Merge series from Mauro Carvalho Chehab <mchehab@kernel.org>:

Huawei Matebook D15 uses two different GPIOs are used to control the output:

	- gpio0 controls the speaker output;
	- gpio1 controls the headphone output.

Changing both at the same time cause spurious events that are mis-interpreted
as input events, causing troubles on apps. So, a delay is needed before turning
on such gpios.

Also, the headset microphone is connected to MIC1, instead of MIC2 port.

With this patch, plugging a headphone causes a jack event to trigger the speaker
supply, powering down the speaker and powering up the headphone output.
Removing the headphone also triggers the power supply, powering up the speaker
and powering down the headphone.

The headset microphone also works.

Based on experimental tests, Huawei Matebook D15 actually uses
both gpio0 and gpio1: the first one controls the speaker, while
the other one controls the headphone.

Also, the headset is mapped as MIC1, instead of MIC2.

So, add a quirk for it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/d678aef9fc9a07aced611aa7cb8c9b800c649e5a.1649357263.git.mchehab@kernel.org


Signed-off-by: Mark Brown <broonie@kernel.org>

The headset/internal mic can either be routed as mic1/mic2
or vice-versa.

By default, the driver assumes that the headset is mapped as
mic2, but not all devices map this way.

So, add a quirk to support changing it to mic1, using mic2
for the internal analog mic (if any).

Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/5d88fc29b79be7ab77dae391c8e5ee929fd36c27.1649357263.git.mchehab@kernel.org


Signed-off-by: Mark Brown <broonie@kernel.org>

Some devices may use both gpio0 and gpio1 to independently switch
the speaker and the headphone.

Add support for that.

Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/535454c0c598a8454487fe29b164527370e2db81.1649357263.git.mchehab@kernel.org


Signed-off-by: Mark Brown <broonie@kernel.org>

In preparation for the support of an additional gpio for headphone
control, rename GPIOs to make explicit references to speakers and
gpio0 or gpio1.

No functionality change.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/3008c576ca45d5cc99ad4a18d1d30de45a0aff80.1649357263.git.mchehab@kernel.org


Signed-off-by: Mark Brown <broonie@kernel.org>

When the driver fails during probing, the driver should disable the
regulator, not just handle it in wm8731_hw_init().

The following log reveals it:

[   17.812483] WARNING: CPU: 1 PID: 364 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
[   17.815958] RIP: 0010:_regulator_put+0x3ec/0x4e0
[   17.824467] Call Trace:
[   17.824774]  <TASK>
[   17.825040]  regulator_bulk_free+0x82/0xe0
[   17.825514]  devres_release_group+0x319/0x3d0
[   17.825882]  i2c_device_probe+0x766/0x940
[   17.829198]  i2c_register_driver+0xb5/0x130

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220405121038.4094051-1-zheyuma97@gmail.com


Signed-off-by: Mark Brown <broonie@kernel.org>

The left speaker of max98373 uses spk_r_endpoint, and right
speaker uses spk_l_endpoint, this is obviously wrong.

This patch corrects the endpoints for max98373 codec.

Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220406192341.271465-1-pierre-louis.bossart@linux.intel.com


Signed-off-by: Mark Brown <broonie@kernel.org>

SIDO(Single-Inductor Dual-Ouput) Buck powers up both analog and digital
circuits along with internal memory, powering off this is the last thing
that codec should do when going to very low power.

Current code was powering off this Buck if there are no users of sysclk,
which is not correct. Powering off this buck will result in no register access.
This code path was never tested until recently after adding pm support
in SoundWire controller. Fix this by removing the buck poweroff when the
codec is active and also the code that is not used.

