It turns out that jump_label_text_reserved() was reporting __init text
as being reserved past the time when the __init text was freed and
re-used.

For a long time, this resulted in, at worst, not being able to kprobe
text that happened to land at the re-used address. However a recent
commit e7bf1ba9 ("jump_label, x86: Emit short JMP") made it a
fatal mistake because it now needs to read the instruction in order to
determine the conflict -- an instruction that's no longer there.

Fixes: 4c3ef6d7

 ("jump label: Add jump_label_text_reserved() to reserve jump points")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20210628113045.045141693@infradead.org

When enabling CONFIG_LOCK_STAT=y, then CONFIG_LOCKDEP=y is forcedly enabled,
but CONFIG_PROVE_LOCKING is disabled.

We can get output from /proc/lockdep, which currently includes usages of
lock classes. But the usages are meaningless, see the output below:

	/ # cat /proc/lockdep
	all lock classes:
	ffffffff9af63350 ....: cgroup_mutex

	ffffffff9af54eb8 ....: (console_sem).lock

	ffffffff9af54e60 ....: console_lock

	ffffffff9ae74c38 ....: console_owner_lock

	ffffffff9ae74c80 ....: console_owner

	ffffffff9ae66e60 ....: cpu_hotplug_lock

Only one usage context for each lock, this is because each usage is only
changed in mark_lock() that is in the CONFIG_PROVE_LOCKING=y section,
however in the test situation, it's not.

The fix is to move the usages reading and seq_print from the
!CONFIG_PROVE_LOCKING section to its defined section.

Also, locks_after list of lock_class is empty when !CONFIG_PROVE_LOCKING,
so do the same thing as what have done for usages of lock classes.

With this patch with !CONFIG_PROVE_LOCKING we can get the results below:

	/ # cat /proc/lockdep
	all lock classes:
	ffffffff85163290: cgroup_mutex
	ffffffff85154dd8: (console_sem).lock
	ffffffff85154d80: console_lock
	ffffffff85074b58: console_owner_lock
	ffffffff85074ba0: console_owner
	ffffffff85066d60: cpu_hotplug_lock

... a class key and the relevant class name each line.

Signed-off-by: Xiongwei Song <sxwjean@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/20210629135916.308210-1-sxwjean@me.com

Pull x86 splitlock updates from Ingo Molnar:

 - Add the "ratelimit:N" parameter to the split_lock_detect= boot
   option, to rate-limit the generation of bus-lock exceptions.

   This is both easier on system resources and kinder to offending
   applications than the current policy of outright killing them.

 - Document the split-lock detection feature and its parameters.

* tag 'x86-splitlock-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation/x86: Add ratelimit in buslock.rst
  Documentation/admin-guide: Add bus lock ratelimit
  x86/bus_lock: Set rate limit for bus lock
  Documentation/x86: Add buslock.rst

Pull x86 mm update from Ingo Molnar:
 "Do not create the x86/init_pkru debugfs file if the CPU doesn't
  support PKRU"

* tag 'x86-mm-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/pkeys: Skip 'init_pkru' debugfs file creation when pkeys not supported

Pull x86 uapi fixlet from Ingo Molnar:
 "Fix the <uapi/asm/hwcap2.h> UAPI header to build in user-space too"

* tag 'x86-misc-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/elf: Use _BITUL() macro in UAPI headers

Pull x86 cleanups from Ingo Molnar:
 "Misc cleanups & removal of obsolete code"

* tag 'x86-cleanups-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sgx: Correct kernel-doc's arg name in sgx_encl_release()
  doc: Remove references to IBM Calgary
  x86/setup: Document that Windows reserves the first MiB
  x86/crash: Remove crash_reserve_low_1M()
  x86/setup: Remove CONFIG_X86_RESERVE_LOW and reservelow= options
  x86/alternative: Align insn bytes vertically
  x86: Fix leftover comment typos
  x86/asm: Simplify __smp_mb() definition
  x86/alternatives: Make the x86nops[] symbol static

Pull x86 resource control documentation fixes from Ingo Molnar:
 "Fix Docbook comments in the x86/resctrl code"

* tag 'x86-cache-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Fix kernel-doc in internal.h
  x86/resctrl: Fix kernel-doc in pseudo_lock.c

Pull x86 boot update from Ingo Molnar:
 "Modernize the genimage.sh script, add a 'hdimage' target and EFI
  support"

* tag 'x86-boot-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Modernize genimage script; hdimage+EFI support

Pull x86 asm updates from Ingo Molnar:

 - Micro-optimize and standardize the do_syscall_64() calling convention

 - Make syscall entry flags clearing more conservative

 - Clean up syscall table handling

 - Clean up & standardize assembly macros, in preparation of FRED

 - Misc cleanups and fixes

* tag 'x86-asm-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asm: Make <asm/asm.h> valid on cross-builds as well
  x86/regs: Syscall_get_nr() returns -1 for a non-system call
  x86/entry: Split PUSH_AND_CLEAR_REGS into two submacros
  x86/syscall: Maximize MSR_SYSCALL_MASK
  x86/syscall: Unconditionally prototype {ia32,x32}_sys_call_table[]
  x86/entry: Reverse arguments to do_syscall_64()
  x86/entry: Unify definitions from <asm/calling.h> and <asm/ptrace-abi.h>
  x86/asm: Use _ASM_BYTES() in <asm/nops.h>
  x86/asm: Add _ASM_BYTES() macro for a .byte ... opcode sequence
  x86/asm: Have the __ASM_FORM macros handle commas in arguments

Pull x86 exception handling updates from Ingo Molnar:

 - Clean up & simplify AP exception handling setup.

