Read stale PTP Tx timestamps from PHY on cleanup.

After running out of Tx timestamps request handlers, hardware (HW) stops
reporting finished requests. Function ice_ptp_tx_tstamp_cleanup() used
to only clean up stale handlers in driver and was leaving the hardware
registers not read. Not reading stale PTP Tx timestamps prevents next
interrupts from arriving and makes timestamping unusable.

Fixes: ea9b847c

 ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The iAVF driver uses 3 virtchnl op codes to communicate with the PF
regarding the VF Tx queues:

* VIRTCHNL_OP_CONFIG_VSI_QUEUES configures the hardware and firmware
logic for the Tx queues

* VIRTCHNL_OP_ENABLE_QUEUES configures the queue interrupts

* VIRTCHNL_OP_DISABLE_QUEUES disables the queue interrupts and Tx rings.

There is a bug in the iAVF driver due to the race condition between VF
reset request and shutdown being executed in parallel. This leads to a
break in logic and VIRTCHNL_OP_DISABLE_QUEUES is not being sent.

If this occurs, the PF driver never cleans up the Tx queues. This results
in leaving behind stale Tx queue settings in the hardware and firmware.

The most obvious outcome is that upon the next
VIRTCHNL_OP_CONFIG_VSI_QUEUES, the PF will fail to program the Tx
scheduler node due to a lack of space.

We need to protect ICE driver against such situation.

To fix this, make sure we clear existing stale settings out when
handling VIRTCHNL_OP_CONFIG_VSI_QUEUES. This ensures we remove the
previous settings.

Calling ice_vf_vsi_dis_single_txq should be safe as it will do nothing if
the queue is not configured. The function already handles the case when the
Tx queue is not currently configured and exits with a 0 return in that
case.

Fixes: 7ad15440

 ("ice: Refactor VIRTCHNL_OP_CONFIG_VSI_QUEUES handling")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Function ice_plug_aux_dev() assigns pf->adev field too early prior
aux device initialization and on other side ice_unplug_aux_dev()
starts aux device deinit and at the end assigns NULL to pf->adev.
This is wrong because pf->adev should always be non-NULL only when
aux device is fully initialized and ready. This wrong order causes
a crash when ice_send_event_to_aux() call occurs because that function
depends on non-NULL value of pf->adev and does not assume that
aux device is half-initialized or half-destroyed.
After order correction the race window is tiny but it is still there,
as Leon mentioned and manipulation with pf->adev needs to be protected
by mutex.

Fix (un-)plugging functions so pf->adev field is set after aux device
init and prior aux device destroy and protect pf->adev assignment by
new mutex. This mutex is also held during ice_send_event_to_aux()
call to ensure that aux device is valid during that call.
Note that device lock used ice_send_event_to_aux() needs to be kept
to avoid race with aux drv unload.

Reproducer:
cycle=1
while :;do
        echo "#### Cycle: $cycle"

        ip link set ens7f0 mtu 9000
        ip link add bond0 type bond mode 1 miimon 100
        ip link set bond0 up
        ifenslave bond0 ens7f0
        ip link set bond0 mtu 9000
        ethtool -L ens7f0 combined 1
        ip link del bond0
        ip link set ens7f0 mtu 1500
        sleep 1

        let cycle++
done

In short when the device is added/removed to/from bond the aux device
is unplugged/plugged. When MTU of the device is changed an event is
sent to aux device asynchronously. This can race with (un)plugging
operation and because pf->adev is set too early (plug) or too late
(unplug) the function ice_send_event_to_aux() can touch uninitialized
or destroyed fields. In the case of crash below pf->adev->dev.mutex.

