* mvebu/dt-4:
  ARM: mvebu: sort DT nodes by address
  ARM: orion5x: sort DT nodes by address
  ARM: dove: sort DT nodes by address
  ARM: kirkwood: sort dt nodes by address

Signed-off-by: Kevin Hilman <khilman@linaro.org>

Conflicts:
	arch/arm/boot/dts/armada-370-xp.dtsi

From Jason Cooper:
mvebu DT changes for v3.14 (incr. #3)

 - kirkwood
    - use symbolic names for gpios and key inputs

 - mvebu
    - add the pxa nand controller to the ReadyNAS and A370-RD boards

* tag 'mvebu-dt-3.14-3' of git://git.infradead.org/linux-mvebu

:
  ARM: mvebu: Enable NAND controller in A370 Reference Design board
  ARM: mvebu: Enable NAND controller in ReadyNAS 2120 .dts file
  ARM: mvebu: Enable NAND controller in ReadyNAS 104 .dts file
  ARM: mvebu: Enable NAND controller in ReadyNAS 102 .dts file
  ARM: DT: Kirkwood: Use symbolic names from gpio.h
  ARM: DT: Kirkwood: Use symbolic names from input.h

Signed-off-by: Kevin Hilman <khilman@linaro.org>

Merge tag 'nomadik-dt-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt

From Linus Walleij:
Some Nomadik Device Tree updates for the v3.14 cycle:

- Drop 0x prefixes

- Get rid of explicit GPIO management

* tag 'nomadik-dt-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: nomadik: get rid of explicit ethernet GPIO management
  ARM: nomadik: Remove '0x's from nomadik stn8815 DTS file

Prevent future unnecessary merge conflicts

Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Prevent future unnecessary merge conflicts

Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Prevent future (unnecessary) merge conflicts

Signed-off-by: Jason Cooper <jason@lakedaemon.net>

This has caused merge conflicts in the past.

Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Marvell's Armada 370 Reference Design has a NAND flash, so enable it in
the devicetree and add the partitions as prepared in the factory images.

In order to skip the driver's custom device detection and use only ONFI
detection, the "marvell,keep-config" parameter is used. This is needed
because we have no support for setting the timings parameters yet.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

This patch adds PWM nodes for each of the four channels present on the
pxa270.

Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'integrator-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt

From Linus Walleij:
Two integrator device tree patches for v3.14:

- Delete some static core module mappings.

- Move EBI location to the device tree.

* tag 'integrator-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator

:
  ARM: integrator: move EBI to the device tree
  ARM: integrator: delete static core module mappings

Signed-off-by: Kevin Hilman <khilman@linaro.org>

From Nicolas Ferre:
First DT pull-request for 3.14
- many little corrections and documentation updates
- LCD FB Device Tree for at91sam9263 and at91sam9g45 boards
- crypto peripherals DT entries + DMA specification
- new Cosino board

* tag 'at91-dt' of git://github.com/at91linux/linux-at91

: (21 commits)
  ARM: at91/at91rm9200ek.dts: rearrange nodes in address ascending order
  ARM: at91: dt: at91rm9200ek: add emac and nor flash support
  ARM: at91: add uart aliases to sama5d3 dtsi
  ARM: at91: add i2c2 pinctrl speficifation to sama5d3 DT
  ARM: at91: Animeo IP: fix mtd partition table
  ARM: at91: at91sam9g45: add i2c pinctrl
  ARM: at91: at91sam9g45: set default mmc pinctrl-names
  ARM: at91: sama5d3: enable qt1070 as a wakeup source
  ARM: at91: add support for Cosino board series by HCE Engineering
  ARM: at91/dt/sama5d3: add DMA information to SHA/AES/TDES nodes
  ARM: at91/dt/trivial: before sama5d3, Atmel MPU were using at91 prefix
  ARM: at91/dt/trivial: use macro for AES irq type
  ARM: at91: sam9263ek: add dt lcd support
  ARM: at91: at9sam9m10g45ek: add dt lcd support
  ARM: at91: sam9263: add fb dt support
  ARM: at91: sam9g45: add fb dt support
  ARM: at91/dt: binding: add missing compatibility string in SDRAM/DDR documentation
  ARM: at91/dt: binding: add precision to AIC documentation
  ARM: at91/dt: add atmel,pullup-gpio to at91rm9200ek usb1 definition
  ARM: at91/dt: add ethernet phy to at91rm9200ek board
  ...

