- Jul 24, 2013
-
-
Kukjin Kim authored
Re-ordering in alphabetical. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Mark Brown authored
The default audio module for the Arndale has a WM1811A on it. Add this to the device tree bindings. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Mark Brown authored
As part of this add nodes for the main wall supply as well as bucks 7 and 8 which are used to drop that down for several of the LDOs. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Mark Brown authored
Fixed voltage regulators (and other similar free standing things) are supposed to go on a simple-bus for DT correctness reasons. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Mark Brown authored
The out of tree code configures a pullup on the line indicating that it is an active low interrupt. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
- Jul 04, 2013
-
-
Xianglong Du authored
On CSR SiRFprimaII/atlasVI, there is a programmable 16-bit divider (RTC_DIV) that divides the input 32.768KHz clock to the frequency that users need (E.g. 1 Hz). The divided real-time clock will be used to drive a 32-bit counter (RTC_COUNTER) that provides users with the actual time. In each cycle of the divided real-time clock, there is a Hertz interrupt generated to the RISC. Users can also configure an alarm (RTC_ALARM). When RTC_COUNTER matches the alarm, there will be an alarm interrupt generated to the RISC. The system RTC can generate an alarm wake-up signal to notify the power controller to wake up from power saving mode. Signed-off-by: Xianglong Du <Xianglong.Du@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- Jul 03, 2013
-
-
Stephen Warren authored
Commit 4c94c8b5 "ARM: tegra: update device trees for USB binding rework" added regulator definitions for GPIO-controlled USB VBUS. However, none of these contained the essential DT property enable-active-high. Add this so that the regulator definitions are correct. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
- Jun 28, 2013
-
-
Rahul Sharma authored
This patch renames the combatible strings for hdmi, mixer, ddc and hdmiphy. It follows the convention of using compatible string which represent the SoC in which the IP was added for the first time. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
- Jun 27, 2013
-
-
Fabio Estevam authored
Instead of using a GPIO to turn on/off the CAN transceiver, it is better to use a regulator as some systems may use a PMIC to power the CAN transceiver. Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Linus Walleij authored
This alters the local side address of the iospace to zero, non prefetchable memory local side address to 0x00000000 and prefetchable memory local side address to 0x10000000, so as to match the values actually poked in by the driver. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Manjunathappa, Prakash authored
function-mask DT property is now a mask for a pin at each pin offset inside a given pincontrol register. Fix DA850 DT data to reflect this change. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> [nsekhar@ti.com: reword commit message for clarity] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
-
Jingoo Han authored
This patch adds pcie controller node for exynos5440-ssdk5440, and also adds a phandle for pin controller node. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Jingoo Han authored
Exynos5440 has two PCIe controllers which can be used as root complex for PCIe interface. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
- Jun 26, 2013
-
-
Jean-Christophe PLAGNIOL-VILLARD authored
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Jean-Christophe PLAGNIOL-VILLARD authored
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Nicolas Ferre authored
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Nicolas Ferre authored
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Wenyou Yang <wenyou.yang@atmel.com>
-
Nicolas Ferre authored
In previous version of SPI driver we where using different compatibility stings for finding SPI features. We are now using the IP revision information. So we stay with the unique compatibility string for this driver: "atmel,at91rm9200-spi". Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Wenyou Yang <wenyou.yang@atmel.com>
-
Srinivas Kandagatla authored
B2020 ADI board is reference board for STIH415/416 SOCs, it has 2 x UART, 4x USB, 1 x Ethernet, 1 x SATA, 1 x PCIe, and 2GB RAM with standard set-top box IPs. This patch adds initial support to B2020 with STiH415/416 with SBC_UART1 as console and a heard beat LED. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> CC: Stephen Gallimore <stephen.gallimore@st.com> CC: Stuart Menefy <stuart.menefy@st.com> CC: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Srinivas Kandagatla authored
B2000 board is reference board for STIH415/416 SOCs, it has 2 x UART, 4x USB, 2 x Ethernet, 1 x SATA, 1 x PCIe, and 1GB RAM. This patch add initial support to b2000 with STiH415/416 with UART2 as console and a heard beat LED. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> CC: Stephen Gallimore <stephen.gallimore@st.com> CC: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Srinivas Kandagatla authored
The STiH416 is advanced HD AVC processor with 3D graphics acceleration and 1.2-GHz ARM Cortex-A9 SMP CPU. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> CC: Stephen Gallimore <stephen.gallimore@st.com> CC: Stuart Menefy <stuart.menefy@st.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Srinivas Kandagatla authored
The STiH415 is the next generation of HD, AVC set-top box processors for satellite, cable, terrestrial and IP-STB markets. It is an ARM Cortex-A9 1.0 GHz, dual-core CPU. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> CC: Stephen Gallimore <stephen.gallimore@st.com> CC: Stuart Menefy <stuart.menefy@st.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
- Jun 24, 2013
-
-
Ezequiel Garcia authored
The length of the registers area for the Marvell 370/XP Ethernet controller was incorrect in the .dtsi: 0x2500, while it should have been 0x4000. This problem wasn't noticed because there used to be a static mapping for all the MMIO register region set up by ->map_io(). The register length was fixed in all the other device tree files, except from the armada-xp-mv78260.dtsi, in the following commit: commit cf8088c5 Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Date: Tue May 21 12:33:27 2013 +0200 arm: mvebu: fix length of Ethernet registers area in .dtsi This commit fixes a kernel panic in mvneta_probe(), when the kernel tries to access the unmapped registers: [ 163.639092] mvneta d0070000.ethernet eth0: mac: 6e:3c:4f:87:17:2e [ 163.646962] mvneta d0074000.ethernet eth1: mac: 6a:04:4e:6f:f5:ef [ 163.654853] mvneta d0030000.ethernet eth2: mac: 2a:99:19:19:fc:4c [ 163.661258] Unable to handle kernel paging request at virtual address f011bcf0 [ 163.668523] pgd = c0004000 [ 163.671237] [f011bcf0] *pgd=2f006811, *pte=00000000, *ppte=00000000 [ 163.677565] Internal error: Oops: 807 [#1] SMP ARM [ 163.682370] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-rc6-01850-gba0682e #11 [ 163.690046] task: ef04c000 ti: ef03e000 task.ti: ef03e000 [ 163.695467] PC is at mvneta_probe+0x34c/0xabc [...] Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
