Inside intel_engine_is_idle(), we flush the tasklet to ensure that is
being run in a timely fashion (ksoftirqd has taught us to expect the
worst). However, if we are in the middle of reset, the HW may not yet be
ready to execute the submission tasklet and so we must respect the
disable flag.

Fixes: dd0cf235 ("drm/i915: Speed up idle detection by kicking the tasklets")
Testcase: igt/drv_selftest/live_hangcheck
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180713203529.1973-2-chris@chris-wilson.co.uk

Knowing the boundary of each subtest can be instrumental in digesting
the voluminous trace output and finding the critical piece of
information.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180713203529.1973-1-chris@chris-wilson.co.uk

Hopefully the final hack to get guc fault-injection happy before we can
clean it up again, starting from a known good baseline...

[  383.017530] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0
[  383.017556] Oops: 0000 [#1] PREEMPT SMP PTI
[  383.017566] CPU: 7 PID: 4725 Comm: drv_module_relo Tainted: G     U            4.18.0-rc4-CI-CI_DRM_4485+ #1
[  383.017581] Hardware name: Micro-Star International Co., Ltd. MS-7B54/Z370M MORTAR (MS-7B54), BIOS 1.10 12/28/2017
[  383.017664] RIP: 0010:guc_stage_desc_pool_destroy+0x17/0xe0 [i915]
[  383.017674] Code: 59 a0 c6 05 02 59 18 00 01 e8 5e 01 c3 e0 eb b1 0f 1f 00 53 48 89 fb 48 81 c7 90 02 00 00 e8 60 64 45 e1 48 8b 83 80 02 00 00 <48> 8b 80 a0 00 00 00 48 8b 90 68 02 00 00 48 83 ea 01 48 81 fa ff
[  383.017771] RSP: 0018:ffffc900004bbdd0 EFLAGS: 00010282
[  383.017782] RAX: 0000000000000000 RBX: ffff88012ff41300 RCX: 0000000000000000
[  383.017794] RDX: 0000000000000000 RSI: ffffc900004bbd80 RDI: 0000000000000000
[  383.017805] RBP: ffff88012ff40000 R08: 00000000d876ee11 R09: 0000000000000000
[  383.017817] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88012ff47770
[  383.017828] R13: ffff88012ff40068 R14: ffff880264392ef8 R15: ffffffffa0639950
[  383.017840] FS:  00007fb9c18c8980(0000) GS:ffff8802663c0000(0000) knlGS:0000000000000000
[  383.017853] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  383.017864] CR2: 00000000000000a0 CR3: 00000001df6cc003 CR4: 00000000003606e0
[  383.017875] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  383.017887] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  383.017898] Call Trace:
[  383.017962]  intel_uc_fini+0x34/0xd0 [i915]
[  383.018020]  i915_gem_fini+0x5c/0x100 [i915]
[  383.018093]  i915_driver_unload+0xd2/0x110 [i915]
[  383.018150]  i915_pci_remove+0x10/0x20 [i915]
[  383.018165]  pci_device_remove+0x36/0xb0
[  383.018179]  device_release_driver_internal+0x185/0x250
[  383.018193]  driver_detach+0x35/0x70
[  383.018205]  bus_remove_driver+0x53/0xd0
[  383.018217]  pci_unregister_driver+0x25/0xa0
[  383.018232]  __se_sys_delete_module+0x162/0x210
[  383.018245]  ? do_syscall_64+0xd/0x190
[  383.018257]  do_syscall_64+0x55/0x190
[  383.018270]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  383.018282] RIP: 0033:0x7fb9c0f7c1b7
[  383.018290] Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48
[  383.018408] RSP: 002b:00007fffa01c2aa8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[  383.018425] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fb9c0f7c1b7
[  383.018440] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000560b96856d48
[  383.018454] RBP: 0000560b96856ce0 R08: 0000560b96856d4c R09: 00007fffa01c2ae8
[  383.018468] R10: 00007fffa01c1aa4 R11: 0000000000000206 R12: 0000560b954f7470

Testcase: igt/drv_module_reload/basic-reload-inject
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180713172658.14070-1-chris@chris-wilson.co.uk

We're printing out which pins got a hotplug, so why not also print
out which pins detected the long pulse as opposed to a short pulse.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705164357.28512-9-ville.syrjala@linux.intel.com


Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

We're doing a pointless translation from hpd_pin to port simply for
passing the thing to long_pulse_detect(). Let's pass the hpd_pin
directly instead.