Signed-off-by: Kevin Hilman <khilman@linaro.org>

Add .dts and .dtsi file to support sama5d36ek board.
Also update the the comments for sama5d36 in sama5d3.dtsi.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Boris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>

From Jason Cooper:
mvebu DT changes for v3.14 (set #2)

 - mvebu
    - Netgear ReadyNAS cleanup
    - add Netgear ReadyNAS 2120

 - kirkwood
    - Netgear ReadyNAS cleanup
    - add Netgear ReadyNAS NV+ v2

* tag 'mvebu-dt-3.14-2' of git://git.infradead.org/linux-mvebu

:
  ARM: kirkwood: Add support for NETGEAR ReadyNAS NV+ v2
  ARM: mvebu: Add Netgear ReadyNAS 2120 board
  ARM: mvebu: Fix whitespace in NETGEAR ReadyNAS .dts files
  ARM: mvebu: NETGEAR ReadyNAS 104 .dts cleanup
  ARM: mvebu: NETGEAR ReadyNAS 102 .dts cleanup
  ARM: kirkwood: NETGEAR ReadyNAS Duo v2 .dts cleanup

Signed-off-by: Kevin Hilman <khilman@linaro.org>

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris BREZILLON <b.brezillon@overkiz.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
[nicolas.ferre@atmel.com: remove one macb node too many]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by Boris BREZILLON <b.brezillon@overkiz.com>

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris BREZILLON <b.brezillon@overkiz.com>

Update to production one.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

pinctrl-names property was missing from mmc nodes.

Cc: <stable@vger.kernel.org> #3.11+
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Enable qt1070 keyboard as a wakeup source on sama5d3xek board.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

This patch adds the Cosino at91sam9g35 based CPU module and the
Cosino Mega 2560 extension board.

Web site: http://www.cosino.it



Signed-off-by: Rodolfo Giometti <giometti@linux.it>
[plagnioj@jcrosoft.com: added "at91-" to files, pinctrl fixed, removed unneeded stuff]
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
[nicolas.ferre@atmel.com: adapted to newer kernel, modified commit message]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Change the sha/aes/tdes compatibility string to match common
case for the at91sam9g45 family which is to keep the at91 prefix.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

The "atmel,at91rm9200-sdramc" was missing from binding documentation.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

In response to the "undocumented compatible strings" message, here is a
patch which is adding the precision of two "chips" that should be used for
the "atmel,<chip>-aic" compatibility string.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add ethernet phy node in at91rm9200ek.dts.
The reg register is not specified, as it may differ depending on the init
process of the board:
ADDR0/1 phy pins are connected to PA13/14 rm9200 pins. Which means the phy
will take its address from these pins during the reset process.

The macb driver will launch a full scan on the mdio bus to discover the phy
address.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
[nicolas.ferre@atmel.com: changed to IRQ_TYPE_EDGE_BOTH as asked by Boris]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Swap names as they were improperly defined.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Now that NAND controller support is available for Armada XP
(cb28e253: ARM: mvebu: Add support for NAND controller in
Armada 370/XP), this patch enables support for ReadyNAS 2120
and defines default partition layout as delivered by NETGEAR.

As described in similar commits 2be2bc39 (ARM: mvebu: Enable
NAND controller in Armada XP GP board) and d8c552dd (ARM:
mvebu: Enable NAND controller in Armada 370 Mirabox),
"marvell,keep-config" parameter is used as current support does
not allow for setting of timing parameters yet.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Now that NAND controller support is available for Armada 370
(cb28e253: ARM: mvebu: Add support for NAND controller in
Armada 370/XP), this patch enables support for ReadyNAS 104 and
defines default partition layout as delivered by NETGEAR.

As described in similar commits 2be2bc39 (ARM: mvebu: Enable
NAND controller in Armada XP GP board) and d8c552dd (ARM:
mvebu: Enable NAND controller in Armada 370 Mirabox),
"marvell,keep-config" parameter is used as current support does
not allow for setting of timing parameters yet.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Now that NAND controller support is available for Armada 370
(cb28e253: ARM: mvebu: Add support for NAND controller in
Armada 370/XP), this patch enables support for ReadyNAS 102 and
defines default partition layout as delivered by NETGEAR.

As described in similar commits 2be2bc39 (ARM: mvebu: Enable
NAND controller in Armada XP GP board) and d8c552dd (ARM:
mvebu: Enable NAND controller in Armada 370 Mirabox),
"marvell,keep-config" parameter is used as current support does
not allow for setting of timing parameters yet.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Use GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW instead of 0 and 1.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Replace the numeric key value with a symbolic name from
<bt-bindings/input/input.h>

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>