Use recently added fallback compatibility string in r8a7790 device tree.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

The ARM TWD interrupt is a private peripheral interrupt (PPI), and per
the ARM GIC documentation, whether the type for PPIs can be set is
IMPLEMENTATION DEFINED.

For R-Car H1 devices the PPI type cannot be set, and so when we attempt
to set the type for the ARM TWD interrupt it fails.  This has gone
unnoticed because it fails silently, and because we cannot re-configure
the type it has had no impact. Nevertheless fix the type for the TWD
interrupt so that it matches the hardware configuration.

Based on patches by Jon Hunter for Tegra20/30 and OMAP4.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

The ARM TWD interrupt is a private peripheral interrupt (PPI), and per
the ARM GIC documentation, whether the type for PPIs can be set is
IMPLEMENTATION DEFINED.

For SH-Mobile AG5 devices the PPI type cannot be set, and so when we
attempt to set the type for the ARM TWD interrupt it fails.  This has
gone unnoticed because it fails silently, and because we cannot
re-configure the type it has had no impact. Nevertheless fix the type
for the TWD interrupt so that it matches the hardware configuration.

Based on patches by Jon Hunter for Tegra20/30 and OMAP4.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add IIC nodes to r8a7794 device tree.

Based on similar work for the r8a7793 by Laurent Pinchart.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add IIC clocks to r8a7794 device tree.

Based on similar work for the r8a7790 by Wolfram Sang.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add CAN nodes to r8a7793 device tree.

Based on work by Sergei Shtylyov for the r8a7791 SoC.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

The R-Car CAN controllers can derive the CAN bus clock not only from their
peripheral clock input (clkp1) but also from the other internal clock
(clkp2) and external clock fed on CAN_CLK pin. Describe those clocks in
the device tree along with  the USB_EXTAL clock from which clkp2 is
derived.

Based on work by Sergei Shtylyov for the r8a7791 SoC.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add CAN nodes to r8a7794 device tree.

Based on work by Sergei Shtylyov for the r8a7791 SoC.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>

Add CAN nodes to r8a7794 device tree.
Based on work by Sergei Shtylyov for the r8a7791 SoC.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>

Use recently added fallback compatibility string in r8a7790 device tree.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

Use recently added fallback compatibility string in r8a7791 device tree.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Based on Rev. 2.00 of the R-Car Gen2 datasheet.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Use recently added fallback compatibility string in r8a7791 device tree.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

Use recently added fallback compatibility string in r8a7790 device trees.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583

 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

The clock-output-names property is left in place for the zb_clk which is
thus treated as a special case as the MSTP clock driver (clk-mstp.c)
explicitly looks for a clock with node name zb_clk for the r8a73a4 and
sh73a0 SoCs.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583

 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

The clock-output-names property is left in place for the zb_clk which is
thus treated as a special case as the MSTP clock driver (clk-mstp.c)
explicitly looks for a clock with node name zb_clk for the r8a73a4 and
sh73a0 SoCs.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583

 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583

 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583

 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583

 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583

 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583

 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583

 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583

 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583

 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583

 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583

 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583

 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.

Accordingly, remove the unnecessary clock-output-names properties and
as necessary the nodes.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

Since 16ccaf5b

 ("pinctrl: sh-pfc: Accept standard function, pins and
groups properties") renesas pfc drivers accept generic "function", "pins"
and "groups" properties.

This patch updates the kzm9d device tree to use the generic properties.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

Since 16ccaf5b

 ("pinctrl: sh-pfc: Accept standard function, pins and
groups properties") renesas pfc drivers accept generic "function", "pins"
and "groups" properties.

This patch updates the kzm9g device tree to use the generic properties.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

Since 16ccaf5b

 ("pinctrl: sh-pfc: Accept standard function, pins and
groups properties") renesas pfc drivers accept generic "function", "pins"
and "groups" properties.

This patch updates the silk device tree to use the generic properties.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

Since 16ccaf5b

 ("pinctrl: sh-pfc: Accept standard function, pins and
groups properties") renesas pfc drivers accept generic "function", "pins"
and "groups" properties.

This patch updates the alt device tree to use the generic properties.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

Since 16ccaf5b

 ("pinctrl: sh-pfc: Accept standard function, pins and
groups properties") renesas pfc drivers accept generic "function", "pins"
and "groups" properties.

This patch updates the gose device tree to use the generic

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

Since 16ccaf5b

 ("pinctrl: sh-pfc: Accept standard function, pins and
groups properties") renesas pfc drivers accept generic "function", "pins"
and "groups" properties.

This patch updates the porter device tree to use the generic properties.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

Since 16ccaf5b

 ("pinctrl: sh-pfc: Accept standard function, pins and
groups properties") renesas pfc drivers accept generic "function", "pins"
and "groups" properties.

This patch updates the koelsch device tree to use the generic properties.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

Since 16ccaf5b

 ("pinctrl: sh-pfc: Accept standard function, pins and
groups properties") renesas pfc drivers accept generic "function", "pins"
and "groups" properties.

This patch updates the marzen device tree to use the generic properties.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

Since 16ccaf5b

 ("pinctrl: sh-pfc: Accept standard function, pins and
groups properties") renesas pfc drivers accept generic "function", "pins"
and "groups" properties.

This patch updates the bockw device tree to use the generic properties.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

Since 16ccaf5b

 ("pinctrl: sh-pfc: Accept standard function, pins and
groups properties") renesas pfc drivers accept generic "function", "pins"
and "groups" properties.

This patch updates the armadillo800eva device tree to use the generic
properties.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

Since 16ccaf5b

 ("pinctrl: sh-pfc: Accept standard function, pins and
groups properties") renesas pfc drivers accept generic "function", "pins"
and "groups" properties.

This patch updates the ape6evm device tree to use the generic properties.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>