Without this patch all the read/write transactions will never complete and
results in SLIMBus Errors like:

qcom,slim-ngd qcom,slim-ngd.1: Tx:MT:0x0, MC:0x60, LA:0xcf failed:-110
wcd934x-codec wcd934x-codec.1.auto: ASoC: error at soc_component_read_no_lock
	on wcd934x-codec.1.auto for register: [0x00000d05] -110
qcom,slim-ngd-ctrl 171c0000.slim: Error Interrupt received 0x82000000

Reported-by: Amit Pundir <amit.pundir@linaro.org>
Fixes: a61f3b4f

 ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Link: https://lore.kernel.org/r/20220407094313.2880-1-srinivas.kandagatla@linaro.org


Signed-off-by: Mark Brown <broonie@kernel.org>

scontrol doesn't get freed when kstrdup returns NULL.
Fix by free iscontrol in that case.

     scontrol = kzalloc(sizeof(*scontrol), GFP_KERNEL);
     if (!scontrol)
         return -ENOMEM;

     scontrol->name = kstrdup(hdr->name, GFP_KERNEL);
     if (!scontrol->name)
         return -ENOMEM;

Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Link: https://lore.kernel.org/r/20220318021616.2599630-1-liaoyu15@huawei.com


Signed-off-by: Mark Brown <broonie@kernel.org>

We set the cpu_dai capture_ or playback_widget on widget_ready but
never clear them, which leads to failures when unloading/reloading a
topology in modprobe/rmmod tests

BugLink: https://github.com/thesofproject/linux/issues/3535
Fixes: 311ce4fe

 ("ASoC: SOF: Add support for loading topologies")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220406191606.254576-1-pierre-louis.bossart@linux.intel.com


Signed-off-by: Mark Brown <broonie@kernel.org>

This patch takes a defensive programming and paranoid approach in case
the parent device (SoundWire) is pm_runtime resumed but the rt711
device is not. In that case, during the attachment and initialization,
a jack detection workqueue can be scheduled. Since the pm_runtime
suspend routines will not be invoked, the sequence to cancel all
deferred work is not executed, and the jack detection could happen
after the bus stops operating, leading to a timeout.

This patch applies the same solution to rt5682, based on the
similarities between codec drivers. The race condition with rt5682 was
not detected experimentally though.

BugLink: https://github.com/thesofproject/linux/issues/3459


Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220406192005.262996-1-pierre-louis.bossart@linux.intel.com


Signed-off-by: Mark Brown <broonie@kernel.org>

Follow Intel's design to replace max98360a amp SSP2 reather than SSP1
by judging DMI_OEM_STRING in sof_rt5682_quirk_table struct.
And reusing max98357's topology since DAI setting could be leveraged.

Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220324084708.2009375-1-ajye_huang@compal.corp-partner.google.com


Signed-off-by: Mark Brown <broonie@kernel.org>

Refactoring in commit a50b7926 ("ASoC: fsl_sai: implement 1:1
bclk:mclk ratio support") led to the bypass never happening
as (ratio = 1) was caught in the existing if (ratio & 1) continue;
check. The correct check sequence instead is:

 - skip all ratios lower than one and higher than 512
 - skip all odd ratios except for 1:1
 - skip 1:1 ratio if and only if !support_1_1_ratio

And for all others, calculate the appropriate divider. Adjust the
code to facilitate this.

Fixes: a50b7926

 ("ASoC: fsl_sai: implement 1:1 bclk:mclk ratio support")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220405155731.745413-1-a.fatoum@pengutronix.de


Signed-off-by: Mark Brown <broonie@kernel.org>

Don't dereference simple_dai before it has been checked for NULL.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 1e974e5b

 ("ASoC: audio_graph_card2: Add support for variable slot widths")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220404113252.1152659-1-rf@opensource.cirrus.com


Signed-off-by: Mark Brown <broonie@kernel.org>

Merge series from Heiner Kallweit <hkallweit1@gmail.com>:

On a S905W-based system I get the following error:
debugfs: Directory 'c1105400.audio-controller' with parent 'P230-Q200' already present!

Turned out that multiple components having the same name triggers this
error in soc_init_component_debugfs(). The proposed solution allows
other drivers to adopt the same approach with minimal effort.
With the patch the error is gone and that's the debugfs entries.

/sys/kernel/debug/asoc/P230-Q200/acodec:c1105400.audio-controller
/sys/kernel/debug/asoc/P230-Q200/hdmi:c1105400.audio-controller
/sys/kernel/debug/asoc/P230-Q200/cpu:c1105400.audio-controller

On a S905W-based system I get the following error:
debugfs: Directory 'c1105400.audio-controller' with parent 'P230-Q200' already present!

