fix:

 drivers/built-in.o: In function `acpi_pci_irq_enable':
 : undefined reference to `mp_config_acpi_gsi'

Signed-off-by: Ingo Molnar <mingo@elte.hu>

on 64-bit we only get valid max_pfn_mapped after init_memory_mapping().

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

on 32-bit in head_32.S after initial page table is done, we get initial
max_pfn_mapped, and then kernel_physical_mapping_init will give us
a final one.

We need to use that to make sure find_e820_area will get valid addresses
for boot_map and for NODE_DATA(0) on numa32.

XEN PV and lguest may need to assign max_pfn_mapped too.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

use find_e820_area to get address space...

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

make mptable to be consistent with acpi routing, so we could:

1. kexec kernel with acpi=off
2. work around BIOSes where acpi routing is working, but mptable is
   not right, so can use kernel/kexec to start other OSes that don't have
   good acpi support.

command line: update_mptable

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

also fix the print out of node_remap_end_vaddr

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

we don't need to call memory_present that early.
numa and sparse will call memory_present later and might
even fail, it will call memory_present for the full range.

also for sparse it will call alloc_bootmem ... before we set up bootmem.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

... otherwise alloc_remap will not get node_mem_map from kva area, and
alloc_node_mem_map has to alloc_bootmem_node to get mem_map.
It will use two low address copies ...

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

so every element will represent 64M instead of 256M.

AMD opteron could have HW memory hole remapping, so could have
[0, 8g + 64M) on node0. Reduce element size to 64M to keep that on node 0

Later we need to use find_e820_area() to allocate memory_node_map like
on 64-bit. But need to move memory_present out of populate_mem_map...

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

fix this build bug:

 drivers/acpi/pci_irq.c: In function 'acpi_pci_irq_enable':
 drivers/acpi/pci_irq.c:574: error: implicit declaration of function 'mp_config_acpi_gsi'

Signed-off-by: Ingo Molnar <mingo@elte.hu>

we already have them in e820.h

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

on two node system (16g RAM) with numa config I got this crash:

get_memcfg_from_srat: assigning address to rsdp
RSD PTR  v0 [ACPIAM]
ACPI: Too big length in RSDT: 92
failed to get NUMA memory information from SRAT table
NUMA - single node, flat memory mode
Node: 0, start_pfn: 0, end_pfn: 153
 Setting physnode_map array to node 0 for pfns:
 0
...
Pid: 0, comm: swapper Not tainted 2.6.26-rc4 #4
 [<80b41289>] hlt_loop+0x0/0x3
 [<8011efa0>] ? alloc_remap+0x50/0x70
 [<8079e32e>] alloc_node_mem_map+0x5e/0xa0
 [<8012e77b>] ? printk+0x1b/0x20
 [<80b590f6>] free_area_init_node+0xc6/0x470
 [<80b588fc>] ? __alloc_bootmem_node+0x2c/0x50
 [<80b58ad8>] ? find_min_pfn_for_node+0x38/0x70
 [<8012e77b>] ? printk+0x1b/0x20
 [<80b597c4>] free_area_init_nodes+0x254/0x2d0
 [<80b544d7>] zone_sizes_init+0x97/0xa0
 [<80b48a03>] setup_arch+0x383/0x530
 [<8012e77b>] ? printk+0x1b/0x20
 [<80b41aa4>] start_kernel+0x64/0x350
 [<80b412d8>] i386_start_kernel+0x8/0x10
 =======================

this patch increases the acpi table limit to 32.
Also match early_ioremap() with early_iounmap().

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

reserve early numa kva, so it will not clash with new RAMDISK

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

reserve_early pgdata for 32bit numa

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

introduce init_pg_table_start, so xen PV could specify the value.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

remove extra -1 in reseve_early calling
    panic if can not find space for new RAMDISK

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

UP builds with LOCAL_APIC=y and IO_APIC=n fail with a missing
reference to mp_bus_not_pci. Distangle the mpparse code some more and
move the ioapic specific bus check into a separate function.

This code needs sume urgent un#ifdef surgery all over the place.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

and make e820_mark_nosave_regions to take limit_pfn to use max_low_pfn
for 32bit and end_pfn for 64bit

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Sitsofe Wheeler reported boot problems on linux-next.

It looks like the same issue as found by Soeren Sandman in 7575217f656a93,
"x86: initialize all fields of mp_irqs[mp_irq_entries]".

