The function always returns zero (success). Ideally we'll remove it all
together - although that's requires a little more work.

For now, we can drop the return type and simplify the drm core code
surrounding it.

v2: remove redundant assignment (Sam)

Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200530124640.4176323-1-emil.l.velikov@gmail.com

When the current entry is rejected as candidate for the search
it does not mean that we can abort the subtree search.

It is perfectly possible that only the alignment, but not the
size is the reason for the rejection.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Link: https://patchwork.freedesktop.org/patch/369394/

Atm, a pending delayed destroy work during module removal will be
canceled, leaving behind MST ports, mstbs. Fix this by using a dedicated
workqueue which will be drained of requeued items as well when
destroying it.

v2:
- Check if wq is NULL before calling destroy_workqueue().

Cc: Lyude Paul <lyude@redhat.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200610134704.25270-1-imre.deak@intel.com

During the initial MST probing an MST port's I2C device will be
registered using the kdev of the DRM device as a parent. Later after MST
Connection Status Notifications this I2C device will be re-registered
with the kdev of the port's connector. This will also move
inconsistently the I2C device's sysfs entry from the DRM device's sysfs
dir to the connector's dir.

Fix the above by keeping the DRM kdev as the parent of the I2C device.

Ideally the connector's kdev would be used as a parent, similarly to
non-MST connectors, however that needs some more refactoring to ensure
the connector's kdev is already available early enough. So keep the
existing (initial) behavior for now.

Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200607212522.16935-2-imre.deak@intel.com

The WARN below triggers during the removal of an MST port. The problem
is that the parent device's (the connector's kdev) sysfs directory is
removed recursively when the connector is unregistered (even though the
I2C device holds a reference on the parent device). To fix this set
first the Peer Device Type to none which will remove the I2C device.

Note that atm, inconsistently, the parent of the I2C device is initially set to
the DRM kdev and after a Connection Status Notification the parent may be reset
to be the connector's kdev. This problem is addressed by the next patch.

[ 4462.989299] ------------[ cut here ]------------
[ 4463.014940] sysfs group 'power' not found for kobject 'i2c-24'
[ 4463.034664] WARNING: CPU: 0 PID: 970 at fs/sysfs/group.c:281 sysfs_remove_group+0x71/0x80
[ 4463.044357] Modules linked in: snd_hda_intel i915 drm_kms_helper(O) drm netconsole snd_hda_codec_hdmi mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul snd_intel_dspcf
g crc32_pclmul snd_hda_codec snd_hwdep ghash_clmulni_intel snd_hda_core asix usbnet kvm_intel mii i2c_algo_bit snd_pcm syscopyarea sysfillrect e1000e sysimgblt fb_sys_fops prim
e_numbers ptp pps_core i2c_i801 r8169 mei_me realtek mei [last unloaded: drm]
[ 4463.044399] CPU: 0 PID: 970 Comm: kworker/0:2 Tainted: G           O      5.7.0+ #172
[ 4463.044402] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP
[ 4463.044423] Workqueue: events drm_dp_delayed_destroy_work [drm_kms_helper]
[ 4463.044428] RIP: 0010:sysfs_remove_group+0x71/0x80
[ 4463.044431] Code: 48 89 df 5b 5d 41 5c e9 cd b6 ff ff 48 89 df e8 95 b4 ff ff eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 20 0f 3f 82 e8 9f c5 d7 ff <0f> 0b 5b 5d 41 5c c3 0f 1f
84 00 00 00 00 00 48 85 f6 74 31 41 54
[ 4463.044433] RSP: 0018:ffffc900018bfbf0 EFLAGS: 00010282
[ 4463.044436] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001
[ 4463.044439] RDX: 0000000080000001 RSI: ffff88849e828f38 RDI: 00000000ffffffff
[ 4463.052970] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:100:plane 2B] 00000000c2160caa state to 00000000d172564a
[ 4463.070533] RBP: ffffffff820cea20 R08: ffff88847f4b8958 R09: 0000000000000000
[ 4463.070535] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88848a725018
[ 4463.070537] R13: 0000000000000000 R14: ffffffff827090e0 R15: 0000000000000002
[ 4463.070539] FS:  0000000000000000(0000) GS:ffff88849e800000(0000) knlGS:0000000000000000
[ 4463.070541] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4463.070543] CR2: 00007fdf8a756538 CR3: 0000000489684001 CR4: 0000000000760ef0
[ 4463.070545] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4463.070547] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4463.070549] PKRU: 55555554
[ 4463.070551] Call Trace:
[ 4463.070560]  device_del+0x84/0x400
[ 4463.070571]  cdev_device_del+0x10/0x30
[ 4463.070578]  put_i2c_dev+0x69/0x80
[ 4463.070584]  i2cdev_detach_adapter+0x2e/0x60
[ 4463.070591]  notifier_call_chain+0x34/0x90
[ 4463.070599]  blocking_notifier_call_chain+0x3f/0x60
[ 4463.070606]  device_del+0x7c/0x400
[ 4463.087817]  ? lockdep_init_map_waits+0x57/0x210
[ 4463.087825]  device_unregister+0x11/0x60
[ 4463.087829]  i2c_del_adapter+0x249/0x310
[ 4463.087846]  drm_dp_port_set_pdt+0x6b/0x2c0 [drm_kms_helper]
[ 4463.087862]  drm_dp_delayed_destroy_work+0x2af/0x350 [drm_kms_helper]
[ 4463.087876]  process_one_work+0x268/0x600
[ 4463.105438]  ? __schedule+0x30c/0x920
[ 4463.105451]  worker_thread+0x37/0x380
[ 4463.105457]  ? process_one_work+0x600/0x600
[ 4463.105462]  kthread+0x140/0x160
[ 4463.105466]  ? kthread_park+0x80/0x80
[ 4463.105474]  ret_from_fork+0x24/0x50

Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200607212522.16935-1-imre.deak@intel.com

Some TypeC -> native DP adapters, at least the Club 3D CAC-1557 adapter,
incorrectly filter out HPD short pulses with a duration less than
~540 usec, leading to MST probe failures.

According to the DP Standard 2.0 section 5.1.4:
- DP sinks should generate short pulses in the 500 usec -> 1 msec range
- DP sources should detect short pulses in the 250 usec -> 2 msec range

According to the DP Alt Mode on TypeC Standard section 3.9.2, adapters
should detect and forward short pulses according to how sources should
detect them as specified in the DP Standard (250 usec -> 2 msec).

Based on the above filtering out short pulses with a duration less than
540 usec is incorrect.

To make such adapters work add support for a driver polling on MST
inerrupt flags, and wire this up in the i915 driver. The sink can clear
an interrupt it raised after 110 msec if the source doesn't respond, so
use a 50 msec poll period to avoid missing an interrupt. Polling of the
MST interrupt flags is explicitly allowed by the DP Standard.

This fixes MST probe failures I saw using this adapter and a DELL U2515H
monitor.

v2:
- Fix the wait event timeout for the no-poll case.
v3 (Ville):
- Fix the short pulse duration limits in the commit log prescribed by the
  DP Standard.
- Add code comment explaining why/how polling is used.
- Factor out a helper to schedule the port's hpd irq handler and move it
  to the rest of hotplug handlers.
- Document the new MST callback.
- s/update_hpd_irq_state/poll_hpd_irq/

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200604184500.23730-2-imre.deak@intel.com

Make the locking look symmetric with the unlocking.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200603211040.8190-2-imre.deak@intel.com

The mgag200 driver now uses managed functions for DRM devices. The
individual helpers for modesetting and memory managed are already
covered, so only device allocation and initialization is left for
conversion.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-15-tzimmermann@suse.de

Following current best practice, the instance of struct drm_device is now
embedded in struct mga_device. The respective field has been renamed from
'dev' to 'base' to reflect the relationship. Conversion from DRM device is
done via upcast. Using dev_private is no longer possible.

The patch also open-codes drm_dev_alloc() and DRM device initialization
is now performed by a call to drm_device_init().