Crash:
[   53.372066] bond0: (slave ens7f0): making interface the new active one
[   53.378622] bond0: (slave ens7f0): Enslaving as an active interface with an u
p link
[   53.386294] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
[   53.549104] bond0: (slave ens7f1): Enslaving as a backup interface with an up
 link
[   54.118906] ice 0000:ca:00.0 ens7f0: Number of in use tx queues changed inval
idating tc mappings. Priority traffic classification disabled!
[   54.233374] ice 0000:ca:00.1 ens7f1: Number of in use tx queues changed inval
idating tc mappings. Priority traffic classification disabled!
[   54.248204] bond0: (slave ens7f0): Releasing backup interface
[   54.253955] bond0: (slave ens7f1): making interface the new active one
[   54.274875] bond0: (slave ens7f1): Releasing backup interface
[   54.289153] bond0 (unregistering): Released all slaves
[   55.383179] MII link monitoring set to 100 ms
[   55.398696] bond0: (slave ens7f0): making interface the new active one
[   55.405241] BUG: kernel NULL pointer dereference, address: 0000000000000080
[   55.405289] bond0: (slave ens7f0): Enslaving as an active interface with an u
p link
[   55.412198] #PF: supervisor write access in kernel mode
[   55.412200] #PF: error_code(0x0002) - not-present page
[   55.412201] PGD 25d2ad067 P4D 0
[   55.412204] Oops: 0002 [#1] PREEMPT SMP NOPTI
[   55.412207] CPU: 0 PID: 403 Comm: kworker/0:2 Kdump: loaded Tainted: G S
           5.17.0-13579-g57f2d6540f03 #1
[   55.429094] bond0: (slave ens7f1): Enslaving as a backup interface with an up
 link
[   55.430224] Hardware name: Dell Inc. PowerEdge R750/06V45N, BIOS 1.4.4 10/07/
2021
[   55.430226] Workqueue: ice ice_service_task [ice]
[   55.468169] RIP: 0010:mutex_unlock+0x10/0x20
[   55.472439] Code: 0f b1 13 74 96 eb e0 4c 89 ee eb d8 e8 79 54 ff ff 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 65 48 8b 04 25 40 ef 01 00 31 d2 <f0> 48 0f b1 17 75 01 c3 e9 e3 fe ff ff 0f 1f 00 0f 1f 44 00 00 48
[   55.491186] RSP: 0018:ff4454230d7d7e28 EFLAGS: 00010246
[   55.496413] RAX: ff1a79b208b08000 RBX: ff1a79b2182e8880 RCX: 0000000000000001
[   55.503545] RDX: 0000000000000000 RSI: ff4454230d7d7db0 RDI: 0000000000000080
[   55.510678] RBP: ff1a79d1c7e48b68 R08: ff4454230d7d7db0 R09: 0000000000000041
[   55.517812] R10: 00000000000000a5 R11: 00000000000006e6 R12: ff1a79d1c7e48bc0
[   55.524945] R13: 0000000000000000 R14: ff1a79d0ffc305c0 R15: 0000000000000000
[   55.532076] FS:  0000000000000000(0000) GS:ff1a79d0ffc00000(0000) knlGS:0000000000000000
[   55.540163] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   55.545908] CR2: 0000000000000080 CR3: 00000003487ae003 CR4: 0000000000771ef0
[   55.553041] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   55.560173] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   55.567305] PKRU: 55555554
[   55.570018] Call Trace:
[   55.572474]  <TASK>
[   55.574579]  ice_service_task+0xaab/0xef0 [ice]
[   55.579130]  process_one_work+0x1c5/0x390
[   55.583141]  ? process_one_work+0x390/0x390
[   55.587326]  worker_thread+0x30/0x360
[   55.590994]  ? process_one_work+0x390/0x390
[   55.595180]  kthread+0xe6/0x110
[   55.598325]  ? kthread_complete_and_exit+0x20/0x20
[   55.603116]  ret_from_fork+0x1f/0x30
[   55.606698]  </TASK>

Fixes: f9f5301e

 ("ice: Register auxiliary device to provide RDMA")
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Vladimir Oltean says:

====================
Ocelot VCAP fixes

Changes in v2:
fix the NPDs and UAFs caused by filter->trap_list in a more robust way
that actually does not introduce bugs of its own (1/5)

This series fixes issues found while running
tools/testing/selftests/net/forwarding/tc_actions.sh on the ocelot
switch:

- NULL pointer dereference when failing to offload a filter
- NULL pointer dereference after deleting a trap
- filters still having effect after being deleted
- dropped packets still being seen by software
- statistics counters showing double the amount of hits
- statistics counters showing inexistent hits
- invalid configurations not rejected
====================

Link: https://lore.kernel.org/r/20220504235503.4161890-1-vladimir.oltean@nxp.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Given the following order of operations:

(1) we add filter A using tc-flower
(2) we send a packet that matches it
(3) we read the filter's statistics to find a hit count of 1
(4) we add a second filter B with a higher preference than A, and A
    moves one position to the right to make room in the TCAM for it
(5) we send another packet, and this matches the second filter B
(6) we read the filter statistics again.

When this happens, the hit count of filter A is 2 and of filter B is 1,
despite a single packet having matched each filter.

Furthermore, in an alternate history, reading the filter stats a second
time between steps (3) and (4) makes the hit count of filter A remain at
1 after step (6), as expected.

