Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-upstream

Merge branch 'header-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'header-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (90 commits)
  headers_check fix: x86, swab.h
  headers_check fix: x86, sigcontext32.h
  headers_check fix: x86, sigcontext.h
  headers_check fix: x86, ptrace-abi.h
  headers_check fix: x86, mtrr.h
  headers_check fix: x86, mce.h
  headers_check fix: x86, kvm.h
  headers_check fix: x86, e820.h
  headers_check fix: linux/rtnetlink.h
  headers_check fix: linux/nubus.h
  headers_check fix: video/uvesafb.h
  headers_check fix: video/sisfb.h
  headers_check fix: sound/hdsp.h
  headers_check fix: mtd/inftl-user.h
  headers_check fix: linux/virtio_net.h
  headers_check fix: linux/virtio_console.h
  headers_check fix: linux/virtio_blk.h
  headers_check fix: linux/videodev.h
  headers_check fix: linux/video_encoder.h
  headers_check fix: linux/video_decoder.h
  ...

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  generic-ipi: use per cpu data for single cpu ipi calls
  cpumask: convert lib/smp_processor_id to new cpumask ops
  signals, debug: fix BUG: using smp_processor_id() in preemptible code in print_fatal_signal()

Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  irq: export __set_irq_handler() and handle_level_irq()

Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hrtimer: prevent negative expiry value after clock_was_set()
  hrtimers: allow the hot-unplugging of all cpus
  hrtimers: increase clock min delta threshold while interrupt hanging

Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, ds, bts: cleanup/fix DS configuration
  ring-buffer: reset timestamps when ring buffer is reset
  trace: set max latency variable to zero on default
  trace: stop all recording to ring buffer on ftrace_dump
  trace: print ftrace_dump at KERN_EMERG log level
  ring_buffer: reset write when reserve buffer fail
  tracing/function-graph-tracer: fix a regression while suspend to disk
  ring-buffer: fix alignment problem

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86 setup: fix asm constraints in vesa_store_edid
  xen: make sysfs files behave as their names suggest
  x86: tone down mtrr_trim_uncached_memory() warning
  x86: correct the CPUID pattern for MSR_IA32_MISC_ENABLE availability

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  leds: Fix bounds checking of wm8350->pmic.led
  regulator: move bq24022 init back to module_init instead of subsys_initcall

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (27 commits)
  MIPS: Alchemy: time.c build fix
  MIPS: RB532: Export rb532_gpio_set_func()
  MIPS: RB532: Update headers
  MIPS: RB532: Simplify dev3 init
  MIPS: RB532: Remove {get,set}_434_reg()
  MIPS: RB532: Move dev3 init code to devices.c
  MIPS: RB532: Fix set_latch_u5()
  MIPS: RB532: Fix init of rb532_dev3_ctl_res
  MIPS: RB532: Use driver_data instead of platform_data
  MIPS: RB532: Detect uart type, add platform device
  MIPS: RB532: remove useless CF GPIO initialisation
  MIPS: RB532: Auto disable GPIO alternate function
  MIPS: RB532: Add set_type() function to IRQ struct.
  MIPS: RC32434: Define io_map_base for PCI controller
  MIPS: RB532: Fix bit swapping in rb532_set_bit()
  MIPS: Use hardware watchpoints on all R1 and R2 CPUs.
  MIPS: Read watch registers with interrupts disabled.
  MIPS: Fix a typo in watchpoint register structure.
  MIPS: TXx9: Add support for TX4939 internal RTC
  MIPS: R2: Fix broken installation of cache error handler.
  ...

Fix an off-by-two memory error in console selection.

The loop below goes from sel_start to sel_end (inclusive), so it writes
one more character.  This one more character was added to the allocated
size (+1), but it was not multiplied by an UTF-8 multiplier.

This patch fixes a memory corruption when UTF-8 console is used and the
user selects a few characters, all of them 3-byte in UTF-8 (for example
a frame line).

