dra76-evm is a board based on TI's dra76 processor targeting
for infotainment systems. Adding support for this platform.

dra76-evm and dra7-evm has a similar layout except with few differences.
So create a dra7-evm-common.dtsi with similarities on dra76-evm and
dra7-evm. Include this common dtsi in both dra7-evm.dts and dra76-evm.dts

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

dra76 family is a high-performance, infotainment application
device, based on OMAP architecture on a 28-nm technology.
This contains most of the subsystems, peripherals that are
available on dra74, dra72 family. This SoC mainly features
Subsystems:
- 2 x Cortex-A15 with max speed of 1.8GHz
- 2 X DSP
- 2 X Cortex-M4 IPU
- ISS
- CAL
- DSS
- VPE
- VIP
Connectivity peripherals:
- 1 USB3.0 and 3 USB2.0 subsystems
- 2 x SATA
- 2 x PCI Express Gen2
- 3-port Gigabit ethernet switch
- 2 x CAN
- MCAN

Adding basic dts support for DRA76 family while reusing the
data available in dra7.dtsi, dra74x.dtsi.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add pcie1 dt node in order for the controller to operate in
endpoint mode. However since none of the dra7 based boards have
slots configured to operate in endpoint mode, keep EP mode
disabled.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add support for Moxa UC-8100-ME-T open platform

The UC-8100-ME-T computing platform is designed
for embedded data acquisition industrial applications

The features of UC-8100-ME-T series are:
* eMMC
* SPI flash
* SD slot
* 2x LAN
* 2 RS-232/422/485 ports, software-selectable
* Mini PCIe form factor with USB signal
* USB host
* EEPROM
* TPM
* Watchdog
* RTC
* User gpio-keys
* User LEDs
* User button

Signed-off-by: SZ Lin <sz.lin@moxa.com>
Acked-by: Rob Herring <robh@kernel.org>
[tony@atomide.com: fix unit adress as suggested by Rob]
Signed-off-by: Tony Lindgren <tony@atomide.com>

Currently the default method of prefetch polled shows the highest
possible read and write speed when minimal non NAND background
activity is being done. But it is also very CPU intensive to reach
these high speeds (CPU load of 99% via mtd performance tests). While
DMA prefetch only uses 50% of the CPU to achieve around 23% less in
top read and write performance.

However, as the non NAND CPU load increases the read and write
performance takes a large hit when using polled prefetch. Therefore,
prefetch dma mode ends up outperforming prefetch polled in general
"system level" test. So switch to using dma prefetch by default since
it is likely what most users would prefer.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Currently the default method of prefetch polled shows the highest
possible read and write speed when minimal non NAND background
activity is being done. But it is also very CPU intensive to reach
these high speeds (CPU load of 99% via mtd performance tests). While
DMA prefetch only uses 50% of the CPU to achieve around 23% less in
top read and write performance.

However, as the non NAND CPU load increases the read and write
performance takes a large hit when using polled prefetch. Therefore,
prefetch dma mode ends up outperforming prefetch polled in general
"system level" test. So switch to using dma prefetch by default since
it is likely what most users would prefer.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Currently the default method of prefetch polled shows the highest
possible read and write speed when minimal non NAND background
activity is being done. But it is also very CPU intensive to reach
these high speeds (CPU load of 99% via mtd performance tests). While
DMA prefetch only uses 50% of the CPU to achieve around 23% less in
top read and write performance.

However, as the non NAND CPU load increases the read and write
performance takes a large hit when using polled prefetch. Therefore,
prefetch dma mode ends up outperforming prefetch polled in general
"system level" test. So switch to using dma prefetch by default since
it is likely what most users would prefer.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add vibrator to Droid4's device tree.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Set default mode for vaudio, which may be left in standby mode
if the system is booted via kexec from Android.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>

All nodes inhert "interrupt-parent" property from root
node. Removed the aforementioned property from usbhsohci,
usbhsehci, ssi_port1, ssi_port2 nodes to avoid duplication.

Signed-off-by: Karthik Tummala <karthik@techveda.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Devices using an external encoder, ESD protection and level shifter
such as tpd12s015 or ip4791cz12 have the CEC pull in the encoder
chip. And on var-som-om44, there is external pull up resistor R30.

So the internal CEC pull-up resistor needs to be disabled as otherwise
the external and internal pull are parallel making the pull value
much smaller than intended. This leads into the CEC not working as
reported by Hans Verkuil <hverkuil@xs4all.nl>.

Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Dmitry Lifshitz <lifshitz@compulab.co.il>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add support for onboard gpio buzzer. It works using
the gpio-beeper driver. Pinmux entries for GPIO
controlling the buzzer are also added.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add dra7 iodelay configuration.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

The interrupt for power button is static data that comes from the
datasheet, there is no reason to need to define this value on every
board so seams reasonable put this information into the common tps65217
file.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The interrupt specifiers for USB and AC charger input are static data that
comes from the datasheet, there is no reason to need to define these values
on every board so seem reasonable put this information into the common
tps65217 file.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Replace deprecated "vmmc_aux" with the generic "vqmmc" binding for
MMC IO supply.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The GPIO polarity for MMC1 card detect is set to '0' which means
active-high. However the polarity should be active-low. Fix it
here.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The GPIO polarity for MMC1 card detect is set to '0' which means
active-high. However the polarity should be active-low. Fix it
here.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Convert 'u8 inline' to 'inline u8' to be the same style used by the rest
of the kernel.