The reason why this happens has to do with the filter->stats.pkts field,
which is written to hardware through the call path below:

               vcap_entry_set
               /      |      \
              /       |       \
             /        |        \
            /         |         \
es0_entry_set   is1_entry_set   is2_entry_set
            \         |         /
             \        |        /
              \       |       /
        vcap_data_set(data.counter, ...)

The primary role of filter->stats.pkts is to transport the filter hit
counters from the last readout all the way from vcap_entry_get() ->
ocelot_vcap_filter_stats_update() -> ocelot_cls_flower_stats().
The reason why vcap_entry_set() writes it to hardware is so that the
counters (saturating and having a limited bit width) are cleared
after each user space readout.

The writing of filter->stats.pkts to hardware during the TCAM entry
movement procedure is an unintentional consequence of the code design,
because the hit count isn't up to date at this point.

So at step (4), when filter A is moved by ocelot_vcap_filter_add() to
make room for filter B, the hardware hit count is 0 (no packet matched
on it in the meantime), but filter->stats.pkts is 1, because the last
readout saw the earlier packet. The movement procedure programs the old
hit count back to hardware, so this creates the impression to user space
that more packets have been matched than they really were.

The bug can be seen when running the gact_drop_and_ok_test() from the
tc_actions.sh selftest.

Fix the issue by reading back the hit count to tmp->stats.pkts before
migrating the VCAP filter. Sure, this is a best-effort technique, since
the packets that hit the rule between vcap_entry_get() and
vcap_entry_set() won't be counted, but at least it allows the counters
to be reliably used for selftests where the traffic is under control.

The vcap_entry_get() name is a bit unintuitive, but it only reads back
the counter portion of the TCAM entry, not the entire entry.

The index from which we retrieve the counter is also a bit unintuitive
(i - 1 during add, i + 1 during del), but this is the way in which TCAM
entry movement works. The "entry index" isn't a stored integer for a
TCAM filter, instead it is dynamically computed by
ocelot_vcap_block_get_filter_index() based on the entry's position in
the &block->rules list. That position (as well as block->count) is
automatically updated by ocelot_vcap_filter_add_to_block() on add, and
by ocelot_vcap_block_remove_filter() on del. So "i" is the new filter
index, and "i - 1" or "i + 1" respectively are the old addresses of that
TCAM entry (we only support installing/deleting one filter at a time).

Fixes: b5962294

 ("net: mscc: ocelot: Add support for tcam")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Once the CPU port was added to the destination port mask of a packet, it
can never be cleared, so even packets marked as dropped by the MASK_MODE
of a VCAP IS2 filter will still reach it. This is why we need the
OCELOT_POLICER_DISCARD to "kill dropped packets dead" and make software
stop seeing them.

We disallow policer rules from being put on any other chain than the one
for the first lookup, but we don't do this for "drop" rules, although we
should. This change is merely ascertaining that the rules dont't
(completely) work and letting the user know.

The blamed commit is the one that introduced the multi-chain architecture
in ocelot. Prior to that, we should have always offloaded the filters to
VCAP IS2 lookup 0, where they did work.

Fixes: 1397a2eb

 ("net: mscc: ocelot: create TCAM skeleton from tc filter chains")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The VCAP IS2 TCAM is looked up twice per packet, and each filter can be
configured to only match during the first, second lookup, or both, or
none.

The blamed commit wrote the code for making VCAP IS2 filters match only
on the given lookup. But right below that code, there was another line
that explicitly made the lookup a "don't care", and this is overwriting
the lookup we've selected. So the code had no effect.

Some of the more noticeable effects of having filters match on both
lookups:

- in "tc -s filter show dev swp0 ingress", we see each packet matching a
  VCAP IS2 filter counted twice. This throws off scripts such as
  tools/testing/selftests/net/forwarding/tc_actions.sh and makes them
  fail.

- a "tc-drop" action offloaded to VCAP IS2 needs a policer as well,
  because once the CPU port becomes a member of the destination port
  mask of a packet, nothing removes it, not even a PERMIT/DENY mask mode
  with a port mask of 0. But VCAP IS2 rules with the POLICE_ENA bit in
  the action vector can only appear in the first lookup. What happens
  when a filter matches both lookups is that the action vector is
  combined, and this makes the POLICE_ENA bit ineffective, since the
  last lookup in which it has appeared is the second one. In other
  words, "tc-drop" actions do not drop packets for the CPU port, dropped
  packets are still seen by software unless there was an FDB entry that
  directed those packets to some other place different from the CPU.

