Pull "arm: dts: Add Altera SDRAM EDAC bindings & devicetree entries" From Dinh Nguyen:

5 of the 6 patches are DTS updates and the 1 patch is updating
the MAINTAINERS entry with my new email address.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'socfpga_update_for_v3.18' of git://git.rocketboards.org/linux-socfpga-next:
  arm: dts: Add Altera SDRAM EDAC bindings & devicetree entries.
  ARM: dts: socfpga: memreserve first 4KB for future system use
  ARM: dts: socfpga: Add SD card detect
  ARM: dts: socfpga: remove extra alias in the ArriaV devkit
  ARM: dts: socfpga: unuse the slot-node and deprecate the supports-highspeed for dw-mmc
  MAINTAINERS: update entries for ARM/SOCFPGA platform

Merge tag 'davinci-for-v3.18/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci

 into next/dt

Pull "DT additions for DA850" from Sekhar Nori:

Adds EDMA and audio support

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'davinci-for-v3.18/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: DTS: da850-evm: Enable audio via simple-card
  ARM: DTS: da850-evm: Add node for tlv320aic3106 codec
  ARM: DTS: da850-evm: Enable McASP via DT boot
  ARM: DTS: da850: Add node for McASP
  ARM: DTS: da850: Add node for edma0
  ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for mcasp0

Pull "Second batch of AT91 DT patches for 3.18" from Nicolas Ferre:

- 2 little fixes for at91sam9x5 and at91sam9n12ek
- removal of a board specific hook for sama5d3xek about phy fixup
  replaced with proper DT property definition.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'at91-dt2' of git://github.com/at91linux/linux-at91:
  ARM: at91: remove phy fixup for sama5d3xek boards
  ARM: at91/dt: describe rgmii ethernet phy connected to sama5d3xek boards
  ARM: at91/dt: sam9n12ek: ohci: add port and vbus property
  ARM: at91/dt: sam9x5: fix ADC compatible string

Merge "First batch of AT91 DT material for 3.18" from Nicolas Ferre:

- RAM controller rework for multiple controller SoCs
- shutdown controller addtion

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'at91-dt' of git://github.com/at91linux/linux-at91:
  ARM: at91/dt: sama5d3: Add shutdown controller
  ARM: at91/dt: Declare a second ram controller when relevant
  ARM: at91/dt: at91sam9: use ddrck in ramc
  ARM: at91/dt: sama5d3: define mpddr clock and ramc clocks

Merge tag 'renesas-dt3-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas

 into next/dt

Merge "Third Round of Renesas ARM Based SoC DT Updates for v3.18" from Simon Horman:

* Use tabs for indentation in kzm9g-reference and r8a7779 DTS(I) files
* Add platform device tree bindings documentation
* Add SoC-specific thermal compatible property to r8a73a4 and r8a7779

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'renesas-dt3-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: kzm9g-reference dts: Use tabs for indentation
  ARM: shmobile: r8a7779 dtsi: Use tabs for indentation
  ARM: shmobile: Add platform device tree bindings documentation
  ARM: shmobile: r8a73a4 dtsi: Add SoC-specific thermal compatible property
  ARM: shmobile: r8a7779 dtsi: Add SoC-specific thermal compatible property

Merge tag 'renesas-dt2-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas

 into next/dt

Merge "Second Round Of Renesas ARM Based SoC DT Updates For v3.18" from Simon Horman:

* Tidy up interrupt-parents
* Add clocks register defines for r8a7740 SoC
* Add JPU clock to r8a7791 and r8a7790 SoCs

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'renesas-dt2-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: sh73a0 dtsi: Move interrupt-parent to the top
  ARM: shmobile: r8a7791 dtsi: Remove superfluous interrupt-parent
  ARM: shmobile: r8a7790 dtsi: Remove superfluous interrupt-parent
  ARM: shmobile: r8a7779 dtsi: Remove superfluous interrupt-parent
  ARM: shmobile: r8a7740: clock register bits
  ARM: shmobile: r8a7791: Add JPU clock dt and CPG define.
  ARM: shmobile: r8a7790: Add JPU clock dt and CPG define.

