Skip to content
  1. May 19, 2021
    • Sagi Grimberg's avatar
      nvme-tcp: fix possible use-after-completion · 825619b0
      Sagi Grimberg authored 
      Commit db5ad6b7

 ("nvme-tcp: try to send request in queue_rq
context") added a second context that may perform a network send.
This means that now RX and TX are not serialized in nvme_tcp_io_work
and can run concurrently.

While there is correct mutual exclusion in the TX path (where
the send_mutex protect the queue socket send activity) RX activity,
and more specifically request completion may run concurrently.

This means we must guarantee that any mutation of the request state
related to its lifetime, bytes sent must not be accessed when a completion
may have possibly arrived back (and processed).

The race may trigger when a request completion arrives, processed
_and_ reused as a fresh new request, exactly in the (relatively short)
window between the last data payload sent and before the request iov_iter
is advanced.

Consider the following race:
1. 16K write request is queued
2. The nvme command and the data is sent to the controller (in-capsule
   or solicited by r2t)
3. After the last payload is sent but before the req.iter is advanced,
   the controller sends back a completion.
4. The completion is processed, the request is completed, and reused
   to transfer a new request (write or read)
5. The new request is queued, and the driver reset the request parameters
   (nvme_tcp_setup_cmd_pdu).
6. Now context in (2) resumes execution and advances the req.iter

==> use-after-completion as this is already a new request.

Fix this by making sure the request is not advanced after the last
data payload send, knowing that a completion may have arrived already.

An alternative solution would have been to delay the request completion
or state change waiting for reference counting on the TX path, but besides
adding atomic operations to the hot-path, it may present challenges in
multi-stage R2T scenarios where a r2t handler needs to be deferred to
an async execution.

Reported-by: default avatarNarayan Ayalasomayajula <narayan.ayalasomayajula@wdc.com>
Tested-by: default avatarAnil Mishra <anil.mishra@wdc.com>
Reviewed-by: default avatarKeith Busch <kbusch@kernel.org>
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: default avatarSagi Grimberg <sagi@grimberg.me>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      825619b0
    • Wu Bo's avatar
      nvme-loop: fix memory leak in nvme_loop_create_ctrl() · 03504e3b
      Wu Bo authored 
      When creating loop ctrl in nvme_loop_create_ctrl(), if nvme_init_ctrl()
fails, the loop ctrl should be freed before jumping to the "out" label.

Fixes: 3a85a5de

 ("nvme-loop: add a NVMe loopback host driver")
Signed-off-by: default avatarWu Bo <wubo40@huawei.com>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      03504e3b
    • Wu Bo's avatar
      nvmet: fix memory leak in nvmet_alloc_ctrl() · fec356a6
      Wu Bo authored 
      When creating ctrl in nvmet_alloc_ctrl(), if the cntlid_min is larger
than cntlid_max of the subsystem, and jumps to the
"out_free_changed_ns_list" label, but the ctrl->sqs lack of be freed.
Fix this by jumping to the "out_free_sqs" label.

Fixes: 94a39d61

 ("nvmet: make ctrl-id configurable")
Signed-off-by: default avatarWu Bo <wubo40@huawei.com>
Reviewed-by: default avatarSagi Grimberg <sagi@grimberg.me>
Reviewed-by: default avatarChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      fec356a6
  3. May 14, 2021
  5. May 13, 2021
    • Hou Pu's avatar
      nvmet: use new ana_log_size instead the old one · e181811b
      Hou Pu authored 
      The new ana_log_size should be used instead of the old one.
Or kernel NULL pointer dereference will happen like below:

[   38.957849][   T69] BUG: kernel NULL pointer dereference, address: 000000000000003c
[   38.975550][   T69] #PF: supervisor write access in kernel mode
[   38.975955][   T69] #PF: error_code(0x0002) - not-present page
[   38.976905][   T69] PGD 0 P4D 0
[   38.979388][   T69] Oops: 0002 [#1] SMP NOPTI
[   38.980488][   T69] CPU: 0 PID: 69 Comm: kworker/0:2 Not tainted 5.12.0+ #54
[   38.981254][   T69] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[   38.982502][   T69] Workqueue: events nvme_loop_execute_work
[   38.985219][   T69] RIP: 0010:memcpy_orig+0x68/0x10f
[   38.986203][   T69] Code: 83 c2 20 eb 44 48 01 d6 48 01 d7 48 83 ea 20 0f 1f 00 48 83 ea 20 4c 8b 46 f8 4c 8b 4e f0 4c 8b 56 e8 4c 8b 5e e0 48 8d 76 e0 <4c> 89 47 f8 4c 89 4f f0 4c 89 57 e8 4c 89 5f e0 48 8d 7f e0 73 d2
[   38.987677][   T69] RSP: 0018:ffffc900001b7d48 EFLAGS: 00000287
[   38.987996][   T69] RAX: 0000000000000020 RBX: 0000000000000024 RCX: 0000000000000010
[   38.988327][   T69] RDX: ffffffffffffffe4 RSI: ffff8881084bc004 RDI: 0000000000000044
[   38.988620][   T69] RBP: 0000000000000024 R08: 0000000100000000 R09: 0000000000000000
[   38.988991][   T69] R10: 0000000100000000 R11: 0000000000000001 R12: 0000000000000024
[   38.989289][   T69] R13: ffff8881084bc000 R14: 0000000000000000 R15: 0000000000000024
[   38.989845][   T69] FS:  0000000000000000(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000
[   38.990234][   T69] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   38.990490][   T69] CR2: 000000000000003c CR3: 00000001085b2000 CR4: 00000000000006f0
[   38.991105][   T69] Call Trace:
[   38.994157][   T69]  sg_copy_buffer+0xb8/0xf0
[   38.995357][   T69]  nvmet_copy_to_sgl+0x48/0x6d
[   38.995565][   T69]  nvmet_execute_get_log_page_ana+0xd4/0x1cb
[   38.995792][   T69]  nvmet_execute_get_log_page+0xc9/0x146
[   38.995992][   T69]  nvme_loop_execute_work+0x3e/0x44
[   38.996181][   T69]  process_one_work+0x1c3/0x3c0
[   38.996393][   T69]  worker_thread+0x44/0x3d0
[   38.996600][   T69]  ? cancel_delayed_work+0x90/0x90
[   38.996804][   T69]  kthread+0xf7/0x130
[   38.996961][   T69]  ? kthread_create_worker_on_cpu+0x70/0x70
[   38.997171][   T69]  ret_from_fork+0x22/0x30
[   38.997705][   T69] Modules linked in:
[   38.998741][   T69] CR2: 000000000000003c
[   39.000104][   T69] ---[ end trace e719927b609d0fa0 ]---

Fixes: 5e1f6899

 ("nvme-multipath: fix double initialization of ANA state")
Signed-off-by: default avatarHou Pu <houpu.main@gmail.com>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      e181811b
    • Daniel Wagner's avatar
      nvmet: seset ns->file when open fails · 85428bea
      Daniel Wagner authored 
      

Reset the ns->file value to NULL also in the error case in
nvmet_file_ns_enable().

The ns->file variable points either to file object or contains the
error code after the filp_open() call. This can lead to following
problem:

When the user first setups an invalid file backend and tries to enable
the ns, it will fail. Then the user switches over to a bdev backend
and enables successfully the ns. The first received I/O will crash the
system because the IO backend is chosen based on the ns->file value:

static u16 nvmet_parse_io_cmd(struct nvmet_req *req)
{
	[...]

	if (req->ns->file)
		return nvmet_file_parse_io_cmd(req);

	return nvmet_bdev_parse_io_cmd(req);
}

Reported-by: default avatarEnzo Matsumiya <ematsumiya@suse.com>
Signed-off-by: default avatarDaniel Wagner <dwagner@suse.de>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      85428bea
  7. May 12, 2021
    • Sun Ke's avatar
      nbd: share nbd_put and return by goto put_nbd · bedf78c4
      Sun Ke authored 
      

