org/r/20220215160037.1976072-1-willemdebruijn.kernel@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Whenever bridge driver hits the max capacity of MDBs, it disables
the MC processing (by setting corresponding bridge option), but never
notifies switchdev about such change (the notifiers are called only upon
explicit setting of this option, through the registered netlink interface).

This could lead to situation when Software MDB processing gets disabled,
but this event never gets offloaded to the underlying Hardware.

Fix this by adding a notify message in such case.

Fixes: 147c1e9b

 ("switchdev: bridge: Offload multicast disabled")
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20220215165303.31908-1-oleksandr.mazur@plvision.eu


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Sysfs support might be disabled so we need to guard the code that
instantiates "compression" attribute with an #ifdef.

Fixes: b1ae6dc4

 ("module: add in-kernel support for decompressing")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>

When commit e6ac2450 ("bpf: Support bpf program calling kernel function") added
kfunc support, it defined reg2btf_ids as a cheap way to translate the verifier
reg type to the appropriate btf_vmlinux BTF ID, however
commit c25b2ae1 ("bpf: Replace PTR_TO_XXX_OR_NULL with PTR_TO_XXX | PTR_MAYBE_NULL")
moved the __BPF_REG_TYPE_MAX from the last member of bpf_reg_type enum to after
the base register types, and defined other variants using type flag
composition. However, now, the direct usage of reg->type to index into
reg2btf_ids may no longer fall into __BPF_REG_TYPE_MAX range, and hence lead to
out of bounds access and kernel crash on dereference of bad pointer.

Fixes: c25b2ae1

 ("bpf: Replace PTR_TO_XXX_OR_NULL with PTR_TO_XXX | PTR_MAYBE_NULL")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220216201943.624869-1-memxor@gmail.com

Pull MMC fix from Ulf Hansson:
 "Fix recovery logic for multi block I/O reads (MMC_READ_MULTIPLE_BLOCK)"

* tag 'mmc-v5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: block: fix read single on recovery logic

Daniel Gibson reports that the n_tty code gets line termination wrong in
very specific cases:

 "If you feed a line with exactly 64 chars + terminating newline, and
  directly afterwards (without reading) another line into a pseudo
  terminal, the the first read() on the other side will return the 64
  char line *without* terminating newline, and the next read() will
  return the missing terminating newline AND the complete next line (if
  it fits in the buffer)"

and bisected the behavior to commit 3b830a9c ("tty: convert
tty_ldisc_ops 'read()' function to take a kernel pointer").

Now, digging deeper, it turns out that the behavior isn't exactly new:
what changed in commit 3b830a9c was that the tty line discipline
.read() function is now passed an intermediate kernel buffer rather than
the final user space buffer.

And that intermediate kernel buffer is 64 bytes in size - thus that
special case with exactly 64 bytes plus terminating newline.

The same problem did exist before, but historically the boundary was not
the 64-byte chunk, but the user-supplied buffer size, which is obviously
generally bigger (and potentially bigger than N_TTY_BUF_SIZE, which
would hide the issue entirely).

The reason is that the n_tty canon_copy_from_read_buf() code would look
ahead for the EOL character one byte further than it would actually
copy.  It would then decide that it had found the terminator, and unmark
it as an EOL character - which in turn explains why the next read
wouldn't then be terminated by it.

Now, the reason it did all this in the first place is related to some
historical and pretty obscure EOF behavior, see commit ac8f3bf8
("n_tty: Fix poll() after buffer-limited eof push read") and commit
40d5e090 ("n_tty: Fix EOF push handling").

And the reason for the EOL confusion is that we treat EOF as a special
EOL condition, with the EOL character being NUL (aka "__DISABLED_CHAR"
in the kernel sources).

So that EOF look-ahead also affects the normal EOL handling.

This patch just removes the look-ahead that causes problems, because EOL
is much more critical than the historical "EOF in the middle of a line
that coincides with the end of the buffer" handling ever was.

Now, it is possible that we should indeed re-introduce the "look at next
character to see if it's a EOF" behavior, but if so, that should be done
not at the kernel buffer chunk boundary in canon_copy_from_read_buf(),
but at a higher level, when we run out of the user buffer.

In particular, the place to do that would be at the top of
'n_tty_read()', where we check if it's a continuation of a previously
started read, and there is no more buffer space left, we could decide to
just eat the __DISABLED_CHAR at that point.

But that would be a separate patch, because I suspect nobody actually
cares, and I'd like to get a report about it before bothering.

Fixes: 3b830a9c ("tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer")
Fixes: ac8f3bf8 ("n_tty: Fix  poll() after buffer-limited eof push read")
Fixes: 40d5e090 ("n_tty: Fix EOF push handling")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215611


Reported-and-tested-by: Daniel Gibson <metalcaedes@gmail.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The struct perf_event_attr is initialised differently in Arm64 when
recording in call-graph fp mode, so update the relevant tests, and add
two extra arm64-only tests.