Merge tag 'renesas-dt-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas

 into next/dt

Merge "Renesas ARM Based SoC DT Updates for v3.18" from Simon Horman:

* Add VIN support to lager/r8a7790, koelsch/r8a7791 and henninger/r8a7791
* Enable DMA for MSIOF and QSPI on r8a7790 and r8a7791

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'renesas-dt-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: lager: add VIN1/ADV7180 device nodes
  ARM: shmobile: r8a7790: add VIN device nodes
  ARM: shmobile: r8a7790 dtsi: Enable DMA for MSIOF
  ARM: shmobile: r8a7790 dtsi: Enable DMA for QSPI
  ARM: shmobile: r8a7791 dtsi: Enable DMA for MSIOF
  ARM: shmobile: r8a7791 dtsi: Enable DMA for QSPI
  ARM: shmobile: r8a7791: Add DMAC devices to DT
  ARM: shmobile: r8a7790: Add DMAC devices to DT
  ARM: shmobile: r8a7790: Add DMAC clocks to DT
  ARM: shmobile: koelsch: add VIN1/ADV7180 DT support
  ARM: shmobile: henninger: add VIN0/ADV7180 DT support
  ARM: shmobile: r8a7791: add VIN DT support

Merge tag 'v3.18-rockchip-dma' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Pull "rockchip dma support" from Heiko Stuebner:

Enable the AMBA bus and add necessary dma-controller dts nodes

* tag 'v3.18-rockchip-dma' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip

:
  ARM: dts: rockchip: add rk3066 and rk3188 dma controllers
  ARM: dts: rockchip: add rk3288 dma controllers
  ARM: rockchip: enable the AMBA bus

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v3.18-rockchip-dts1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Pull "First hunk of Rockchip dts changes for 3.18" from Heiko Stuebner:

- dw_mmc conversion from Jaehoon Chung
- mmc support for rk3288
- pwm + backlight for rk3288
- rtc for Radxa Rock
- saradc base nodes

* tag 'v3.18-rockchip-dts1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip

:
  ARM: dts: rockchip: add saradc nodes
  ARM: dts: rockchip: add hym8563 rtc to Radxa Rock board
  ARM: dts: Enable PWM backlight on rk3288-evb
  ARM: dts: Add main PWM info to rk3288
  ARM: dts: Move the PMIC interrupt pinctrl line to rk3288-evb common
  ARM: dts: Enable emmc and sdmmc on the rk3288-evb boards
  ARM: dts: Add emmc and sdmmc to the rk3288 device tree
  ARM: dts: rockchip: unuse the slot-node and deprecate the supports-highspeed for dw-mmc

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add the Altera SDRAM EDAC bindings and device tree changes to the Altera SoC
project.

There was a discussion thread on whether this driver should be an mfd driver
or just make use of syscon, which is already a mfd. Ultimately, the
decision to use a simple syscon interface was reached.[1]

[1] https://lkml.org/lkml/2014/7/30/514



Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Acked-by: Pavel Machek <pavel@denx.de>
[dinguyen] cleaned-up commit header and remove version history.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>

This patch adds a /memreserve/ section to reserve the first 4K for future
use by the system. One possible use-case is trampoline code used to bring
secondary cores online.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: Pavel Machek <pavel@denx.de>
---
v3: Update commit message based on Mark Rutland's comment
v2: Add a comment in the dts files

Revision D of the SOCFGPA devkit has a GPIO line used for SD/MMC card detect.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: Pavel Machek <pavel@denx.de>

commit [2755e187 dts: socfpga: Add DTS entry for adding the stmmac glue
layer for stmmac.] added an extra ethernet alias in the ArriaV devkit
board file. This patch removes it.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>

dw-mmc

dw-mmc controller can support multiple slots.
But, there are no use-cases anywhere. So we don't need to support the
slot-node for dw-mmc controller.
And "supports-highspeed" property in dw-mmc is deprecated.
"supports-highspeed" property can be replaced with "cap-sd/mmc-highspeed".