Miscellanea:

jornada_ssp_reverse is an odd function.
It is declared inline but is also EXPORT_SYMBOL.
It is also apparently only used by jornada720_ssp.c
Likely the EXPORT_SYMBOL could be removed and the function
converted to static.

The addition of static and removal of EXPORT_SYMBOL was not done.

Link: http://lkml.kernel.org/r/5bd3b2bf39c6c9caf773949f18158f8f5ec08582.1499284835.git.joe@perches.com


Signed-off-by: Joe Perches <joe@perches.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

asmlinkage is either 'extern "C"' or blank.

Move the uses of asmlinkage before the return types to be similar
to the rest of the kernel.

Link: http://lkml.kernel.org/r/005b8e120650c6a13b541e420f4e3605603fe9e6.1499284835.git.joe@perches.com


Signed-off-by: Joe Perches <joe@perches.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now that explicitly executed loaders are loaded in the mmap region, we
have more freedom to decide where we position PIE binaries in the
address space to avoid possible collisions with mmap or stack regions.

4MB is chosen here mainly to have parity with x86, where this is the
traditional minimum load location, likely to avoid historically
requiring a 4MB page table entry when only a portion of the first 4MB
would be used (since the NULL address is avoided).

For ARM the position could be 0x8000, the standard ET_EXEC load address,
but that is needlessly close to the NULL address, and anyone running PIE
on 32-bit ARM will have an MMU, so the tight mapping is not needed.

Link: http://lkml.kernel.org/r/1498154792-49952-2-git-send-email-keescook@chromium.org


Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Pratyush Anand <panand@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Qualys Security Advisory <qsa@qualys.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 7dd96816 ("bitmap: bitmap_equal memcmp optimization") was
rather more restrictive than necessary; we can use memcmp() to implement
bitmap_equal() as long as the number of bits can be proved to be a
multiple of 8.  And architectures other than s390 may be able to make
good use of this optimisation.

[arnd@arndb.de: fix build: add a memcmp() declaration]
  Link: http://lkml.kernel.org/r/20170630153908.3439707-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/20170628153221.11322-5-willy@infradead.org


Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The global variable 'rd_size' is declared as 'int' in source file
arch/arm/kernel/atags_parse.c and as 'unsigned long' in
drivers/block/brd.c.  Fix this inconsistency.

Additionally, remove the declarations of rd_image_start, rd_prompt and
rd_doload from parse_tag_ramdisk() since these duplicate existing
declarations in <linux/initrd.h>.

Link: http://lkml.kernel.org/r/20170627065024.12347-1-bart.vanassche@wdc.com


Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: Zhaohongjiang <zhaohongjiang@huawei.com>
Cc: Miao Xie <miaoxie@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since commit 97ad2bdc ("ARM/PCI: Convert PCI scan API to
pci_scan_root_bus_bridge()") the space for struct pci_sys_data is allocated
by pci_alloc_host_bridge() as part of the struct pci_host_bridge.

Therefore, failure paths must deallocate the entire pci_host_bridge by
using pci_free_host_bridge().

Fixes: 97ad2bdc ("ARM/PCI: Convert PCI scan API to pci_scan_root_bus_bridge()")
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andrew Lunn <andrew@lunn.ch>

Since commit fcc8487d ("uapi: export all headers under uapi
directories"), all (and only) headers under uapi directories are
exported, but asm-generic wrappers are still exceptions.

To complete de-coupling the uapi from kernel headers, move generic-y
of exported headers to uapi/asm/Kbuild.

With this change, "make headers_install" will just need to parse
uapi/asm/Kbuild to build up exported headers.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

no users left

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

on MMU targets EFAULT is possible here.  Make both return 0 or error,
passing what used to be the return value of flat_get_addr_from_rp()
by reference.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The S500 SoC can start secondary CPUs without busy-looping for pen_release,
so simplify the SMP code compared to the LeMaker kernel tree.

Fixes: 172067e0 ("ARM: owl: Implement CPU enable-method for S500")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Cc: David Liu <liuwei@actions-semi.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Rely on the fallback to "Generic DT based system".
This change is visible in /proc/cpuinfo.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Legacy PCI host controllers (ie host controllers that set-up the PCI bus
through the ARM pci_common_init() API) are currently relying on
pci_fixup_irqs() to assign legacy PCI irqs to devices.  This is not ideal
in that pci_fixup_irqs() assigns IRQs for all PCI devices present in a given
system some of which may well be enabled by the time pci_fixup_irqs() is
called (ie a system with multiple host controllers).  With the introduction
of struct pci_host_bridge.(*map_irq) pointer it is possible to assign IRQs
for all devices originating from a PCI host bridge at probe time; this is
implemented through pci_assign_irq() that relies on the struct
pci_host_bridge.map_irq pointer to map IRQ for a given device.