The last bit used to work, because in the initial commit b5962294
("net: mscc: ocelot: Add support for tcam"), we were writing the FIRST
field of the VCAP IS2 half key with a 1, not with a "don't care".
The change to "don't care" was made inadvertently by me in commit
c1c3993e ("net: mscc: ocelot: generalize existing code for VCAP"),
which I just realized, and which needs a separate fix from this one,
for "stable" kernels that lack the commit blamed below.

Fixes: 226e9cd8

 ("net: mscc: ocelot: only install TCAM entries into a specific lookup and PAG")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ocelot_vcap_filter_del() works by moving the next filters over the
current one, and then deleting the last filter by calling vcap_entry_set()
with a del_filter which was specially created by memsetting its memory
to zeroes. vcap_entry_set() then programs this to the TCAM and action
RAM via the cache registers.

The problem is that vcap_entry_set() is a dispatch function which looks
at del_filter->block_id. But since del_filter is zeroized memory, the
block_id is 0, or otherwise said, VCAP_ES0. So practically, what we do
is delete the entry at the same TCAM index from VCAP ES0 instead of IS1
or IS2.

The code was not always like this. vcap_entry_set() used to simply be
is2_entry_set(), and then, the logic used to work.

Restore the functionality by populating the block_id of the del_filter
based on the VCAP block of the filter that we're deleting. This makes
vcap_entry_set() know what to do.

Fixes: 1397a2eb

 ("net: mscc: ocelot: create TCAM skeleton from tc filter chains")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Since the blamed commit, VCAP filters can appear on more than one list.
If their action is "trap", they are chained on ocelot->traps via
filter->trap_list. This is in addition to their normal placement on the
VCAP block->rules list head.

Therefore, when we free a VCAP filter, we must remove it from all lists
it is a member of, including ocelot->traps.

There are at least 2 bugs which are direct consequences of this design
decision.

First is the incorrect usage of list_empty(), meant to denote whether
"filter" is chained into ocelot->traps via filter->trap_list.
This does not do the correct thing, because list_empty() checks whether
"head->next == head", but in our case, head->next == head->prev == NULL.
So we dereference NULL pointers and die when we call list_del().

Second is the fact that not all places that should remove the filter
from ocelot->traps do so. One example is ocelot_vcap_block_remove_filter(),
which is where we have the main kfree(filter). By keeping freed filters
in ocelot->traps we end up in a use-after-free in
felix_update_trapping_destinations().

Attempting to fix all the buggy patterns is a whack-a-mole game which
makes the driver unmaintainable. Actually this is what the previous
patch version attempted to do:
https://patchwork.kernel.org/project/netdevbpf/patch/20220503115728.834457-3-vladimir.oltean@nxp.com/

but it introduced another set of bugs, because there are other places in
which create VCAP filters, not just ocelot_vcap_filter_create():

- ocelot_trap_add()
- felix_tag_8021q_vlan_add_rx()
- felix_tag_8021q_vlan_add_tx()

Relying on the convention that all those code paths must call
INIT_LIST_HEAD(&filter->trap_list) is not going to scale.

So let's do what should have been done in the first place and keep a
bool in struct ocelot_vcap_filter which denotes whether we are looking
at a trapping rule or not. Iterating now happens over the main VCAP IS2
block->rules. The advantage is that we no longer risk having stale
references to a freed filter, since it is only present in that list.

Fixes: e42bd4ed

 ("net: mscc: ocelot: keep traps in a list")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The bonding entry did not include additional include files that have
been added nor did it reference the documentation. Add these references
for completeness.

Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Link: https://lore.kernel.org/r/903ed2906b93628b38a2015664a20d2802042863.1651690748.git.jtoppins@redhat.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The find_next_netdev_feature() macro gets the "remaining length",
not bit index.
Passing "bit - 1" for the following iteration is wrong as it skips
the adjacent bit. Pass "bit" instead.

Fixes: 3b89ea9c

 ("net: Fix for_each_netdev_feature on Big endian")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://lore.kernel.org/r/20220504080914.1918-1-tariqt@nvidia.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Nicolas Dichtel says:

====================
vrf: fix address binding with icmp socket

The first patch fixes the issue.
The second patch adds related tests in selftests.
====================

Link: https://lore.kernel.org/r/20220504090739.21821-1-nicolas.dichtel@6wind.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The 'ping' utility is able to manage two kind of sockets (raw or icmp),
depending on the sysctl ping_group_range. By default, ping_group_range is
set to '1 0', which forces ping to use an ip raw socket.