Replace the following two statements by the statement “goto put_nbd;”

	nbd_put(nbd);
	return 0;

Signed-off-by: default avatarSun Ke <sunke32@huawei.com>
Suggested-by: default avatarMarkus Elfring <Markus.Elfring@web.de>
Reviewed-by: default avatarJosef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20210512114331.1233964-3-sunke32@huawei.com


Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      bedf78c4
    • Sun Ke's avatar
      nbd: Fix NULL pointer in flush_workqueue · 79ebe911
      Sun Ke authored 
      Open /dev/nbdX first, the config_refs will be 1 and
the pointers in nbd_device are still null. Disconnect
/dev/nbdX, then reference a null recv_workq. The
protection by config_refs in nbd_genl_disconnect is useless.

[  656.366194] BUG: kernel NULL pointer dereference, address: 0000000000000020
[  656.368943] #PF: supervisor write access in kernel mode
[  656.369844] #PF: error_code(0x0002) - not-present page
[  656.370717] PGD 10cc87067 P4D 10cc87067 PUD 1074b4067 PMD 0
[  656.371693] Oops: 0002 [#1] SMP
[  656.372242] CPU: 5 PID: 7977 Comm: nbd-client Not tainted 5.11.0-rc5-00040-g76c057c84d28 #1
[  656.373661] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
[  656.375904] RIP: 0010:mutex_lock+0x29/0x60
[  656.376627] Code: 00 0f 1f 44 00 00 55 48 89 fd 48 83 05 6f d7 fe 08 01 e8 7a c3 ff ff 48 83 05 6a d7 fe 08 01 31 c0 65 48 8b 14 25 00 6d 01 00 <f0> 48 0f b1 55 d
[  656.378934] RSP: 0018:ffffc900005eb9b0 EFLAGS: 00010246
[  656.379350] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[  656.379915] RDX: ffff888104cf2600 RSI: ffffffffaae8f452 RDI: 0000000000000020
[  656.380473] RBP: 0000000000000020 R08: 0000000000000000 R09: ffff88813bd6b318
[  656.381039] R10: 00000000000000c7 R11: fefefefefefefeff R12: ffff888102710b40
[  656.381599] R13: ffffc900005eb9e0 R14: ffffffffb2930680 R15: ffff88810770ef00
[  656.382166] FS:  00007fdf117ebb40(0000) GS:ffff88813bd40000(0000) knlGS:0000000000000000
[  656.382806] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  656.383261] CR2: 0000000000000020 CR3: 0000000100c84000 CR4: 00000000000006e0
[  656.383819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  656.384370] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  656.384927] Call Trace:
[  656.385111]  flush_workqueue+0x92/0x6c0
[  656.385395]  nbd_disconnect_and_put+0x81/0xd0
[  656.385716]  nbd_genl_disconnect+0x125/0x2a0
[  656.386034]  genl_family_rcv_msg_doit.isra.0+0x102/0x1b0
[  656.386422]  genl_rcv_msg+0xfc/0x2b0
[  656.386685]  ? nbd_ioctl+0x490/0x490
[  656.386954]  ? genl_family_rcv_msg_doit.isra.0+0x1b0/0x1b0
[  656.387354]  netlink_rcv_skb+0x62/0x180
[  656.387638]  genl_rcv+0x34/0x60
[  656.387874]  netlink_unicast+0x26d/0x590
[  656.388162]  netlink_sendmsg+0x398/0x6c0
[  656.388451]  ? netlink_rcv_skb+0x180/0x180
[  656.388750]  ____sys_sendmsg+0x1da/0x320
[  656.389038]  ? ____sys_recvmsg+0x130/0x220
[  656.389334]  ___sys_sendmsg+0x8e/0xf0
[  656.389605]  ? ___sys_recvmsg+0xa2/0xf0
[  656.389889]  ? handle_mm_fault+0x1671/0x21d0
[  656.390201]  __sys_sendmsg+0x6d/0xe0
[  656.390464]  __x64_sys_sendmsg+0x23/0x30
[  656.390751]  do_syscall_64+0x45/0x70
[  656.391017]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

To fix it, just add if (nbd->recv_workq) to nbd_disconnect_and_put().

