[Why]
connector hdcp properties are lost after display is
unplgged from mst hub. connector is destroyed with
dm_dp_mst_connector_destroy. when display is plugged
back, hdcp is not desired and it wouldnt be enabled.

[How]
save hdcp properties into hdcp_work within
amdgpu_dm_atomic_commit_tail. If the same display is
plugged back with same display index, its hdcp
properties will be retrieved from hdcp_work within
dm_dp_mst_get_modes.

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

To fit the latest PMFW and suppress the warning emerged on driver loading.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add the support for WINDOW3D profile mode as for other profile modes.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It's also part of gfxoff.

Cc: stable@vger.kernel.org # 6.0, 6.1
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit e5d59cfa

.

This is no longer needed since we no longer suspend SDMA during
S0ix.

Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit f543d286

.

This is no longer needed since we no longer touch SDMA 5.x for s0i3.

Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

SDMA 5.x is part of the GFX block so it's controlled via
GFXOFF.  Skip suspend as it should be handled the same
as GFX.

v2: drop SDMA 4.x.  That requires special handling.

Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It's handled by GFXOFF for SDMA 5.x and SMU saves the state on
SDMA 4.x.

Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

gfxhub registers are part of gfx IP and should not need to be
changed.  Doing so without disabling gfxoff can hang the gfx IP.

v2: add comments explaining why we can skip the interrupt
    control for S0i3

Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

gfxhub registers are part of gfx IP and should not need to be
changed.  Doing so without disabling gfxoff can hang the gfx IP.

v2: add comments explaining why we can skip the interrupt
    control for S0i3

Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

gfxhub registers are part of gfx IP and should not need to be
changed.  Doing so without disabling gfxoff can hang the gfx IP.

v2: add comments explaining why we can skip the interrupt
    control for S0i3

Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The activity_monitor_external[] array is too big to fit on the
kernel stack, resulting in this warning with clang:

drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0_7_ppt.c:1438:12: error: stack frame size (1040) exceeds limit (1024) in 'smu_v13_0_7_get_power_profile_mode' [-Werror,-Wframe-larger-than]

Use dynamic allocation instead. It should also be possible to
have single element here instead of the array, but this seems
easier.

v2: fix up argument to sizeof() (Alex)

Fixes: 334682ae

 ("drm/amd/pm: enable workload type change on smu_v13_0_7")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The .set_odm_combine callback pointer was added twice, causing
a harmless -Wextra warning:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_optc.c:258:36: error: initialized field overwritten [-Werror=override-init]
  258 |                 .set_odm_combine = optc314_set_odm_combine,
      |                                    ^~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_optc.c:258:36: note: (near initialization for 'dcn314_tg_funcs.set_odm_combine')

Fixes: 5ade1b95

 ("drm/amd/display: Add OTG/ODM functions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

If kfd_process_device_init_vm returns failure after vm is converted to
compute vm and vm->pasid set to compute pasid, KFD will not take
pdd->drm_file reference. As a result, drm close file handler maybe
called to release the compute pasid before KFD process destroy worker to
release the same pasid and set vm->pasid to zero, this generates below
WARNING backtrace and NULL pointer access.

Add helper amdgpu_amdkfd_gpuvm_set_vm_pasid and call it at the last step
of kfd_process_device_init_vm, to ensure vm pasid is the original pasid
if acquiring vm failed or is the compute pasid with pdd->drm_file
reference taken to avoid double release same pasid.

 amdgpu: Failed to create process VM object
 ida_free called for id=32770 which is not allocated.
 WARNING: CPU: 57 PID: 72542 at ../lib/idr.c:522 ida_free+0x96/0x140
 RIP: 0010:ida_free+0x96/0x140
 Call Trace:
  amdgpu_pasid_free_delayed+0xe1/0x2a0 [amdgpu]
  amdgpu_driver_postclose_kms+0x2d8/0x340 [amdgpu]
  drm_file_free.part.13+0x216/0x270 [drm]
  drm_close_helper.isra.14+0x60/0x70 [drm]
  drm_release+0x6e/0xf0 [drm]
  __fput+0xcc/0x280
  ____fput+0xe/0x20
  task_work_run+0x96/0xc0
  do_exit+0x3d0/0xc10

 BUG: kernel NULL pointer dereference, address: 0000000000000000
 RIP: 0010:ida_free+0x76/0x140
 Call Trace:
  amdgpu_pasid_free_delayed+0xe1/0x2a0 [amdgpu]
  amdgpu_driver_postclose_kms+0x2d8/0x340 [amdgpu]
  drm_file_free.part.13+0x216/0x270 [drm]
  drm_close_helper.isra.14+0x60/0x70 [drm]
  drm_release+0x6e/0xf0 [drm]
  __fput+0xcc/0x280
  ____fput+0xe/0x20
  task_work_run+0x96/0xc0
  do_exit+0x3d0/0xc10

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Should only destroy the ib_mem and let process cleanup worker to free
the outstanding BOs. Reset the pointer in pdd->qpd structure, to avoid
NULL pointer access in process destroy worker.