Let's replay the ping tests by allowing 'ping' to use the ip icmp socket.
After the previous patch, ipv4 tests results are the same with both kinds
of socket. For ipv6, there are a lot a new failures (the previous patch
fixes only two cases).

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When ping_group_range is updated, 'ping' uses the DGRAM ICMP socket,
instead of an IP raw socket. In this case, 'ping' is unable to bind its
socket to a local address owned by a vrflite.

Before the patch:
$ sysctl -w net.ipv4.ping_group_range='0  2147483647'
$ ip link add blue type vrf table 10
$ ip link add foo type dummy
$ ip link set foo master blue
$ ip link set foo up
$ ip addr add 192.168.1.1/24 dev foo
$ ip addr add 2001::1/64 dev foo
$ ip vrf exec blue ping -c1 -I 192.168.1.1 192.168.1.2
ping: bind: Cannot assign requested address
$ ip vrf exec blue ping6 -c1 -I 2001::1 2001::2
ping6: bind icmp socket: Cannot assign requested address

CC: stable@vger.kernel.org
Fixes: 1b69c6d0

 ("net: Introduce L3 Master device abstraction")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit f1131b9c ("net: phy: micrel: use
kszphy_suspend()/kszphy_resume for irq aware devices") the kszphy_suspend/
resume hooks are used.

These functions require the probe function to be called so that
priv can be allocated.

Otherwise, a NULL pointer dereference happens inside
kszphy_config_reset().

Cc: stable@vger.kernel.org
Fixes: f1131b9c

 ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices")
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220504143104.1286960-2-festevam@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit f1131b9c ("net: phy: micrel: use
kszphy_suspend()/kszphy_resume for irq aware devices") the following
NULL pointer dereference is observed on a board with KSZ8061:

 # udhcpc -i eth0
udhcpc: started, v1.35.0
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000008
pgd = f73cef4e
[00000008] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 196 Comm: ifconfig Not tainted 5.15.37-dirty #94
Hardware name: Freescale i.MX6 SoloX (Device Tree)
PC is at kszphy_config_reset+0x10/0x114
LR is at kszphy_resume+0x24/0x64
...

The KSZ8061 phy_driver structure does not have the .probe/..driver_data
fields, which means that priv is not allocated.

This causes the NULL pointer dereference inside kszphy_config_reset().

Fix the problem by using the generic suspend/resume functions as before.

Another alternative would be to provide the .probe and .driver_data
information into the structure, but to be on the safe side, let's
just restore Ethernet functionality by using the generic suspend/resume.

Cc: stable@vger.kernel.org
Fixes: f1131b9c

 ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220504143104.1286960-1-festevam@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Eric Dumazet is reporting addition on 0 problem at rds_tcp_tune(), for
delayed works queued in rds_wq might be invoked after a net namespace's
refcount already reached 0.

Since rds_tcp_exit_net() from cleanup_net() calls flush_workqueue(rds_wq),
it is guaranteed that we can instead use maybe_get_net() from delayed work
functions until rds_tcp_exit_net() returns.

Note that I'm not convinced that all works which might access a net
namespace are already queued in rds_wq by the moment rds_tcp_exit_net()
calls flush_workqueue(rds_wq). If some race is there, rds_tcp_exit_net()
will fail to wait for work functions, and kmem_cache_free() could be
called from net_free() before maybe_get_net() is called from
rds_tcp_tune().

Reported-by: Eric Dumazet <edumazet@google.com>
Fixes: 3a58f13a

 ("net: rds: acquire refcount on TCP sockets")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/41d09faf-bc78-1a87-dfd1-c6d1b5984b61@I-love.SAKURA.ne.jp


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from can, rxrpc and wireguard.

  Previous releases - regressions:

   - igmp: respect RCU rules in ip_mc_source() and ip_mc_msfilter()

   - mld: respect RCU rules in ip6_mc_source() and ip6_mc_msfilter()

   - rds: acquire netns refcount on TCP sockets

   - rxrpc: enable IPv6 checksums on transport socket

   - nic: hinic: fix bug of wq out of bound access

   - nic: thunder: don't use pci_irq_vector() in atomic context

   - nic: bnxt_en: fix possible bnxt_open() failure caused by wrong RFS
     flag

   - nic: mlx5e:
      - lag, fix use-after-free in fib event handler
      - fix deadlock in sync reset flow

  Previous releases - always broken:

   - tcp: fix insufficient TCP source port randomness

   - can: grcan: grcan_close(): fix deadlock

   - nfc: reorder destructive operations in to avoid bugs

  Misc:

   - wireguard: improve selftests reliability"

* tag 'net-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
  NFC: netlink: fix sleep in atomic bug when firmware download timeout
  selftests: ocelot: tc_flower_chains: specify conform-exceed action for policer
  tcp: drop the hash_32() part from the index calculation
  tcp: increase source port perturb table to 2^16
  tcp: dynamically allocate the perturb table used by source ports
  tcp: add small random increments to the source port
  tcp: resalt the secret every 10 seconds
  tcp: use different parts of the port_offset for index and offset
  secure_seq: use the 64 bits of the siphash for port offset calculation
  wireguard: selftests: set panic_on_warn=1 from cmdline
  wireguard: selftests: bump package deps
  wireguard: selftests: restore support for ccache
  wireguard: selftests: use newer toolchains to fill out architectures
  wireguard: selftests: limit parallelism to $(nproc) tests at once
  wireguard: selftests: make routing loop test non-fatal
  net/mlx5: Fix matching on inner TTC
  net/mlx5: Avoid double clear or set of sync reset requested
  net/mlx5: Fix deadlock in sync reset flow
  net/mlx5e: Fix trust state reset in reload
  net/mlx5e: Avoid checking offload capability in post_parse action
  ...

There are sleep in atomic bug that could cause kernel panic during
firmware download process. The root cause is that nlmsg_new with
GFP_KERNEL parameter is called in fw_dnld_timeout which is a timer
handler. The call trace is shown below:

BUG: sleeping function called from invalid context at include/linux/sched/mm.h:265
Call Trace:
kmem_cache_alloc_node
__alloc_skb
nfc_genl_fw_download_done
call_timer_fn
__run_timers.part.0
run_timer_softirq
__do_softirq
...

The nlmsg_new with GFP_KERNEL parameter may sleep during memory
allocation process, and the timer handler is run as the result of
a "software interrupt" that should not call any other function
that could sleep.

This patch changes allocation mode of netlink message from GFP_KERNEL
to GFP_ATOMIC in order to prevent sleep in atomic bug. The GFP_ATOMIC
flag makes memory allocation operation could be used in atomic context.

Fixes: 9674da87 ("NFC: Add firmware upload netlink command")
Fixes: 9ea7187c

 ("NFC: netlink: Rename CMD_FW_UPLOAD to CMD_FW_DOWNLOAD")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220504055847.38026-1-duoming@zju.edu.cn


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

As discussed here with Ido Schimmel:
https://patchwork.kernel.org/project/netdevbpf/patch/20220224102908.5255-2-jianbol@nvidia.com/

the default conform-exceed action is "reclassify", for a reason we don't
really understand.

The point is that hardware can't offload that police action, so not
specifying "conform-exceed" was always wrong, even though the command
used to work in hardware (but not in software) until the kernel started
adding validation for it.

Fix the command used by the selftest by making the policer drop on
exceed, and pass the packet to the next action (goto) on conform.

Fixes: 8cd6b020

 ("selftests: ocelot: add some example VCAP IS1, IS2 and ES0 tc offloads")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220503121428.842906-1-vladimir.oltean@nxp.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Willy Tarreau says:

====================
insufficient TCP source port randomness

In a not-yet published paper, Moshe Kol, Amit Klein, and Yossi Gilad
report being able to accurately identify a client by forcing it to emit
only 40 times more connections than the number of entries in the
table_perturb[] table, which is indexed by hashing the connection tuple.
The current 2^8 setting allows them to perform that attack with only 10k
connections, which is not hard to achieve in a few seconds.

Eric, Amit and I have been working on this for a few weeks now imagining,
testing and eliminating a number of approaches that Amit and his team were
still able to break or that were found to be too risky or too expensive,
and ended up with the simple improvements in this series that resists to
the attack, doesn't degrade the performance, and preserves a reliable port
selection algorithm to avoid connection failures, including the odd/even
port selection preference that allows bind() to always find a port quickly
even under strong connect() stress.

The approach relies on several factors:
  - resalting the hash secret that's used to choose the table_perturb[]
    entry every 10 seconds to eliminate slow attacks and force the
    attacker to forget everything that was learned after this delay.
    This already eliminates most of the problem because if a client
    stays silent for more than 10 seconds there's no link between the
    previous and the next patterns, and 10s isn't yet frequent enough
    to cause too frequent repetition of a same port that may induce a
    connection failure ;

  - adding small random increments to the source port. Previously, a
    random 0 or 1 was added every 16 ports. Now a random 0 to 7 is
    added after each port. This means that with the default 32768-60999
    range, a worst case rollover happens after 1764 connections, and
    an average of 3137. This doesn't stop statistical attacks but
    requires significantly more iterations of the same attack to
    confirm a guess.