 - Consolidate the disjoint IDT setup code living in idt_setup_traps()
   and idt_setup_ist_traps() into a single idt_setup_traps()
   initialization function and call it before cpu_init().

* tag 'x86-apic-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/idt: Rework IDT setup for boot CPU
  x86/cpu: Init AP exception handling from cpu_init_secondary()

Pull timers/nohz updates from Ingo Molnar:

 - Micro-optimize tick_nohz_full_cpu()

 - Optimize idle exit tick restarts to be less eager

 - Optimize tick_nohz_dep_set_task() to only wake up a single CPU.
   This reduces IPIs and interruptions on nohz_full CPUs.

 - Optimize tick_nohz_dep_set_signal() in a similar fashion.

 - Skip IPIs in tick_nohz_kick_task() when trying to kick a
   non-running task.

 - Micro-optimize tick_nohz_task_switch() IRQ flags handling to
   reduce context switching costs.

 - Misc cleanups and fixes

* tag 'timers-nohz-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  MAINTAINERS: Add myself as context tracking maintainer
  tick/nohz: Call tick_nohz_task_switch() with interrupts disabled
  tick/nohz: Kick only _queued_ task whose tick dependency is updated
  tick/nohz: Change signal tick dependency to wake up CPUs of member tasks
  tick/nohz: Only wake up a single target cpu when kicking a task
  tick/nohz: Update nohz_full Kconfig help
  tick/nohz: Update idle_exittime on actual idle exit
  tick/nohz: Remove superflous check for CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
  tick/nohz: Conditionally restart tick on idle exit
  tick/nohz: Evaluate the CPU expression after the static key

Pull scheduler udpates from Ingo Molnar:

 - Changes to core scheduling facilities:

    - Add "Core Scheduling" via CONFIG_SCHED_CORE=y, which enables
      coordinated scheduling across SMT siblings. This is a much
      requested feature for cloud computing platforms, to allow the
      flexible utilization of SMT siblings, without exposing untrusted
      domains to information leaks & side channels, plus to ensure more
      deterministic computing performance on SMT systems used by
      heterogenous workloads.

      There are new prctls to set core scheduling groups, which allows
      more flexible management of workloads that can share siblings.

    - Fix task->state access anti-patterns that may result in missed
      wakeups and rename it to ->__state in the process to catch new
      abuses.

 - Load-balancing changes:

    - Tweak newidle_balance for fair-sched, to improve 'memcache'-like
      workloads.

    - "Age" (decay) average idle time, to better track & improve
      workloads such as 'tbench'.

    - Fix & improve energy-aware (EAS) balancing logic & metrics.

    - Fix & improve the uclamp metrics.

    - Fix task migration (taskset) corner case on !CONFIG_CPUSET.

    - Fix RT and deadline utilization tracking across policy changes

    - Introduce a "burstable" CFS controller via cgroups, which allows
      bursty CPU-bound workloads to borrow a bit against their future
      quota to improve overall latencies & batching. Can be tweaked via
      /sys/fs/cgroup/cpu/<X>/cpu.cfs_burst_us.

    - Rework assymetric topology/capacity detection & handling.

 - Scheduler statistics & tooling:

    - Disable delayacct by default, but add a sysctl to enable it at
      runtime if tooling needs it. Use static keys and other
      optimizations to make it more palatable.

    - Use sched_clock() in delayacct, instead of ktime_get_ns().

 - Misc cleanups and fixes.

* tag 'sched-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
  sched/doc: Update the CPU capacity asymmetry bits
  sched/topology: Rework CPU capacity asymmetry detection
  sched/core: Introduce SD_ASYM_CPUCAPACITY_FULL sched_domain flag
  psi: Fix race between psi_trigger_create/destroy
  sched/fair: Introduce the burstable CFS controller
  sched/uclamp: Fix uclamp_tg_restrict()
  sched/rt: Fix Deadline utilization tracking during policy change
  sched/rt: Fix RT utilization tracking during policy change
  sched: Change task_struct::state
  sched,arch: Remove unused TASK_STATE offsets
  sched,timer: Use __set_current_state()
  sched: Add get_current_state()
  sched,perf,kvm: Fix preemption condition
  sched: Introduce task_is_running()
  sched: Unbreak wakeups
  sched/fair: Age the average idle time
  sched/cpufreq: Consider reduced CPU capacity in energy calculation
  sched/fair: Take thermal pressure into account while estimating energy
  thermal/cpufreq_cooling: Update offline CPUs per-cpu thermal_pressure
  sched/fair: Return early from update_tg_cfs_load() if delta == 0
  ...

