Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt64

Amlogic DT changes for 64-bit platforms for v4.10

Support for new drivers:
- USB
- i2c
- SPI
- mailbox/MHU
- PWM
- ethernet MAC, PHY
- secure monitor
- IR
- watchdog

* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic

: (27 commits)
  ARM64: dts: meson-gxbb-vega-s95: Add SD/SDIO/MMC and PWM nodes
  ARM64: dts: meson-gxl-s905x: Enable internal ethernet PHY
  ARM64: dts: meson-gxl-p23x: Enable ethernet
  ARM64: dts: meson-gxl: Add ethernet nodes with internal PHY
  ARM64: dts: amlogic: Reorder copyrights for meson-gx
  ARM64: dts: meson-gxl-p23x: Enable IR receiver
  ARM64: dts: meson-gxl-p23x: Add SD/SDIO/MMC and PWM nodes
  ARM64: dts: meson-gxl-p23x: Add uart pinctrl
  ARM64: dts: meson-gxl: Add MMC/SD/SDIO nodes
  ARM64: dts: meson-gxl: Add i2c nodes
  ARM64: dts: meson-gxl: Add clock nodes
  ARM64: dts: meson-gxl: Add pinctrl nodes
  ARM64: dts: meson-gxbb: Move common nodes to meson-gx
  ARM64: dts: meson-gxbb: Add SCPI with cpufreq & sensors Nodes
  ARM64: dts: meson-gxbb: Add SRAM node
  ARM64: dts: meson-gxbb: Add MMC nodes to Nexbox A95x
  ARM64: dts: meson-gxbb: Add P20x Wifi SDIO support
  ARM64: dts: meson-gxbb: Add Wifi 32K clock for p20x boards
  ARM64: dts: meson-gxbb: add MMC support
  ARM64: dts: meson-gxbb-odroidc2: Enable USB Nodes
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-dt64-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt64

Allwinner arm64 DT changes for 4.10

Support for the Allwinner A64, their first armv8 SoC.

* tag 'sunxi-dt64-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux

:
  arm64: dts: add Pine64 support
  Documentation: devicetree: add vendor prefix for Pine64
  arm64: dts: add Allwinner A64 SoC .dtsi

Signed-off-by: Olof Johansson <olof@lixom.net>

ARM64: DT: Hisilicon SoC DT updates for 4.10

- Correct the hardware pin number of the usb node on the Hip06
- Add the Hisilicon Hip07 D05 board dts binding
- Add the initial dts for the Hip07 D05 board
- Fix the warning for the node without reg propery on the Hip06
- Fix the sas am max transmissions quirk property on the Hip06
- Disable the sas0 and sas2 on D03 board
- Add refclk node for SAS on the Hip06

* tag 'hisi-arm64-dt-4.10' of git://github.com/hisilicon/linux-hisi

:
  arm64: dts: hisi: add refclk node to hip06 dts files for SAS
  arm64: dts: hisi: disable sas0 and sas2 for d03
  arm64: dts: hisi: fix hip06 sas am-max-trans quirk
  arm64: dts: hip06: Fix no reg property warning
  arm64: dts: hisilicon: Add initial dts for Hip07 D05 board
  Documentation: arm64: Add Hisilicon Hip07 D05 dts binding
  arm64: dts: hip06: Correct hardware pin number of usb node

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-dt64-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64

Freescale arm64 device tree updates for 4.10:
 - Enable Thermal Monitoring Unit (TMU) for thermal management on
   LS1043A and LS2080A.
 - Add support for LS1046A SoC, which has similar peripherals as
   LS1043A but integrates 4 A72 cores.
 - Add two LS1046A based board support: LS1046A-QDS and LS1046A-RDB.

* tag 'imx-dt64-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux

:
  arm64: dts: ls2080a: Add TMU device tree support for LS2080A
  arm64: dts: ls1043a: Add TMU device tree support for LS1043A
  arm64: dts: add LS1046A-QDS board support
  Documentation: DT: Add entry for QorIQ LS1046A-QDS board
  arm64: dts: add LS1046A-RDB board support
  Documentation: DT: Add entry for QorIQ LS1046A-RDB board
  arm64: dts: add QorIQ LS1046A SoC support
  dt-bindings: ahci-fsl-qoriq: updated for SoC ls1046a
  dt-bindings: qoriq-clock: add LS1043A/LS1046A/LS2080A compatible for clockgen
  dt-bindings: i2c: adds two more nxp devices
  dt-bindings: fsl: add LS1043A/LS1046A/LS2080A compatible for SCFG and DCFG
  dt-bindings: fsl: Add LS1043A/LS1046A/LS2080A SoC compatible strings

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-arm64-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt64

Qualcomm ARM64 Updates for v4.10

* Add Hexagon SMD/PIL nodes
* Add DB820c PMIC pins
* Fixup APQ8016 voltage ranges
* Add various MSM8996 nodes to support SMD/SMEM/SMP2P
* Add support for Huawei Nexus 6P (Angler)
* Add support for LG Nexus 5x (Bullhead)

