Lazy CRC quirk: Implemented retrying mechanisms for SD SSR and SCR, disa...

when something goes wrong, a flood of these messages can be
generated by usbnet (thousands per second).  This doesn't
generally *help* the condition so this patch ratelimits the
rate of their generation.

There's an underlying problem in usbnet's kevent deferral
mechanism which needs fixing, specifically that events *can*
get dropped and not handled.  This patch doesn't address this,
but just mitigates fallout caused by the current implemention.

Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Lazy CRC quirk: Implemented retrying mechanisms for SD SSR and SCR, disabled missing_status and spurious CRC ACMD51 quirks by default (should be fixed by the retrying-mechanishm)

lirc: added support for RaspberryPi GPIO

smsc95xx updates for Raspberry Pi

f7b29271

 introduced tx checksum offload support for smsc95xx,
and enabled it by default. This feature doesn't take
endianness into account, so causes most tx to fail on
those platforms.

This patch fixes the problem fully by adding the missing
conversion.

An alternate workaround is to disable TX checksum offload
on those platforms. The cpu impact of this feature is very low.

Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch enables wake from system suspend on magic packet.

Patch updated to replace BUG_ON with WARN_ON_ONCE and return.

Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch enables the device to enter its lowest power SUSPEND2
state during system suspend, instead of staying up using full power.

Patch updated to not add two pointers to .suspend & .resume.

Patch updated to replace BUG_ON with WARN_ON_ONCE and return.

Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes an issue on some systems, where after suspend the
link is re-established but the ethernet interface does not resume.

Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds additional checks of the values returned by
smsc95xx_(read|write)_reg, and wraps their common patterns
in macros.

Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Removes unnecessary variables as smsc95xx_write_reg takes its
value by parameter.  Early versions passed this parameter by
reference.

Also replace hardcoded interrupt status value with a #define

Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

During init, the device reset is unexpected to complete immediately,
so sleep before testing the condition rather than after it.

Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

"retval" has to be a signed integer for the error handling to work.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Inspired by implementation in smsc911x.c and smsc9420.c
Tested on ARM/pandaboard running android

Signed-off-by: Emeric Vigier <emeric.vigier@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The bcm2708 SPI driver's bcm2708_process_transfer() was ignoring the
per-transfer speed_hz value even when it was provided (it always just
used the spi device's max_speed_hz value).  Now, per-transfer speed_hz
values are respected.

Also added debug print to bcm2708_setup_state() to help keep an eye on
the configured SPI parameters.

Signed-off-by: Kamal Mostafa <kamal@whence.com>

Revert "Move to version 5 of VCHIQ. Note: this requires a corresponding start.elf and /opt/vc/lib update"

This reverts commit eb0c5608.

This reverts commit a542809e.

This reverts commit 63bbe8a3.

This reverts commit 22cb6e26.

This reverts commit 8bccc7a0.

This reverts commit 7aa8d823.

fix build with CONFIG_BCM2708_VCHIQ is disabled

Allow the number of cycles delay between sdcard peripheral writes to be specified on command line with sdhci-bcm2708.cycle_delay