Turned out that multiple components having the same name triggers this
error in soc_init_component_debugfs(). With the patch the error is gone
and that's the debugfs entries.

/sys/kernel/debug/asoc/P230-Q200/acodec:c1105400.audio-controller
/sys/kernel/debug/asoc/P230-Q200/hdmi:c1105400.audio-controller
/sys/kernel/debug/asoc/P230-Q200/cpu:c1105400.audio-controller

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/38053baf-c33b-7fdf-7593-99b22153a9c0@gmail.com


Signed-off-by: Mark Brown <broonie@kernel.org>

Allow the component debugfs_prefix to be set from
snd_soc_component_driver. First use case is avoiding a duplicate
debugfs entry error in case a device has multiple components
which have the same name therefore.

Note that we don't set component->debugfs_prefix if it's set already.
That's needed because partially component->debugfs_prefix is set
before calling snd_soc_component_initialize().

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/d18bff6a-1df1-5f95-0cf8-10dbaa62d7be@gmail.com


Signed-off-by: Mark Brown <broonie@kernel.org>

devm_snd_soc_register_component() may fails, we should check the error
and do the corresponding error handling.

Fixes: 150db8c5

 ("ASoC: codecs: Add msm8916-wcd digital codec")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220403115239.30140-1-linmq006@gmail.com


Signed-off-by: Mark Brown <broonie@kernel.org>

We need to call clk_put() to undo clk_get() in the error path.
Use devm_clk_get() to obtain a reference to the clock, It has
the benefit that clk_put() is no longer required.

Fixes: 0d6a04da

 ("ASoC: Add Rockchip rk817 audio CODEC support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220404090753.17940-1-linmq006@gmail.com


Signed-off-by: Mark Brown <broonie@kernel.org>

We enabled UBSAN in the ubuntu kernel, and the cs35l41 driver triggers
a warning calltrace like below:

cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: bitoffset= 8, word_offset=23, bit_sum mod 32=0, otp_map[i].size = 24
cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: bitoffset= 0, word_offset=24, bit_sum mod 32=24, otp_map[i].size = 0
================================================================================
UBSAN: shift-out-of-bounds in linux-kernel-src/sound/soc/codecs/cs35l41-lib.c:836:8
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 10 PID: 595 Comm: systemd-udevd Not tainted 5.15.0-23-generic #23
Hardware name: LENOVO \x02MFG_IN_GO/\x02MFG_IN_GO, BIOS N3GET19W (1.00 ) 03/11/2022
Call Trace:
 <TASK>
 show_stack+0x52/0x58
 dump_stack_lvl+0x4a/0x5f
 dump_stack+0x10/0x12
 ubsan_epilogue+0x9/0x45
 __ubsan_handle_shift_out_of_bounds.cold+0x61/0xef
 ? regmap_unlock_mutex+0xe/0x10
 cs35l41_otp_unpack.cold+0x1c6/0x2b2 [snd_soc_cs35l41_lib]
 cs35l41_hda_probe+0x24f/0x33a [snd_hda_scodec_cs35l41]
 cs35l41_hda_i2c_probe+0x65/0x90 [snd_hda_scodec_cs35l41_i2c]

When both bitoffset and otp_map[i].size are 0, the line 836 will
result in GENMASK(-1, 0), this triggers the shift-out-of-bounds
calltrace.

Here add a checking, if both bitoffset and otp_map[i].size are 0,
do not run GENMASK() and directly set otp_val to 0, this will not
bring any function change on the driver but could avoid the calltrace.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20220324081839.62009-2-hui.wang@canonical.com


Signed-off-by: Mark Brown <broonie@kernel.org>

otp_map[].size is a key variable to compute the value of otp_val and
to update the bit_offset, it is helpful to debug if could put it in
the debug log.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Reviewed-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220324081839.62009-1-hui.wang@canonical.com


Signed-off-by: Mark Brown <broonie@kernel.org>

The bug is here:
	if (!dai) {

The list iterator value 'dai' will *always* be set and non-NULL
by for_each_component_dais(), so it is incorrect to assume that
the iterator value will be NULL if the list is empty or no element
is found (In fact, it will be a bogus pointer to an invalid struct
object containing the HEAD). Otherwise it will bypass the check
'if (!dai) {' (never call dev_err() and never return -ENODEV;)
and lead to invalid memory access lately when calling
'rt5682_set_bclk1_ratio(dai, factor);'.