The benefits this brings are twofold:

  - the IRQ for a device is assigned once at probe time
  - the IRQ assignment works also for hotplugged devices

Remove pci_fixup_irqs() call from bios32 code and rely on pci_assign_irq()
to carry out the IRQ mapping at device probe time.

The map_irq() and swizzle_irq() struct pci_host_bridge callbacks are set-up
in the struct pci_host_bridge created in the bios32 pcibios_init_hw()
function and mach-* code paths (for PCI mach implementations that require a
specific struct hw_pci.(*scan) function callback).

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
[bhelgaas: folded in fixes from Lorenzo:
http://lkml.kernel.org/r/20170701140629.GC8977@red-moon

]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andrew Lunn <andrew@lunn.ch>

This reverts commits 2c0cba48 ("arm: sun8i: sunxi-h3-h5: Add dt node
for the syscon control module") to 2428fd0f ("arm64: defconfig: Enable
dwmac-sun8i driver on defconfig") and 3432a86e ("arm: sun8i:
orangepipc: use internal phy-mode") to 5a79b4f2 ("arm: sun8i:
orangepi-2: use internal phy-mode") that should be merged
through the arm-soc tree, and end up in merge conflicts and build failures.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With the new task struct randomization, we can run into a build
failure for certain random seeds, which will place fields beyond
the allow immediate size in the assembly:

arch/arm/kernel/entry-armv.S: Assembler messages:
arch/arm/kernel/entry-armv.S:803: Error: bad immediate value for offset (4096)

Only two constants in asm-offset.h are affected, and I'm changing
both of them here to work correctly in all configurations.

One more macro has the problem, but is currently unused, so this
removes it instead of adding complexity.

Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[kees: Adjust commit log slightly]
Signed-off-by: Kees Cook <keescook@chromium.org>

DMA operations for NOMMU case have been just factored out into
separate compilation unit, so don't keep dead code.

Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Andras Szemzo <sza@esh.hu>
Tested-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Now, we have dedicated non-cacheable region for consistent DMA
operations. However, that region can still be marked as bufferable by
MPU, so it'd be safer to have barriers by default. M-class machines
that didn't need it until now also likely won't need it in the future,
therefore, we offer this as an option.

Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Andras Szemzo <sza@esh.hu>
Tested-by: Alexandre TORGUE <alexandre.torgue@st.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>

R/M classes of cpus can have memory covered by MPU which in turn might
configure RAM as Normal i.e. bufferable and cacheable. It breaks
dma_alloc_coherent() and friends, since data can stuck in caches now
or be buffered.

This patch factors out DMA support for NOMMU configuration into
separate entity which provides dedicated dma_ops. We have to handle
there several cases:
- configurations with MMU/MPU setup
- configurations without MMU/MPU setup
- special case for M-class, since caches and MPU there are optional

In general we rely on default DMA area for coherent allocations or/and
per-device memory reserves suitable for coherent DMA, so if such
regions are set coherent allocations go from there.

In case MMU/MPU was not setup we fallback to normal page allocator for
DMA memory allocation.

In case we run M-class cpus, for configuration without cache support
(like Cortex-M3/M4) dma operations are forced to be coherent and wired
with dma-noop (such decision is made based on cacheid global
variable); however, if caches are detected there and no DMA coherent
region is given (either default or per-device), dma is disallowed even
MPU is not set - it is because M-class implement system memory map
which defines part of address space as Normal memory.

Reported-by: Alexandre Torgue <alexandre.torgue@st.com>
Reported-by: Andras Szemzo <sza@esh.hu>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Andras Szemzo <sza@esh.hu>
Tested-by: Alexandre TORGUE <alexandre.torgue@st.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
[hch: removed the dma_supported() implementation that isn't required anymore]
Signed-off-by: Christoph Hellwig <hch@lst.de>

The pmd containing memblock_limit is cleared by prepare_page_table()
which creates the opportunity for early_alloc() to allocate unmapped
memory if memblock_limit is not pmd aligned causing a boot-time hang.

Commit 965278dc ("ARM: 8356/1: mm: handle non-pmd-aligned end of RAM")
attempted to resolve this problem, but there is a path through the
adjust_lowmem_bounds() routine where if all memory regions start and
end on pmd-aligned addresses the memblock_limit will be set to
arm_lowmem_limit.

Since arm_lowmem_limit can be affected by the vmalloc early parameter,
the value of arm_lowmem_limit may not be pmd-aligned. This commit
corrects this oversight such that memblock_limit is always rounded
down to pmd-alignment.

Fixes: 965278dc ("ARM: 8356/1: mm: handle non-pmd-aligned end of RAM")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Since the PHY used is internal, simply set phy-mode as internal.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since the PHY used is internal, simply set phy-mode as internal.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since the PHY used is internal, simply set phy-mode as internal.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since the PHY used is internal, simply set phy-mode as internal.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>