- Jun 22, 2013
-
-
Daniel Tang authored
This patch adds device trees for describing the TI-Nspire hardware. Changes between v1 and v2: * Change "keymap" binding to the standard "linux,keymap" binding. Signed-off-by: Daniel Tang <dt.tangr@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
- Jun 21, 2013
-
-
Ezequiel Garcia authored
Although the internal register window size is 1 MiB, the previous ranges translation for the internal register space had a size of 0x4000000. This was done to allow the crypto and nand node to access the corresponding 'sram' and 'nand' decoding windows. In order to describe the hardware more accurately, we declare the real 1 MiB internal register space in the ranges, and add a translation entry for the nand node to access the 'nand' window. This commit will make future improvements on the MBus DT binding easier. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
Lee Jones authored
When this node was added, the AB8500 GPIO driver was pretty broken. As a hack, we pretended that NOMADIK GPIO 26 was the correct on/off pin, as it was unused. It worked because AB8500 GPIO 26 was in an 'always on from boot' state. Now the AB8500 GPIO driver is working, the default state for all the pins is 'off'. Let's flip back over to use the correct GPIO which is _actually_ attached to the regulator. We're also taking the opportunity to straighten out some formatting misdemeanours, swapping spaces for tabs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>
-
Lee Jones authored
Here we're adding a node for the AB8500 GPIO device. This will allow other DT:ed components to obtain GPIOs for use within their drivers. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>
-
Heiko Stuebner authored
This adds a generic devicetree board file and a dtsi for boards based on the RK3066a SoCs from Rockchip. Apart from the generic parts (gic, clocks, pinctrl) the only components currently supported are the timers, uarts and mmc ports (all DesignWare- based). Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Olof Johansson <olof@lixom.net>
-
Heiko Stuebner authored
This adds a basic clock setup for rk3066a SoCs. Only the gates are set up currently, as the mux and dividers should use the upcoming generic devicetree bindings. Clocks whose rates need to be known are supplied by fixed-rate "dummy"-clocks that provide the correct rate. This is uncritical insofar that the only bootloader currently in existence for Rockchip devices is the propietary Rockchip one that always setups the clocks in the necessary way. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Mike Turquette <mturquette@linaro.org>
-
Matt Porter authored
CodingStyle does not allow C99 style comments. Since the dts files live in the kernel for now, make this compliant. Signed-off-by: Matt Porter <matt.porter@linaro.org> Acked-by: Christian Daudt <csd@broadcom.com>
-
Christian Daudt authored
Add SDHCI bindings for the Broadcom 281xx SoCs. Changes from V2: - Documentation cleanups Changes from V1: - split original patch into 2, one for driver and this one for dt Signed-off-by: Christian Daudt <csd@broadcom.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
-
- Jun 20, 2013
-
-
Philip Avinash authored
Replace /include/ by #include for da850 device tree files, in order to use the C pre-processor, making use of #define features possible. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
-
Linus Walleij authored
This revamps the device tree to fit with the new clock implementation and brings it quite a bit closer to how the hardware actually works. After this the clock implementation knows about all clock gates and will gate off all unused clocks at boot time and save a bit of power. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Roger Quadros authored
USB Host PHY clock on port 2 must be configured to 19.2MHz. Provide this information. Cc: Sricharan R <r.sricharan@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
-
Roger Quadros authored
On Panda the +5V supply for DVI EDID is supplied by the same regulator that poweres the USB Hub. Currently, the DSS/DVI subsystem doesn't know how to manage this regulator and so DVI EDID reads will fail if USB Hub is not enabled. As a temporary fix we keep this regulator permanently enabled on boot. This fixes the DVI EDID read problem. CC: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
-
Roger Quadros authored
Provide the RESET and Power regulators for the USB PHY, the USB Host port mode and the PHY device. Also provide pin multiplexer information for the USB host pins. HACK: The reset control need to be replaced with the proper gpio-controlled reset driver as soon it will be merged [1]. [1] http://thread.gmane.org/gmane.linux.drivers.devicetree/36830 Signed-off-by: Roger Quadros <rogerq@ti.com> [benoit.cousson@linaro.org: Add disclaimer about the reset control inside changelog and code] Cc: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
-
- Jun 19, 2013
-
-
Thomas Petazzoni authored
The Armada 370 RD board has two internal mini-PCIe connectors. This commit adds the necessary Device Tree informations to enable the usage of those mini-PCIe connectors. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
Leela Krishna Amudala authored
Add the required pin configuration support to EXYNOS5420 using pinctrl interface. Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Acked-by: Tomasz Figa <t.figa@samsung.com> Tested-by : Sunil Joshi <joshi@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Afzal Mohammed authored
Add AM43x ePOS EVM minimal DT source - this is a minimal one to get it booting. Also include it in omap2plus dtbs and document bindings. The hardware is under development. Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
-
Eduardo Valentin authored
Add bandgap device DT entry for OMAP5 dtsi. Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: J Keerthy <j-keerthy@ti.com> [benoit.cousson@linaro.org: Fix alignement and use the macros for IRQ attributes] Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
-