Pull perf events updates from Ingo Molnar:

 - Platform PMU driver updates:

     - x86 Intel uncore driver updates for Skylake (SNR) and Icelake (ICX) servers
     - Fix RDPMC support
     - Fix [extended-]PEBS-via-PT support
     - Fix Sapphire Rapids event constraints
     - Fix :ppp support on Sapphire Rapids
     - Fix fixed counter sanity check on Alder Lake & X86_FEATURE_HYBRID_CPU
     - Other heterogenous-PMU fixes

 - Kprobes:

     - Remove the unused and misguided kprobe::fault_handler callbacks.
     - Warn about kprobes taking a page fault.
     - Fix the 'nmissed' stat counter.

 - Misc cleanups and fixes.

* tag 'perf-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix task context PMU for Hetero
  perf/x86/intel: Fix instructions:ppp support in Sapphire Rapids
  perf/x86/intel: Add more events requires FRONTEND MSR on Sapphire Rapids
  perf/x86/intel: Fix fixed counter check warning for some Alder Lake
  perf/x86/intel: Fix PEBS-via-PT reload base value for Extended PEBS
  perf/x86: Reset the dirty counter to prevent the leak for an RDPMC task
  kprobes: Do not increment probe miss count in the fault handler
  x86,kprobes: WARN if kprobes tries to handle a fault
  kprobes: Remove kprobe::fault_handler
  uprobes: Update uprobe_write_opcode() kernel-doc comment
  perf/hw_breakpoint: Fix DocBook warnings in perf hw_breakpoint
  perf/core: Fix DocBook warnings
  perf/core: Make local function perf_pmu_snapshot_aux() static
  perf/x86/intel/uncore: Enable I/O stacks to IIO PMON mapping on ICX
  perf/x86/intel/uncore: Enable I/O stacks to IIO PMON mapping on SNR
  perf/x86/intel/uncore: Generalize I/O stacks to PMON mapping procedure
  perf/x86/intel/uncore: Drop unnecessary NULL checks after container_of()

Pull locking updates from Ingo Molnar:

 - Core locking & atomics:

     - Convert all architectures to ARCH_ATOMIC: move every architecture
       to ARCH_ATOMIC, then get rid of ARCH_ATOMIC and all the
       transitory facilities and #ifdefs.

       Much reduction in complexity from that series:

           63 files changed, 756 insertions(+), 4094 deletions(-)

     - Self-test enhancements

 - Futexes:

     - Add the new FUTEX_LOCK_PI2 ABI, which is a variant that doesn't
       set FLAGS_CLOCKRT (.e. uses CLOCK_MONOTONIC).

       [ The temptation to repurpose FUTEX_LOCK_PI's implicit setting of
         FLAGS_CLOCKRT & invert the flag's meaning to avoid having to
         introduce a new variant was resisted successfully. ]

     - Enhance futex self-tests

 - Lockdep:

     - Fix dependency path printouts

     - Optimize trace saving

     - Broaden & fix wait-context checks

 - Misc cleanups and fixes.

* tag 'locking-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
  locking/lockdep: Correct the description error for check_redundant()
  futex: Provide FUTEX_LOCK_PI2 to support clock selection
  futex: Prepare futex_lock_pi() for runtime clock selection
  lockdep/selftest: Remove wait-type RCU_CALLBACK tests
  lockdep/selftests: Fix selftests vs PROVE_RAW_LOCK_NESTING
  lockdep: Fix wait-type for empty stack
  locking/selftests: Add a selftest for check_irq_usage()
  lockding/lockdep: Avoid to find wrong lock dep path in check_irq_usage()
  locking/lockdep: Remove the unnecessary trace saving
  locking/lockdep: Fix the dep path printing for backwards BFS
  selftests: futex: Add futex compare requeue test
  selftests: futex: Add futex wait test
  seqlock: Remove trailing semicolon in macros
  locking/lockdep: Reduce LOCKDEP dependency list
  locking/lockdep,doc: Improve readability of the block matrix
  locking/atomics: atomic-instrumented: simplify ifdeffery
  locking/atomic: delete !ARCH_ATOMIC remnants
  locking/atomic: xtensa: move to ARCH_ATOMIC
  locking/atomic: sparc: move to ARCH_ATOMIC
  locking/atomic: sh: move to ARCH_ATOMIC
  ...

Merge tags 'objtool-urgent-2021-06-28' and 'objtool-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull objtool fix and updates from Ingo Molnar:
 "An ELF format fix for a section flags mismatch bug that breaks kernel
  tooling such as kpatch-build.

  The biggest change in this cycle is the new code to handle and rewrite
  variable sized jump labels - which results in slightly tighter code
  generation in hot paths, through the use of short(er) NOPs.