Fixes: e9e006f5

 ("nbd: fix max number of supported devs")
Signed-off-by: default avatarSun Ke <sunke32@huawei.com>
Reviewed-by: default avatarJosef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20210512114331.1233964-2-sunke32@huawei.com


Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      79ebe911
    • Lin Feng's avatar
      blkdev.h: remove unused codes blk_account_rq · 190515f6
      Lin Feng authored 
      Last users of blk_account_rq gone with patch commit a1ce35fa


("block: remove dead elevator code") and now it gets no caller, it can
be safely removed.

Signed-off-by: default avatarLin Feng <linf@wangsu.com>
Link: https://lore.kernel.org/r/20210512100124.173769-1-linf@wangsu.com


Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      190515f6
    • Paolo Valente's avatar
      block, bfq: avoid circular stable merges · 7ea96eef
      Paolo Valente authored 
      BFQ may merge a new bfq_queue, stably, with the last bfq_queue
created. In particular, BFQ first waits a little bit for some I/O to
flow inside the new queue, say Q2, if this is needed to understand
whether it is better or worse to merge Q2 with the last queue created,
say Q1. This delayed stable merge is performed by assigning
bic->stable_merge_bfqq = Q1, for the bic associated with Q1.

Yet, while waiting for some I/O to flow in Q2, a non-stable queue
merge of Q2 with Q1 may happen, causing the bic previously associated
with Q2 to be associated with exactly Q1 (bic->bfqq = Q1). After that,
Q2 and Q1 may happen to be split, and, in the split, Q1 may happen to
be recycled as a non-shared bfq_queue. In that case, Q1 may then
happen to undergo a stable merge with the bfq_queue pointed by
bic->stable_merge_bfqq. Yet bic->stable_merge_bfqq still points to
Q1. So Q1 would be merged with itself.

This commit fixes this error by intercepting this situation, and
canceling the schedule of the stable merge.

Fixes: 430a67f9

 ("block, bfq: merge bursts of newly-created queues")
Signed-off-by: default avatarPietro Pedroni <pedroni.pietro.96@gmail.com>
Signed-off-by: default avatarPaolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20210512094352.85545-2-paolo.valente@linaro.org


Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      7ea96eef
    • Tejun Heo's avatar
      blk-iocost: fix weight updates of inner active iocgs · e9f4eee9
      Tejun Heo authored 
      

When the weight of an active iocg is updated, weight_updated() is called
which in turn calls __propagate_weights() to update the active and inuse
weights so that the effective hierarchical weights are update accordingly.

The current implementation is incorrect for inner active nodes. For an
active leaf iocg, inuse can be any value between 1 and active and the
difference represents how much the iocg is donating. When weight is updated,
as long as inuse is clamped between 1 and the new weight, we're alright and
this is what __propagate_weights() currently implements.

However, that's not how an active inner node's inuse is set. An inner node's
inuse is solely determined by the ratio between the sums of inuse's and
active's of its children - ie. they're results of propagating the leaves'
active and inuse weights upwards. __propagate_weights() incorrectly applies
the same clamping as for a leaf when an active inner node's weight is
updated. Consider a hierarchy which looks like the following with saturating
workloads in AA and BB.

     R
   /   \
  A     B
  |     |
 AA     BB

1. For both A and B, active=100, inuse=100, hwa=0.5, hwi=0.5.

2. echo 200 > A/io.weight

3. __propagate_weights() update A's active to 200 and leave inuse at 100 as
   it's already between 1 and the new active, making A:active=200,
   A:inuse=100. As R's active_sum is updated along with A's active,
   A:hwa=2/3, B:hwa=1/3. However, because the inuses didn't change, the
   hwi's remain unchanged at 0.5.

