- Jan 11, 2023
-
-
Heiko Carstens authored
The current cmpxchg_double() loops within the perf hw sampling code do not have READ_ONCE() semantics to read the old value from memory. This allows the compiler to generate code which reads the "old" value several times from memory, which again allows for inconsistencies. For example: /* Reset trailer (using compare-double-and-swap) */ do { te_flags = te->flags & ~SDB_TE_BUFFER_FULL_MASK; te_flags |= SDB_TE_ALERT_REQ_MASK; } while (!cmpxchg_double(&te->flags, &te->overflow, te->flags, te->overflow, te_flags, 0ULL)); The compiler could generate code where te->flags used within the cmpxchg_double() call may be refetched from memory and which is not necessarily identical to the previous read version which was used to generate te_flags. Which in turn means that an incorrect update could happen. Fix this by adding READ_ONCE() semantics to all cmpxchg_double() loops. Given that READ_ONCE() cannot generate code on s390 which atomically reads 16 bytes, use a private compare-and-swap-double implementation to achieve that. Also replace cmpxchg_double() with the private implementation to be able to re-use the old value within the loops. As a side effect this converts the whole code to only use bit fields to read and modify bits within the hws trailer header. Reported-by:
Alexander Gordeev <agordeev@linux.ibm.com> Acked-by:
Alexander Gordeev <agordeev@linux.ibm.com> Acked-by:
Hendrik Brueckner <brueckner@linux.ibm.com> Reviewed-by:
Thomas Richter <tmricht@linux.ibm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/linux-s390/Y71QJBhNTIatvxUT@osiris/T/#ma14e2a5f7aa8ed4b94b6f9576799b3ad9c60f333 Signed-off-by:
Heiko Carstens <hca@linux.ibm.com>
-
- Jan 10, 2023
-
-
Alexander Egorenkov authored
This commit addresses the following erroneous situation with file-based kdump executed on a system with a valid IPL report. On s390, a kdump kernel, its initrd and IPL report if present are loaded into a special and reserved on boot memory region - crashkernel. When a system crashes and kdump was activated before, the purgatory code is entered first which swaps the crashkernel and [0 - crashkernel size] memory regions. Only after that the kdump kernel is entered. For this reason, the pointer to an IPL report in lowcore must point to the IPL report after the swap and not to the address of the IPL report that was located in crashkernel memory region before the swap. Failing to do so, makes the kdump's decompressor try to read memory from the crashkernel memory region which already contains the production's kernel memory. The situation described above caused spontaneous kdump failures/hangs on systems where the Secure IPL is activated because on such systems an IPL report is always present. In that case kdump's decompressor tried to parse an IPL report which frequently lead to illegal memory accesses because an IPL report contains addresses to various data. Cc: <stable@vger.kernel.org> Fixes: 99feaa71 ("s390/kexec_file: Create ipl report and pass to next kernel") Reviewed-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by:
Heiko Carstens <hca@linux.ibm.com>
-
- Jan 09, 2023
-
-
Masahiro Yamada authored
Since commit 80b6093b ("kbuild: add -Wundef to KBUILD_CPPFLAGS for W=1 builds"), building with W=1 detects misuse of #(el)if. $ make W=1 ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- [snip] arch/s390/boot/decompressor.c:28:7: warning: "CONFIG_KERNEL_ZSTD" is not defined, evaluates to 0 [-Wundef] 28 | #elif CONFIG_KERNEL_ZSTD | ^~~~~~~~~~~~~~~~~~ This issue has been hidden because arch/s390/boot/Makefile overwrites KBUILD_CFLAGS, dropping -Wundef. CONFIG_KERNEL_ZSTD is a bool option. #elif defined() should be used. The line #ifdef CONFIG_KERNEL_BZIP2 is fine, but I changed it for consistency. Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20230106161024.2373602-1-masahiroy@kernel.org Signed-off-by:
Heiko Carstens <hca@linux.ibm.com>
-
- Jan 06, 2023
-
-
Masahiro Yamada authored