  Also a number of cleanups and fixes, and a change to the generic
  include/linux/compiler.h to handle a s390 GCC quirk"

* tag 'objtool-urgent-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Don't make .altinstructions writable

* tag 'objtool-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Improve reloc hash size guestimate
  instrumentation.h: Avoid using inline asm operand modifiers
  compiler.h: Avoid using inline asm operand modifiers
  kbuild: Fix objtool dependency for 'OBJECT_FILES_NON_STANDARD_<obj> := n'
  objtool: Reflow handle_jump_alt()
  jump_label/x86: Remove unused JUMP_LABEL_NOP_SIZE
  jump_label, x86: Allow short NOPs
  objtool: Provide stats for jump_labels
  objtool: Rewrite jump_label instructions
  objtool: Decode jump_entry::key addend
  jump_label, x86: Emit short JMP
  jump_label: Free jump_entry::key bit1 for build use
  jump_label, x86: Add variable length patching support
  jump_label, x86: Introduce jump_entry_size()
  jump_label, x86: Improve error when we fail expected text
  jump_label, x86: Factor out the __jump_table generation
  jump_label, x86: Strip ASM jump_label support
  x86, objtool: Dont exclude arch/x86/realmode/
  objtool: Rewrite hashtable sizing

Pull EFI updates from Ingo Molnar:
 "Two driver API cleanups, and a log message tweak"

* tag 'efi-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/efi: Log 32/64-bit mismatch with kernel as an error
  efi/dev-path-parser: Switch to use for_each_acpi_dev_match()
  efi/apple-properties: Handle device properties with software node API

Pull x86 SEV updates from Borislav Petkov:

 - Differentiate the type of exception the #VC handler raises depending
   on code executed in the guest and handle the case where failure to
   get the RIP would result in a #GP, as it should, instead of in a #PF

 - Disable interrupts while the per-CPU GHCB is held

 - Split the #VC handler depending on where the #VC exception has
   happened and therefore provide for precise context tracking like the
   rest of the exception handlers deal with noinstr regions now

 - Add defines for the GHCB version 2 protocol so that further shared
   development with KVM can happen without merge conflicts

 - The usual small cleanups

* tag 'x86_sev_for_v5.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sev: Use "SEV: " prefix for messages from sev.c
  x86/sev: Add defines for GHCB version 2 MSR protocol requests
  x86/sev: Split up runtime #VC handler for correct state tracking
  x86/sev: Make sure IRQs are disabled while GHCB is active
  x86/sev: Propagate #GP if getting linear instruction address failed
  x86/insn: Extend error reporting from insn_fetch_from_user[_inatomic]()
  x86/insn-eval: Make 0 a valid RIP for insn_get_effective_ip()
  x86/sev: Fix error message in runtime #VC handler

Pull x86 cpu updates from Borislav Petkov:

 - New AMD models support

 - Allow MONITOR/MWAIT to be used for C1 state entry on Hygon too

 - Use the special RAPL CPUID bit to detect the functionality on AMD and
   Hygon instead of doing family matching.

 - Add support for new Intel microcode deprecating TSX on some models
   and do not enable kernel workarounds for those CPUs when TSX
   transactions always abort, as a result of that microcode update.

* tag 'x86_cpu_for_v5.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsx: Clear CPUID bits when TSX always force aborts
  x86/events/intel: Do not deploy TSX force abort workaround when TSX is deprecated
  x86/msr: Define new bits in TSX_FORCE_ABORT MSR
  perf/x86/rapl: Use CPUID bit on AMD and Hygon parts
  x86/cstate: Allow ACPI C1 FFH MWAIT use on Hygon systems
  x86/amd_nb: Add AMD family 19h model 50h PCI ids
  x86/cpu: Fix core name for Sapphire Rapids

Pull x86 RAS updates from Borislav Petkov:

 - Add the required information to the faked APEI-reported mem error so
   that the kernel properly attempts to offline the corresponding page,
   as it does for kernel-detected correctable errors.

 - Fix a typo in AMD's error descriptions.

* tag 'ras_core_for_v5.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  EDAC/mce_amd: Fix typo "FIfo" -> "Fifo"
  x86/mce: Include a MCi_MISC value in faked mce logs
  x86/MCE/AMD, EDAC/mce_amd: Add new SMCA bank types

Pull hwmon updates from Guenter Roeck:
 "New drivers:

   - Delta DPS920AB

   - Flex PIM4006, PIM4328 and PIM4820

   - MPS MP2888

   - Sensirion SHT4X

  Added chip support to existing drivers:

   - Flex BMR310, BMR456, BMR457, BMR458, BMR480, BMR490, BMR491, and
     BMR492

   - TI TMP1075

   - Renesas ZLS1003, ZLS4009 and ZL8802

  Other:

   - Dropped explicit ACPI support for MAX31722 and LM70; the APIC IDs
     in those drivers do not exist.