To fix the bug, just return rt5682_set_bclk1_ratio(dai, factor);
when found the 'dai', otherwise dev_err() and return -ENODEV;

Cc: stable@vger.kernel.org
Fixes: ebbfabc1

 ("ASoC: rt5682: Add CCF usage for providing I2S clks")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220327081002.12684-1-xiam0nd.tong@gmail.com


Signed-off-by: Mark Brown <broonie@kernel.org>

These two bug are here:
	list_for_each_entry_safe_continue(w, n, list,
					power_list);
	list_for_each_entry_safe_continue(w, n, list,
					power_list);

After the list_for_each_entry_safe_continue() exits, the list iterator
will always be a bogus pointer which point to an invalid struct objdect
containing HEAD member. The funciton poniter 'w->event' will be a
invalid value which can lead to a control-flow hijack if the 'w' can be
controlled.

The original intention was to continue the outer list_for_each_entry_safe()
loop with the same entry if w->event is NULL, but misunderstanding the
meaning of list_for_each_entry_safe_continue().

So just add a 'continue;' to fix the bug.

Cc: stable@vger.kernel.org
Fixes: 163cac06

 ("ASoC: Factor out DAPM sequence execution")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220329012134.9375-1-xiam0nd.tong@gmail.com


Signed-off-by: Mark Brown <broonie@kernel.org>

At the kzalloc() call in dpcm_be_connect(), there is no spin lock involved.
It's merely protected by card->pcm_mutex, instead.  The spinlock is applied
at the later call with snd_soc_pcm_stream_lock_irq() only for the list
manipulations.  (See it's *_irq(), not *_irqsave(); that means the context
being sleepable at that point.)  So, we can use GFP_KERNEL safely there.

This patch revert commit d8a9c6e1 ("ASoC: soc-pcm: use GFP_ATOMIC for
dpcm structure") which is no longer needed since commit b7898396


("ASoC: soc-pcm: Fix and cleanup DPCM locking").

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/e740f1930843060e025e3c0f17ec1393cfdafb26.1648757961.git.christophe.jaillet@wanadoo.fr


Signed-off-by: Mark Brown <broonie@kernel.org>

The scontrol->name is allocated with kstrdup, it must be freed before the
scontrol is freed to avoid leaking memory.

The constant leaking happens via sof_widget_unload() path on every module
removal.

Fixes: b5cee8fe

 ("ASoC: SOF: topology: Make control parsing IPC agnostic")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220331114845.32747-1-peter.ujfalusi@linux.intel.com


Signed-off-by: Mark Brown <broonie@kernel.org>

The bug is here:
            if (!dai) {

The list iterator value 'dai' will *always* be set and non-NULL
by for_each_component_dais(), so it is incorrect to assume that
the iterator value will be NULL if the list is empty or no element
is found (In fact, it will be a bogus pointer to an invalid struct
object containing the HEAD). Otherwise it will bypass the check
'if (!dai) {' (never call dev_err() and never return -ENODEV;)
and lead to invalid memory access lately when calling
'rt5682s_set_bclk1_ratio(dai, factor);'.

To fix the bug, just return rt5682s_set_bclk1_ratio(dai, factor);
when found the 'dai', otherwise dev_err() and return -ENODEV;

Cc: stable@vger.kernel.org
Fixes: bdd229ab

 ("ASoC: rt5682s: Add driver for ALC5682I-VS codec")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220327081300.12962-1-xiam0nd.tong@gmail.com


Signed-off-by: Mark Brown <broonie@kernel.org>

Academic correction of error handling:
In case the allocation of kc or kcontrol_type fails the correct label to
jump is hdr_err since the template.sname has been also allocated at this
point.