* tag 'qcom-arm64-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux

:
  arm64: dts: msm8994 SoC and Huawei Angler (Nexus 6P) support
  dt-bindings: qcom: Add msm899(2/4) bindings
  arm64: dts: msm8992 SoC and LG Bullhead (Nexus 5X) support
  arm64: dts: msm8996: Add SMP2P and APCS nodes
  arm64: dts: msm8996: Add SMEM DT nodes
  arm64: dts: msm8996: Add reserve-memory nodes
  arm64: dts: msm8996: Add SMEM reserve-memory node
  arm64: dts: apq8016-sbc: add analog audio support with multicodec
  arm64: dts: qcom: Add missing interrupt entry for pm8994 gpios
  arm64: dts: apq8016-sbc: Set up LDO2, LDO6 and LDO17 regulator voltage ranges
  dts: arm64: db820c: add pmic pins specific dts file
  arm64: dts: qcom: msm8916: Add Hexagon PIL node
  arm64: dts: qcom: msm8916: Add Hexagon SMD edge

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge branch 'clk-qcom-8994' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux into next/dt64

* 'clk-qcom-8994' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: qcom: Add support for msm8994 global clock controller
  dt-bindings: qcom: clocks: Add msm8994 clock bindings

Merge tag 'v4.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64

64bit devicetree changes including the px5 evaluation board
a fix for wrong i2c registers on rk3368 a new nvmem cell and
power-domain on rk3399 as well as moving mmc frequency
properties to the more generic max-frequency one.

* tag 'v4.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip

:
  arm64: dts: rockchip: replace to "max-frequency" instead of "clock-freq-min-max"
  arm64: dts: rockchip: add cpu-id nvmem cell node for rk3399
  arm64: dts: rockchip: add sdmmc support for px5-evb
  arm64: dts: rockchip: Add more properties for emmc on px5-evb
  arm64: dts: rockchip: Add PX5 Evaluation board
  arm64: dts: rockchip: add powerdomain for typec on rk3399
  arm64: dts: rockchip: fix i2c resource error of rk3368

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-dt64-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64

Finally, I am really pleased to announce adding support for Exynos5433 ARMv8
SoC along with two boards.  A lot of Samsung people contributed into this
but the final work and commits were done by Chanwoo Choi.

This means that for v4.10 we got:
1. Exynos5433 DTSI.
2. Two boards: TM2 and TM2E.  These are (almost fully) working mobile phones.

* tag 'samsung-dt64-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux

:
  arm64: dts: exynos: Add dts file for Exynos5433-based TM2E board
  arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board
  arm64: dts: exynos: Add dtsi files for Samsung Exynos5433 64bit SoC

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'uniphier-dt64-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt64

UniPhier ARM64 SoC DT updates for v4.10

- Switch CPU enable-method from spin-table to PSCI
- Add OPP tables to support generic cpufreq driver
- Misc fixes

* tag 'uniphier-dt64-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier

:
  arm64: dts: uniphier: make compatible of syscon nodes SoC-specific
  arm64: dts: uniphier: add CPU clocks and OPP tables for LD20 SoC
  arm64: dts: uniphier: add CPU clock and OPP table for LD11 SoC
  arm64: dts: uniphier: increase register region size of sysctrl node
  arm64: dts: uniphier: switch over to PSCI enable method

Signed-off-by: Olof Johansson <olof@lixom.net>

Linux 4.9-rc3

* tag 'v4.9-rc3': (292 commits)
  Linux 4.9-rc3
  x86/smpboot: Init apic mapping before usage
  ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region()
  ACPICA: Dispatcher: Fix an unbalanced lock exit path in acpi_ds_auto_serialize_method()
  ACPICA: Dispatcher: Fix order issue of method termination
  ARC: module: print pretty section names
  ARC: module: elide loop to save reference to .eh_frame
  ARC: mm: retire ARC_DBG_TLB_MISS_COUNT...
  ARC: build: retire old toggles
  ARC: boot log: refactor cpu name/release printing
  ARC: boot log: remove awkward space comma from MMU line
  ARC: boot log: don't assume SWAPE instruction support
  ARC: boot log: refactor printing abt features not captured in BCRs
  ARCv2: boot log: print IOC exists as well as enabled status
  ubifs: Fix regression in ubifs_readdir()
  ubi: fastmap: Fix add_vol() return value test in ubi_attach_fastmap()
  MAINTAINERS: Add entry for genwqe driver
  VMCI: Doorbell create and destroy fixes
  GenWQE: Fix bad page access during abort of resource allocation
  vme: vme_get_size potentially returning incorrect value on failure
  ...