This removes the assumption that the hpd_pin and port always
match. The only other place where we make that assumption anymore
is intel_hpd_pin_default() and that's fine as it's what determines
the relationship between the two. If we ever get hardware where
the hpd pins are wired in more interesting ways it should be
trivial to handle from now on.

This should also fix the IS_CNL_WITH_PORT_F() case as that mapped
pin E back to port F and passed that to
spt_port_hotplug2_long_detect() which would always return false
for port F. Now that we pass in pin E directly it'll actually
do the right thing.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: cf53902f ("drm/i915/cnl: Add HPD support for Port F.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705164357.28512-7-ville.syrjala@linux.intel.com


Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Use the enum hpd_pin type when talking about HPD pins, and rename the
variable from a very nondescript 'i' to 'pin', a name we already
use in other parts of the code.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705164357.28512-6-ville.syrjala@linux.intel.com


Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Instead of looping over ports and hpd_pins, let's loop over
the encoders when doing hotplug processing. And instead of
depending on dev_priv->irq_port[] to tell us whether the
encoder has the ->hpd_pulse() hook or not, we can just
check for that directly. So we can just nuke irq_port[] entirely.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705164357.28512-5-ville.syrjala@linux.intel.com


Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Rather than looping over all the ports and picking the encoder based on
the port, let's just loop over all the encoders instead. Gets rid of
some irq_port[] usage, which is a bit of an eye sore.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705164357.28512-4-ville.syrjala@linux.intel.com


Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Add intel_encoder_is_dig_port() to match intel_encoder_is_dp().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705164357.28512-3-ville.syrjala@linux.intel.com


Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Add a convenience macro for iterating DP encoders.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705164357.28512-2-ville.syrjala@linux.intel.com


Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

On gen8 and onwards, we can mark GPU accesses through the ppGTT as being
read-only, that is cause any GPU write onto that page to be discarded
(not triggering a fault). This is all that we need to finally support
the read-only flag for userptr!

v2: Check default address space for read only support as a proxy for the
user context/ppgtt.

Testcase: igt/gem_userptr_blits/readonly*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712191430.9269-1-chris@chris-wilson.co.uk

If the user created a read-only object, they should not be allowed to
circumvent the write protection using the pwrite ioctl.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712185315.3288-5-chris@chris-wilson.co.uk

If the user has created a read-only object, they should not be allowed
to circumvent the write protection by using a GGTT mmapping. Deny it.

Also most machines do not support read-only GGTT PTEs, so again we have
to reject attempted writes. Fortunately, this is known a priori, so we
can at least reject in the call to create the mmap (with a sanity check
in the fault handler).

v2: Check the vma->vm_flags during mmap() to allow readonly access.
v3: Remove VM_MAYWRITE to curtail mprotect()

Testcase: igt/gem_userptr_blits/readonly_mmap*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> #v1
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712185315.3288-4-chris@chris-wilson.co.uk

GVT is not propagating the PTE bits, and is always setting the
read-write bit, thus breaking read-only support.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712185315.3288-3-chris@chris-wilson.co.uk

Hook up the flags to allow read-only ppGTT mappings for gen8+

v2: Include a selftest to check that writes to a readonly PTE are
dropped
v3: Don't duplicate cpu_check() as we can just reuse it, and even worse
don't wholesale copy the theory-of-operation comment from igt_ctx_exec
without changing it to explain the intention behind the new test!
v4: Joonas really likes magic mystery values

Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712185315.3288-2-chris@chris-wilson.co.uk

We can set a bit inside the ppGTT PTE to indicate a page is read-only;
writes from the GPU will be discarded. We can use this to protect pages
and in particular support read-only userptr mappings (necessary for
importing PROT_READ vma).

Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712185315.3288-1-chris@chris-wilson.co.uk

On GLK NUC platforms the HDMI retiming buffer needs additional disabled
time to correctly sync to a faster incoming signal.

When measured on a scope the highspeed lines of the HDMI clock turn off
 for ~400uS during a normal resolution change. The HDMI retimer on the
 GLK NUC appears to require at least a full frame of quiet time before a
new faster clock can be correctly sync'd. Wait 100ms due to msleep
inaccuracies while waiting for a completed frame. Add a quirk to the
driver for GLK boards that use ITE66317 HDMI retimers.

V2: Add more devices to the quirk list
V3: Delay increased to 100ms, check to confirm crtc type is HDMI.
V4: crtc type check extended to include _DDI and whitespace fixes
v5: Fix white spaces, remove the macro for delay. Revert the crtc type
    check introduced in v4.

Cc: Imre Deak <imre.deak@intel.com>
Cc: <stable@vger.kernel.org> # v4.14+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105887


Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Tested-by: Daniel Scheller <d.scheller.oss@gmail.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710200205.1478-1-radhakrishna.sripada@intel.com

After aborting a module load, we may try and disable guc before we have
finished setting it. Long term plan is to ensure perfect onion unwind,
but in the short term we want to fix the oops to re-enable
drv_module_reload.

[  317.401239] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
[  317.401279] Oops: 0000 [#1] PREEMPT SMP PTI
[  317.401294] CPU: 5 PID: 4275 Comm: drv_module_relo Tainted: G     U            4.18.0-rc4-CI-CI_DRM_4476+ #1
[  317.401317] Hardware name: System manufacturer System Product Name/Z170M-PLUS, BIOS 3610 03/29/2018
[  317.401440] RIP: 0010:unreserve_doorbell+0x0/0x80 [i915]
[  317.401454] Code: bb e0 48 8b 35 21 4d 18 00 49 c7 c0 a8 e5 62 a0 b9 cc 00 00 00 48 c7 c2 d8 41 5f a0 48 c7 c7 c9 f6 53 a0 e8 a2 3d c2 e0 0f 0b <0f> b7 47 30 66 3d 00 01 74 20 48 8b 57 18 48 0f a3 82 40 05 00 00
[  317.401602] RSP: 0018:ffffc900003d3da0 EFLAGS: 00010246
[  317.401619] RAX: ffffffff8223b300 RBX: 0000000000000000 RCX: 0000000000000000
[  317.401636] RDX: 0000001fffffffc0 RSI: ffff880219f115f0 RDI: 0000000000000000
[  317.401654] RBP: ffff880219f11838 R08: 0000000000000000 R09: 0000000000000000
[  317.401671] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880219f11300
[  317.401689] R13: ffff880219f17770 R14: ffff88022c1daef8 R15: ffffffffa06ae950
[  317.401707] FS:  00007febf77a9980(0000) GS:ffff880236d40000(0000) knlGS:0000000000000000
[  317.401727] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  317.401743] CR2: 0000000000000030 CR3: 0000000222072003 CR4: 00000000003606e0
[  317.401761] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  317.401779] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  317.401796] Call Trace:
[  317.401894]  guc_client_free+0x9/0x130 [i915]
[  317.401993]  intel_guc_submission_fini+0x50/0x90 [i915]
[  317.402092]  intel_uc_fini+0x34/0xd0 [i915]
[  317.402179]  i915_gem_fini+0x5c/0x100 [i915]
[  317.402249]  i915_driver_unload+0xd2/0x110 [i915]
[  317.402321]  i915_pci_remove+0x10/0x20 [i915]
[  317.402341]  pci_device_remove+0x36/0xb0
[  317.402357]  device_release_driver_internal+0x185/0x250
[  317.402374]  driver_detach+0x35/0x70
[  317.402390]  bus_remove_driver+0x53/0xd0
[  317.402404]  pci_unregister_driver+0x25/0xa0
[  317.402423]  __se_sys_delete_module+0x162/0x210
[  317.402439]  ? do_syscall_64+0xd/0x190
[  317.402454]  do_syscall_64+0x55/0x190
[  317.402470]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  317.402485] RIP: 0033:0x7febf6e5d1b7
[  317.402496] Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48
[  317.402646] RSP: 002b:00007fffb5e72798 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[  317.402667] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007febf6e5d1b7
[  317.402686] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000562da1addd98
[  317.402703] RBP: 0000562da1addd30 R08: 0000562da1addd9c R09: 00007fffb5e727d8
[  317.402721] R10: 00007fffb5e71794 R11: 0000000000000206 R12: 0000562da0ff6470