Nathan Chancellor reports that the s390 vmlinux fails to link with GNU ld < 2.36 since commit 99cb0d91 ("arch: fix broken BuildID for arm64 and riscv"). It happens for defconfig, or more specifically for CONFIG_EXPOLINE=y. $ s390x-linux-gnu-ld --version | head -n1 GNU ld (GNU Binutils for Debian) 2.35.2 $ make -s ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- allnoconfig $ ./scripts/config -e CONFIG_EXPOLINE $ make -s ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- olddefconfig $ make -s ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- `.exit.text' referenced in section `.s390_return_reg' of drivers/base/dd.o: defined in discarded section `.exit.text' of drivers/base/dd.o make[1]: *** [scripts/Makefile.vmlinux:34: vmlinux] Error 1 make: *** [Makefile:1252: vmlinux] Error 2 arch/s390/kernel/vmlinux.lds.S wants to keep EXIT_TEXT: .exit.text : { EXIT_TEXT } But, at the same time, EXIT_TEXT is thrown away by DISCARD because s390 does not define RUNTIME_DISCARD_EXIT. I still do not understand why the latter wins after 99cb0d91, but defining RUNTIME_DISCARD_EXIT seems correct because the comment line in arch/s390/kernel/vmlinux.lds.S says: /* * .exit.text is discarded at runtime, not link time, * to deal with references from __bug_table */ Nathan also found that binutils commit 21401fc7bf67 ("Duplicate output sections in scripts") cured this issue, so we cannot reproduce it with binutils 2.36+, but it is better to not rely on it. Fixes: 99cb0d91 ("arch: fix broken BuildID for arm64 and riscv") Link: https://lore.kernel.org/all/Y7Jal56f6UBh1abE@dev-arch.thelio-3990X/ Reported-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20230105031306.1455409-1-masahiroy@kernel.org Signed-off-by:
Heiko Carstens <hca@linux.ibm.com>
-
Alexander Gordeev authored
Symbols _edata and _end in the linker script are the only unaligned expicitly on page boundary. Although _end is aligned implicitly by BSS_SECTION macro that is still inconsistent and could lead to a bug if a tool or function would assume that _edata is as aligned as others. For example, vmem_map_init() function does not align symbols _etext, _einittext etc. Should these symbols be unaligned as well, the size of ranges to update were short on one page. Instead of fixing every occurrence of this kind in the code and external tools just force the alignment on these two symbols. Reviewed-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by:
Heiko Carstens <hca@linux.ibm.com>
-
Niklas Schnelle authored
Using DEBUG_H without a prefix is very generic and inconsistent with other header guards in arch/s390/include/asm. In fact it collides with the same name in the ath9k wireless driver though that depends on !S390 via disabled wireless support. Let's just use a consistent header guard name and prevent possible future trouble. Signed-off-by:
Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by:
Heiko Carstens <hca@linux.ibm.com>
-
- Jan 02, 2023
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Borislav Petkov: - Pass only an initialized perf event attribute to the LSM hook - Fix a use-after-free on the perf syscall's error path - A potential integer overflow fix in amd_core_pmu_init() - Fix the cgroup events tracking after the context handling rewrite - Return the proper value from the inherit_event() function on error * tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Call LSM hook after copying perf_event_attr perf: Fix use-after-free in error path perf/x86/amd: fix potential integer overflow on shift of a int perf/core: Fix cgroup events tracking perf core: Return error pointer if inherit_event() fails to find pmu_ctx
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Two fixes to correct how kprobes handles INT3 now that they're added by other functionality like the rethunks and not only kgdb - Remove __init section markings of two functions which are referenced by a function in the .text section * tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK x86/calldepth: Fix incorrect init section references
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Borislav Petkov: - Prevent the leaking of a debug timer in futex_waitv() - A preempt-RT mutex locking fix, adding the proper acquire semantics * tag 'locking_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Fix futex_waitv() hrtimer debug object leak on kcalloc error rtmutex: Add acquire semantics for rtmutex lock acquisition slow path