   - Support set_trips() callback into thermal subsystem

   - Minor fixes and improvements in various drivers"

* tag 'hwmon-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (49 commits)
  hwmon: Support set_trips() of thermal device ops
  hwmon: (lm90) Prevent integer underflows of temperature calculations
  hwmon: (lm90) Disable interrupt on suspend
  hwmon: (lm90) Unmask hardware interrupt
  hwmon: (lm90) Use hwmon_notify_event()
  hwmon: (lm90) Don't override interrupt trigger type
  hwmon: (pmbus/dps920ab) Delete some dead code
  hwmon: (ntc_thermistor) Drop unused headers.
  MAINTAINERS: Add Delta DPS920AB PSU driver
  dt-bindings: trivial-devices: Add Delta DPS920AB
  hwmon: (pmbus) Add driver for Delta DPS-920AB PSU
  hwmon: (pmbus/pim4328) Add documentation for the pim4328 PMBus driver
  hwmon: (pmbus/pim4328) Add PMBus driver for PIM4006, PIM4328 and PIM4820
  hwmon: (pmbus) Allow phase function even if it's not on page
  hwmon: (pmbus) Add support for reading direct mode coefficients
  hwmon: (pmbus) Add new pmbus flag NO_WRITE_PROTECT
  docs: hwmon: adm1177.rst: avoid using ReSt :doc:`foo` markup
  hwmon: (pmbus_core) Check adapter PEC support
  hwmon: (ina3221) use CVRF only for single-shot conversion
  hwmon: (max31790) Detect and report zero fan speed
  ...

Pull spi updates from Mark Brown:
 "The biggest single thing in the diffstat here is a massive overhaul of
  the PXA2xx driver from Andy Shevchenko (the IP is still in use on
  modern Intel systems), though we also have quite a lot of core work as
  well:

   - Better support for mixing native and GPIO chip selects also from
     Andy.

   - Support for devices with multiple chip selects from Sebastian
     Reichel.

   - Helper for polling status registers in spi-mem from Patrice
     Chotard.

   - Support for Renesas RZ/N1 and Rockchip RV1126"

* tag 'spi-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (86 commits)
  spi: core: add dma_map_dev for dma device
  spi: convert Xilinx Zynq UltraScale+ MPSoC GQSPI bindings to YAML
  spi: Fix self assignment issue with ancillary->mode
  spi: spi-sh-msiof: : use proper DMAENGINE API for termination
  spi: spi-rspi: : use proper DMAENGINE API for termination
  spi: spi-rockchip: add description for rv1126
  spi: rockchip: Support SPI_CS_HIGH
  spi: rockchip: Support cs-gpio
  spi: rockchip: Wait for STB status in slave mode tx_xfer
  spi: rockchip: Set rx_fifo interrupt waterline base on transfer item
  spi: rockchip: add compatible string for rv1126
  spi: spi-sun6i: Fix chipselect/clock bug
  spi: dt-bindings: support devices with multiple chipselects
  spi: add ancillary device support
  spi: xilinx: convert to yaml
  spi: convert Cadence SPI bindings to YAML
  spi: stm32-qspi: Remove unused qspi field of struct stm32_qspi_flash
  spi: add of_device_uevent_modalias support
  spi: meson-spicc: fix memory leak in meson_spicc_probe
  spi: meson-spicc: fix a wrong goto jump for avoiding memory leak.
  ...

Pull regulator updates from Mark Brown:
 "The main core change this release is generic support for handling of
  hardware errors from Matti Vaittinen, including some small updates to
  the reboot and thermal code so we can share support for powering off
  the system if things are going wrong enough.

  Otherwise this release we've mainly seen the addition of new drivers,
  including MT6359 which has pulled in some small changes from the MFD
  tree for build dependencies.

   - Support for controlling the trigger points for hardware error
     detection, and shared handlers for this.

   - Support for Maxim MAX8993, Mediatek MT6359 and MT6359P, Qualcomm
     PM8226 and SA8115P-ADP, and Sylergy TCS4526"

* tag 'regulator-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (91 commits)
  regulator: bd9576: Fix uninitializes variable may_have_irqs
  regulator: max8893: Select REGMAP_I2C to fix build error
  regulator: da9052: Ensure enough delay time for .set_voltage_time_sel
  regulator: mt6358: Fix vdram2 .vsel_mask
  regulator: hi6421v600: Fix setting wrong driver_data
  MAINTAINERS: Add reviewer for regulator irq_helpers
  regulator: bd9576: Fix the driver name in id table
  regulator: bd9576: Support error reporting
  regulator: bd9576 add FET ON-resistance for OCW
  regulator: add property parsing and callbacks to set protection limits
  regulator: IRQ based event/error notification helpers
  regulator: move rdev_print helpers to internal.h
  regulator: add warning flags
  thermal: Use generic HW-protection shutdown API
  reboot: Add hardware protection power-off
  regulator: Add protection limit properties
  regulator: hi6421v600: Fix setting idle mode
  regulator: Add MAX8893 bindings
  regulator: max8893: add regulator driver
  regulator: hi6421: Use correct variable type for regmap api val argument
  ...