Testcase: igt/drv_module_reload/basic-reload-inject
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712202027.19801-1-chris@chris-wilson.co.uk

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Reduce the module parameter to enable or disable.

The link stand by vs full link off was used only once.

And it was actually masking another bug fixed by commit
'84bb2916 ("drm/i915/psr: Check for SET_POWER_CAPABLE
bit at PSR init time.")'

So, let's remove these options for now. End goal is to
fully remove the mod param, moving it to a debugfs
interface in upcoming patches.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Tarun Vyas <tarun.vyas@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712052715.8177-1-rodrigo.vivi@intel.com

PSR is no longer supported on VLV/CHV so this is just dead code.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180711220050.21809-1-rodrigo.vivi@intel.com

This allows to read i915_edp_psr_status from tests without triggering
any AUX communication. Take this opportunity to move this under the
eDP-1 connector directory as the status we print is of the sink.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705003121.2478-1-dhinakaran.pandiyan@intel.com

In commit "drm/i915: Wait for PSR exit before checking for vblank
evasion", the idea was to limit the PSR IDLE checks when PSR is
actually supported. While CAN_PSR does do that check, it doesn't
applies on a per-crtc basis. crtc_state->has_psr is a more granular
check that only applies to pipe(s) that have PSR enabled.

Without the has_psr check, we end up waiting on the eDP transcoder's
PSR_STATUS register irrespective of whether the pipe being updated is
driving it or not.

v2: Remove unnecessary parantheses, make checkpatch happy.

v3: Move the has_psr check to intel_psr_wait_for_idle and commit
    message changes (DK).

v4: Derive dev_priv from intel_crtc_state (DK)

v5: Commit message changes to reflect the HW behavior (DK)

Fixes: a6089879 ("drm/i915: Wait for PSR exit before checking for vblank evasion")
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Tarun Vyas <tarun.vyas@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712053323.26266-1-tarun.vyas@intel.com

Support for Burst read in HW is added for HDCP2.2 compliance
requirement.

This patch enables the burst read for all the gmbus read of more than
511Bytes, on capable platforms.

v2:
  Extra line is removed.
v3:
  Macro is added for detecting the BURST_READ Support [Jani]
  Runtime detection of the need for burst_read [Jani]
  Calculation enhancement.
v4:
  GMBUS0 reg val is passed from caller [ville]
  Removed a extra var [ville]
  Extra brackets are removed [ville]
  Implemented the handling of 512Bytes Burst Read.
v5:
  Burst read max length is fixed at 767Bytes [Ville]
v6:
  Collecting the received reviewed-by.