4. The weight of A is now twice that of B but AA and BB still have the same
   hwi of 0.5 and thus are doing the same amount of IOs.

Fix it by making __propgate_weights() always calculate the inuse of an
active inner iocg based on the ratio of child_inuse_sum to child_active_sum.

Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Reported-by: default avatarDan Schatzberg <dschatzberg@fb.com>
Fixes: 7caa4715 ("blkcg: implement blk-iocost")
Cc: stable@vger.kernel.org # v5.4+
Link: https://lore.kernel.org/r/YJsxnLZV1MnBcqjj@slm.duckdns.org


Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      e9f4eee9
    • Chaitanya Kulkarni's avatar
      nvmet: demote fabrics cmd parse err msg to debug · 7a4ffd20
      Chaitanya Kulkarni authored 
      

Host can send invalid commands and flood the target with error messages.
Demote the error message from pr_err() to pr_debug() in
nvmet_parse_fabrics_cmd() and nvmet_parse_connect_cmd().

Signed-off-by: default avatarChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      7a4ffd20
    • Chaitanya Kulkarni's avatar
      nvmet: use helper to remove the duplicate code · 4c2dab2b
      Chaitanya Kulkarni authored 
      

Use the helper nvmet_report_invalid_opcode() to report invalid opcode
so we can remove the duplicate code.

Signed-off-by: default avatarChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      4c2dab2b
    • Chaitanya Kulkarni's avatar
      nvmet: demote discovery cmd parse err msg to debug · 3651aaac
      Chaitanya Kulkarni authored 
      

Host can send invalid commands and flood the target with error messages
for the discovery controller. Demote the error message from pr_err() to
pr_debug( in nvmet_parse_discovery_cmd(). 

Signed-off-by: default avatarChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      3651aaac
    • Michal Kalderon's avatar
      nvmet-rdma: Fix NULL deref when SEND is completed with error · 8cc365f9
      Michal Kalderon authored 
      When running some traffic and taking down the link on peer, a
retry counter exceeded error is received. This leads to
nvmet_rdma_error_comp which tried accessing the cq_context to
obtain the queue. The cq_context is no longer valid after the
fix to use shared CQ mechanism and should be obtained similar
to how it is obtained in other functions from the wc->qp.

[ 905.786331] nvmet_rdma: SEND for CQE 0x00000000e3337f90 failed with status transport retry counter exceeded (12).
[ 905.832048] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
[ 905.839919] PGD 0 P4D 0
[ 905.842464] Oops: 0000 1 SMP NOPTI
[ 905.846144] CPU: 13 PID: 1557 Comm: kworker/13:1H Kdump: loaded Tainted: G OE --------- - - 4.18.0-304.el8.x86_64 #1
[ 905.872135] RIP: 0010:nvmet_rdma_error_comp+0x5/0x1b [nvmet_rdma]
[ 905.878259] Code: 19 4f c0 e8 89 b3 a5 f6 e9 5b e0 ff ff 0f b7 75 14 4c 89 ea 48 c7 c7 08 1a 4f c0 e8 71 b3 a5 f6 e9 4b e0 ff ff 0f 1f 44 00 00 <48> 8b 47 48 48 85 c0 74 08 48 89 c7 e9 98 bf 49 00 e9 c3 e3 ff ff
[ 905.897135] RSP: 0018:ffffab601c45fe28 EFLAGS: 00010246
[ 905.902387] RAX: 0000000000000065 RBX: ffff9e729ea2f800 RCX: 0000000000000000
[ 905.909558] RDX: 0000000000000000 RSI: ffff9e72df9567c8 RDI: 0000000000000000
[ 905.916731] RBP: ffff9e729ea2b400 R08: 000000000000074d R09: 0000000000000074
[ 905.923903] R10: 0000000000000000 R11: ffffab601c45fcc0 R12: 0000000000000010
[ 905.931074] R13: 0000000000000000 R14: 0000000000000010 R15: ffff9e729ea2f400
[ 905.938247] FS: 0000000000000000(0000) GS:ffff9e72df940000(0000) knlGS:0000000000000000
[ 905.938249] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 905.950067] nvmet_rdma: SEND for CQE 0x00000000c7356cca failed with status transport retry counter exceeded (12).
[ 905.961855] CR2: 0000000000000048 CR3: 000000678d010004 CR4: 00000000007706e0
[ 905.961855] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 905.961856] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 905.961857] PKRU: 55555554
[ 906.010315] Call Trace:
[ 906.012778] __ib_process_cq+0x89/0x170 [ib_core]
[ 906.017509] ib_cq_poll_work+0x26/0x80 [ib_core]
[ 906.022152] process_one_work+0x1a7/0x360
[ 906.026182] ? create_worker+0x1a0/0x1a0
[ 906.030123] worker_thread+0x30/0x390
[ 906.033802] ? create_worker+0x1a0/0x1a0
[ 906.037744] kthread+0x116/0x130
[ 906.040988] ? kthread_flush_work_fn+0x10/0x10
[ 906.045456] ret_from_fork+0x1f/0x40