When memory redzones are enabled, a redzone corruption is reported.
When they are not enabled, trashing of random memory occurs.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  igb: fix link reporting when using sgmii
  igb: prevent skb_over panic w/ mtu smaller than 1K
  igb: Fix DCA errors and do not use context index for 82576
  ipv6: compile fix for ip6mr.c
  packet: Avoid lock_sock in mmap handler
  sfc: Replace stats_enabled flag with a disable count
  sfc: SFX7101/SFT9001: Fix AN advertisements
  sfc: SFT9001: Always enable XNP exchange on SFT9001 rev B
  sfc: Update board info for hardware monitor on SFN4111T-R5 and later
  sfc: Test for PHYXS faults whenever we cannot test link state bits
  sfc: Reinitialise the PHY completely in case of a PHY or NIC reset
  sfc: Fix post-reset MAC selection
  sfc: SFN4111T: Fix GPIO sharing between I2C and FLASH_CFG_1
  sfc: SFT9001: Fix speed reporting in 1G PHY loopback
  sfc: SFX7101: Remove workaround for bad link training
  sfc: SFT9001: Enable robust link training
  sky2: fix hard hang with netconsoling and iface going up

The mmap_region() code would temporarily set the VM_ACCOUNT flag for
anonymous shared mappings just to inform shmem_zero_setup() that it
should enable accounting for the resulting shm object.  It would then
clear the flag after calling ->mmap (for the /dev/zero case) or doing
shmem_zero_setup() (for the MAP_ANON case).

This just resulted in vma merge issues, but also made for just
unnecessary confusion.  Use the already-existing VM_NORESERVE flag for
this instead, and let shmem_{zero|file}_setup() just figure it out from
that.

This also happens to make it obvious that the new DRI2 GEM layer uses a
non-reserving backing store for its object allocation - which is quite
possibly not intentional.  But since I didn't want to change semantics
in this patch, I left it alone, and just updated the caller to use the
new flag semantics.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When using sgmii the link was not being properly passed up to the driver
from the underlying link management functions.  This change corrects it so
that get_link_status is cleared when a link has been found.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A panic has been observed with frame sizes smaller than 1K.  This has been
root caused to the hardware spanning larger frames across multiple buffers
and then reporting the original frame size in the first descriptor.  To
prevent this we can enable set the LPE bit which in turn will restrict
packet sizes to those set in the RLPML register.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

82576 was being incorrectly flagged as needing a context index.  It does not as
each ring has it's own table of 2 contexts.

Driver was registering after registering the driver instead of the other way around.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/ipv6/ip6mr.c: In function 'pim6_rcv':
net/ipv6/ip6mr.c:368: error: implicit declaration of function 'csum_ipv6_magic'

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Impact: fix potential miscompile (currently believed non-manifest)

As the comment explains, the VBE DDC call can clobber any register.
Tell the compiler about that fact.

Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

As the mmap handler gets called under mmap_sem, and we may grab
mmap_sem elsewhere under the socket lock to access user data, we
should avoid grabbing the socket lock in the mmap handler.

Since the only thing we care about in the mmap handler is for
pg_vec* to be invariant, i.e., to exclude packet_set_ring, we
can achieve this by simply using a new mutex.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Martin MOKREJŠ <mmokrejs@ribosome.natur.cuni.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently we use a spin-lock to serialise statistics fetches and also
to inhibit them for short periods of time, plus a flag to
enable/disable statistics fetches for longer periods of time, during
online reset.  This was apparently insufficient to deal with the several
reasons for stats being disabled.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

All 10Xpress PHYs require autonegotiation all the time; enforce this
in the set_settings() method and do not treat it as a workaround.

Remove claimed support for 100M HD mode since it is not supported by
current firmware.

Do not set speed override bits when AN is enabled, and do not use
register 1.49192 for AN configuration as it can override what we set
elsewhere.

Always set the AN selector bits to 1 (802.3).

Fix confusion between Next Page and Extended Next Page.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This workaround is not specific to rev A.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Depending on the loopback mode, there may be no pertinent link state
bits.  In this case we test the PHYXS RX fault bit instead.  Make
sure to do this in all cases where there are no link state bits.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In particular, set pause advertising bits properly.