 BUG: kernel NULL pointer dereference, address: 0000000000000010
 Call Trace:
  amdgpu_amdkfd_gpuvm_unmap_gtt_bo_from_kernel+0x46/0xb0 [amdgpu]
  kfd_process_device_destroy_cwsr_dgpu+0x40/0x70 [amdgpu]
  kfd_process_destroy_pdds+0x71/0x190 [amdgpu]
  kfd_process_wq_release+0x2a2/0x3b0 [amdgpu]
  process_one_work+0x2a1/0x600
  worker_thread+0x39/0x3d0

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add poison mode query support on df v4_3.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add df v4_3 header files.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Update AMDGPU_INFO_DEV_INFO IOCTL for minimum engine and memory clock.
And update AMDGPU_INFO_SENSOR IOCTL for PEAK_PSTATE engine and memory clock.
User applications can better utilize these IOCTLs to get needed informations.

Increase the minor version number to indicate that the new flags are
available.

Proposed mesa patch:
https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/278

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Otherwise, some UMD tools will treate them as 0 at default while
actually they are not.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Expose those informations to UMD who need them as for standard
profiling mode.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable peak profiling mode shader/memory clock reporting for powerplay
framework.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable peak profiling mode shader/memory clocks reporting for swsmu
framework.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The API is not in use. And it's unlikely to be used in
the future either.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The missing DPCD definitions from DP2.0 spec is as follows:

DOWNSPREAD_CTRL (107h):
	FIXED_VTOTAL_AS_SDP_EN_IN_PR_ACTIVE (bit 6)
		For sink devices that support Adaptive-Sync operation
		and Panel Replay

DPRX_FEATURE_ENUMERATION_LIST_CONT_1 (2214h):
	ADAPTIVE_SYNC_SDP_SUPPORTED (bit 0)
		Bit to check sink device has Adaptive-Sync capability
	AS_SDP_FIRST_HALF_LINE_OR_3840_PIXEL_CYCLE_WINDOW_NOT_SUPPORTED (bit 1)
		A sink device that clears this bit will generate VSync pulse
		leading edge of the HDMI output on the line count at which
		Adaptive-Sync SDP is received as long as source device transmits
		Adaptive-Sync SDP either in first line or first 3840 pixel cycles
		of the line whichever occurs first.
	VSC_EXT_SDP_FRAMEWORK_VERSION_1_SUPPORTED (bit 4)
		Bit to check sink device has SDP framework version 1 capability

Signed-off-by: Sung Joon Kim <Sungjoon.Kim@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

One-element arrays are deprecated, and we are replacing them with
flexible array members instead. So, replace one-element array with
flexible-array member in structs _ATOM_DISPLAY_OBJECT_PATH,
_ATOM_DISPLAY_OBJECT_PATH_TABLE, _ATOM_OBJECT_TABLE, GOP_VBIOS_CONTENT
_ATOM_GPIO_VOLTAGE_OBJECT_V3 and refactor the rest of the code accordingly.

It's worth mentioning that doing a build before/after this patch
results in no binary output differences.

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/239
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1]

Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1. no need to query poison mode on SRIOV guest side, host can handle it.
2. define the function to simplify code.

v2: rename amdgpu_ras_poison_mode_query to amdgpu_ras_query_poison_mode.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Support VCN/JPEG RAS in both bare metal and SRIOV environment.

v2: update commit description.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Injection on guest is not allowed.

v2: return directly in SRIOV environment.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Inform host and let host handle consumption interrupt.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Send message to PF if VF receives RAS poison consumption interrupt.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Send handling request to host.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Send message to host and host will handle it.

v2: split the patch into two parts, one is for mxgpu ai and another one
is for common poison consumption handler.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Description]
- Current policy does not support HDMI VRR by default, so we
  cannot enable FPO / SubVP (DRR) cases

Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This version brings along following fixes:

-Fix array index out of bound error
-Speed up DML fast vadlaite
-Implement multiple secure display
-MST HDCP for multiple display
-Add DPIA notification
-Add support for three new square pattern variant

Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why && How]
On dcn32, HW supports odm transition in fast update. Hence this
error message is considered false positive. Downgrade the error level
to avoid catching unnecessary attention.

Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
DP2.1 specs has brought 3 new variants of sqaure patterns with different
pre-shoot and de-emphasis equalization requirements. The commit adds
logic to identify these variants and apply corresponding eqaulization
requirements into hardware lane settings.

Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY]
Subvp portion validation currently assumes that if vlevel provided does not
support pstate, then none will, and so subvp is not used.

[HOW]
After get vlevel, use lowest vlevel that supports pstate if it
exists, and use that for subvp validation.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
When we have a PSR display, we will not be requesting data from memory anymore.
So we report back true for no memory request case.

[How]
Check for PSR by checking PSR version in link settings

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Description]
- When merging a pipe that was previously pipe split, we need
  to also clear the link resources or the next stream/plane that
  uses the pipe may have an incorrect link resource state

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY]
Adding the new DPIA NOTIFY packets from DMUB
As per the design with Cruise to account for
250ms response delay otherwise

[HOW]
Added th DPIA NOTIFY logic as per DMUB logic

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>