Fixes: ca0f1a80

 ("nvmet-rdma: use new shared CQ mechanism")
Signed-off-by: default avatarShai Malin <smalin@marvell.com>
Signed-off-by: default avatarMichal Kalderon <michal.kalderon@marvell.com>
Reviewed-by: default avatarSagi Grimberg <sagi@grimberg.me>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      8cc365f9
    • Chaitanya Kulkarni's avatar
      nvmet: fix inline bio check for passthru · ab96de5d
      Chaitanya Kulkarni authored 
      When handling passthru commands, for inline bio allocation we only
consider the transfer size. This works well when req->sg_cnt fits into
the req->inline_bvec, but it will result in the early return from
bio_add_hw_page() when req->sg_cnt > NVMET_MAX_INLINE_BVEC.

Consider an I/O of size 32768 and first buffer is not aligned to the
page boundary, then I/O is split in following manner :-

[ 2206.256140] nvmet: sg->length 3440 sg->offset 656
[ 2206.256144] nvmet: sg->length 4096 sg->offset 0
[ 2206.256148] nvmet: sg->length 4096 sg->offset 0
[ 2206.256152] nvmet: sg->length 4096 sg->offset 0
[ 2206.256155] nvmet: sg->length 4096 sg->offset 0
[ 2206.256159] nvmet: sg->length 4096 sg->offset 0
[ 2206.256163] nvmet: sg->length 4096 sg->offset 0
[ 2206.256166] nvmet: sg->length 4096 sg->offset 0
[ 2206.256170] nvmet: sg->length 656 sg->offset 0

Now the req->transfer_size == NVMET_MAX_INLINE_DATA_LEN i.e. 32768, but
the req->sg_cnt is (9) > NVMET_MAX_INLINE_BIOVEC which is (8).
This will result in early return in the following code path :-

nvmet_bdev_execute_rw()
	bio_add_pc_page()
		bio_add_hw_page()
			if (bio_full(bio, len))
				return 0;

Use previously introduced helper nvmet_use_inline_bvec() to consider
req->sg_cnt when using inline bio. This only affects nvme-loop
transport.

Fixes: dab3902b

 ("nvmet: use inline bio for passthru fast path")
Signed-off-by: default avatarChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: default avatarSagi Grimberg <sagi@grimberg.me>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      ab96de5d
    • Chaitanya Kulkarni's avatar
      nvmet: fix inline bio check for bdev-ns · 608a9690
      Chaitanya Kulkarni authored 
      When handling rw commands, for inline bio case we only consider
transfer size. This works well when req->sg_cnt fits into the
req->inline_bvec, but it will result in the warning in
__bio_add_page() when req->sg_cnt > NVMET_MAX_INLINE_BVEC.