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-14-tzimmermann@suse.de

Instances of struct drm_device and struct mga_device are now allocated
next to each other in mgag200_driver_load(). Yet another preparation
before embedding the DRM device instance in struct mga_device.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-13-tzimmermann@suse.de

Embedding the DRM device instance in struct mga_device will require
changes to device allocation. Moving the device initialization into
its own functions gets it out of the way.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-12-tzimmermann@suse.de

Moving the initializer and cleanup functions for device instances
to mgag200_drv.c prepares for the conversion to managed code. No
functional changes are made. Remove mgag200_main.c, which is now
empty.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-11-tzimmermann@suse.de

The naming of symbols in mgag200_drv.c is inconsistent. Fix that by
prefixing all names with mgag200_.

v2:
	* clarify commit message

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-10-tzimmermann@suse.de

Moving the DRM driver structures from the middle of the PCI code to
the top of the file makes it more readable. Also remove an obsolete
comment.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-9-tzimmermann@suse.de

The memory-management code now cleans up automatically as part of
device destruction.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-8-tzimmermann@suse.de

The VRAM setup in mgag200_drv.c is part of memory management and
should be done in the same place. Merge the code into the memory
management's init function.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-7-tzimmermann@suse.de

The MM setup code on mgag200 reads PCI BAR 0's start and length
several times. Reusing these values makes the code more readable.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-6-tzimmermann@suse.de

The mgag200 driver does not use TTM any longer. Rename the related file
to mgag200_mm.c (as in 'memory management').

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-5-tzimmermann@suse.de

Using the managed function simplifies the error handling. After
unloading the driver, the PCI device should now get disabled as
well.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-4-tzimmermann@suse.de

Support for HW cursors got remove by commit 5a77e2bf ("drm/mgag200:
Remove HW cursor") Apparently the source file was not deleted. Removed
it now.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 5a77e2bf ("drm/mgag200: Remove HW cursor")
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Allison Randal <allison@lohutok.net>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-3-tzimmermann@suse.de

Commit 94668ac7 ("drm/mgag200: Convert mgag200 driver to VRAM MM")
removed the implementation of mgag200_mmap(). Also remove the declaration.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 94668ac7 ("drm/mgag200: Convert mgag200 driver to VRAM MM")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Armijn Hemel <armijn@tjaldur.nl>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: <stable@vger.kernel.org> # v5.3+
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-2-tzimmermann@suse.de

The word 'descriptor' is misspelled throughout the tree.

Fix it up accordingly:
    decriptors -> descriptors

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200609124610.3445662-9-kieran.bingham+renesas@ideasonboard.com

The HACT_ACT field only needs to be written to when using a DSI display.
Let's move that setup to our DSI branch to clear a bit the common path.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/7a93436f97666a2aa025686ef3ff3606de4bec67.1590594512.git-series.maxime@cerno.tech

The hvs_latency_pix variable doesn't need to be a variable and can just be
defined.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/8535c679f79af8abaa1b7796261bfeda11f874fd.1590594512.git-series.maxime@cerno.tech

We'll need to access the crtc_state from outside of vc4_crtc.c, so let's
move it to vc4_drv.h

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/1e6e563f9c75961e2885c9d648a3130d3b46b6d1.1590594512.git-series.maxime@cerno.tech

of_device_get_match_data allow to simplify a bit the retrieval of the data
associated to the pixelvalve compatible. Let's use it.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/1ff06413a1350d28bc3e88b034ed7ad23834e5bd.1590594512.git-series.maxime@cerno.tech

Since we're going to introduce pixelvalve data structures for other SoCs
than the BCM2835, let's rename the structures defined in the code to
make it obvious which SoC we're targeting.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/39aed7dd512ce2a4560902974ec26b16b88ec68b.1590594512.git-series.maxime@cerno.tech

So far the plane creation was done when each CRTC was bound, and those
planes were only tied to the CRTC that was registering them.

This causes two main issues:
  - The planes in the vc4 hardware are actually not tied to any CRTC, but
    can be used with every combination

  - More importantly, so far, we allocate 10 planes per CRTC, with 3 CRTCs.
    However, the next generation of hardware will have 5 CRTCs, putting us
    well above the maximum of 32 planes currently allowed by DRM.

This patch is the first one in a series of patches that will take down both
of these issues so that we can support the next generation of hardware
while keeping a good amount of planes.

We start by changing the way the planes are registered to first registering
the primary planes for each CRTC in the CRTC bind function as we used to,
but moving the overlay and cursor creation to the main driver bind
function, after all the CRTCs have been bound, and make the planes
associated to all CRTCs.