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Tushar Behera <trblinux@gmail.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>

Add both the cpu and peripheral pl330 dma controllers present in rk3188 socs.
The first dma controller can change between secure and non-secure mode. Both
instances are added but the non-secure variant is left disabled by default,
as on the majority of boards the bootloader leaves it in secure mode.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Add both the bus and peripheral pl330 dma controllers present in rk3288 socs.
The first dma controller can change between secure and non-secure mode. Both
instances are added but the non-secure variant is left disabled by default,
as on the majority of boards the bootloader leaves it in secure mode.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Kever Yang <kever.yang@rock-chips.com>

This is needed to access the pl330 dma controllers on Rockchip SoCs.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>

Checkpatch says:

ERROR: code indent should use tabs where possible

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Checkpatch says:

ERROR: code indent should use tabs where possible

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

These board specific delays are now configured through micrel's specific
DT bindings (see Documentation/devicetree/bindings/net/micrel-ksz9021.txt).

Remove this phy fixup registration from sama5 DT machine file to keep it
as generic as possible.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Tested-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add ethernet-phy nodes and specify phy interrupt (connected to pin PB25)
and board specific timing configs.

Atmel has two different HW designs for its CPU modules: the first one
(produced by Embest) is connecting PHYAD[0-2] pins to pull up resistors
and the other one (produced by Ronetix) is connecting PHYAD0 to a pull up
resistor and PHYAD[1-2] to pull down resistors.
As a result, Ronetix design will have its PHY available at address 0x1 and
Embest design at 0x7.
By defining both phys we're letting the phy core detect the one actually
available on the MDIO bus.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Tested-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add the port number and vbus property for ohci port, or else if
bootloader won't configure the vbus pin, the 5v supply is not
power on, so can not work with usb devices.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Use the correct compatible string for the ADC of the at91sam9x5 family of SoCs.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add Renesas SH-Mobile, R-Mobile, and R-Car Platform Device Tree Bindings
Documentation, listing supported SoCs and boards.

This allows to use checkpatch to validate DTSes referring to Renesas
shmobile SoCs, and boards containing those SoCs.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[horms+renesas@verge.net.au: tweaked title]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

The thermal node used the generic compatible property only.
Add the SoC-specific one, to make it future proof.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

The thermal node used the generic compatible property only.
Add the SoC-specific one, to make it future proof.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Update email address, add W and T entries.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>

Add the core device nodes for the SARADC found on both the Cortex-A9 series
(rk3066 and rk3188) as well as the newer rk3288.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The Radxa Rock uses a hym8563 as rtc. Add the i2c device and necessary
pinconfig for the interrupt pin - labeled rtc_int in the schematics.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>

PWM0 is the PWM associated with the LCD backlight.  Enable it.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This adds the PWM info (other than the VOP PWM) to the main rk3288
dtsi file.

Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The audio on the board is using McASP <-> tlv320aic3106 codec and we have
LineIn and LineOut jacks.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

The board uses aic3106 for audio.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Add pinctrl nodes for the McASP0 pins and configure McASP to the desired
mode for the board.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Node for mcasp0

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Add DT node for edma0.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Add OF_DEV_AUXDATA for mcasp to be able to use clocks.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Pull NFS client fixes from Trond Myklebust:
 "Highlights:

   - more fixes for read/write codepath regressions
     * sleeping while holding the inode lock
     * stricter enforcement of page contiguity when coalescing requests
     * fix up error handling in the page coalescing code

   - don't busy wait on SIGKILL in the file locking code"

* tag 'nfs-for-3.17-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  nfs: Don't busy-wait on SIGKILL in __nfs_iocounter_wait
  nfs: can_coalesce_requests must enforce contiguity
  nfs: disallow duplicate pages in pgio page vectors
  nfs: don't sleep with inode lock in lock_and_join_requests
  nfs: fix error handling in lock_and_join_requests
  nfs: use blocking page_group_lock in add_request
  nfs: fix nonblocking calls to nfs_page_group_lock
  nfs: change nfs_page_group_lock argument

Merge tag 'renesas-sh-drivers-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas

Pull SH driver fix from Simon Horman:
 "Confine SH_INTC to platforms that need it"

* tag 'renesas-sh-drivers-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  sh: intc: Confine SH_INTC to platforms that need it