  - increasing the table_perturb[] size from 2^8 to 2^16, which Amit
    says will require 2.6 million connections to be attacked with the
    changes above, making it pointless to get a fingerprint that will
    only last 10 seconds. Due to the size, the table was made dynamic.

  - a few minor improvements on the bits used from the hash, to eliminate
    some unfortunate correlations that may possibly have been exploited
    to design future attack models.

These changes were tested under the most extreme conditions, up to
1.1 million connections per second to one and a few targets, showing no
performance regression, and only 2 connection failures within 13 billion,
which is less than 2^-32 and perfectly within usual values.

The series is split into small reviewable changes and was already reviewed
by Amit and Eric.
====================

Link: https://lore.kernel.org/r/20220502084614.24123-1-w@1wt.eu


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In commit 190cc824

 ("tcp: change source port randomizarion at
connect() time"), the table_perturb[] array was introduced and an
index was taken from the port_offset via hash_32(). But it turns
out that hash_32() performs a multiplication while the input here
comes from the output of SipHash in secure_seq, that is well
distributed enough to avoid the need for yet another hash.

Suggested-by: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Moshe Kol, Amit Klein, and Yossi Gilad reported being able to accurately
identify a client by forcing it to emit only 40 times more connections
than there are entries in the table_perturb[] table. The previous two
improvements consisting in resalting the secret every 10s and adding
randomness to each port selection only slightly improved the situation,
and the current value of 2^8 was too small as it's not very difficult
to make a client emit 10k connections in less than 10 seconds.

Thus we're increasing the perturb table from 2^8 to 2^16 so that the
same precision now requires 2.6M connections, which is more difficult in
this time frame and harder to hide as a background activity. The impact
is that the table now uses 256 kB instead of 1 kB, which could mostly
affect devices making frequent outgoing connections. However such
components usually target a small set of destinations (load balancers,
database clients, perf assessment tools), and in practice only a few
entries will be visited, like before.

A live test at 1 million connections per second showed no performance
difference from the previous value.

Reported-by: Moshe Kol <moshe.kol@mail.huji.ac.il>
Reported-by: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Reported-by: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We'll need to further increase the size of this table and it's likely
that at some point its size will not be suitable anymore for a static
table. Let's allocate it on boot from inet_hashinfo2_init(), which is
called from tcp_init().

Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Here we're randomly adding between 0 and 7 random increments to the
selected source port in order to add some noise in the source port
selection that will make the next port less predictable.

With the default port range of 32768-60999 this means a worst case
reuse scenario of 14116/8=1764 connections between two consecutive
uses of the same port, with an average of 14116/4.5=3137. This code
was stressed at more than 800000 connections per second to a fixed
target with all connections closed by the client using RSTs (worst
condition) and only 2 connections failed among 13 billion, despite
the hash being reseeded every 10 seconds, indicating a perfectly
safe situation.

Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In order to limit the ability for an observer to recognize the source
ports sequence used to contact a set of destinations, we should
periodically shuffle the secret. 10 seconds looks effective enough
without causing particular issues.

Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Amit Klein suggests that we use different parts of port_offset for the
table's index and the port offset so that there is no direct relation
between them.

Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

SipHash replaced MD5 in secure_ipv{4,6}_port_ephemeral() via commit
7cd23e53

 ("secure_seq: use SipHash in place of MD5"), but the output
remained truncated to 32-bit only. In order to exploit more bits from the
hash, let's make the functions return the full 64-bit of siphash_3u32().
We also make sure the port offset calculation in __inet_hash_connect()
remains done on 32-bit to avoid the need for div_u64_rem() and an extra
cost on 32-bit systems.

Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Jason A. Donenfeld says:

====================
wireguard patches for 5.18-rc6

In working on some other problems, I wound up leaning on the WireGuard
CI more than usual and uncovered a few small issues with reliability.
These are fairly low key changes, since they don't impact kernel code
itself.

One change does stick out in particular, though, which is the "make
routing loop test non-fatal" commit. I'm not thrilled about doing this,
but currently [1] remains unsolved, and I'm still working on a real
solution to that (hopefully for 5.19 or 5.20 if I can come up with a
good idea...), so for now that test just prints a big red warning
instead.