Merge tag 'renesas-arm64-dt-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64

Renesas ARM64 Based SoC DT Updates for v4.10

Enablement:
* Enable On-board eMMC
* Enable SDHI 0 & 3 with UHS
* Add SYS-DMAC controller nodes to r8a7796 SoC
* Populate EXTALR on r8a7796/salvator-x board; used by watchdog
* Add DU LVDS output endpoint on r8a7795/salvator-x board
* Add bias setting for USB1 pins on r8a7795/salvator-x board

Clean-Up:
* Remove FCP SoC-specific compatible strings

* tag 'renesas-arm64-dt-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas

:
  arm64: renesas: r8a7796: add SYS-DMAC controller nodes
  arm64: dts: r8a7795: salvator-x: add bias setting for usb1_pins
  arm64: dts: r8a7796: salvator: enable on board eMMC
  arm64: dts: r8a7795: salvator: enable on-board eMMC
  arm64: dts: r8a7796: salvator-x: enable UHS for SDHI 0 & 3
  arm64: dts: r8a7796: salvator-x: enable SDHI0 & 3
  arm64: dts: r8a7796: add SDHI nodes
  arm64: dts: r8a7795: Remove FCP SoC-specific compatible strings
  dt-bindings: media: renesas-fcp: Remove SoC-specific compatible strings
  arm64: dts: r8a7795: salvator-x: Add DU LVDS output endpoint
  arm64: dts: r8a7796: salvator-x: Populate EXTALR
  arm64: dts: r8a7795: salvator-x: enable UHS for SDHI 0 & 3

Signed-off-by: Olof Johansson <olof@lixom.net>

All boards from the Tronsmart Vega S95 series are sharing similar MMC
based hardware.
sd_emmc_a is used to connect a Broadcom based SDIO wifi card (supported
by the brcmfmac driver). The 32.768KHz LPO clock for the wifi chip is
generated by PWM_E.
sd_emmc_b is routed to the SD-card. Unlike p20x there is no GPIO
regulator, meaning it only supports 3.3V (which seems to be hard-wired).
The eMMC chip is connected to sd_emmc_c and is implemented similar to
the meson-gxbb-p20x boards (meaning that hard-wired fixed regulators
are used).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Enable Ethernet on the p23x board, pinctrl attribute is only added for
the p230 board since the p231 only uses the Internal PHY.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Add Ethernet node with Internal PHY selection for the Amlogic GXL SoCs

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

meson-gx.dtsi was directly derived from meson-gxbb.dtsi, so keep the
copyrights in chronological order to not give a wrong impression.

Fixes: c328666d

 ("ARM64: dts: amlogic: Add Meson GX dtsi from GXBB")
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Enable the Infraread Receiver on the p23x board.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Add SD/SDIO/MMC nodes and PWM 32768Hz clock configuration to provide
storage and WiFi functionality on the p23x boards.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Add pinctrl attribute to p23x uart node.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Add MMC/SD/SDIO nodes clock attributes for Amlogic Meson GXL.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Add i2c nodes clock attributes for Amlogic Meson GXL.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Add clock node for Amlogic Meson GXL.
The GXBB compatible is retained since the GXBB clock tree is used for now.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Add pinctrl nodes and pin definitions for Amlogic Meson GXL.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[khilman: use GXBB include until GXL pinctrl support merged]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Move common nodes between GXBB and GXL in to the common GX dtsi.
Leave the clock attributes in the GXBB dtsi for now.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

We will only maintain 1 dts for D03 and there are 50MHz
and 66MHz versions of D03: so we expect UEFI to update
refclk rate in the fdt at boot time.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

The SAS nodes sas0 and sas2 are not available on d03, so
disable them.

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

The string for the am max transmissions quirk property
is not correct -> fix it.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Warning (unit_address_vs_reg): Node /soc/ethernet@4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /soc/ethernet@5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /soc/ethernet@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /soc/ethernet@1 has a unit name, but no reg property

Fix warning when build with W=1.

Cc: Kejian Yan <yankejian@huawei.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Adding initial dt file for Hip07 D05 board, it is with dual socket
and each socket has two SCCLs(supper cpu cluster), one SCCL contains
four clusters and each cluster has quard Cortex-A72.

Since each SCCL has their own DDR controller, it could be treated as
a separate numa node. Thus, there are four numa nodes(one node with
sixteen core) on Hip07 SoC.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

This patch adds documentation for the devicetree bindings used by
the DT files of Hisilicon Hip07 D05 board.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

The ohci/ehci hardware pin number should be 640/641, correct them.

Fixes: commit aa8d3e74

 ("arm64: dts: Add initial dts for Hisilicon Hip06 D03 board")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Also add nodes and properties for thermal management support.

Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Also add nodes and properties for thermal management support.

Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Initial device tree support for Qualcomm MSM8994 SoC and
Huawei Angler / Google Nexus 6P support.

The device tree is based on the Google 3.10 kernel tree.

The device can be booted into the initrd with only one CPU running.

Signed-off-by: Bastian Köcher <mail@kchr.de>
[jeremymc@redhat.com: removed Kconfig, defconfig, move from Huawei to qcom dir]
Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

Initial device tree support for Qualcomm MSM8992 SoC and
LG Bullhead / Google Nexus 5X support.

Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

Add SMP2P and APCS DT nodes required for Qualcomm ADSP
Peripheral Image Loader.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

Add SMEM and TCSR DT nodes on MSM8996.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

Add reserve-memory nodes required for Qualcomm
Peripheral Image Loaders

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>