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Daniel Vetter: "I'm just back from the mountains, and Dave is out at the beach and should be back in a week again. Just i915 fixes and since Rodrigo bothered to make the pull last week I figured I should warm up gpg and forward this in a nice signed tag as a new years present! - i915 fixes for newer platforms - i915 locking rework to not give up in vm eviction fallback path too early" * tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm: drm/i915/dsi: fix MIPI_BKLT_EN_1 native GPIO index drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence drm/i915/uc: Fix two issues with over-size firmware files drm/i915: improve the catch-all evict to handle lock contention drm/i915: Remove __maybe_unused from mtl_info drm/i915: fix TLB invalidation for Gen12.50 video and compute engines
-
- Jan 01, 2023
-
-
Daniel Vetter authored
Merge tag 'drm-intel-fixes-2022-12-30' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - fix TLB invalidation for DG2 and newer platforms. (Andrzej) - Remove __maybe_unused from mtl_info (Lucas) - improve the catch-all evict to handle lock contention (Matt Auld) - Fix two issues with over-size (GuC/HuC) firmware files (John) - Fix DSI resume issues on ICL+ (Jani) Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y662ijDHrZCjTFla@intel.com
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix broken BuildID - Add srcrpm-pkg to the help message - Fix the option order for modpost built with musl libc - Fix the build dependency of rpm-pkg for openSUSE * tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: fixdep: remove unneeded <stdarg.h> inclusion kbuild: sort single-targets alphabetically again kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequires kbuild: Fix running modpost with musl libc kbuild: add a missing line for help message .gitignore: ignore *.rpm arch: fix broken BuildID for arm64 and riscv kconfig: Add static text for search information in help menu
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ata fix from Damien Le Moal: "A single fix to address an issue with wake from suspend with PCS adapters, from Adam" * tag 'ata-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: ahci: Fix PCS quirk application for suspend
-
- Dec 31, 2022
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "These are new ACPI IRQ override quirks, low-power S0 idle (S0ix) support adjustments and ACPI backlight handling fixes, mostly for platforms using AMD chips. Specifics: - Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo 14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik Schumacher). - Adjust ACPI video detection fallback path to prevent non-operational ACPI backlight devices from being created on systems where the native driver does not detect a suitable panel (Mario Limonciello). - Fix Apple GMUX backlight detection (Hans de Goede). - Add a low-power S0 idle (S0ix) handling quirk for HP Elitebook 865 and stop using AMD-specific low-power S0 idle code path for systems with Rembrandt chips and newer (Mario Limonciello)" * tag 'acpi-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+ ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865 ACPI: video: Fix Apple GMUX backlight detection ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks ACPI: resource: do IRQ override on Lenovo 14ALC7 ACPI: resource: do IRQ override on XMG Core 15 ACPI: video: Don't enable fallback path for creating ACPI backlight by default drm/amd/display: Report to ACPI video if no panels were found ACPI: video: Allow GPU drivers to report no panels
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Just a few small fixes: - A regression fix for HDMI audio on HD-audio AMD codecs - Fixes for LINE6 MIDI handling - HD-audio quirk for Dell laptops" * tag 'sound-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/hdmi: Static PCM mapping again with AMD HDMI codecs ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops ALSA: line6: fix stack overflow in line6_midi_transmit ALSA: line6: correct midi status byte when receiving data from podxt
-
- Dec 30, 2022
-
-
Rafael J. Wysocki authored
Merge ACPI resource handling quirks and ACPI backlight handling fixes for 6.2-rc2: - Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo 14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik Schumacher). - Adjust ACPI video detection fallback path to prevent non-operational ACPI backlight devices from being created on systems where the native driver does not detect a suitable panel (Mario Limonciello). - Fix Apple GMUX backlight detection (Hans de Goede). * acpi-resource: ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks ACPI: resource: do IRQ override on Lenovo 14ALC7 ACPI: resource: do IRQ override on XMG Core 15 * acpi-video: ACPI: video: Fix Apple GMUX backlight detection ACPI: video: Don't enable fallback path for creating ACPI backlight by default drm/amd/display: Report to ACPI video if no panels were found ACPI: video: Allow GPU drivers to report no panels