Consider an I/O size 32768 and first page is not aligned to the page
boundary, then I/O is split in following manner :-

[ 2206.256140] nvmet: sg->length 3440 sg->offset 656
[ 2206.256144] nvmet: sg->length 4096 sg->offset 0
[ 2206.256148] nvmet: sg->length 4096 sg->offset 0
[ 2206.256152] nvmet: sg->length 4096 sg->offset 0
[ 2206.256155] nvmet: sg->length 4096 sg->offset 0
[ 2206.256159] nvmet: sg->length 4096 sg->offset 0
[ 2206.256163] nvmet: sg->length 4096 sg->offset 0
[ 2206.256166] nvmet: sg->length 4096 sg->offset 0
[ 2206.256170] nvmet: sg->length 656 sg->offset 0

Now the req->transfer_size == NVMET_MAX_INLINE_DATA_LEN i.e. 32768, but
the req->sg_cnt is (9) > NVMET_MAX_INLINE_BIOVEC which is (8).
This will result in the following warning message :-

nvmet_bdev_execute_rw()
	bio_add_page()
		__bio_add_page()
			WARN_ON_ONCE(bio_full(bio, len));

This scenario is very hard to reproduce on the nvme-loop transport only
with rw commands issued with the passthru IOCTL interface from the host
application and the data buffer is allocated with the malloc() and not
the posix_memalign().

Fixes: 73383adf

 ("nvmet: don't split large I/Os unconditionally")
Signed-off-by: default avatarChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: default avatarSagi Grimberg <sagi@grimberg.me>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      608a9690
    • Christoph Hellwig's avatar
      nvme-multipath: fix double initialization of ANA state · 5e1f6899
      Christoph Hellwig authored 
      nvme_init_identify and thus nvme_mpath_init can be called multiple
times and thus must not overwrite potentially initialized or in-use
fields.  Split out a helper for the basic initialization when the
controller is initialized and make sure the init_identify path does
not blindly change in-use data structures.

Fixes: 0d0b660f

 ("nvme: add ANA support")
Reported-by: default avatarMartin Wilck <mwilck@suse.com>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarKeith Busch <kbusch@kernel.org>
Reviewed-by: default avatarSagi Grimberg <sagi@grimberg.me>
Reviewed-by: default avatarHannes Reinecke <hare@suse.de>
      5e1f6899
  9. May 11, 2021
    • Omar Sandoval's avatar
      kyber: fix out of bounds access when preempted · efed9a33
      Omar Sandoval authored 
      __blk_mq_sched_bio_merge() gets the ctx and hctx for the current CPU and
passes the hctx to ->bio_merge(). kyber_bio_merge() then gets the ctx
for the current CPU again and uses that to get the corresponding Kyber
context in the passed hctx. However, the thread may be preempted between
the two calls to blk_mq_get_ctx(), and the ctx returned the second time
may no longer correspond to the passed hctx. This "works" accidentally
most of the time, but it can cause us to read garbage if the second ctx
came from an hctx with more ctx's than the first one (i.e., if
ctx->index_hw[hctx->type] > hctx->nr_ctx).

This manifested as this UBSAN array index out of bounds error reported
by Jakub:

UBSAN: array-index-out-of-bounds in ../kernel/locking/qspinlock.c:130:9
index 13106 is out of range for type 'long unsigned int [128]'
Call Trace:
 dump_stack+0xa4/0xe5
 ubsan_epilogue+0x5/0x40
 __ubsan_handle_out_of_bounds.cold.13+0x2a/0x34
 queued_spin_lock_slowpath+0x476/0x480
 do_raw_spin_lock+0x1c2/0x1d0
 kyber_bio_merge+0x112/0x180
 blk_mq_submit_bio+0x1f5/0x1100
 submit_bio_noacct+0x7b0/0x870
 submit_bio+0xc2/0x3a0
 btrfs_map_bio+0x4f0/0x9d0
 btrfs_submit_data_bio+0x24e/0x310
 submit_one_bio+0x7f/0xb0
 submit_extent_page+0xc4/0x440
 __extent_writepage_io+0x2b8/0x5e0
 __extent_writepage+0x28d/0x6e0
 extent_write_cache_pages+0x4d7/0x7a0
 extent_writepages+0xa2/0x110
 do_writepages+0x8f/0x180
 __writeback_single_inode+0x99/0x7f0
 writeback_sb_inodes+0x34e/0x790
 __writeback_inodes_wb+0x9e/0x120
 wb_writeback+0x4d2/0x660
 wb_workfn+0x64d/0xa10
 process_one_work+0x53a/0xa80
 worker_thread+0x69/0x5b0
 kthread+0x20b/0x240
 ret_from_fork+0x1f/0x30