Pull regmap updates from Mark Brown:
 "The big thing this release is support for accessing the register maps
  of MDIO devices via the framework. We've also added support for 7/17
  register formats on bytestream transports and inverted status
  registers in regmap-irq"

* tag 'regmap-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: mdio: Reject invalid addresses
  regmap: mdio: Fix regmap_bus pointer constness
  regmap: mdio: Add clause-45 support
  regmap: mdio: Clean up invalid clause-22 addresses
  regmap-irq: Introduce inverted status registers support
  regmap: add support for 7/17 register formating
  regmap: mdio: Don't modify output if error happened
  regmap: Add MDIO bus support
  regmap-i2c: Set regmap max raw r/w from quirks

Pull MMC and MEMSTICK updates from Ulf Hansson:
 "MMC core:
   - Add support for Cache Ctrl for SD cards
   - Add support for Power Off Notification for SD cards
   - Add support for read/write of the SD function extension registers
   - Allow broken eMMC HS400 mode to be disabled via DT
   - Allow UHS-I voltage switch for SDSC cards if supported
   - Disable command queueing in the ioctl path
   - Enable eMMC sleep commands to use HW busy polling to minimize delay
   - Extend re-use of the common polling loop to standardize behaviour
   - Take into account MMC_CAP_NEED_RSP_BUSY for eMMC HPI commands

  MMC host:
   - jz4740: Add support for the JZ4775 variant
   - sdhci-acpi: Disable write protect detection on Toshiba Encore 2 WT8-B
   - sdhci-esdhc-imx: Advertise HS400 support through MMC caps
   - sdhci-esdhc-imx: Enable support for system wakeup for SDIO
   - sdhci-iproc: Add support for the legacy sdhci controller on the BCM7211
   - vub3000: Fix control-request direction

  MEMSTICK:
   - A couple of fixes/cleanups"

* tag 'mmc-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (54 commits)
  mmc: sdhci-iproc: Add support for the legacy sdhci controller on the BCM7211
  dt-bindings: mmc: sdhci-iproc: Add brcm,bcm7211a0-sdhci
  mmc: JZ4740: Add support for JZ4775
  dt-bindings: mmc: JZ4740: Add bindings for JZ4775
  mmc: sdhci-esdhc-imx: Enable support for system wakeup for SDIO
  mmc: Improve function name when aborting a tuning cmd
  mmc: sdhci-of-aspeed: Turn down a phase correction warning
  mmc: debugfs: add description for module parameter
  mmc: via-sdmmc: add a check against NULL pointer dereference
  mmc: sdhci-sprd: use sdhci_sprd_writew
  mmc: sdhci-esdhc-imx: remove unused is_imx6q_usdhc
  mmc: core: Allow UHS-I voltage switch for SDSC cards if supported
  mmc: mmc_spi: Imply container_of() to be no-op
  mmc: mmc_spi: Drop duplicate 'mmc_spi' in the debug messages
  mmc: dw_mmc-pltfm: Remove unused <linux/clk.h>
  mmc: sdhci-of-aspeed: Configure the SDHCIs as specified by the devicetree.
  mmc: core: Add a missing SPDX license header
  mmc: vub3000: fix control-request direction
  mmc: sdhci-omap: Use pm_runtime_resume_and_get() to replace open coding
  mmc: sdhci_am654: Use pm_runtime_resume_and_get() to replace open coding
  ...

Pull libata updates from Jens Axboe:
 "The big change in this round is that we're finally in a position where
  we can sanely remove the old drivers/ide/ code, as libata covers
  everything we need by now.

  This is exciting for two reasons:

   1) we delete a lot of legacy code that doesn't really meet the
      standards we have today, and

   2) it enables us to clean up various bits in the block layer that
      exist only because of the old IDE code.

  Outside of that, just a few minor fixes here, fixups for warnings,
  etc"

* tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block: (29 commits)
  ata: rb532_cf: remove redundant codes
  ide: remove the legacy ide driver
  m68k: use libata instead of the legacy ide driver
  ARM: disable CONFIG_IDE in pxa_defconfig
  ARM: disable CONFIG_IDE in footbridge_defconfig
  alpha: use libata instead of the legacy ide driver
  pata_cypress: add a module option to disable BM-DMA
  ata: pata_macio: Avoid overwriting initialised field in 'pata_macio_sht'
  ata: pata_serverworks: Avoid overwriting initialised field in 'serverworks_osb4_sht
  ata: pata_sc1200: sc1200_sht'Avoid overwriting initialised field in '
  ata: pata_cs5530: Avoid overwriting initialised field in 'cs5530_sht'
  ata: pata_cs5520: Avoid overwriting initialised field in 'cs5520_sht'
  ata: pata_atiixp: Avoid overwriting initialised field in 'atiixp_sht'
  ata: sata_nv: Do not over-write initialise fields in 'nv_adma_sht' and 'nv_swncq_sht'
  ata: sata_mv: Do not over-write initialise fields in 'mv6_sht'
  ata: sata_sil24: Do not over-write initialise fields in 'sil24_sht'
  ata: ahci: Ensure initialised fields are not overwritten in AHCI_SHT()
  ata: include: libata: Move fields commonly over-written to separate MACRO
  ahci: Add support for Dell S140 and later controllers
  ata: ahci_sunxi: Disable DIPM
  ...