Before:

  $ perf test 17 -v
  17: Setup struct perf_event_attr
  [...]
  running './tests/attr/test-record-graph-default'
  expected sample_type=295, got 4391
  expected sample_regs_user=0, got 1073741824
  FAILED './tests/attr/test-record-graph-default' - match failure
  test child finished with -1
  ---- end ----

After:

[...]
  running './tests/attr/test-record-graph-default-aarch64'
  test limitation 'aarch64'
  running './tests/attr/test-record-graph-fp-aarch64'
  test limitation 'aarch64'
  running './tests/attr/test-record-graph-default'
  test limitation '!aarch64'
  excluded architecture list ['aarch64']
  skipped [aarch64] './tests/attr/test-record-graph-default'
  running './tests/attr/test-record-graph-fp'
  test limitation '!aarch64'
  excluded architecture list ['aarch64']
  skipped [aarch64] './tests/attr/test-record-graph-fp'
[...]

Fixes: 7248e308

 ("perf tools: Record ARM64 LR register automatically")
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Truong <alexandre.truong@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20220125104435.2737-1-german.gomez@arm.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

GCC 12 correctly reports a potential use-after-free condition in the
xrealloc helper. Fix the warning by avoiding an implicit "free(ptr)"
when size == 0:

In file included from help.c:12:
In function 'xrealloc',
    inlined from 'add_cmdname' at help.c:24:2: subcmd-util.h:56:23: error: pointer may be used after 'realloc' [-Werror=use-after-free]
   56 |                 ret = realloc(ptr, size);
      |                       ^~~~~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
   52 |         void *ret = realloc(ptr, size);
      |                     ^~~~~~~~~~~~~~~~~~
subcmd-util.h:58:31: error: pointer may be used after 'realloc' [-Werror=use-after-free]
   58 |                         ret = realloc(ptr, 1);
      |                               ^~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
   52 |         void *ret = realloc(ptr, size);
      |                     ^~~~~~~~~~~~~~~~~~

Fixes: 2f4ce5ec

 ("perf tools: Finalize subcmd independence")
Reported-by: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Kees Kook <keescook@chromium.org>
Tested-by: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: linux-hardening@vger.kernel.org
Cc: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Link: http://lore.kernel.org/lkml/20220213182443.4037039-1-keescook@chromium.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Tzvetomir Stoyanov reported an issue with using macro
perf_cpu_map__for_each_cpu using private perf_cpu object.

The issue is caused by recent change that wrapped cpu in struct perf_cpu
to distinguish it from cpu indexes. We need to make struct perf_cpu
public.

Add a simple test for using the perf_cpu_map__for_each_cpu macro.

Fixes: 6d18804b

 ("perf cpumap: Give CPUs their own type")
Reported-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220215153713.31395-1-jolsa@kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

'perf inject' with Coresight data generates files that cannot be opened
when only the last branch option is specified:

  perf inject -i perf.data --itrace=l -o inject.data
  perf script -i inject.data
  0x33faa8 [0x8]: failed to process type: 9 [Bad address]

This is because cs_etm__synth_instruction_sample() is called even when
the sample type for instructions hasn't been setup. Last branch records
are attached to instruction samples so it doesn't make sense to generate
them when --itrace=i isn't specified anyway.

This change disables all calls of cs_etm__synth_instruction_sample()
unless --itrace=i is specified, resulting in a file with no samples if
only --itrace=l is provided, rather than a bad file.

Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220210200620.1227232-2-james.clark@arm.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

sample_branches and sample_instructions are already saved in the
synth_opts struct. Other usages like synth_opts.last_branch don't save a
value, so make this more consistent by always going through synth_opts
and not saving duplicate values.

Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220210200620.1227232-1-james.clark@arm.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Commit a7f3713f ("libperf tests: Add test_stat_multiplexing test")
added printf's of 64-bit ints using %lu which doesn't work on 32-bit
builds:

  tests/test-evlist.c:529:29: error: format ‘%lu’ expects argument of type \
    ‘long unsigned int’, but argument 4 has type ‘uint64_t’ {aka ‘long long unsigned int’} [-Werror=format=]

Use PRIu64 instead which works on both 32-bit and 64-bit systems.

Fixes: a7f3713f

 ("libperf tests: Add test_stat_multiplexing test")
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Link: https://lore.kernel.org/r/20220201213903.699656-1-robh@kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the trivial change in:

  ddecd228 ("perf: uapi: Document perf_event_attr::sig_data truncation on 32 bit architectures")

Just adds a comment.

This silences this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
  diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h

Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>