This will slightly change the ID order of the planes, since the primary
planes of all CRTCs will be first, and then a pattern of 8 overlays, 1
cursor plane for each CRTC.

This shouldn't cause any trouble since the ordering between the planes is
preserved though.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/0b85a3fdb20bb4ff85fb62cabd082d5a65e2730b.1590594512.git-series.maxime@cerno.tech

The planes so far were created as part of the CRTC binding code with
each planes created associated only to one CRTC. However, the hardware
in the vc4 doesn't really have such constraint and can be used with any
CRTC.

In order to rework this, let's first move the overlay and cursor planes
creation to a function of its own.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/a378ea56214179f1f25fcd36ecc69511edd1e790.1590594512.git-series.maxime@cerno.tech

vc4_drv.h doesn't have any include guards which prevents it from being
included twice. Let's add them.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/68e89e315c4c35b313efc277c9642eca684e0ade.1590594512.git-series.maxime@cerno.tech

While the device tree and the driver expected a clock-names property, it
wasn't explicitly documented in the previous binding. The documented order
was wrong too, so make sure clock-names is there and in the proper order.

Cc: devicetree@vger.kernel.org
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/10ef2821e10886b66af5f8ba3e212aa87e9fd360.1590594512.git-series.maxime@cerno.tech

While the device tree and the driver expected a clock-names and a
clock-cells properties, it wasn't explicitly documented in the previous
binding. Make sure it is now.

Cc: devicetree@vger.kernel.org
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/867813ae6b3e9cff0e9627e6ed09569dee5573bc.1590594512.git-series.maxime@cerno.tech

While the device tree and the driver expected a clock-names property, it
wasn't explicitly documented in the previous binding. Make sure it is now.

Cc: devicetree@vger.kernel.org
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/8c7a4a9d85f7d1b23346367acf8d321ddad7cffe.1590594512.git-series.maxime@cerno.tech

The BCM283x SoCs have a display pipeline composed of several controllers
with device tree bindings that are supported by Linux.

Now that we have the DT validation in place, let's split into separate
files and convert the device tree bindings for those controllers to
schemas.

This is just a 1:1 conversion though, and some bindings were incomplete so
it results in example validation warnings that are going to be addressed in
the following patches.

Acked-by: Eric Anholt <eric@anholt.net>
Reviewed: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/2dc6384c945c7d35ab4f75464d3a77046dc125b3.1590594512.git-series.maxime@cerno.tech

The udl driver contains an implementation of GEM vmap and mmap
operations that is identical to the common SHMEM helper; except
that udl's code uses cached pages by default.

Convert udl to regular SHMEM helper functions. There's no reason
to have udl behave differently from all other SHMEM drivers. The
udl driver uses the SHMEM helper to enable caching.

v3:
	* rebased onto Daniel's shmem untangle series
v2:
	* implement .gem_create_object with SHMEM helper

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200609090820.20256-3-tzimmermann@suse.de

The helper drm_gem_shmem_create_object_cached() allocates an GEM SHMEM
object and sets the map_cached flag. Useful for drivers that want cached
mappings.

v3:
	* style fixes

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200609090820.20256-2-tzimmermann@suse.de

The .gem_print_info callback in struct drm_driver is obsolete and has
no users left. Remove it.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605073247.4057-44-tzimmermann@suse.de

DRM_GEM_CMA_DRIVER_OPS sets the functions in struct drm_driver
to their defaults. No functional changes are made.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605073247.4057-43-tzimmermann@suse.de

Create GEM objects with drm_gem_cma_create_object_default_funcs(), which
allocates the object and sets CMA's default object functions. Corresponding
callbacks in struct drm_driver are cleared. No functional changes are made.

Driver and object-function instances use the same callback functions, with
the exception of vunmap. The implementation of vunmap is empty and left out
in CMA's default object functions.

v3:
	* convert to DRIVER_OPS macro in a separate patch

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605073247.4057-42-tzimmermann@suse.de

DRM_GEM_CMA_DRIVER_OPS sets the functions in struct drm_driver
to their defaults. No functional changes are made.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605073247.4057-41-tzimmermann@suse.de