But his fix is also not complete, as dstapic is used before it assigned.

Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Bisected-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Commit "x86: make config_irqsrc not MPspec specific" introduced some uses
of uninitialized fields in mp_config_acpi_legacy_irqs(). I need the
following patch to get sched-devel/master to boot.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

the new output is:

 MPTABLE: OEM ID: SUN
 MPTABLE: Product ID: 4600 M2
 MPTABLE: APIC at: 0x

instead of it all in one line with <6> and double Product ID...

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

global pci_mem_start needs a declaration. include pci.h

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

mpparse is the only user of mp_ioapic_routing.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

use find_e820_area to find addess for new RAMDISK, instead of using ram blindly

also print out low ram and bootmap info

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

move early_res related from e820_64.c to e820.c
make edba detection to be done in head32.c
remove smp_alloc_memory, because we have fixed trampoline address now.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>

 arch/x86/kernel/e820.c              |  214 ++++++++++++++++++++++++++++++++++++
 arch/x86/kernel/e820_64.c           |  196 --------------------------------
 arch/x86/kernel/head32.c            |   76 ++++++++++++
 arch/x86/kernel/setup_32.c          |  109 +++---------------
 arch/x86/kernel/smpboot.c           |   17 --
 arch/x86/kernel/trampoline.c        |    2
 arch/x86/mach-voyager/voyager_smp.c |    9 -
 include/asm-x86/e820.h              |    6 +
 include/asm-x86/e820_64.h           |    9 -
 include/asm-x86/smp.h               |    1
 arch/x86/kernel/e820.c              |  214 ++++++++++++++++++++++++++++++++++++
 arch/x86/kernel/e820_64.c           |  196 --------------------------------
 arch/x86/kernel/head32.c            |   76 ++++++++++++
 arch/x86/kernel/setup_32.c          |  109 +++---------------
 arch/x86/kernel/smpboot.c           |   17 --
 arch/x86/kernel/trampoline.c        |    2
 arch/x86/mach-voyager/voyager_smp.c |    9 -
 include/asm-x86/e820.h              |    6 +
 include/asm-x86/e820_64.h           |    9 -
 include/asm-x86/smp.h               |    1
 arch/x86/kernel/e820.c              |  214 ++++++++++++++++++++++++++++++++++++
 arch/x86/kernel/e820_64.c           |  196 --------------------------------
 arch/x86/kernel/head32.c            |   76 ++++++++++++
 arch/x86/kernel/setup_32.c          |  109 +++---------------
 arch/x86/kernel/smpboot.c           |   17 --
 arch/x86/kernel/trampoline.c        |    2
 arch/x86/mach-voyager/voyager_smp.c |    9 -
 include/asm-x86/e820.h              |    6 +
 include/asm-x86/e820_64.h           |    9 -
 include/asm-x86/smp.h               |    1
 10 files changed, 320 insertions(+), 319 deletions(-)

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Add to the kernels boot memory map 'memmap' entries found in
the EFI memory descriptors passed in from the BIOS.

On EFI systems, up to E820MAX == 128 memory map entries can
be passed via the legacy E820 interface (limited by the size
of the 'zeropage').  These entries can be duplicated in the
EFI descriptors also passed from the BIOS, and possibly more
entries passed by the EFI interface, which does not have the
E820MAX limit on number of memory map entries.

This code doesn't worry about the likely duplicate, overlapping
or (unlikely) conflicting entries between the EFI map and the
E820 map.  It just dumps all the EFI entries into the memmap[]
array (which already has the E820 entries) and lets the existing
routine sanitize_e820_map() sort the mess out.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Elaborate on the comment for sanitize_e820_map(), epxlaining more what
it does, what it inputs, and what it returns.  Rearrange the placement of
this comment to fit kernel conventions, before the routine's code rather
than buried inside it.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The map size counter passed into, and back out of, sanitize_e820_map(),
was an eight bit type (char or u8), as derived from its origins in
legacy BIOS E820 structures.  This patch changes that type to an 'int',
to allow this sanitize routine to also be used on larger maps (larger
than the 256 count that fits in a char).  The legacy BIOS E820 interface
of course does not change; that remains at 8 bits for this count, holding
up to E820MAX == 128 entries.  But the kernel internals can handle more
when those additional memory map entries are passed from the BIOS via
EFI interfaces.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>