Dave Jones reported the following

	This made it into 5.13 final, and completely breaks NFSD for me
	(Serving tcp v3 mounts).  Existing mounts on clients hang, as do
	new mounts from new clients.  Rebooting the server back to rc7
	everything recovers.

The commit b3b64ebd ("mm/page_alloc: do bulk array bounds check after
checking populated elements") returns the wrong value if the array is
already populated which is interpreted as an allocation failure. Dave
reported this fixes his problem and it also passed a test running dbench
over NFS.

Fixes: b3b64ebd

 ("mm/page_alloc: do bulk array bounds check after checking populated elements")
Reported-and-tested-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [5.13+]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commits 4bad58eb (and
399f8dd9, which tried to fix it).

I do not believe these are correct, and I'm about to release 5.13, so am
reverting them out of an abundance of caution.

The locking is odd, and appears broken.

On the allocation side (in __sigqueue_alloc()), the locking is somewhat
straightforward: it depends on sighand->siglock.  Since one caller
doesn't hold that lock, it further then tests 'sigqueue_flags' to avoid
the case with no locks held.

On the freeing side (in sigqueue_cache_or_free()), there is no locking
at all, and the logic instead depends on 'current' being a single
thread, and not able to race with itself.

To make things more exciting, there's also the data race between freeing
a signal and allocating one, which is handled by using WRITE_ONCE() and
READ_ONCE(), and being mutually exclusive wrt the initial state (ie
freeing will only free if the old state was NULL, while allocating will
obviously only use the value if it was non-NULL, so only one or the
other will actually act on the value).

However, while the free->alloc paths do seem mutually exclusive thanks
to just the data value dependency, it's not clear what the memory
ordering constraints are on it.  Could writes from the previous
allocation possibly be delayed and seen by the new allocation later,
causing logical inconsistencies?

So it's all very exciting and unusual.

And in particular, it seems that the freeing side is incorrect in
depending on "current" being single-threaded.  Yes, 'current' is a
single thread, but in the presense of asynchronous events even a single
thread can have data races.

And such asynchronous events can and do happen, with interrupts causing
signals to be flushed and thus free'd (for example - sending a
SIGCONT/SIGSTOP can happen from interrupt context, and can flush
previously queued process control signals).

So regardless of all the other questions about the memory ordering and
locking for this new cached allocation, the sigqueue_cache_or_free()
assumptions seem to be fundamentally incorrect.

It may be that people will show me the errors of my ways, and tell me
why this is all safe after all.  We can reinstate it if so.  But my
current belief is that the WRITE_ONCE() that sets the cached entry needs
to be a smp_store_release(), and the READ_ONCE() that finds a cached
entry needs to be a smp_load_acquire() to handle memory ordering
correctly.

And the sequence in sigqueue_cache_or_free() would need to either use a
lock or at least be interrupt-safe some way (perhaps by using something
like the percpu 'cmpxchg': it doesn't need to be SMP-safe, but like the
percpu operations it needs to be interrupt-safe).

Fixes: 399f8dd9 ("signal: Prevent sigqueue caching after task got released")
Fixes: 4bad58eb

 ("signal: Allow tasks to cache one sigqueue struct")
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull s390 fixes from Vasily Gorbik:

 - Fix a couple of late pt_regs flags handling findings of conversion to
   generic entry.

 - Fix potential register clobbering in stack switch helper.

 - Fix thread/group masks for offline cpus.

 - Fix cleanup of mdev resources when remove callback is invoked in
   vfio-ap code.

* tag 's390-5.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/stack: fix possible register corruption with stack switch helper
  s390/topology: clear thread/group maps for offline cpus
  s390/vfio-ap: clean up mdev resources when remove callback invoked
  s390: clear pt_regs::flags on irq entry
  s390: fix system call restart with multiple signals

Pull pin control fixes from Linus Walleij:
 "Two last-minute fixes:

   - Put an fwnode in the errorpath in the SGPIO driver

   - Fix the number of GPIO lines per bank in the STM32 driver"

* tag 'pinctrl-v5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: stm32: fix the reported number of GPIO lines per bank
  pinctrl: microchip-sgpio: Put fwnode in error case during ->probe()

Pull SCSI fixes from James Bottomley:
 "Two small fixes, both in upper layer drivers (scsi disk and cdrom).

  The sd one is fixing a commit changing revalidation that came from the
  block tree a while ago (5.10) and the sr one adds handling of a
  condition we didn't previously handle for manually removed media"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: Call sd_revalidate_disk() for ioctl(BLKRRPART)
  scsi: sr: Return appropriate error code when disk is ejected

Merge misc fixes from Andrew Morton:
 "24 patches, based on 4a09d388.