[1] https://lore.kernel.org/netdev/YmszSXueTxYOC41G@zx2c4.com/
====================

Link: https://lore.kernel.org/r/20220504202920.72908-1-Jason@zx2c4.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Rather than setting this once init is running, set panic_on_warn from
the kernel command line, so that it catches splats from WireGuard
initialization code and the various crypto selftests.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use newer, more reliable package dependencies. These should hopefully
reduce flakes. However, we keep the old iputils package, as it
accumulated bugs after resulting in flakes on slow machines.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When moving to non-system toolchains, we inadvertantly killed the
ability to use ccache. So instead, build ccache support into the test
harness directly.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Rather than relying on the system to have cross toolchains available,
simply download musl.cc's ones and use that libc.so, and then we use it
to fill in a few missing platforms, such as riscv64, riscv64, powerpc64,
and s390x.

Since riscv doesn't have a second serial port in its device description,
we have to use virtio's vport. This is actually the same situation on
ARM, but we were previously hacking QEMU up to work around this, which
required a custom QEMU. Instead just do the vport trick on ARM too.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The parallel tests were added to catch queueing issues from multiple
cores. But what happens in reality when testing tons of processes is
that these separate threads wind up fighting with the scheduler, and we
wind up with contention in places we don't care about that decrease the
chances of hitting a bug. So just do a test with the number of CPU
cores, rather than trying to scale up arbitrarily.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

I hate to do this, but I still do not have a good solution to actually
fix this bug across architectures. So just disable it for now, so that
the CI can still deliver actionable results. This commit adds a large
red warning, so that at least the failure isn't lost forever, and
hopefully this can be revisited down the line.

Link: https://lore.kernel.org/netdev/CAHmME9pv1x6C4TNdL6648HydD8r+txpV4hTUXOBVkrapBXH4QQ@mail.gmail.com/
Link: https://lore.kernel.org/netdev/YmszSXueTxYOC41G@zx2c4.com/
Link: https://lore.kernel.org/wireguard/CAHmME9rNnBiNvBstb7MPwK-7AmAN0sOfnhdR=eeLrowWcKxaaQ@mail.gmail.com/


Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull iommu fixes from Joerg Roedel:
 "IOMMU core:

   - Fix for a regression which could cause NULL-ptr dereferences

  Arm SMMU:

   - Fix off-by-one in SMMUv3 SVA TLB invalidation

   - Disable large mappings to workaround nvidia erratum

  Intel VT-d:

   - Handle PCI stop marker messages in IOMMU driver to meet the
     requirement of I/O page fault handling framework.

   - Calculate a feasible mask for non-aligned page-selective IOTLB
     invalidation.

  Apple DART IOMMU:

   - Fix potential NULL-ptr dereference

   - Set module owner"

* tag 'iomm-fixes-v5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu: Make sysfs robust for non-API groups
  iommu/dart: Add missing module owner to ops structure
  iommu/dart: check return value after calling platform_get_resource()
  iommu/vt-d: Drop stop marker messages
  iommu/vt-d: Calculate mask for non-aligned flushes
  iommu: arm-smmu: disable large page mappings for Nvidia arm-smmu
  iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()

Pull IPMI fixes from Corey Minyard:
 "Fix some issues that were reported.

  This has been in for-next for a bit (longer than the times would
  indicate, I had to rebase to add some text to the headers) and these
  are fixes that need to go in"

* tag 'for-linus-5.17-2' of https://github.com/cminyard/linux-ipmi:
  ipmi:ipmi_ipmb: Fix null-ptr-deref in ipmi_unregister_smi()
  ipmi: When handling send message responses, don't process the message

Groups created by VFIO backends outside the core IOMMU API should never
be passed directly into the API itself, however they still expose their
standard sysfs attributes, so we can still stumble across them that way.
Take care to consider those cases before jumping into our normal
assumptions of a fully-initialised core API group.

Fixes: 3f6634d9

 ("iommu: Use right way to retrieve iommu_ops")
Reported-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/86ada41986988511a8424e84746dfe9ba7f87573.1651667683.git.robin.murphy@arm.com


Signed-off-by: Joerg Roedel <jroedel@suse.de>

it/saeed/linux

Saeed Mahameed says:

====================
mlx5 fixes 2022-05-03

This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

This is required to make loading this as a module work.

Signed-off-by: Hector Martin <marcan@marcan.st>
Fixes: 46d1fb07

 ("iommu/dart: Add DART iommu driver")
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20220502092238.30486-1-marcan@marcan.st


Signed-off-by: Joerg Roedel <jroedel@suse.de>