-
Jani Nikula authored
Due to copy-paste fail, MIPI_BKLT_EN_1 would always use PPS index 1, never 0. Fix the sloppiest commit in recent memory. Fixes: 963bbdb3 ("drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence") Reported-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221220140105.313333-1-jani.nikula@intel.com (cherry picked from commit a561933c ) Cc: stable@vger.kernel.org # 6.1 Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Jani Nikula authored
Starting from ICL, the default for MIPI GPIO sequences seems to be using native GPIOs i.e. GPIOs available in the GPU. These native GPIOs reuse many pins that quite frankly seem scary to poke based on the VBT sequences. We pretty much have to trust that the board is configured such that the relevant HPD, PP_CONTROL and GPIO bits aren't used for anything else. MIPI sequence v4 also adds a flag to fall back to non-native sequences. v5: - Wrap SHOTPLUG_CTL_DDI modification in spin_lock() in icp_irq_handler() too (Ville) - References instead of Closes issue 6131 because this does not fix everything v4: - Wrap SHOTPLUG_CTL_DDI modification in spin_lock_irq() (Ville) v3: - Fix -Wbitwise-conditional-parentheses (kernel test robot <lkp@intel.com>) v2: - Fix HPD pin output set (impacts GPIOs 0 and 5) - Fix GPIO data output direction set (impacts GPIOs 4 and 9) - Reduce register accesses to single intel_de_rwm() References: https://gitlab.freedesktop.org/drm/intel/-/issues/6131 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221219105955.4014451-1-jani.nikula@intel.com (cherry picked from commit f087cfe6 ) Cc: stable@vger.kernel.org # 6.1 Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Masahiro Yamada authored
This is unneeded since commit 69304379 ("fixdep: use fflush() and ferror() to ensure successful write to files"). Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
Masahiro Yamada authored
This was previously alphabetically sorted. Sort it again. Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Reviewed-by:
Miguel Ojeda <ojeda@kernel.org> Reviewed-by:
Nathan Chancellor <nathan@kernel.org>
-
Masahiro Yamada authored
Guoqing Jiang reports that openSUSE cannot compile the kernel rpm due to "BuildRequires: elfutils-libelf-devel" added by commit 8818039f ("kbuild: add ability to make source rpm buildable using koji"). The relevant package name in openSUSE is libelf-devel. Add it as an alternative package. BTW, if it is impossible to solve the build requirement, the final resort would be: $ make RPMOPTS=--nodeps rpm-pkg This passes --nodeps to the rpmbuild command so it will not verify build dependencies. This is useful to test rpm builds on non-rpm system. On Debian/Ubuntu, for example, you can install rpmbuild by 'apt-get install rpm'. NOTE1: Likewise, it is possible to bypass the build dependency check for debian package builds: $ make DPKG_FLAGS=-d deb-pkg NOTE2: The 'or' operator is supported since RPM 4.13. So, old distros such as CentOS 7 will break. I suggest installing newer rpmbuild in such cases. Link: https://lore.kernel.org/linux-kbuild/ee227d24-9c94-bfa3-166a-4ee6b5dfea09@linux.dev/T/#u Fixes: 8818039f ("kbuild: add ability to make source rpm buildable using koji") Reported-by:
Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Tested-by:
Guoqing Jiang <guoqing.jiang@linux.dev> Acked-by:
Jonathan Toppins <jtoppins@redhat.com>
-
Samuel Holland authored
commit 3d57e1b7 ("kbuild: refactor the prerequisites of the modpost rule") moved 'vmlinux.o' inside modpost-args, possibly before some of the other options. However, getopt() in musl libc follows POSIX and stops looking for options upon reaching the first non-option argument. As a result, the '-T' option is misinterpreted as a positional argument, and the build fails: make -f ./scripts/Makefile.modpost scripts/mod/modpost -E -o Module.symvers vmlinux.o -T modules.order -T: No such file or directory make[1]: *** [scripts/Makefile.modpost:137: Module.symvers] Error 1 make: *** [Makefile:1960: modpost] Error 2 The fix is to move all options before 'vmlinux.o' in modpost-args. Fixes: 3d57e1b7 ("kbuild: refactor the prerequisites of the modpost rule") Signed-off-by:
Samuel Holland <samuel@sholland.org> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
Jun ASAKA authored
The help message line for building the source RPM package was missing. Added it. Signed-off-by:
Jun ASAKA <JunASAKA@zzy040330.moe> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
Masahiro Yamada authored
Previously, *.rpm files were created under $HOME/rpmbuild/, but since commit 8818039f ("kbuild: add ability to make source rpm buildable using koji"), srcrpm-pkg creates the source rpm in the kernel tree because it sets '_srcrpmdir'. Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
Masahiro Yamada authored
Dennis Gilmore reports that the BuildID is missing in the arm64 vmlinux since commit 994b7ac1 ("arm64: remove special treatment for the link order of head.o"). The issue is that the type of .notes section, which contains the BuildID, changed from NOTES to PROGBITS. Ard Biesheuvel figured out that whichever object gets linked first gets to decide the type of a section. The PROGBITS type is the result of the compiler emitting .note.GNU-stack as PROGBITS rather than NOTE. While Ard provided a fix for arm64, I want to fix this globally because the same issue is happening on riscv since commit 2348e6bf ("riscv: remove special treatment for the link order of head.o"). This problem will happen in general for other architectures if they start to drop unneeded entries from scripts/head-object-list.txt. Discard .note.GNU-stack in include/asm-generic/vmlinux.lds.h. Link: https://lore.kernel.org/lkml/CAABkxwuQoz1CTbyb57n0ZX65eSYiTonFCU8-LCQc=74D=xE=rA@mail.gmail.com/ Fixes: 994b7ac1 ("arm64: remove special treatment for the link order of head.o") Fixes: 2348e6bf ("riscv: remove special treatment for the link order of head.o") Reported-by:
Dennis Gilmore <dennis@ausil.us> Suggested-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Acked-by:
Palmer Dabbelt <palmer@rivosinc.com>
-
John Harrison authored
In the case where a firmware file is too large (e.g. someone downloaded a web page ASCII dump from github...), the firmware object is released but the pointer is not zerod. If no other firmware file was found then release would be called again leading to a double kfree. Also, the size check was only being applied to the initial firmware load not any of the subsequent attempts. So move the check into a wrapper that is used for all loads. Fixes: 01624116 ("drm/i915/uc: use different ggtt pin offsets for uc loads") Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221221193031.687266-4-John.C.Harrison@Intel.com (cherry picked from commit 4071d98b ) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Matthew Auld authored
The catch-all evict can fail due to object lock contention, since it only goes as far as trylocking the object, due to us already holding the vm->mutex. Doing a full object lock here can deadlock, since the vm->mutex is always our inner lock. Add another execbuf pass which drops the vm->mutex and then tries to grab the object will the full lock, before then retrying the eviction. This should be good enough for now to fix the immediate regression with userspace seeing -ENOSPC from execbuf due to contended object locks during GTT eviction. v2 (Mani) - Also revamp the docs for the different passes. Testcase: igt@gem_ppgtt@shrink-vs-evict-* Fixes: 7e00897b ("drm/i915: Add object locking to i915_gem_evict_for_node and i915_gem_evict_something, v2.") References: https://gitlab.freedesktop.org/drm/intel/-/issues/7627 References: https://gitlab.freedesktop.org/drm/intel/-/issues/7570 References: https://bugzilla.mozilla.org/show_bug.cgi?id=1779558 Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Mani Milani <mani@chromium.org> Cc: <stable@vger.kernel.org> # v5.18+ Reviewed-by:
Mani Milani <mani@chromium.org> Tested-by:
Mani Milani <mani@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221216113456.414183-1-matthew.auld@intel.com (cherry picked from commit 801fa7a8 ) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Lucas De Marchi authored