  Subsystems affected by this patch series: mm (thp, vmalloc, hugetlb,
  memory-failure, and pagealloc), nilfs2, kthread, MAINTAINERS, and
  mailmap"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (24 commits)
  mailmap: add Marek's other e-mail address and identity without diacritics
  MAINTAINERS: fix Marek's identity again
  mm/page_alloc: do bulk array bounds check after checking populated elements
  mm/page_alloc: __alloc_pages_bulk(): do bounds check before accessing array
  mm/hwpoison: do not lock page again when me_huge_page() successfully recovers
  mm,hwpoison: return -EHWPOISON to denote that the page has already been poisoned
  mm/memory-failure: use a mutex to avoid memory_failure() races
  mm, futex: fix shared futex pgoff on shmem huge page
  kthread: prevent deadlock when kthread_mod_delayed_work() races with kthread_cancel_delayed_work_sync()
  kthread_worker: split code for canceling the delayed work timer
  mm/vmalloc: unbreak kasan vmalloc support
  KVM: s390: prepare for hugepage vmalloc
  mm/vmalloc: add vmalloc_no_huge
  nilfs2: fix memory leak in nilfs_sysfs_delete_device_group
  mm/thp: another PVMW_SYNC fix in page_vma_mapped_walk()
  mm/thp: fix page_vma_mapped_walk() if THP mapped by ptes
  mm: page_vma_mapped_walk(): get vma_address_end() earlier
  mm: page_vma_mapped_walk(): use goto instead of while (1)
  mm: page_vma_mapped_walk(): add a level of indentation
  mm: page_vma_mapped_walk(): crossing page table boundary
  ...

This ioctl request reads from uffdio_continue structure written by
userspace which justifies _IOC_WRITE flag.  It also writes back to that
structure which justifies _IOC_READ flag.

See NOTEs in include/uapi/asm-generic/ioctl.h for more information.

Fixes: f6191471

 ("userfaultfd: add UFFDIO_CONTINUE ioctl")
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull i2c fixes from Wolfram Sang:
 "Three more driver bugfixes and an annotation fix for the core"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: robotfuzz-osif: fix control-request directions
  i2c: dev: Add __user annotation
  i2c: cp2615: check for allocation failure in cp2615_i2c_recv()
  i2c: i801: Ensure that SMBHSTSTS_INUSE_STS is cleared when leaving i801_access

Pull device properties framework fix from Rafael Wysocki:
 "Fix a NULL pointer dereference introduced by a recent commit and
  occurring when device_remove_software_node() is used with a device
  that has never been registered (Heikki Krogerus)"

* tag 'devprop-5.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  software node: Handle software node injection to an existing device properly

Pull xen fix from Juergen Gross:
 "A fix for a regression introduced in 5.12: when migrating an irq
  related to a Xen user event to another cpu, a race might result
  in a WARN() triggering"

* tag 'for-linus-5.13b-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/events: reset active flag for lateeoi events later

Pull kvm fixes from Paolo Bonzini:
 "A selftests fix for ARM, and the fix for page reference count
  underflow. This is a very small fix that was provided by Nick Piggin
  and tested by myself"

* tag 'for-linus-urgent' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: do not allow mapping valid but non-reference-counted pages
  KVM: selftests: Fix mapping length truncation in m{,un}map()

Pull x86 fixes from Borislav Petkov:
 "Two more urgent FPU fixes:

   - prevent unprivileged userspace from reinitializing supervisor
     states

   - prepare init_fpstate, which is the buffer used when initializing
     FPU state, properly in case the skip-writing-state-components
     XSAVE* variants are used"

* tag 'x86_urgent_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Make init_fpstate correct with optimized XSAVE
  x86/fpu: Preserve supervisor states in sanitize_restored_user_xstate()

Pull ceph fixes from Ilya Dryomov:
 "Two regression fixes from the merge window: one in the auth code
  affecting old clusters and one in the filesystem for proper
  propagation of MDS request errors.

  Also included a locking fix for async creates, marked for stable"

* tag 'ceph-for-5.13-rc8' of https://github.com/ceph/ceph-client:
  libceph: set global_id as soon as we get an auth ticket
  libceph: don't pass result into ac->ops->handle_reply()
  ceph: fix error handling in ceph_atomic_open and ceph_lookup
  ceph: must hold snap_rwsem when filling inode for async create

Pull netfs fixes from David Howells:
 "This contains patches to fix netfs_write_begin() and afs_write_end()
  in the following ways:

  (1) In netfs_write_begin(), extract the decision about whether to skip
      a page out to its own helper and have that clear around the region
      to be written, but not clear that region. This requires the
      filesystem to patch it up afterwards if the hole doesn't get
      completely filled.

  (2) Use offset_in_thp() in (1) rather than manually calculating the
      offset into the page.

  (3) Due to (1), afs_write_end() now needs to handle short data write
      into the page by generic_perform_write(). I've adopted an
      analogous approach to ceph of just returning 0 in this case and
      letting the caller go round again.

  It also adds a note that (in the future) the len parameter may extend
  beyond the page allocated. This is because the page allocation is
  deferred to write_begin() and that gets to decide what size of THP to
  allocate."

Jeff Layton points out:
 "The netfs fix in particular fixes a data corruption bug in cephfs"

* tag 'netfs-fixes-20210621' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  netfs: fix test for whether we can skip read when writing beyond EOF
  afs: Fix afs_write_end() to handle short writes