A PHY reset is not necessary to recover from the register self-test,
so use a "invisible" reset there instead.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Modify falcon_switch_mac() to always set NIC_STAT_REG, even if the the
MAC is the same as it was before.  This ensures that the value is
correct after an online reset.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change sfn4111t_reset() to change only GPIO output enables so that it
doesn't break subsequent I2C operations.

Update comments to explain exactly what we're doing.

Add a short sleep to make sure the FLASH_CFG_1 value is latched before
any subsequent I2C operations.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of disabling AN in loopback, just prevent restarting AN and
override the speed in sft9001_get_settings().

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Early versions of the SFX7101 firmware could complete link training in
a state where it would not adequately cancel noise (Solarflare bug
10750).  We previously worked around this by resetting the PHY after
seeing many Ethernet CRC errors.  This workaround is unsafe since it
takes no account of the interval between errors; it also appears to
be unnecessary with production firmware.  Therefore remove it.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable a firmware option that appears to be necessary for reliable
operation.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Printing anything over netconsole before hw is up and running is,
of course, not going to work.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix bounds checking of wm8350->pmic.led

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

This workaround was needed when regulator/ was not linked before both
power/ and usb/otg/ in drivers/Makefile. Now that it is even linked
before mfd/, this patch makes sure that bq24022 isn't probed before the
GPIO expander is set up.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

Impact: prevent false positive WARN_ON() in clockevents_program_event()

clock_was_set() changes the base->offset of CLOCK_REALTIME and
enforces the reprogramming of the clockevent device to expire timers
which are based on CLOCK_REALTIME. If the clock change is large enough
then the subtraction of the timer expiry value and base->offset can
become negative which triggers the warning in
clockevents_program_event().

Check the subtraction result and set a negative value to 0.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Impact: fix CPU hotplug hang on Power6 testbox

On architectures that support offlining all cpus (at least powerpc/pseries),
hot-unpluging the tick_do_timer_cpu can result in a system hang.

This comes from the fact that if the cpu going down happens to be the
cpu doing the tick, then as the tick_do_timer_cpu handover happens after the
cpu is dead (via the CPU_DEAD notification), we're left without ticks,
jiffies are frozen and any task relying on timers (msleep, ...) is stuck.
That's particularly the case for the cpu looping in __cpu_die() waiting
for the dying cpu to be dead.

This patch addresses this by having the tick_do_timer_cpu handover happen
earlier during the CPU_DYING notification. For this, a new clockevent
notification type is introduced (CLOCK_EVT_NOTIFY_CPU_DYING) which is triggered
in hrtimer_cpu_notify().

Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: avoid timer IRQ hanging slow systems

While using the function graph tracer on a virtualized system, the
hrtimer_interrupt can hang the system on an infinite loop.

This can be caused in several situations:

 - the hardware is very slow and HZ is set too high

 - something intrusive is slowing the system down (tracing under emulation)

... and the next clock events to program are always before the current time.

This patch implements a reasonable compromise: if such a situation is
detected, we share the CPUs time in 1/4 to process the hrtimer interrupts.
This is enough to let the system running without serious starvation.

It has been successfully tested under VirtualBox with 1000 HZ and 100 HZ
with function graph tracer launched. On both cases, the clock events were
increased until about 25 ms periodic ticks, which means 40 HZ.

So we change a hard to debug hang into a warning message and a system that
still manages to limp along.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

In Linus' current -git the cpumask member is now a pointer.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This kernel symbol provides a way for drivers to switch on alternate
function for a certain GPIO pin. Turning it off is done implicitly when
changing the GPIO direction, as that would be fixed when using the given
pin als alternate function.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Remove the {set,get}_434_reg() prototypes, as the functions have been
removed. Also move the prototypes for {get,set}_latch_u5() to the correct
place.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

As rb532_dev3_ctl_res is not used by any platform device, it can be dropped
when not used for holding the physical address of the device 3 controller.

Also a size of one byte should suffice when ioremapping the physical
address mentioned above, as only a single byte is being read from and
written to it.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

These kernel symbols are unused. Also, since dev3 init has been moved to
devices.c, set_434_reg() breaks compiling as it uses dev3.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>