Fixes: d29d41e2

 ("ASoC: topology: Add support for multiple kcontrol types to a widget")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220331114957.519-1-peter.ujfalusi@linux.intel.com


Signed-off-by: Mark Brown <broonie@kernel.org>

The MCLK of the WM8731 on the AT91SAM9G20-EK board is connected to the
PCK0 output of the SoC, intended in the reference software to be supplied
using PLLB and programmed to 12MHz. As originally written for use with a
board file the audio driver was responsible for configuring the entire tree
but in the conversion to the common clock framework the registration of
the named pck0 and pllb clocks was removed so the driver has failed to
instantiate ever since.

Since the WM8731 driver has had support for managing a MCLK provided via
the common clock framework for some time we can simply drop all the clock
management code from the machine driver other than configuration of the
sysclk rate, the CODEC driver still respects that configuration from the
machine driver.

Fixes: ff78a189

 ("ARM: at91: remove old at91-specific clock driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220325154241.1600757-2-broonie@kernel.org

Pull more tracing updates from Steven Rostedt:

 - Rename the staging files to give them some meaning. Just
   stage1,stag2,etc, does not show what they are for

 - Check for NULL from allocation in bootconfig

 - Hold event mutex for dyn_event call in user events

 - Mark user events to broken (to work on the API)

 - Remove eBPF updates from user events

 - Remove user events from uapi header to keep it from being installed.

 - Move ftrace_graph_is_dead() into inline as it is called from hot
   paths and also convert it into a static branch.

* tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Move user_events.h temporarily out of include/uapi
  ftrace: Make ftrace_graph_is_dead() a static branch
  tracing: Set user_events to BROKEN
  tracing/user_events: Remove eBPF interfaces
  tracing/user_events: Hold event_mutex during dyn_event_add
  proc: bootconfig: Add null pointer check
  tracing: Rename the staging files for trace_events

Pull clk fix from Stephen Boyd:
 "A single revert to fix a boot regression seen when clk_put() started
  dropping rate range requests. It's best to keep various systems
  booting so we'll kick this out and try again next time"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  Revert "clk: Drop the rate range on clk_put()"

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 fixes and updates:

   - Make the prctl() for enabling dynamic XSTATE components correct so
     it adds the newly requested feature to the permission bitmap
     instead of overwriting it. Add a selftest which validates that.

   - Unroll string MMIO for encrypted SEV guests as the hypervisor
     cannot emulate it.

   - Handle supervisor states correctly in the FPU/XSTATE code so it
     takes the feature set of the fpstate buffer into account. The
     feature sets can differ between host and guest buffers. Guest
     buffers do not contain supervisor states. So far this was not an
     issue, but with enabling PASID it needs to be handled in the buffer
     offset calculation and in the permission bitmaps.

   - Avoid a gazillion of repeated CPUID invocations in by caching the
     values early in the FPU/XSTATE code.

   - Enable CONFIG_WERROR in x86 defconfig.

   - Make the X86 defconfigs more useful by adapting them to Y2022
     reality"

* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu/xstate: Consolidate size calculations
  x86/fpu/xstate: Handle supervisor states in XSTATE permissions
  x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
  x86/fpu: Cache xfeature flags from CPUID
  x86/fpu/xsave: Initialize offset/size cache early
  x86/fpu: Remove unused supervisor only offsets
  x86/fpu: Remove redundant XCOMP_BV initialization
  x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
  x86/config: Make the x86 defconfigs a bit more usable
  x86/defconfig: Enable WERROR
  selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
  x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation

Pull RT signal fix from Thomas Gleixner:
 "Revert the RT related signal changes. They need to be reworked and
  generalized"

* tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"

Pull more dma-mapping updates from Christoph Hellwig:

 - fix a regression in dma remap handling vs AMD memory encryption (me)

 - finally kill off the legacy PCI DMA API (Christophe JAILLET)

* tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: move pgprot_decrypted out of dma_pgprot
  PCI/doc: cleanup references to the legacy PCI DMA API
  PCI: Remove the deprecated "pci-dma-compat.h" API

Pull ARM fixes from Russell King:

 - avoid unnecessary rebuilds for library objects

 - fix return value of __setup handlers

 - fix invalid input check for "crashkernel=" kernel option

 - silence KASAN warnings in unwind_frame

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame()
  ARM: 9190/1: kdump: add invalid input check for 'crashkernel=0'
  ARM: 9187/1: JIVE: fix return value of __setup handler
  ARM: 9189/1: decompressor: fix unneeded rebuilds of library objects

This reverts commit 7dabfa2b

. There are
multiple reports that this breaks boot on various systems. The common
theme is that orphan clks are having rates set on them when that isn't
expected. Let's revert it out for now so that -rc1 boots.