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1530192889-5789-3-git-send-email-ramalingam.c@intel.com

GMBUS HW supports 511Bytes as Max Bytes per single RD/WR op. Instead of
enabling the 511Bytes per RD/WR cycle on legacy platforms for no
absolute ROIs, this change allows the max bytes per op upto 511Bytes
from Gen9 onwards.

v2:
  No Change.
v3:
  Inline function for max_xfer_size and renaming of the macro.[Jani]
v4:
  Extra brackets removed [ville]
  Commit msg is modified.
v5:
  Collecting the Reviewed-By received.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1530192889-5789-2-git-send-email-ramalingam.c@intel.com

Since:
0d4b78b3 ("drm/i915/guc: Assert we have the doorbell before setting it up")

We have asserts in GuC doorbell related functions, which is a good thing.
Unfortunately, we were using those to check whether GuC FW is refusing
to allocate invalid doorbell - which makes the test fail.
Well, it would make the test WARN, except we fumbled cleanup ordering
and eat the BUG_ON instead.
Let's keep the asserts and use the internal implementation in the test.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107186


Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712112013.3253-1-chris@chris-wilson.co.uk


Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Let's reorder things so that we can do onion teardown rather than double
goto.

References: b96f6ebf ("drm/i915: Correctly handle error path in i915_gem_init_hw")
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712124810.25241-1-michal.winiarski@intel.com

If we fail the module load, we may try and cleanup before we even
allocate the GuC clients. KISS in order to try and re-enable
drv_module_reload for BAT.

Testcase: igt/drv_module_reload/basic-reload-inject
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712105830.20390-1-chris@chris-wilson.co.uk

Along a module load error path, we may try to cleanup the powercontext
even before we have allocated it.  Reorganising GT powermanagement is an
 on going process, so for simplicity handle it.