Only Kyber uses the hctx, so fix it by passing the request_queue to
->bio_merge() instead. BFQ and mq-deadline just use that, and Kyber can
map the queues itself to avoid the mismatch.

Fixes: a6088845

 ("block: kyber: make kyber more friendly with merging")
Reported-by: default avatarJakub Kicinski <kuba@kernel.org>
Signed-off-by: default avatarOmar Sandoval <osandov@fb.com>
Link: https://lore.kernel.org/r/c7598605401a48d5cfeadebb678abd10af22b83f.1620691329.git.osandov@fb.com


Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      efed9a33
  11. May 10, 2021
  13. May 09, 2021
  15. May 06, 2021
    • yangerkun's avatar
      block: reexpand iov_iter after read/write · cf7b39a0
      yangerkun authored 
      We get a bug:

BUG: KASAN: slab-out-of-bounds in iov_iter_revert+0x11c/0x404
lib/iov_iter.c:1139
Read of size 8 at addr ffff0000d3fb11f8 by task

CPU: 0 PID: 12582 Comm: syz-executor.2 Not tainted
5.10.0-00843-g352c8610ccd2 #2
Hardware name: linux,dummy-virt (DT)
Call trace:
 dump_backtrace+0x0/0x2d0 arch/arm64/kernel/stacktrace.c:132
 show_stack+0x28/0x34 arch/arm64/kernel/stacktrace.c:196
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x110/0x164 lib/dump_stack.c:118
 print_address_description+0x78/0x5c8 mm/kasan/report.c:385
 __kasan_report mm/kasan/report.c:545 [inline]
 kasan_report+0x148/0x1e4 mm/kasan/report.c:562
 check_memory_region_inline mm/kasan/generic.c:183 [inline]
 __asan_load8+0xb4/0xbc mm/kasan/generic.c:252
 iov_iter_revert+0x11c/0x404 lib/iov_iter.c:1139
 io_read fs/io_uring.c:3421 [inline]
 io_issue_sqe+0x2344/0x2d64 fs/io_uring.c:5943
 __io_queue_sqe+0x19c/0x520 fs/io_uring.c:6260
 io_queue_sqe+0x2a4/0x590 fs/io_uring.c:6326
 io_submi...
      cf7b39a0
  17. May 05, 2021
    • Jens Axboe's avatar
      Merge tag 'nvme-5.13-2021-05-05' of git://git.infradead.org/nvme into block-5.13 · 9c38475c
      Jens Axboe authored 
      Pull NVMe fixes from Christoph:

"nvme updates for Linux 5.13

 - reset the bdev to ns head when failover (Daniel Wagner)
 - remove unsupported command noise (Keith Busch)
 - misc passthrough improvements (Kanchan Joshi)
 - fix controller ioctl through ns_head (Minwoo Im)
 - fix controller timeouts during reset (Tao Chiu)"

* tag 'nvme-5.13-2021-05-05' of git://git.infradead.org/nvme:
  nvmet: remove unsupported command noise
  nvme-multipath: reset bdev to ns head when failover
  nvme-pci: fix controller reset hang when racing with nvme_timeout
  nvme: move the fabrics queue ready check routines to core
  nvme: avoid memset for passthrough requests
  nvme: add nvme_get_ns helper
  nvme: fix controller ioctl through ns_head
      9c38475c
  19. May 04, 2021