The attribute __maybe_unused should remain only until the respective info is not in the pciidlist. The info can't be added together with its definition because that would cause the driver to automatically probe for the device, while it's still not ready for that. However once pciidlist contains it, the attribute can be removed. Fixes: 78353039 ("drm/i915/mtl: Add MeteorLake PCI IDs") Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221214194944.3670344-1-lucas.demarchi@intel.com (cherry picked from commit 50490ce0 ) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Andrzej Hajda authored
In case of Gen12.50 video and compute engines, TLB_INV registers are masked - to modify one bit, corresponding bit in upper half of the register must be enabled, otherwise nothing happens. Fixes: 77fa9efc ("drm/i915/xehp: Create separate reg definitions for new MCR registers") Signed-off-by:
Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by:
Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221214075439.402485-1-andrzej.hajda@intel.com (cherry picked from commit 4d5cf7b1 ) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull block fixes from Jens Axboe: "Mostly just NVMe, but also a single fixup for BFQ for a regression that happened during the merge window. In detail: - NVMe pull requests via Christoph: - Fix doorbell buffer value endianness (Klaus Jensen) - Fix Linux vs NVMe page size mismatch (Keith Busch) - Fix a potential use memory access beyong the allocation limit (Keith Busch) - Fix a multipath vs blktrace NULL pointer dereference (Yanjun Zhang) - Fix various problems in handling the Command Supported and Effects log (Christoph Hellwig) - Don't allow unprivileged passthrough of commands that don't transfer data but modify logical block content (Christoph Hellwig) - Add a features and quirks policy document (Christoph Hellwig) - Fix some really nasty code that was correct but made smatch complain (Sagi Grimberg) - Use-after-free regression in BFQ from this merge window (Yu)" * tag 'block-6.2-2022-12-29' of git://git.kernel.dk/linux: nvme-auth: fix smatch warning complaints nvme: consult the CSE log page for unprivileged passthrough nvme: also return I/O command effects from nvme_command_effects nvmet: don't defer passthrough commands with trivial effects to the workqueue nvmet: set the LBCC bit for commands that modify data nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding it nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition docs, nvme: add a feature and quirk policy document nvme-pci: update sqsize when adjusting the queue depth nvme: fix setting the queue depth in nvme_alloc_io_tag_set block, bfq: fix uaf for bfqq in bfq_exit_icq_bfqq nvme: fix multipath crash caused by flush request when blktrace is enabled nvme-pci: fix page size checks nvme-pci: fix mempool alloc size nvme-pci: fix doorbell buffer value endianness
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: - Two fixes for mutex grabbing when the task state is != TASK_RUNNING (me) - Check for invalid opcode in io_uring_register() a bit earlier, to avoid going through the quiesce machinery just to return -EINVAL later in the process (me) - Fix for the uapi io_uring header, skipping including time_types.h when necessary (Stefan) * tag 'io_uring-6.2-2022-12-29' of git://git.kernel.dk/linux: uapi:io_uring.h: allow linux/time_types.h to be skipped io_uring: check for valid register opcode earlier io_uring/cancel: re-grab ctx mutex after finishing wait io_uring: finish waiting before flushing overflow entries
-
Linus Torvalds authored
Merge tag 'linux-kselftest-kunit-fixes-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit fix from Shuah Khan: - alloc_string_stream_fragment() error path fix to free before returning a failure. * tag 'linux-kselftest-kunit-fixes-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: alloc_string_stream_fragment error handling bug fix
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "Changes that were posted too late for 6.1, or after the release. x86: - several fixes to nested VMX execution controls - fixes and clarification to the documentation for Xen emulation - do not unnecessarily release a pmu event with zero period - MMU fixes - fix Coverity warning in kvm_hv_flush_tlb() selftests: - fixes for the ucall mechanism in selftests - other fixes mostly related to compilation with clang" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (41 commits) KVM: selftests: restore special vmmcall code layout needed by the harness Documentation: kvm: clarify SRCU locking order KVM: x86: fix deadlock for KVM_XEN_EVTCHN_RESET KVM: x86/xen: Documentation updates and clarifications KVM: x86/xen: Add KVM_XEN_INVALID_GPA and KVM_XEN_INVALID_GFN to uapi KVM: x86/xen: Simplify eventfd IOCTLs KVM: x86/xen: Fix SRCU/RCU usage in readers of evtchn_ports KVM: x86/xen: Use kvm_read_guest_virt() instead of open-coding it badly KVM: x86/xen: Fix memory leak in kvm_xen_write_hypercall_page() KVM: Delete extra block of "};" in the KVM API documentation kvm: x86/mmu: Remove duplicated "be split" in spte.h kvm: Remove the unused macro KVM_MMU_READ_{,UN}LOCK() MAINTAINERS: adjust entry after renaming the vmx hyperv files KVM: selftests: Mark correct page as mapped in virt_map() KVM: arm64: selftests: Don't identity map the ucall MMIO hole KVM: selftests: document the default implementation of vm_vaddr_populate_bitmap KVM: selftests: Use magic value to signal ucall_alloc() failure KVM: selftests: Disable "gnu-variable-sized-type-not-at-end" warning KVM: selftests: Include lib.mk before consuming $(CC) KVM: selftests: Explicitly disable builtins for mem*() overrides ...
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Christoph: "nvme fixes for Linux 6.2 - fix various problems in handling the Command Supported and Effects log (Christoph Hellwig) - don't allow unprivileged passthrough of commands that don't transfer data but modify logical block content (Christoph Hellwig) - add a features and quirks policy document (Christoph Hellwig) - fix some really nasty code that was correct but made smatch complain (Sagi Grimberg)" * tag 'nvme-6.2-2022-12-29' of git://git.infradead.org/nvme: nvme-auth: fix smatch warning complaints nvme: consult the CSE log page for unprivileged passthrough nvme: also return I/O command effects from nvme_command_effects nvmet: don't defer passthrough commands with trivial effects to the workqueue nvmet: set the LBCC bit for commands that modify data nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding it nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition docs, nvme: add a feature and quirk policy document
-
- Dec 29, 2022
-
-
Bhaskar Chowdhury authored
Add few static text to explain how one can bring up the search dialog box by pressing the forward slash key anywhere on this interface. Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
Sagi Grimberg authored
When initializing auth context, there may be no secrets passed by the user. Make return code explicit when returning successfully. smatch warnings: drivers/nvme/host/auth.c:950 nvme_auth_init_ctrl() warn: missing error code? 'ret' Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Christoph Hellwig authored
Commands like Write Zeros can change the contents of a namespaces without actually transferring data. To protect against this, check the Commands Supported and Effects log is supported by the controller for any unprivileg command passthrough and refuse unprivileged passthrough if the command has any effects that can change data or metadata. Note: While the Commands Support and Effects log page has only been mandatory since NVMe 2.0, it is widely supported because Windows requires it for any command passthrough from userspace. Fixes: e4fbcf32 ("nvme: identify-namespace without CAP_SYS_ADMIN") Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Kanchan Joshi <joshi.k@samsung.com>
-
Christoph Hellwig authored
To be able to use the Commands Supported and Effects Log for allowing unprivileged passtrough, it needs to be corretly reported for I/O commands as well. Return the I/O command effects from nvme_command_effects, and also add a default list of effects for the NVM command set. For other command sets, the Commands Supported and Effects log is required to be present already. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Kanchan Joshi <joshi.k@samsung.com>
-
Christoph Hellwig authored
Mask out the "Command Supported" and "Logical Block Content Change" bits and only defer execution of commands that have non-trivial effects to the workqueue for synchronous execution. This allows to execute admin commands asynchronously on controllers that provide a Command Supported and Effects log page, and will keep allowing to execute Write commands asynchronously once command effects on I/O commands are taken into account. Fixes: c1fef73f ("nvmet: add passthru code to process commands") Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Kanchan Joshi <joshi.k@samsung.com>
-