[  522.733832] WARN_ON(!dev_priv->vlv_pctx)
[  522.733986] WARNING: CPU: 1 PID: 3856 at drivers/gpu/drm/i915/intel_pm.c:7350 intel_cleanup_gt_powersave+0x5f/0x70 [i915]
[  522.733991] Modules linked in: i915(+) vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic btusb btrtl btbcm btintel intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul bluetooth snd_hda_codec ghash_clmulni_intel snd_hwdep snd_hda_core ecdh_generic lpc_ich r8169 snd_pcm mii i2c_hid prime_numbers [last unloaded: i915]
[  522.734105] CPU: 1 PID: 3856 Comm: drv_module_relo Tainted: G     U            4.18.0-rc4-CI-CI_DRM_4474+ #1
[  522.734110] Hardware name: \xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff \xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff/DN2820FYK, BIOS FYBYT10H.86A.0059.2017.0607.2130 06/07/2017
[  522.734193] RIP: 0010:intel_cleanup_gt_powersave+0x5f/0x70 [i915]
[  522.734197] Code: 00 74 0d 48 c7 83 68 a6 00 00 00 00 00 00 eb c8 e8 36 6f 37 e1 eb ec 48 c7 c6 c5 7a 3d a0 48 c7 c7 b5 78 3d a0 e8 71 04 e0 e0 <0f> 0b eb aa 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f3 c3 0f 1f 40
[  522.734445] RSP: 0018:ffffc900004f3af0 EFLAGS: 00010282
[  522.734453] RAX: 0000000000000000 RBX: ffff880106360000 RCX: 0000000000000001
[  522.734458] RDX: 0000000080000001 RSI: ffffffff820c65c4 RDI: 00000000ffffffff
[  522.734463] RBP: ffff880106360000 R08: 000000009f79baee R09: 0000000000000000
[  522.734467] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88013b3133f8
[  522.734472] R13: 00000000ffffffed R14: ffff880106360d58 R15: ffff88013b3133f8
[  522.734477] FS:  00007f43f70af980(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000
[  522.734481] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  522.734486] CR2: 000055a13a787580 CR3: 00000001325e6000 CR4: 00000000001006e0
[  522.734490] Call Trace:
[  522.734595]  intel_modeset_cleanup+0xcf/0x140 [i915]
[  522.734682]  i915_driver_load+0xc85/0x10a0 [i915]
[  522.734694]  ? _raw_spin_unlock_irqrestore+0x4c/0x60
[  522.734703]  ? trace_hardirqs_on_caller+0xe0/0x1b0
[  522.734790]  i915_pci_probe+0x29/0x90 [i915]
[  522.734801]  pci_device_probe+0xa1/0x130
[  522.734813]  driver_probe_device+0x306/0x480
[  522.734824]  __driver_attach+0xdb/0x100
[  522.734830]  ? driver_probe_device+0x480/0x480
[  522.734836]  ? driver_probe_device+0x480/0x480
[  522.734844]  bus_for_each_dev+0x74/0xc0
[  522.734855]  bus_add_driver+0x15f/0x250
[  522.734863]  ? 0xffffffffa0793000
[  522.734870]  driver_register+0x56/0xe0
[  522.734877]  ? 0xffffffffa0793000
[  522.734883]  do_one_initcall+0x58/0x370
[  522.734893]  ? do_init_module+0x1d/0x1ea
[  522.734900]  ? rcu_read_lock_sched_held+0x6f/0x80
[  522.734906]  ? kmem_cache_alloc_trace+0x282/0x2e0
[  522.734918]  do_init_module+0x56/0x1ea
[  522.734927]  load_module+0x2435/0x2b20
[  522.734965]  ? __se_sys_finit_module+0xd3/0xf0
[  522.734972]  __se_sys_finit_module+0xd3/0xf0
[  522.734995]  do_syscall_64+0x55/0x190
[  522.735003]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  522.735009] RIP: 0033:0x7f43f675d839
[  522.735014] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
[  522.735260] RSP: 002b:00007ffe69384238 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[  522.735269] RAX: ffffffffffffffda RBX: 000056100e387090 RCX: 00007f43f675d839
[  522.735273] RDX: 0000000000000000 RSI: 000056100e37bff0 RDI: 0000000000000003
[  522.735278] RBP: 000056100e37bff0 R08: 0000000000000000 R09: 0000000000000000
[  522.735282] R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000
[  522.735286] R13: 000056100e37c890 R14: 0000000000000020 R15: 0000000000000027
[  522.735309] irq event stamp: 1389594
[  522.735316] hardirqs last  enabled at (1389593): [<ffffffff810f896c>] console_unlock+0x3fc/0x600
[  522.735323] hardirqs last disabled at (1389594): [<ffffffff81a0111c>] error_entry+0x7c/0x100
[  522.735329] softirqs last  enabled at (13893567): [<ffffffff81c0034f>] __do_softirq+0x34f/0x505
[  522.735336] softirqs last disabled at (1389335): [<ffffffff8108c7b9>] irq_exit+0xa9/0xc0
[  522.735432] WARNING: CPU: 1 PID: 3856 at drivers/gpu/drm/i915/intel_pm.c:7350 intel_cleanup_gt_powersave+0x5f/0x70 [i915]

Testcase: igt/drv_module_reload/basic-reload-inject
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712105454.16091-1-chris@chris-wilson.co.uk

Change it to use strlcpy instead

Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712074103.21571-1-chris@chris-wilson.co.uk


Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

gvt-next-2018-07-11

- vGPU huge page support (Changbin)
- BXT display irq warning fix (Colin)
- Handle GVT dependency well (Henry)

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180711023353.GU1267@zhen-hp.sh.intel.com

The kernel recently gained an augmented rbtree with the purpose of
cacheing the leftmost element of the rbtree, a frequent optimisation to
avoid calls to rb_first() which is also employed by the
execlists->queue. Switch from our open-coded cache to the library.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180629075348.27358-9-chris@chris-wilson.co.uk

Since live_workarounds poke around the w/a registers and checks to see
if they survive across a reset, we are prone to fouling the machine and
leaving it in a non-recoverable state. Wrap the probe inside a timeout
to abort the test if the reset fails.

v2: Include GEM_TRACE on declaring wedged.
v3: Add a few includes to make the header look standalone.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107188


Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180711122952.18448-1-chris@chris-wilson.co.uk

Add a mutex into struct i915_address_space to be used while operating on
the vma and their lists for a particular vm. As this may be called from
the shrinker, we taint the mutex with fs_reclaim so that from the start
lockdep warns us if we are caught holding the mutex across an
allocation. (With such small steps we will eventually rid ourselves of
struct_mutex recursion!)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180711073608.20286-2-chris@chris-wilson.co.uk

Now that our stolen memory is already reserved by the x86 subsystem
(since commit "x86/gpu: reserve ICL's graphics stolen memory"), make
use of it.

Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: x86@kernel.org
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180504203252.28048-2-paulo.r.zanoni@intel.com

ICL changes the registers and addresses to 64 bits.

I also briefly looked at implementing an u64 version of the PCI config
read functions, but I concluded this wouldn't be trivial, so it's not
worth doing it for a single user that can't have any racing problems
while reading the register in two separate operations.

v2:
 - Scrub the development (non-public) changelog (Joonas).
 - Remove the i915.ko bits so this can be easily backported in order
   to properly avoid stolen memory even on machines without i915.ko
   (Joonas).
 - CC stable for the reasons above.

Issue: VIZ-9250
CC: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Fixes: 41231001 ("drm/i915/icl: Add initial Icelake definitions.")
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180504203252.28048-1-paulo.r.zanoni@intel.com

Following intel_gvt_init() failure, we missed unwinding our setup
leaving pointers dangling past the module unload. For our example, the
pm_qos:

[  441.057615] top: 000000006b3baf1c, n: 0000000054d8ef33, p: 0000000097cdf1a2
               prev: 0000000054d8ef33, n: 0000000097cdf1a2, p: 000000006b3baf1c
               next: 0000000097cdf1a2, n: 000000006de8fc8b, p: 0000000081087253
[  441.057627] WARNING: CPU: 4 PID: 9277 at lib/plist.c:42 plist_check_prev_next+0x2d/0x40
[  441.057628] Modules linked in: i915(+) vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core e1000e snd_pcm mei_me mei prime_numbers [last unloaded: i915]
[  441.057652] CPU: 4 PID: 9277 Comm: drv_selftest Tainted: G     U            4.18.0-rc4-CI-CI_DRM_4464+ #1
[  441.057653] Hardware name: System manufacturer System Product Name/Z170 PRO GAMING, BIOS 3402 04/26/2017
[  441.057656] RIP: 0010:plist_check_prev_next+0x2d/0x40
[  441.057657] Code: 08 48 39 f0 74 2b 49 89 f0 48 8b 4f 08 50 ff 32 52 48 89 fe 41 ff 70 08 48 8b 17 48 c7 c7 d8 ae 14 82 4d 8b 08 e8 63 0e 76 ff <0f> 0b 48 83 c4 20 c3 48 39 10 75 d0 f3 c3 0f 1f 44 00 00 41 54 55
[  441.057717] RSP: 0018:ffffc900003a3a68 EFLAGS: 00010082
[  441.057720] RAX: 0000000000000000 RBX: ffff8802193978c0 RCX: 0000000000000002
[  441.057721] RDX: 0000000080000002 RSI: ffffffff820c65a4 RDI: 00000000ffffffff
[  441.057722] RBP: ffff8802193978c0 R08: 0000000000000000 R09: 0000000000000001
[  441.057724] R10: ffffc900003a3a70 R11: 0000000000000000 R12: ffffffff82243de0
[  441.057725] R13: ffffffff82243de0 R14: ffff88021a6c78c0 R15: 0000000077359400
[  441.057726] FS:  00007fc23a4a9980(0000) GS:ffff880236d00000(0000) knlGS:0000000000000000
[  441.057728] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  441.057729] CR2: 0000563e4503d038 CR3: 0000000138f86005 CR4: 00000000003606e0
[  441.057730] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  441.057731] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  441.057732] Call Trace:
[  441.057736]  plist_check_list+0x2e/0x40
[  441.057738]  plist_add+0x23/0x130
[  441.057743]  pm_qos_update_target+0x1bd/0x2f0
[  441.057771]  i915_driver_load+0xec4/0x1060 [i915]
[  441.057775]  ? trace_hardirqs_on_caller+0xe0/0x1b0