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Tony Lindgren <tony@atomide.com>
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/r/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com


Cc: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220403022818.39572-1-sboyd@kernel.org

Merge tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:

 - Avoid SEGV if core.cpus isn't set in 'perf stat'.

 - Stop depending on .git files for building PERF-VERSION-FILE, used in
   'perf --version', fixing some perf tools build scenarios.

 - Convert tracepoint.py example to python3.

 - Update UAPI header copies from the kernel sources: socket,
   mman-common, msr-index, KVM, i915 and cpufeatures.

 - Update copy of libbpf's hashmap.c.

 - Directly return instead of using local ret variable in
   evlist__create_syswide_maps(), found by coccinelle.

* tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf python: Convert tracepoint.py example to python3
  perf evlist: Directly return instead of using local ret variable
  perf cpumap: More cpu map reuse by merge.
  perf cpumap: Add is_subset function
  perf evlist: Rename cpus to user_requested_cpus
  perf tools: Stop depending on .git files for building PERF-VERSION-FILE
  tools headers cpufeatures: Sync with the kernel sources
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools kvm headers arm64: Update KVM headers from the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  tools headers UAPI: Sync asm-generic/mman-common.h with the kernel
  perf beauty: Update copy of linux/socket.h with the kernel sources
  perf tools: Update copy of libbpf's hashmap.c
  perf stat: Avoid SEGV if core.cpus isn't set

Merge tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix empty $(PYTHON) expansion.

 - Fix UML, which got broken by the attempt to suppress Clang warnings.

 - Fix warning message in modpost.

* tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  modpost: restore the warning message for missing symbol versions
  Revert "um: clang: Strip out -mno-global-merge from USER_CFLAGS"
  kbuild: Remove '-mno-global-merge'
  kbuild: fix empty ${PYTHON} in scripts/link-vmlinux.sh
  kconfig: remove stale comment about removed kconfig_print_symbol()

Pull MIPS fixes from Thomas Bogendoerfer:

 - build fix for gpio

 - fix crc32 build problems

 - check for failed memory allocations

* tag 'mips_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: crypto: Fix CRC32 code
  MIPS: rb532: move GPIOD definition into C-files
  MIPS: lantiq: check the return value of kzalloc()
  mips: sgi-ip22: add a check for the return of kzalloc()

Pull kvm fixes from Paolo Bonzini:

 - Only do MSR filtering for MSRs accessed by rdmsr/wrmsr

 - Documentation improvements

 - Prevent module exit until all VMs are freed

 - PMU Virtualization fixes

 - Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences

 - Other miscellaneous bugfixes

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
  KVM: x86: fix sending PV IPI
  KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
  KVM: x86: Remove redundant vm_entry_controls_clearbit() call
  KVM: x86: cleanup enter_rmode()
  KVM: x86: SVM: fix tsc scaling when the host doesn't support it
  kvm: x86: SVM: remove unused defines
  KVM: x86: SVM: move tsc ratio definitions to svm.h
  KVM: x86: SVM: fix avic spec based definitions again
  KVM: MIPS: remove reference to trap&emulate virtualization
  KVM: x86: document limitations of MSR filtering
  KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr
  KVM: x86/emulator: Emulate RDPID only if it is enabled in guest
  KVM: x86/pmu: Fix and isolate TSX-specific performance event logic
  KVM: x86: mmu: trace kvm_mmu_set_spte after the new SPTE was set
  KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
  KVM: x86: Trace all APICv inhibit changes and capture overall status
  KVM: x86: Add wrappers for setting/clearing APICv inhibits
  KVM: x86: Make APICv inhibit reasons an enum and cleanup naming
  KVM: X86: Handle implicit supervisor access with SMAP
  KVM: X86: Rename variable smap to not_smap in permission_fault()
  ...