[  441.057800]  i915_pci_probe+0x29/0x90 [i915]
[  441.057804]  pci_device_probe+0xa1/0x130
[  441.057807]  driver_probe_device+0x306/0x480
[  441.057810]  __driver_attach+0xdb/0x100
[  441.057812]  ? driver_probe_device+0x480/0x480
[  441.057813]  ? driver_probe_device+0x480/0x480
[  441.057816]  bus_for_each_dev+0x74/0xc0
[  441.057819]  bus_add_driver+0x15f/0x250
[  441.057821]  ? 0xffffffffa0696000
[  441.057823]  driver_register+0x56/0xe0
[  441.057825]  ? 0xffffffffa0696000
[  441.057827]  do_one_initcall+0x58/0x370
[  441.057830]  ? do_init_module+0x1d/0x1ea
[  441.057832]  ? rcu_read_lock_sched_held+0x6f/0x80
[  441.057834]  ? kmem_cache_alloc_trace+0x282/0x2e0
[  441.057838]  do_init_module+0x56/0x1ea
[  441.057841]  load_module+0x2435/0x2b20
[  441.057852]  ? __se_sys_finit_module+0xd3/0xf0
[  441.057854]  __se_sys_finit_module+0xd3/0xf0
[  441.057861]  do_syscall_64+0x55/0x190
[  441.057863]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  441.057865] RIP: 0033:0x7fc239d75839
[  441.057866] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
[  441.057927] RSP: 002b:00007fffb7825d38 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[  441.057930] RAX: ffffffffffffffda RBX: 0000563e45035dd0 RCX: 00007fc239d75839
[  441.057931] RDX: 0000000000000000 RSI: 0000563e4502f8a0 RDI: 0000000000000004
[  441.057932] RBP: 0000563e4502f8a0 R08: 0000000000000004 R09: 0000000000000000
[  441.057933] R10: 00007fffb7825ea0 R11: 0000000000000246 R12: 0000000000000000
[  441.057934] R13: 0000563e4502f690 R14: 0000000000000000 R15: 000000000000003f
[  441.057940] irq event stamp: 231338
[  441.057943] hardirqs last  enabled at (231337): [<ffffffff8193e3fc>] _raw_spin_unlock_irqrestore+0x4c/0x60
[  441.057944] hardirqs last disabled at (231338): [<ffffffff8193e26d>] _raw_spin_lock_irqsave+0xd/0x50
[  441.057947] softirqs last  enabled at (231024): [<ffffffff81c0034f>] __do_softirq+0x34f/0x505
[  441.057949] softirqs last disabled at (231005): [<ffffffff8108c7b9>] irq_exit+0xa9/0xc0
[  441.057951] WARNING: CPU: 4 PID: 9277 at lib/plist.c:42 plist_check_prev_next+0x2d/0x40

v2: Add a load failure point to intel_gvt_init() so that we always
exercise this path in future.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107129


Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710143821.1889-1-chris@chris-wilson.co.uk

After handling a critical failure initialising GEM we need to unwind the
modesetting setup.

Testcase: igt/drv_module_reload/basic-reload-inject
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710094421.16223-2-chris@chris-wilson.co.uk


Reviewed-by: Matthew Auld <matthew.auld@intel.com>

On unwinding following a critical failure inside GEM init, we also need
to be sure to flush the workers before unloading the module.

Testcase: igt/drv_module_reload/basic-reload-inject
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710094421.16223-1-chris@chris-wilson.co.uk

In the next patch, we will make a fairly minor change to flush
outstanding resets before suspend. In order to keep churn to a minimum
in that functional patch, we fix up the comments and coding style now.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709130208.11730-7-chris@chris-wilson.co.uk